i just manage to broke twrp when i trying to erase /metadata it says cant format metadata.
when itry to resize or repair it says cannot not recreate /data/media
and give error
when i try to insall official rom just says to flash additional zips please reboot recovery to switch to the updated slot i have sellected A (inactive B) i just switch to b and reboot and phone just bootlooping only oneplus booting animations (circles moowing)
please help thanks
any ideas ?
dusiko said:
any ideas ?
Click to expand...
Click to collapse
Have you done factory reset?
parag0n1986 said:
Have you done factory reset or tried formatting metadata with fastboot?
Click to expand...
Click to collapse
parag0n1986 said:
Have you done factory reset?
Click to expand...
Click to collapse
i just click reset all data and it still give me an error than i try to format all separately but same
Metadata is problem the phone cant find it where i try to resize and repair it say pressent: No,
size 0mb
how do you mean with fastboot ?
Before this error i run these commands
dusiko said:
Before this error i run these commands
Click to expand...
Click to collapse
There is commands with fastboot to format metadata I don't remember the exact commands you'll have to search otherwise you might have to go back to stock and start over with MSM
dusiko said:
Before this error i run these commands
Click to expand...
Click to collapse
Have you tried fastboot -w command? That erases userdata maybe it will fix metadata or the fastboot erase command?
dusiko said:
Before this error i run these commands
Click to expand...
Click to collapse
I noticed on your commands you didn't put anything for sda maybe that's the issue like sda21 etc ..
parag0n1986 said:
I noticed on your commands you didn't put anything for sda maybe that's the issue like sda21 etc ..
Click to expand...
Click to collapse
where i should put it ?
parag0n1986 said:
Have you tried fastboot -w command? That erases userdata maybe it will fix metadata or the fastboot erase command?
Click to expand...
Click to collapse
i tryed this it seems like partition is not created but when i try to create it wont becouse superparion ... See in document
dusiko said:
i tryed this it seems like partition is not created but when i try to create it wont becouse superparion ... See in document
Click to expand...
Click to collapse
Does op7 pro have a super partition? Maybe you're installing the wrong ROM for the wrong phone. Otherwise try to MSM back to factory and start over
dusiko said:
where i should put it ?
Click to expand...
Click to collapse
Depends on what block you're trying to edit. Sda is a block. It usually have a number after it, not just sda
parag0n1986 said:
Does op7 pro have a super partition? Maybe you're installing the wrong ROM for the wrong phone. Otherwise try to MSM back to factory and start over
Click to expand...
Click to collapse
waht you mean msm ?
dusiko said:
waht you mean msm ?
Click to expand...
Click to collapse
and i tryed two different one original (stock) and one custom but same
parag0n1986 said:
Depends on what block you're trying to edit. Sda is a block. It usually have a number after it, not just sda
Click to expand...
Click to collapse
before i typed that commands phone work just fine, for mee is priority to get it running
dusiko said:
before i typed that commands phone work just fine, for mee is priority to get it running
Click to expand...
Click to collapse
[OP7PRO][LATEST OOS 11.0.5.1 GM21AA/GM21BA] Collection of unbrick tools
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Check this out. This will teach you how to use edl mode and reset your phone back to factory stock like you just got it brand new just make sure you pick the right one for the right phone if you have a OnePlus 7 pro it should be guacamole AA at the end of i remember right. Just make sure you're doing the right thing on the right phone. I have had to do this many times it's pretty simple and takes about 5 minutes or so once you are finished you have to unlock your bootloader
dusiko said:
before i typed that commands phone work just fine, for mee is priority to get it running
Click to expand...
Click to collapse
Why were you even typing those commands? I've never done that to install a ROM. What ROM are you trying to install?
i tryed install window 11 but i make mistake because tutorial was for oneplus 6 not 7 ...
Related
Hi, I was using TWRP to flash a new rom... I wiped but it took ages and appeared to have hanged. I powered down, then back up.
It loaded to Android... then froze.
Now I cant even boot to TWRP.
I can use WUGS toolkit to boot to twrp but I cant mount anything as it asks for a password to decrypt! I didnt have encryption enabled on my phone.
