Related
Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help
LG E400 ClockWorkMod Recovery Boot Loop
Hello, another android noob here, for 5days stuck with the same problem as TS, and anyone else using the LG (e400) update on CWM atleast v5.8.4.5
* i know this is also discussed in : http://forum.xda-developers.com/showthread.php?t=1610666&page=39, but more centralized would suit this forum, and help a lot of others i think ?
ive tried....
restoring the backup i created with the LG PC Suite software, no luck..
using the lg mobile support tool to restore, error: version not supported !?
installing the following zip's using CWR install from sdcard, except not fixing the boot-loop, the following installed without any problems
stockrom+.zip
stock_recovery_restorer.zip
cm-9-20120831-NIGHTLY-e400.zip
these failed with error:
uninstall-CWR.zip error: error in uninstall-CWR.zip (file on HD seems ok, redownloaded anyway, no change)
CWM-Installer-E400.zip error: installation aborted
LG_E400_Stock_Recovery+MountPoints.zip error: installation aborted
then i tried....
ADB fastboot , after: adb reboot-bootloader , the com4 connection in "xp: devices: ports" disappears, and adb devices + fastboot devices cant find the phone
last 5 lines on phone itself:
udc.start
reset
portchange
reset
portchange
* the phone hasnt crashed at this point, each time when i reconnect the usb it will reset and portchange (twice)
* a few times i got past this, and got:
STALL GET_DESCRIPTOR 128 6 1006 018
reset
portchange
reset
portchange
* since i couldnt install the sdk/extra/google usb drivers (error: contains no info for your hardware), ive tried with these usb drivers:
LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe
LGUnitedMobileDriver S4981MAN37AP22 ML WHQL Ver 3.7.2.exe
* adb interface in devices shows: AndroidNet Sooner Single ADB interface
then i tried the KDZ_FW_UPD.exe option to flash : V10I_00.kdz , didnt work
found another KDZ option for lg (LgFlashPackacge) on acidhazardRom with: UpTestEX_mod2_marwin.exe, that also didnt work
both end with (loose translation from dutch) : error in MOD UpTextEx MFC Application, program terminated
ive also been reading: http://forum.xda-developers.com/showthread.php?t=1186406&page=5
* the battery loading animation hasnt been showing since the cwr boot-loop started
thinking about trying a new xp install (Again), but im hoping there is some fault in my previous work, or something else i didnt try !?
im about to give up on this and send the phone to LG, but that would feel like a defeat
LG e400 Boot Loop after LG Update
ive tried the options again...and wrote down some more info, i also reinstalled a clean XP : SP3 (incl all updates, except powershell)
installed: LG Mobile support tool incl designated lg drivers
it all looks fine, connects and will detect the phone model, but when "checking software version"
(still in the analysis screen) it stops with "Software update is not supported for this model"
*im guessing thats because of the cwm recovery ?
ADB Fastboot
installed: java - jre-7u5-windows-i586-iftw.exe
adb devices will only show my lg when in recovery menu
adb reboot-bootloader
the screen starts with: USB Init , then a lot of data pases like userdata, persist, cache and tombstones
(they all share status 0x0 <- if that means anything to anyone ?)
fastboot erase recovery and fastboot flash recovery recovery.img both end with [waiting for device]
fastboot devices, produces nothing (not even an error)
KDZ
edit: with msxml 4.0 SP3
once i plug in the usb the phone will show the LG logo, i cant mannualy put it in emergency mode
ive tried using kdz on the lg-logo and cwm recovery screen, i also tried Diag and Emergency modes,
the whole process always looks fine, there are no error lines in the logs, althoug it doesnt seem like a problem,
there is only one blank line:
Param : moduleDir =
all logs end with:
23:00:27 : Step Complete : UPDATE FINISHED!
23:00:27 : ResetStartInfo() Call
23:00:27 : _DetachDLL Call
23:00:27 : _DetachDLL Call End
23:00:27 : FreeLibrary Call
23:00:27 : FreeLibrary Call End
23:00:27 : ResetStartInfo() Call End
23:00:27 : ===FINISHED===
then i get the MOD UpTextEx program terminated error, i can still access the KDZ_FW_UPD.exe till i close the error window
edit: also tried...
- as very 1st step to restore the cwm backup
- adb + kdz under Vista
- lg mobile support tool, emergency mode under support option, gives another version error on entering imei or serial
I just wanna ask ..
Where does your phone stuck? In Clockwork recovery or in the LG's logo screen? What version of windows are you using?
nickocelot said:
Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help
Click to expand...
Click to collapse
I think you need come back to default Rom Stock of your LG Optimus .After that you can do step by step to update Rom use ClockworkMod Recovery again. If still get error ,you need review the Rom want update for your phone has appropriate or not ?
Good luck.......^^
When i start my phone it will go straight to CWM recovery menu, when i connect to usb when the phone is off it will show lg logo
ClockWorkMod Rom Tools Recovery
ive been working with pc's for over 20years, doesnt matter how you mess up ..theres an easy fix, i was approaching my little LG with the same trust of available tools
ironically, i had installed the Clockworkmod ROM Tools as a safeguard, since i kept reading that its backup was the best
my lesson learned:
since you can backup your stuff and recover with the LG tools, and use other apps for the other functions, theres no point in risking bricking your phone ....when you dont really need it
also im glad i choose to buy an LG since -apparently- i can still send my phone for repair without any costs, considering it all, thats a great service ...almost a miracle
ill keep lurking to see the Cyanogenmod progress, which ill probably install with a multiboot app instead of CWM
feel free to disagree / discuss my opinion
can you please share your back-up please?:crying:
Same problem here! I don't know why on earth I tried to do the OTA update...
exitrecovery.zip didn't help either.... damn
EDIT: Did this: http://forum.xda-developers.com/showthread.php?t=1610666&page=43 and got it working again!!!
