Hey all,
I have got a Note 10.1 GT-N8013 16gb WiFi that appears to be soft bricked. I rooted it, no custom rom, a couple years ago. The other day i pulled it outta my bag to find it frozen on the black Samsung Galaxy Note 10.1 screen. I tried rebooting it and it never would boot any further. I have tried the suggestions of re flashing stock firmware and have not had any luck. I even tried flashing stock firmware with a pit file. I cannot access Clock Work recovery. It crashes as soon as the writing appears on the bottom left of the screen. I do not know what to do now. Any suggestions?
Thanks
Chip
Are you able to boot into download mode ?
bikrame said:
Are you able to boot into download mode ?
Click to expand...
Click to collapse
Yes I am
Flash stock rom via odin and post where it fails in Odin .
Flashing a PIT file may have been the wrong choice .
JJEgan said:
Flash stock rom via odin and post where it fails in Odin .
Flashing a PIT file may have been the wrong choice .
Click to expand...
Click to collapse
It doesnt fail in odin, thats the thing. Its successful but still wont boot past samsung screen. I only tried the pit file after the 100th try
Hi there!
I wanted to install a new recovery form this guide: https://forum.xda-developers.com/showthread.php?t=2663834
The phone has a stock ROM and stock recovery. I can easily go to download mode, boot it even after Odin fails to flash.
The thing is when I flash the recovery, Odin gets stuck at "Getting PIT file for mapping" or something like that and aborts flashing. No bars at phone screen while flashing (it's in the downloading mode), just nothing.
I tried flashing on different computer, different usb port/cable, different recovery and the result is still the same. Sometimes I recieve "Cannot open the COM port." error.
What can I do?
Would you flash custom recovery and root your phone?
First of all upgrade Odin version.
Which extension have cwm recovery file?
Uncheck "Re-Partition" box before the flashing.
Yea, i would to flash some ROM and root my phone
Odin 3.12.3
Tried also with older verisons
File ext: .tar.md5
everything is unchecked during the process
Do you use original samsung cable?
Restart the pc and the device. Try again to flash. If fails just put stock pit file in PIT section, tick Re-Partitions and flash it with recovery in PDA section.
Most of this issue fixes are "I solved it by plugging the cord into another port and letting windows rediscover the phone".
I used original samsung cable, didnt work.
Also adb doesnt see the device when its in downloading mode but I think thats normal.
Where can I get the stock PIT file and is it more risky when i use it?
I'll try with another port and will let know
Ive found some thread here with .pit file:
https://forum.xda-developers.com/showthread.php?t=2428753
is it the pit file that i should use?
foralost said:
I used original samsung cable, didnt work.
Also adb doesnt see the device when its in downloading mode but I think thats normal.
Where can I get the stock PIT file and is it more risky when i use it?
I'll try with another port and will let know
Ive found some thread here with .pit file:
https://forum.xda-developers.com/showthread.php?t=2428753
is it the pit file that i should use?
Click to expand...
Click to collapse
Yes, it is. Choose the right version: i9105P (NFC) - i9105 (no-NFC)
Just before flashing I have a question.
Does the flashing now with .pit file will re-create every partition on the phone causing ALL data to be erased? It would be a problem if after repartitioning odin would be still unable to flash the recovery, wouldn't it?
foralost said:
Just before flashing I have a question.
Does the flashing now with .pit file will re-create every partition on the phone causing ALL data to be erased? It would be a problem if after repartitioning odin would be still unable to flash the recovery, wouldn't it?
Click to expand...
Click to collapse
Pit erases all your partition and removes all datas. Recovery hasn't problem with stock pit file.
Went like a charm without using PIT file (unchecked Re-Partition). It went by using different USB Port and I don't know, maybe the fact that I put the pit file also with the recovery image in the same folder.
Damn, this Odin-issue can be very annoying, I tried like over ten times and nothing and now it just went all straight forward for the first time. Thanks for replying!
foralost said:
Went like a charm without using PIT file (unchecked Re-Partition). It went by using different USB Port and I don't know, maybe the fact that I put the pit file also with the recovery image in the same folder.
