Hi I have a LG Sp200 (Sprint) that I cross-flashed a LG K8 (2018) KDZ using LGUP and everything was working fine until I attempted to root the phone by flashing a LG m250DS KDZ. Before flashing the final kdz that bricked my phone, I did make a backup by dumping my firmware using LGUP but I'm not sure how to flash them since my phone is completely dead (no download mode / recovery / boot) The only thing my phone does is show up as LGE mobile serial port, LGE mobile modem port, and MTK usb port. If anyone has any idea or advise on how to get this phone back up it would be greatly appreciated. Thanks
send dump fw
kings1988 said:
hi i have a lg sp200 (sprint) that i cross-flashed a lg k8 (2018) kdz using lgup and everything was working fine until i attempted to root the phone by flashing a lg m250ds kdz. Before flashing the final kdz that bricked my phone, i did make a backup by dumping my firmware using lgup but i'm not sure how to flash them since my phone is completely dead (no download mode / recovery / boot) the only thing my phone does is show up as lge mobile serial port, lge mobile modem port, and mtk usb port. If anyone has any idea or advise on how to get this phone back up it would be greatly appreciated. Thanks
Click to expand...
Click to collapse
could you send me copy of the dumped fw?
never another mediatec
anyone gotta fix...i flashed wrong as well on my sp200....ive spent hours trying to use the sp flash tool with no avail..i cant come up with a good scatter file and i keep getting brom error 006003 ....only recognized on pc for like 3 seconds then nothing..help
same situation here ..
no SP FLASH TOOL firmware , no scatter , no AUTH FILE
Sp200 not bricked?
Please some should kindly help me.. I flashed SP200 with K8 rom, wanting to unlock it, but now wen you on the Sp200 it will show K8+ logo n then move to black screen where"[LGE] [Recovery] [OP Image] op_status: 0 Supported API: 3" keep popping at the base of the screen.
I will love to hear from you soon..
Thanks
Related
Hello guys!
I Have rooted my EURO LG G3 D855, and was trying to custom recovery my phone with the app (Rashr - Flash Tool). DId also try flashify but I couldnt get into recovery mode. When I tried Rashr the last time it did say the successful. So i restarded my phone and the phone was hard bricked.
- I Can get into download mode, but my computer wont fin MTP Device. (Have download the drivers from LG site).
- When i start up my phone it says up in the left corner:
error : Boot certification verify
[620]
[620]Secure booting error!
[620]Cause : booting certification verify
[620]
And the led in the left corner blinks with blue and red light.
Do someone of you guys know how to fix this? Or should i just give up and buy one new phone? :crying:
Hi,
Thanks for using XDA Assist Following Thread may help you in your issue
[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method
Good Luck!
No Response ...Thread Closed
Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.
Dear friends,
I am in deep trouble. Few days ago I have flashed CM rom on my LG G3 F400L. Now the problem is after waking up today I find my set totally dead. I can't enter into recovery mode with holding buttons. The phone stucked into LG logo. Tried many times to flash with LG flash tool. But it says download fail, device model is different.Check ur phone or dll. Tried generic dll but not working. Any help will be much appreciated. Thanks.
How can i fix this? Need help
Flash again using LG Flash Tool, use D838 international version of Lollipop stock rom
Go to 'Download Mode'
Set the flash tool to CDMA+Emergency
Make sure you do everything OFFLINE
My phone got stuck at 90% while flashing D838 ROM. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. My phone now is on a 'bootloop" mode. And I can no longer go to Download mode so I can flash anew.
Any help from our Masters out there?
TIA.
profeduards said:
My phone got stuck at 90% while flashing D838 ROM. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. My phone now is on a 'bootloop" mode. And I can no longer go to Download mode so I can flash anew.
Any help from our Masters out there?
TIA.
Click to expand...
Click to collapse
Take a look at my thread for LG V20, read fastboot tutorial in particular. Most knowledge on my thread applies to LG-D838 which I own too. Just change things accordingly. For instance, instead of LG UP tool use LG Flash tool.
Once you read the articles, you would be your own master. Good Luck.
My LG v10 stuck on LG Logo, but when I attach an USB cable with computer it further goes to att logo and after 3 or 4 spins, it again stuck on att logo. I can get into download mod but not recovery or safe mod. I tried to flash my phone with LGUP but it shoes unknown model. tried with upper cut and common folder options but no luck. LG flash toll 2014 does not detect my phone and application stop responding when I try to read phone information. tried on different computers, different USB cables and different windows but the result is same. Once I had a LG f350 and faced the same problem. Only LG Flash tool 1.8 worked for my LG F350. I am hope full it may work for my LG H900 but I can't find TOT+dll file for LG H900 nowhere. Any one can help please.
I was on 5.1.1. rooted, Super SU and busy box installed when I tried to factory reset my phone and got into this trouble.
More Problems
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Shahidessa said:
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Click to expand...
Click to collapse
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
SandyKick said:
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
Click to expand...
Click to collapse
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Shahidessa said:
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Click to expand...
Click to collapse
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
SandyKick said:
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
Click to expand...
Click to collapse
Great.... I am happy for you... My phone rejected by 3 repair shops as my friend told me.....