How can I fix this... I cant boot to Android to change USB debugging, only fastboot commands,
I think the fix is to format data. But try formatting just the cache first if you don't want to lose data.
viperman78 said:
Hi, I was using TWRP to flash a new rom... I wiped but it took ages and appeared to have hanged. I powered down, then back up.
It loaded to Android... then froze.
Now I cant even boot to TWRP.
I can use WUGS toolkit to boot to twrp but I cant mount anything as it asks for a password to decrypt! I didnt have encryption enabled on my phone.
How can I fix this... I cant boot to Android to change USB debugging, only fastboot commands,
Click to expand...
Click to collapse
First try:
fastboot flash cache cache.img
Get the cache.img from the factory image
jd1639 said:
First try:
fastboot flash cache cache.img
Get the cache.img from the factory image
Click to expand...
Click to collapse
Thanks,
I tried that but I get "error cannot open 'cache.img"
meangreenie said:
I think the fix is to format data. But try formatting just the cache first if you don't want to lose data.
Click to expand...
Click to collapse
TWRP wont let me format, it just re-asks me for my password to decrypt
viperman78 said:
Thanks,
I tried that but I get "error cannot open 'cache.img"
Click to expand...
Click to collapse
You sure you got the path to cache.img correct. Fastboot isn't finding it
jd1639 said:
You sure you got the path to cache.img correct. Fastboot isn't finding it
Click to expand...
Click to collapse
My bad... I've only used Toolkits before (very lazy). I put the cache.img in the right folder... it now says its erasing cache. But its taking ages!
viperman78 said:
My bad... I've only used Toolkits before (very lazy). I put the cache.img in the right folder... it now says its erasing cache. But its taking ages!
Click to expand...
Click to collapse
Let it do it's thing
---------- Post added at 08:27 AM ---------- Previous post was at 08:16 AM ----------
jd1639 said:
Let it do it's thing
Click to expand...
Click to collapse
If it's still going, something is wrong. Your cache partition is probably borked
jd1639 said:
Let it do it's thing
---------- Post added at 08:27 AM ---------- Previous post was at 08:16 AM ----------
If it's still going, something is wrong. Your cache partition is probably borked
Click to expand...
Click to collapse
Ok, its still going. Is there a recovery from this or have I killed my phone?
viperman78 said:
Ok, its still going. Is there a recovery from this or have I killed my phone?
Click to expand...
Click to collapse
If you can get into fastboot there's recovery. The next step is to flash the factory image. You will lose all your data. In the factory image there is a flash-all batch file. Just plug your phone into the usb and run that. It should take about 5 Minutes to run it
jd1639 said:
If you can get into fastboot there's recovery. The next step is to flash the factory image. You will lose all your data. In the factory image there is a flash-all batch file. Just plug your phone into the usb and run that. It should take about 5 Minutes to run it
Click to expand...
Click to collapse
Thanks mate, I don't care about saving data... I just want the phone to work! I'll let you know how it goes
viperman78 said:
Thanks mate, I don't care about saving data... I just want the phone to work! I'll let you know how it goes
Click to expand...
Click to collapse
When you get it running again use trwp 2.6.3.4 from what started your problem it sounds like you were using an earlier version
jd1639 said:
When you get it running again use trwp 2.6.3.4 from what started your problem it sounds like you were using an earlier version
Click to expand...
Click to collapse
Thanks, I have flashed the bootloader and radio fine... but whenever I fastboot reboot-bootloader it just goes black and I have to power/volume down to get back to recovery. I'll do the other files now
@abaaaabbbb63 any ideas for this guy? I thinking bad emmc at this point
jd1639 said:
@abaaaabbbb63 any ideas for this guy? I thinking bad emmc at this point
Click to expand...
Click to collapse
Its not good... I'm flashing system.img but its just hanging on erasing 'system'.
is there a recovery from bad emmc?
viperman78 said:
Its not good... I'm flashing system.img but its just hanging on erasing 'system'.
is there a recovery from bad emmc?
Click to expand...
Click to collapse
There is but you're not going to like it. It's RMA the device
jd1639 said:
There is but you're not going to like it. It's RMA the device
Click to expand...
Click to collapse
Crap... its unlocked does that mean they wont honor a warranty? Is there nothing left to try?
viperman78 said:
Crap... its unlocked does that mean they wont honor a warranty? Is there nothing left to try?
Click to expand...