Damn, this Odin-issue can be very annoying, I tried like over ten times and nothing and now it just went all straight forward for the first time. Thanks for replying!
Click to expand...
Click to collapse
Good news. You're welcome!
My phone is not working at all, it just sits in a bootloop. Samsung switch doesn't have my model, nor does their website. I've tried to flash the stock rom on my phone and it doesn't work. The only way it flashes is if I delete cm.bin and sboot.bin other wise it will just fail in odin. My phone is not supported that much I guess but even when I try to flash custom roms on my phone it is successful in twrp recovery but stays in a boot loop after restart. I don't know if I need to buy a new phone because for the last week I've been trying to fix a 200$ brick. Please help is there any other way to flash stock firmware other than odin. I've tried diffrent cables, ports, the whole works. What do I do?
Ethan Mobile Tech Nerd said:
My phone is not working at all, it just sits in a bootloop. Samsung switch doesn't have my model, nor does their website. I've tried to flash the stock rom on my phone and it doesn't work. The only way it flashes is if I delete cm.bin and sboot.bin other wise it will just fail in odin. My phone is not supported that much I guess but even when I try to flash custom roms on my phone it is successful in twrp recovery but stays in a boot loop after restart. I don't know if I need to buy a new phone because for the last week I've been trying to fix a 200$ brick. Please help is there any other way to flash stock firmware other than odin. I've tried diffrent cables, ports, the whole works. What do I do?
Click to expand...
Click to collapse
you can try bro using samfirm to find your latest firmware
you can find latest one from here
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
1-after flash latest firmware
2-flash your model TWRP by odin but without tick auto-restart after that
3-restart your device manual by press VOL-DOWN + HOME + POWER Button then after screen turn to black CHANGE JUST TO VOL-UP to enter TWRP RECVERY
4-flash Latest SUPER-SU BY TWRP
rifek4 said:
https://forum.xda-developers.com/ga...ow-to-root-install-twrp-t3673742/post73811927
Click to expand...
Click to collapse
ty very much but my model is not supported
Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.
What model does your phone say in download mode, and what firmware did you flash?
Beanvee7 said:
What model does your phone say in download mode, and what firmware did you flash?
Click to expand...
Click to collapse
Sorry,
it is a G930F
I downloaded the File from SamFirm (G930FXXU2ERE8_CL13438344_QB18102270_REV00) and used Odin3 v3.13.1.
any solutions?
I have exactly the same Problem.
Did you find a possibility to fix that ?
I´m going crazy with that my device is unrootet and on stock Rom when it came into bootloop , i tried to fix it with Odin a couple of times used the latest Firmware from Samfirm but it doesnt work and gets stuck on erasing Screen and keeps on restarting . I can always get into download mode but i cant open the recovery . Another thingis that my System Status in the download mode says custom ?? i never flashed a custom Rom on it Does anyone know if i can bring it back to Samsung like that because i still have a guarantee
i would be so thankful for your help guys
cheers
Had a similar issue before with an S6, and one of the workarounds that works for a lot of samsung issues is to flash the phone through ODIN with a repair firmware and a pit file. If im remembering right the firmware files are AP, CP, BL and CSC, also the pit file. you gotta check repartition in odin too.
any idea how to fix this ? In the same boat, can't figure out how to solve this.
same thing happened to me, i can't get it to work
spittfire said:
Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.
Click to expand...
Click to collapse
hi have you solved then? I've got the same problem
can´t believe there is no solutions for this
i have the same problem with a galaxy A20 SM-A205G
i flahshed diferrent ROMs from diferent countries, with PIT FILE and without it and nothing works
maybe the difference with other posters here is that i can access to recovery mode but i dont find anything about fix this phone from recovery mode or something like that.
Helo! I'm new here at FORUM. In a desperate attempt I decided to create an account here and try to solve my problem with a Samsung device.