The same problem but I didn't no how to fix it!
Hi guys:crying:,
I do have te same problem of you have to but I doesn't know how to fix it.
From google I have found this tread and that's why I've become a member.
All what you guys said, I doesn't understand how t ofix it by myself with the same way too.
Can anybody please tell me a easier way for a beginner as I am?
Thanks already!
Sorry for bad English.
Greeting to all,
i have bricked my phone here is how;
i tried to increase cpu speed to 2gh by installing ElementalX and my phone does not boot after that, so i tried to delet it but i wiped all system, now the phone will not swith on it stuck on htc logo,
i downloaded toolkit which have all commands, i downloaded many ruu version but no luck, all installation will fail
i tried push the zip through adb and even try to installed through 'install ruu factory' command but no joy, some ruu will progress to 100% on my pc but will fail to installed in the phone it says failed to install error 12
i am with meteor network in ireland, i appreciate if any one can help.
i tried about 20 hours but no luck at all, there is no system in the phone all wiped out , even i tried few ruu.exe still doe not work i be happy if i be able to get it back to work rooted or unrooted.
now through the tool i can easily unlock and relock the boot loader and i know to go to fastboot or recovery mode that is all i know.
thanks in advance.
soleved
Never mind no one seems to help, well i fixed after lots try and suffer. case closed.
Hi,
I'm facing similar problem - what steps did you took to fix it?
Hi,
I have root my phone. disabled some unnecessary apps, but i decided to factory reset, but when i open the phone top and bottom buttons were gone, no notifications. Now I cant do anything. How can i restore the whole OS back?
I have bring the stock recovery back but now i stuck!
now i cannot enter to bootlader
Trying with adb but it says not authorized. Authorize notify cant appear on screen i think its because huawei home not work properly.
And I cant even install anything from google play or local apk.
I think its bricked please help...
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Easy Computer said:
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Click to expand...
Click to collapse
Hi,
I have tried almost every steps except latest version update, because there is no latest version on Huawei Turkish website, latest one shows B133 but mine was B137, so it gives an error while starting the update from dload folder.
Hisuite doesnt recognize the phone.
Now I am downloading Huawei MT7-L09 CEE&Nordic European Channel V100R001C00B137SP03 Android 4.4.2 EMUI 3.0 This is not Turkish version but i hope I can install it with 3 button update procedure...
No luck...
It gave me "software install failed" error...
Now im scared to factory reset my phone... I hope you get to find a solution bro.
EzerchE said:
No luck...
It gave me "software install failed" error...
Click to expand...
Click to collapse
Easy Computer said:
Now im scared to factory reset my phone... I hope you get to find a solution bro.
Click to expand...
Click to collapse
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
i hope you get it to work again. good luck bro :good:
EzerchE said:
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
Click to expand...
Click to collapse
tuddu said:
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
Click to expand...
Click to collapse
Hi,
I flashed stock: boot.img, recovery.img, custom.img, system.img and cache.img inside from fastboot mode but no luck...
It gives this error immediately after reboot:
Error!
Func NO: 12 (FUNC_LOAD_IOM3)
Error NO: 1
And can't enter 3 buttons upgrade procedure
I think some system files are missing and it doesnt boot or enter to recovery mode...
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
EzerchE said:
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
Click to expand...
Click to collapse
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
alexre123 said:
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
Click to expand...
Click to collapse
Hi Alex,
I have rooted my phone, problem happened while i am wiping the boot, system and cust from CWM Recovery before the install new rom. I think its deleted something about sensors (on chinese forum they talking about iom3 error is related with sensors)
So phone didnt boot again.
I returned it to seller without any excuse. I just said I didnt satisfied with the phone. And they accept return and paid the money back in same day.
Hi, i have had for many years this phone and if something went really bad and really didn't have the hassle to open the back of the phone to restore it from test point, i would always go to erecovery and let the phone handle the entire process. But now i'm unable to connect to Erecovery services, every time i try it shows me "Getting package info failed"
I have tried the following:
Reflash the board with testpoint
dload method (which always fails with files and with hisuite proxy)
lock the bootloader
change dns as one thread on the honor 6x forum said
i formatted via original recovery
Nothing seems to work
Is anyone having the same problem i have? Does anyone knows the fix to the problem?
I'm having the same issue on my BLN-L24 (I had no issues until I tried to use a custom ROM without deleting fingerprints... oops), any help?
Hello, my Motorola e Android phone got hard bricked and it began suddenly with the first error message being constant boot looping and eventually going to an error message with an adroid on its back where it said partition was corrupt or damaged and the only choices were try again or factory reset. I kept trying again.
I tried to fix it and eventually ended up stuck on ap fastboot flash mode(secure) and it says oem locked.
I gave up trying to do it myself and want to factory reset but recovery mode won't work even if I press it, says that start up failed and goes back to fastboot mode. It's stuck.
Serial number is ZY22DLT4R and last letter is a V or W, can't tell.
I dont know to flash or custom rom. Tried a few but I only have windows 10 on my PC and it didn't install drivers properly and I need this phone fixed ASAP . I think I'm considered a newbie.
I also need to know if it's too far gone so I'm prepared to buy another crappy phone and lose all my data. I don't have days/weeks to learn tutorials about how to mod, etc.
Please help.
edit: I don't know if my bootloader is locked or unlocked.
Re-flash phone's Stock ROM by means of this tool
Download Moto Auto Flash Tool v8.2 by Jamesjerss (2022)
Download Moto Auto Flash Tool v8.2 by Jamesjerss to flash Firmware on Motorola Phones. Follow this guide to Root, Unlock Bootloader, etc.
www.ytechb.com