Click to collapse
You can probably still:
fastboot oem lock
But hold off on that for awhile maybe someone else had some ideas
jd1639 said:
@abaaaabbbb63 any ideas for this guy? I thinking bad emmc at this point
Click to expand...
Click to collapse
Yup. Definitely a bad emmc. Sorry mate.
abaaaabbbb63 said:
Yup. Definitely a bad emmc. Sorry mate.
Click to expand...
Click to collapse
Well bugger it! Thanks for the help guys. So, I'll try a relock and RMA. If the relock fails is it possible I can pay LG to fix it or is it just better to buy a new Nexus? Otherwise I imagine I'll be months without a phone.
Did I break the emmc or is it just a dodgy chip? Or maybe I didn't use the latest TWRP?
I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
debadri1995 said:
I got an error while flashing official fastboot ROM on my note 7 pro "error: FAILED (remote: Error: Last flash failed: Volume Full)", after this my device system got destroyed. how can I flash fastboot rom on Redmi note 7 pro?
Click to expand...
Click to collapse
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
Before flashing i was using v10.3.7.0 (which was flashed by service center engineers using EDL mode.) And the Flashtool version was 2018.5.28.0.
Naveenthemi said:
This most likely happened due to an incompatible flash or incomplete one.
Now try the clear all option and format your phone completely before flashing MIUI again.
Also what OS were you running when this happened?
Click to expand...
Click to collapse
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
debadri1995 said:
oh, I forgot to tell you, I got the error while the system partition was flashing.. so definitely it was a incomplete flash.
Click to expand...
Click to collapse
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Naveenthemi said:
1. Now download the flashboot ROM u want
2.Now select the flash all including storage option
3. Try flashing it now
It should be successful as this will wipe out the existing OS and install a new one
Also u will lose your data so I hope u had a backup..
Click to expand...
Click to collapse
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
navi_58861170 said:
If anyone on 10.3.9 & facing bugs & want to downgrade then unlock bootloader & then download minimal adb toolkit extract it & copy the extracted fastboot rom files into minimal adb folder & then put your phone into fastboot mode & then run clear all & install.bat inside the extracted folder & wait for it to finish & you will be able to downgrade because you wont be able to downgrade with mi flash, its a tested process by me as i bricked my bootloader unlocked phone which was only going to fastboot mode, i recovered by this process.
Click to expand...
Click to collapse
this is useful.. thanks
You can also check that YouTube video how to flash voilet.
https://youtu.be/kjzZZjj41aM
debadri1995 said:
yes, i did the same as you said.. i know this fastboot flashing process but i got that error while flashing..
Click to expand...
Click to collapse
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Naveenthemi said:
Oh, do u have the TWRP by Petercxy to installed and accessible? If u do u can flash the ROM through that.
(The official TWRP for this device can't)
Click to expand...
Click to collapse
naah, don't have that..
debadri1995 said:
naah, don't have that..
Click to expand...
Click to collapse
Flash that
Naveenthemi said:
Flash that
Click to expand...
Click to collapse
don't wanna mesh with my phone..
debadri1995 said:
don't wanna mesh with my phone..
Click to expand...
Click to collapse
U already did ?*
Naveenthemi said:
U already did ?*
Click to expand...
Click to collapse
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
debadri1995 said:
? I don't wanna mess with my phone again* I flashed the stock firmware using Mi FlashPro
Click to expand...
Click to collapse
Oh ok u never mentioned that...good work tho...
Naveenthemi said:
Oh ok u never mentioned that...good work tho...
Click to expand...
Click to collapse
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
debadri1995 said:
yeah I didn't, but I was queries if its a Flashtool bug or My note 7 pro's bug..
Click to expand...
Click to collapse
It's probably something to do with your phone...
my bootloader is lockd how to flash rom file with mi flash
gsunil said:
my bootloader is lockd how to flash rom file with mi flash
Click to expand...
Click to collapse
First unlock the bootloader, you won't be able to flash till the bootloader is unlocked...
Anyone who can confirm or tried this TWRP for Redmi 10x Pro 5G?
https://www.cyanogenmods.org/downloads/redmi-10x-pro-twrp-recovery/
Yes, I confirm -- it works.
I've install Magisk with it, that's totally ok. Can't confirm yet if its backup/restore functions work or not.