It all started when I received a Samsung Galaxy Core 2 device to fix. It is stuck on the Samsung screen and does not start the system. I first tried to install the original ROM of the device with the correct binary through the Sammobile website using the Odin3 program. I tested about 4 different ROMS, but none of them worked.
After unsuccessfully trying to install the ROM I decided to restore the device using Hard Reset mode by pressing the correct key combination. And this is where I came across a very worrying problem. The correct options would be to show the Recovery options on the device's screen, but on this device they do not appear. The only thing that appears is the Android symbol with a red exclamation symbol. This screen appears for 3 seconds only ... after that the system restarts and returns to the Samsung screen again.
I've been trying to find a solution to this problem for a week and so far I haven't found anything.
I installed several features through Download Mode, but none of them were recognized by the system (All features were compatible with the model). Some of these features were Custom Recovery ... TWRP ... CWM .. Custom ROMS ... etc. I installed all of them through Odin3, but after the process was over and the phone restarted it didn't install because it jumped straight to the Samsung screen again.
Since no option on the Hard Reset screen was showing up, I decided to press a few keys at random to try to access an option. After a few attempts I finally managed to see some information. Now I come across written information: '' E: failed to mount / efs (invalid argument) '' https://ibb.co/FmBtv10 (Error Image).
And this is where it gets worse, because I don't know what that means. The only things I have left on the device is that message and nothing more. There are no more options to access.
I hope this device has a solution. I would be very grateful if someone could help me with this. Thanks for reading.
UserCroft said:
Helo! I'm new here at FORUM. In a desperate attempt I decided to create an account here and try to solve my problem with a Samsung device.
It all started when I received a Samsung Galaxy Core 2 device to fix. It is stuck on the Samsung screen and does not start the system. I first tried to install the original ROM of the device with the correct binary through the Sammobile website using the Odin3 program. I tested about 4 different ROMS, but none of them worked.
After unsuccessfully trying to install the ROM I decided to restore the device using Hard Reset mode by pressing the correct key combination. And this is where I came across a very worrying problem. The correct options would be to show the Recovery options on the device's screen, but on this device they do not appear. The only thing that appears is the Android symbol with a red exclamation symbol. This screen appears for 3 seconds only ... after that the system restarts and returns to the Samsung screen again.
I've been trying to find a solution to this problem for a week and so far I haven't found anything.
I installed several features through Download Mode, but none of them were recognized by the system (All features were compatible with the model). Some of these features were Custom Recovery ... TWRP ... CWM .. Custom ROMS ... etc. I installed all of them through Odin3, but after the process was over and the phone restarted it didn't install because it jumped straight to the Samsung screen again.
Since no option on the Hard Reset screen was showing up, I decided to press a few keys at random to try to access an option. After a few attempts I finally managed to see some information. Now I come across written information: '' E: failed to mount / efs (invalid argument) '' https://ibb.co/FmBtv10 (Error Image).
And this is where it gets worse, because I don't know what that means. The only things I have left on the device is that message and nothing more. There are no more options to access.
I hope this device has a solution. I would be very grateful if someone could help me with this. Thanks for reading.
Click to expand...
Click to collapse
When flashing your firmware using odin, try ticking nand erase. Nand erase erases boot
kernel
recovery
system
data
cache
.android_secure
datadata
wimax
efs
preload.
This should solve your mounting problem
Tab E said:
When flashing your firmware using odin, try ticking nand erase. Nand erase erases boot
kernel
recovery
system
data
cache
.android_secure
datadata
wimax
efs
preload.
This should solve your mounting problem
Click to expand...
Click to collapse
Thank you for your attention in answering my question.
I checked the box that says '' Nand Erase All ''. After the Firmware was installed the phone restarted to the Samsung screen again .... so I think it didn't work. Correct would be to restart with the Android logo, correct?
I tried to mark the other options as well ... such as '' Phone Bootloader Update '' ... '' Phone EFS Clear '', but none of them worked. The biggest problem is the reboot, because the files are not being loaded by the system to be installed .... when Odin restarts the cell phone it goes straight to the Samsung screen and from there it keeps loading forever.
Am I using the wrong USB cable or is a PC feature missing? I use a Samsung cable and the Drivers are installed on Windows. Samsung driver version is 1.5.61.0.
I'll be waiting for another suggestion.
Tab E said:
When flashing your firmware using odin, try ticking nand erase
Click to expand...
Click to collapse
UserCroft said:
Helo! I'm new here at FORUM. In a desperate attempt I decided to create an account here and try to solve my problem with a Samsung device.
It all started when I received a Samsung Galaxy Core 2 device to fix. It is stuck on the Samsung screen and does not start the system. I first tried to install the original ROM of the device with the correct binary through the Sammobile website using the Odin3 program. I tested about 4 different ROMS, but none of them worked.
After unsuccessfully trying to install the ROM I decided to restore the device using Hard Reset mode by pressing the correct key combination. And this is where I came across a very worrying problem. The correct options would be to show the Recovery options on the device's screen, but on this device they do not appear. The only thing that appears is the Android symbol with a red exclamation symbol. This screen appears for 3 seconds only ... after that the system restarts and returns to the Samsung screen again.
I've been trying to find a solution to this problem for a week and so far I haven't found anything.
I installed several features through Download Mode, but none of them were recognized by the system (All features were compatible with the model). Some of these features were Custom Recovery ... TWRP ... CWM .. Custom ROMS ... etc. I installed all of them through Odin3, but after the process was over and the phone restarted it didn't install because it jumped straight to the Samsung screen again.
Since no option on the Hard Reset screen was showing up, I decided to press a few keys at random to try to access an option. After a few attempts I finally managed to see some information. Now I come across written information: '' E: failed to mount / efs (invalid argument) '' https://ibb.co/FmBtv10 (Error Image).
And this is where it gets worse, because I don't know what that means. The only things I have left on the device is that message and nothing more. There are no more options to access.
I hope this device has a solution. I would be very grateful if someone could help me with this. Thanks for reading.
Click to expand...
Click to collapse
When flashing TWRP through odin, untick auto reboot, hold power Volume down and home button. You will see a black screen. Then immediately press power volume up home button. Then flash a custom rom. You ticked the bootloader update option, but Samsung core 2 doesn't have bootloader. Hope the nand erase fixed the mounting
Tab E said:
When flashing TWRP through odin, untick auto reboot, hold power Volume down and home button. You will see a black screen. Then immediately press power volume up home button. Then flash a custom rom. You ticked the bootloader update option, but Samsung core 2 doesn't have bootloader. Hope the nand erase fixed the mounting
Click to expand...
Click to collapse
Before I do this procedure I need to ask a few questions. Do I need any requirements to install TWRP? This phone has no ROOT and no other modifications.
Does the ROM that I am going to install need to be compatible with TWRP? I am trying to install an official Samsung ROM without modification.
I will try to use the version for the SM-G355H. The TWRP for this model is hard to find.
Just remembering that my recovery screen is dead, so I don't have access to anything in the device's Recovery options. I look forward to new answers so I can continue.
1. You need no requirements to flash twrp
2. Every rom for your device is compatible.
Just a few questions,
After nand erase and firmware flash, do you still have a corrupted recovery?
Does the firmware that you are flashing, and the model number in Odin mode match?
Tab E said:
When flashing TWRP through odin, untick auto reboot, hold power Volume down and home button. You will see a black screen. Then immediately press power volume up home button. Then flash a custom rom. You ticked the bootloader update option, but Samsung core 2 doesn't have bootloader. Hope the nand erase fixed the mounting
Click to expand...