And now I can confirm the backup and restore work. I successfully restored the super and data partitions. And also have flashed stock boot instead of patched.
So, for now it seems the TWRP is nice.
WARNING:NEVER USE THIS RECOVERY WHEN YOUR PHONE IS IN THE LATEST DEVELOPER VERSION SYSTEM.IT WILL CAUSE A LOT OF UNFIXABLE PROBLEMS.
pys078 said:
WARNING:NEVER USE THIS RECOVERY WHEN YOUR PHONE IS IN THE LATEST DEVELOPER VERSION SYSTEM.IT WILL CAUSE A LOT OF UNFIXABLE PROBLEMS.
Click to expand...
Click to collapse
Also,you should not upgrade your system when you have flashed this recovery
Funny thing is that i have done what i said and now my phone is in repairing by changing the motherboard(within one year i dont need to pay for it)
pys078 said:
Also,you should not upgrade your system when you have flashed this recovery
Click to expand...
Click to collapse
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
VD171 said:
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
Click to expand...
Click to collapse
i did not know that and my phone now is repairing QAQ
pys078 said:
i did not know that and my phone now is repairing QAQ
Click to expand...
Click to collapse
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
VD171 said:
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
Click to expand...
Click to collapse
Anyway i should say thank you for telling me that.
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Click to expand...
Click to collapse
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
Click to expand...
Click to collapse
I dont know what was wrong.But my phone could not get in the fastboot mode.
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
Click to expand...
Click to collapse
And the SP flash tool has not support this phone's chip yet.I feel sad about it.
pys078 said:
I dont know what was wrong.But my phone could not get in the fastboot mode.
Click to expand...
Click to collapse
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
VD171 said:
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
Click to expand...
Click to collapse
Thank you for helping me !!!!
VD171 said:
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
Click to expand...
Click to collapse
i am not an expert in this field.
Usually when i face a problem like this,i use fastboot to settle it.If that dosen't work ,i will use SP flash tool then.
Maybe i should learn more skills about it.
pys078 said:
i am not an expert in this field.
Usually when i face a problem like this,i use fastboot to settle it.If that dosen't work ,i will use SP flash tool then.
Maybe i should learn more skills about it.
Click to expand...
Click to collapse
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
VD171 said:
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
Click to expand...
Click to collapse
maybe i was too young.i only know that i can use adb when i am in the miui.i didn't know that when the phone is not in the miui i can use adb.
pys078 said:
maybe i was too young.i only know that i can use adb when i am in the miui.i didn't know that when the phone is not in the miui i can use adb.
Click to expand...
Click to collapse
Adb is default and needed for every android device.
VD171 said:
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
Click to expand...
Click to collapse
my phone now is back in xiaomi's factory to change the motherboard.sorry for being unable to try your guide article.
VD171 said:
Adb is default and needed for every android device.
Click to expand...
Click to collapse
i don't get it.when i am in miui i have to enable the adb debugging in developer options before i use adb to debug my phone
Hey. I installed a custom rom and now I want to go back to miui. I flashed with miflash without lock and now the phone shows the poco logo then turns off and on again. What do I do? Flashing a custom rom works but I don't want a custom rom. I'm scared to clean all and lock in case it gets hardbricked.
Do not block it. First of all you need to install in correct form with miflash from a PC the MIUI rom. You're bootloop can be for a bad installation install again and send photos of the process you're phone is not hard bricked but, don't block it.
allianzcred said:
Do not block it. First of all you need to install in correct form with miflash from a PC the MIUI rom. You're bootloop can be for a bad installation install again and send photos of the process you're phone is not hard bricked but, don't block it.
Click to expand...
Click to collapse
I tried to flash from miflash multiple times but it doesn't work. However, when I flash the recovery rom from twrp it boots fine.
On CMD the phone is recognized as an adb devices?
allianzcred said:
On CMD the phone is recognized as an adb devices?
Click to expand...
Click to collapse
Yes, but flashing using fastboot still doesn't work. I flashed xiaomi.eu for now since it's late.
strongbench said:
Yes, but flashing using fastboot still doesn't work. I flashed xiaomi.eu for now since it's late.
Click to expand...
Click to collapse
Send screen shots to see what is wrong.
allianzcred said:
Send screen shots to see what is wrong.