Click to collapse
I followed those instructions you sent me. I used a TWRP file for the model SM-G355H (I hope it is compatible with this model). The file is called '' recovery.tar.md5 ''. I opened Odin Version 3.0.9 and deactivated the '' Auto Reboot '' option. I passed the TWRP file to the cell phone and did the commands you sent me. The phone restarts with a brief Android screen for 3 seconds and disappears. There are no commands to do. It goes to the Samsung screen again. So I think it didn't work for me.
I hit the keys the same way you told me to (I hope Lol)
You told me to install the custom rom. Is this done after installing TWRP and the phone restarts?
Tab E said:
1. You need no requirements to flash twrp
2. Every rom for your device is compatible.
Just a few questions,
After nand erase and firmware flash, do you still have a corrupted recovery?
Does the firmware that you are flashing, and the model number in Odin mode match?
Click to expand...
Click to collapse
Answering your first question: If you are referring to the error '' E: failed to mount / efs (invalid argument) '' yes. It appears after I press the volume button up or down as soon as the android screen appears (The recovery screen that appears only the symbol of the android lying with a red sign). I wish I could access this screen for a longer time, but it disappears quickly.
Answering your second question: I am using an official 4-part ROM. It corresponds to my country. SM-G355M G355MUBU0AQB1 ZTO G355MZTO0AQB1 OPEN BR ANDROID 4.4.2 FULL FLASH. The version of my Odin is 3.0.9. I heard that this version is the best for installing Android 4.4.2 KitKat systems, so I decided to use it.
Just one more question. Does the Cell Phone have to be 100% charged for this to work? I think I was at 60% when I tried the procedure.
Sorry for asking so many questions. I have little knowledge of the subject. If you can send me a tutorial on the internet in video or written so I can save your time feel free to send me. Thanks!
Sorry, I was busy for some days,
No, you don't need to fully charge your phone
Just found this on youtube, you can check it out
Your phone is g355hm, so I don't know if this recovery will work. If it works, then you can easily solve the problem with your mount points. I'll help you with that after you get twrp
TWRP Recovery 2.8.4.0 & 2.8.5.0 for Samsung Galaxy Core 2 SM-G355H/G355HN
Visit galaxynroms.blogspot.com. Disclaimer: I/XDA/is not responsible for any kind of damage to your device, or in case it explodes, etc. Please use it at your own risk! Whatever you do with your phone it's your own choice! Requirement: 1...
forum.xda-developers.com
Use the Odin tutorial
Tab E said:
Sorry, I was busy for some days,
No, you don't need to fully charge your phone
Just found this on youtube, you can check it out
Your phone is g355hm, so I don't know if this recovery will work. If it works, then you can easily solve the problem with your mount points. I'll help you with that after you get twrp
TWRP Recovery 2.8.4.0 & 2.8.5.0 for Samsung Galaxy Core 2 SM-G355H/G355HN
Visit galaxynroms.blogspot.com. Disclaimer: I/XDA/is not responsible for any kind of damage to your device, or in case it explodes, etc. Please use it at your own risk! Whatever you do with your phone it's your own choice! Requirement: 1...
forum.xda-developers.com
Use the Odin tutorial
Click to expand...
Click to collapse
Thank you for taking the time out of your day to help me. I figured you were busy these days, so I left a message for you to see and remember POST.
I had seen this video on Youtube before, but I saw it again and followed all the steps. I used the two versions of the TWRP for the model SM-G355HN and G355H through the link you sent me, but neither of them is being recognized by the device. I tested other different CWM versions like:
philz_touch_5.15.0-n7100.tar
philz_touch_6.09.6-n8020.tar
philz_touch_6.57.9-ghost
All of them were not recognized and loaded in recovery mode.
I was confused by a specific part of the video. After the STOCK ROM was sent by Odin, the phone restarts. (At that moment there was a cut in the video). I couldn't see what he did, but I decided it was just to turn the device off and on again in download mode to pass the CWM/TWRP.
Is it possible that the system is blocking the files that I am sending? Maybe an FRP lock? I don't know much about the android system, but I suspect that the device's BIOS does not accept any features via download mode. FRP Lock is for Android from 5.0, correct? My Android is 4.4.2 KitKat.