Click to expand...
Click to collapse
What screenshots do you need? The flashing succeeds but the device gets stuck in the poco logo. When I tried to format data in twrp to see what's the issue I got: failed to mount /vendor and failed to mount /odm.
strongbench said:
What screenshots do you need? The flashing succeeds but the device gets stuck in the poco logo. When I tried to format data in twrp to see what's the issue I got: failed to mount /vendor and failed to mount /odm.
Click to expand...
Click to collapse
I had the same problem 2 weeks ago. The solution was redownload the rom again and reinstall the adb drivers does you're PC has and AMD processor?
allianzcred said:
I had the same problem 2 weeks ago. The solution was redownload the rom again and reinstall the adb drivers does you're PC has and AMD processor?
Click to expand...
Click to collapse
Yes it has an amd processor
strongbench said:
Yes it has an amd processor
Click to expand...
Click to collapse
You need to install the drivers in secure mode let my try to find a tutorial
allianzcred said:
You need to install the drivers in secure mode let my try to find a tutorial
Click to expand...
Click to collapse
Found anything?
Go to configuration/ Start options/ Advanced start options and you need to select the option 7 like in this image
Then reinstall abd and all the drivers that you need.
allianzcred said:
Go to configuration/ Start options/ Advanced start options and you need to select the option 7 like in this image
Click to expand...
Click to collapse
Thank you. I'll try tomorrow since I don't have time to setup my phone again today. I'll probably stay unlocked but I want miui recovery to get ota updates.
After that you need to redownload the MIUI version extract from the .zip the folder and install the rom if that doesn't work tell me. I got an AMD Ryzen 5 3600, at the beginning I have the same problem. But installing in that way the drivers healp. Good look. Be in touch.
strongbench said:
Thank you. I'll try tomorrow since I don't have time to setup my phone again today. I'll probably stay unlocked but I want miui recovery to get ota updates.
Click to expand...
Click to collapse
Stay unlocked men
try it on intel (if you can)... i got the same issue but in a intel pc it works great
allianzcred said:
After that you need to redownload the MIUI version extract from the .zip the folder and install the rom if that doesn't work tell me. I got an AMD Ryzen 5 3600, at the beginning I have the same problem. But installing in that way the drivers healp. Good look. Be in touch.
Click to expand...
Click to collapse
I've decided to keep xiaomi.eu since it feels smoother than stock miui. However, I'll keep what you said in mind for future flashes.
Can't boot to fastboot, recovery, nothing!!! Doesn't seem like it is charging? It is detected. See pic. Any thoughts on how to fix this?
hawki said:
Can't boot to fastboot, recovery, nothing!!! Doesn't seem like it is charging? It is detected. See pic. Any thoughts on how to fix this?
Click to expand...
Click to collapse
Is my device in EDL Mode?
sd_shadow said:
Is my device in EDL Mode?
Click to expand...
Click to collapse
yes you can flash it with qfil,you are lucky!
304178208 said:
yes you can flash it with qfil,you are lucky!
Click to expand...
Click to collapse
qfil? no idea what that is. I was able to get it into fastboot, but can't get a ROM to install atm
hawki said:
qfil? no idea what that is. I was able to get it into fastboot, but can't get a ROM to install atm
Click to expand...
Click to collapse
you can open 9008 pot, you can flash with software qfil,you can search it,qualcomm flash tool.
hawki said:
qfil? no idea what that is. I was able to get it into fastboot, but can't get a ROM to install atm
Click to expand...
Click to collapse
with access to fastboot mode you might be able to reinstall default rom if you have the bootloader unlocked
you can try the "tinyflashscript" way and use that to overwrite all partitions with a stock image found here
RET stands for Retail and than the region code follows, just download the latest one for your region
after that your partitions are reset to the start
I have managed to recover from a previous softbrick this way
304178208 said:
you can open 9008 pot, you can flash with software qfil,you can search it,qualcomm flash tool.
Click to expand...
Click to collapse
Hi. I'm in this problem too. Did you manage to solve it?
torrentszaki said:
Hi. I'm in this problem too. Did you manage to solve it?
Click to expand...
Click to collapse
no ,I don't have the ability to solve it.
I solved! The solution: blank flash. It works on the new Android 12
I HAVE THE SAME problem with samsung: <