I have already used the main versions of Odin, including the modified versions. I used about 5 different STOCK ROMS and about 10 different versions of TWRP and CWM. Nothing works! I'm getting upset. : (
I'm running out of options. If you have any more suggestions feel free to answer me. Don't be in a hurry ... answer when you can.
Thanks!
One this is certain, FRP can't make any difference. In the video, after the flashing is complete, he immediately turned the phone back in download mode and flashed the custom recovery. As no reocvey works, extract your recovery.img from your firmware and use this one click TWRP porting tool. You will have mount pint issues, but just follow the above video if you are able to successfully able to boot the twrp you ported with this tool https://firmwarecare.com/spreadtrum-auto-twrp-recovery-porter-v1-2
Tab E said:
One this is certain, FRP can't make any difference. In the video, after the flashing is complete, he immediately turned the phone back in download mode and flashed the custom recovery. As no reocvey works, extract your recovery.img from your firmware and use this one click TWRP porting tool. You will have mount pint issues, but just follow the above video if you are able to successfully able to boot the twrp you ported with this tool https://firmwarecare.com/spreadtrum-auto-twrp-recovery-porter-v1-2
Click to expand...
Click to collapse
Thank you for sending the tool. This version does not support Android 4 KitKat. I downloaded version 1.0 (Version 1.0 supports Android 4). I used 3 Recovery.img files from 3 different STOCK ROMS and came across this error on Odin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The versions used were 3.06 - 3.09 - 3.10.6 - 3.11.1 - 3.14.1 3B Patched. I converted Recovery to .tar and .md5, but none of them work. I even tried to use Recovery Original to ensure that the problem was not the conversion, but the original file did not give errors by Odin, so I ruled out the possibility of being the conversion.
I would like to mention something from the video above: His screen in Download mode describes the ROM as Custom. After he passes the FIRMWARE through Odin the information changes to Samsung Official. My information is not Custom ... it is Samsung Official, so I wouldn't know if the transfer was successful or not.
Would it work if I switched to Custom and then went back to Official again? (I'm just speculating. I don't know if that is valid or not.)
Could you answer some questions? There are doubts about the device and the recovery mode.
1 - Why doesn't my recovery screen give me options to access it ? (Just the error message)
2 - Why when I pass any FIRMWARE through Odin and the phone restarts, no process is done for the ROM to be installed normally?
3 - The recovery screen appears for 5 seconds only ... after that the phone restarts again. This is normal ?
4 - Is there any possibility that the system is blocking by default any modification made by Odin by installing FIRMARES or customized recoveries? (This would explain why the phone does not install anything.)
5 - Is it possible to correct the error '' E: failed to mount / efs (invalid argument) '' by passing the original Efs..tar.md5 file?
6 - What is the best version of Odin to install Android 4.4.2 KitKat systems?
Grateful!
Tab E said:
One this is certain, FRP can't make any difference. In the video, after the flashing is complete, he immediately turned the phone back in download mode and flashed the custom recovery
Click to expand...
Click to collapse
UserCroft said:
Thank you for sending the tool. This version does not support Android 4 KitKat. I downloaded version 1.0 (Version 1.0 supports Android 4). I used 3 Recovery.img files from 3 different STOCK ROMS and came across this error on Odin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The versions used were 3.06 - 3.09 - 3.10.6 - 3.11.1 - 3.14.1 3B Patched. I converted Recovery to .tar and .md5, but none of them work. I even tried to use Recovery Original to ensure that the problem was not the conversion, but the original file did not give errors by Odin, so I ruled out the possibility of being the conversion.
I would like to mention something from the video above: His screen in Download mode describes the ROM as Custom. After he passes the FIRMWARE through Odin the information changes to Samsung Official. My information is not Custom ... it is Samsung Official, so I wouldn't know if the transfer was successful or not.
Would it work if I switched to Custom and then went back to Official again? (I'm just speculating. I don't know if that is valid or not.)
Could you answer some questions? There are doubts about the device and the recovery mode.
1 - Why doesn't my recovery screen give me options to access it ? (Just the error message)
2 - Why when I pass any FIRMWARE through Odin and the phone restarts, no process is done for the ROM to be installed normally?
3 - The recovery screen appears for 5 seconds only ... after that the phone restarts again. This is normal ?
4 - Is there any possibility that the system is blocking by default any modification made by Odin by installing FIRMARES or customized recoveries? (This would explain why the phone does not install anything.)
5 - Is it possible to correct the error '' E: failed to mount / efs (invalid argument) '' by passing the original Efs..tar.md5 file?
6 - What is the best version of Odin to install Android 4.4.2 KitKat systems?
Grateful!
Click to expand...
Click to collapse
Try switching to custom and then official.
1) actually, if there is something wrong with just the /efs partition, it shouldn't affect the recovery
2) looks like many partitions are corrupted
4) core 2 has no bootloader or any such protection to stop flashing
5) the efs file is included in the firmware, so it is flashed with the firmware.
Conclusion - looks like multiple partions are corrupted. Try to verify this by flashing any custom recovery or rom and check the status in Odin. Even after flashing a custom recovery, the status is stock, then there are definitely many corrupted partitions. If it's so, fixing it will be very tough
Tab E said:
Try switching to custom and then official.
1) actually, if there is something wrong with just the /efs partition, it shouldn't affect the recovery
2) looks like many partitions are corrupted
4) core 2 has no bootloader or any such protection to stop flashing
5) the efs file is included in the firmware, so it is flashed with the firmware.
Conclusion - looks like multiple partions are corrupted. Try to verify this by flashing any custom recovery or rom and check the status in Odin. Even after flashing a custom recovery, the status is stock, then there are definitely many corrupted partitions. If it's so, fixing it will be very tough
Click to expand...
Click to collapse
I will do as much as I can. Tomorrow I will contact you to say if something worked. If nothing goes well I will need to take the device for specialized maintenance. Thanks for the help, buddy. If I ever manage to solve this problem I will make a guide in FORUM showing how to fix it and give you the credits.
Tab E said:
Try switching to custom and then official.
1) actually, if there is something wrong with just the /efs partition, it shouldn't affect the recovery
2) looks like many partitions are corrupted
4) core 2 has no bootloader or any such protection to stop flashing
5) the efs file is included in the firmware, so it is flashed with the firmware.
Conclusion - looks like multiple partions are corrupted. Try to verify this by flashing any custom recovery or rom and check the status in Odin. Even after flashing a custom recovery, the status is stock, then there are definitely many corrupted partitions. If it's so, fixing it will be very tough
Click to expand...
Click to collapse
Unfortunately nothing went right, friend. I tested everything I could. I have no other options left. All the procedures were done, I followed all your suggestions, but nothing works. There is no doubt that all partitions are corrupted. You told me it would be very difficult to fix it, so I'm not even going to try. I did as much as I could with this device. I am not qualified for this, I am just a lay person who is trying to solve a complex problem.
If you think I can do this from home with some tool, tell me. If it’s too complex I’ll take it to a maintenance specialist.
Just one more question: I don't know which ROM has been installed on this device previously and which Binary of FIRMWARE. Will the Device only accept a FIRMWARE that has exactly the '' Same '' binary? For example ... I have a ROM with the PDA binary G355MUBS0AQC2 .... Will the System only accept exactly this value so that it can be installed?
I forgot to ask this at the beginning.
Sorry, I have no knowledge of using tools or fixing a device by repairing the hardware. Using the wrong binary doesn't make a difference on these older devices.
Tab E said:
Sorry, I have no knowledge of using tools or fixing a device by repairing the hardware. Using the wrong binary doesn't make a difference on these older devices.
Click to expand...
Click to collapse
I'm greatfull for your help.
Bye, buddy.