After Odin and Stock Rom stuck on Blue Screen with Erasing. - Samsung Galaxy S7 Questions and Answers

Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.

What model does your phone say in download mode, and what firmware did you flash?

Beanvee7 said:
What model does your phone say in download mode, and what firmware did you flash?
Click to expand...
Click to collapse
Sorry,
it is a G930F
I downloaded the File from SamFirm (G930FXXU2ERE8_CL13438344_QB18102270_REV00) and used Odin3 v3.13.1.

any solutions?
I have exactly the same Problem.
Did you find a possibility to fix that ?
I´m going crazy with that my device is unrootet and on stock Rom when it came into bootloop , i tried to fix it with Odin a couple of times used the latest Firmware from Samfirm but it doesnt work and gets stuck on erasing Screen and keeps on restarting . I can always get into download mode but i cant open the recovery . Another thingis that my System Status in the download mode says custom ?? i never flashed a custom Rom on it Does anyone know if i can bring it back to Samsung like that because i still have a guarantee
i would be so thankful for your help guys
cheers

Had a similar issue before with an S6, and one of the workarounds that works for a lot of samsung issues is to flash the phone through ODIN with a repair firmware and a pit file. If im remembering right the firmware files are AP, CP, BL and CSC, also the pit file. you gotta check repartition in odin too.

any idea how to fix this ? In the same boat, can't figure out how to solve this.

same thing happened to me, i can't get it to work

spittfire said:
Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.
Click to expand...
Click to collapse
hi have you solved then? I've got the same problem

can´t believe there is no solutions for this
i have the same problem with a galaxy A20 SM-A205G
i flahshed diferrent ROMs from diferent countries, with PIT FILE and without it and nothing works
maybe the difference with other posters here is that i can access to recovery mode but i dont find anything about fix this phone from recovery mode or something like that.

Related

N8010 Stuck on download mode

I flashed leeked 4.4.2 without bootloader. I then realized that I need to flash bootloader in order to get Wifi working. I flashed it, it showed "reset", then I unplugged it, and now I'm stuck on downloading. If I reboot I just get back to it. When I try to flash bootloader again, it shows me either FAIL or it gets stuck at sboot.bin. What can I do to solve this?
GodSlayer said:
I flashed leeked 4.4.2 without bootloader. I then realized that I need to flash bootloader in order to get Wifi working. I flashed it, it showed "reset", then I unplugged it, and now I'm stuck on downloading. If I reboot I just get back to it. When I try to flash bootloader again, it shows me either FAIL or it gets stuck at sboot.bin. What can I do to solve this?
Click to expand...
Click to collapse
Which files exactly did you flash from the kitkat leak? That sounds like a bad boot.img
I have same problem on n8000. I flashed via odin N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar. In odin was PASS. but Tab stuck on "downloading... do not turn off your target!" nothing happens when i try to reboot tab it back to same screen. If i reset it with vol - and launch to computer to flash again odin Fail.
Any update in this problem, i have the same also.
waiting anyone solve this problem
bump.
same issue here. help appreciated:crying:
Cautiously Trying to give some hope...
I Have a note n8013 . Our Device for some reason has a newer boot loader and will not flash the leak. So this information is from reading other threads . There is a few somewhere that explains how people solved this. I Believe the key is to FLASH THE .PIT File for the Device to which your Boot-Loader belongs to. The fail issue (from what i am thinking from glancing thru other help me and solution post.) The device partition layout is different on the leak rom then the rom you are trying to flash. But the boot partition is the same. So it flashes the boot loader but cant flash all the content due to mismatched partitions.
Hope this HELPS and if im mistaken Please explain. thou i do Not have a n8000 or no 8010.
Read other post about flashing . pit file

Help softbricked or hardbricked device?

Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
jackrabbit72380 said:
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
Click to expand...
Click to collapse
Follow the instructions from this post. Since you are soft bricked at the moment, you'll need to start at step 4. If you have an extSD in your phone, you might want to pull it until after you're up and running because the "Android" folder from Kitkat needs to be deleted and rebuilt for Lollipop.
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
jackrabbit72380 said:
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
Click to expand...
Click to collapse
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Ramer said:
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Click to expand...
Click to collapse
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
jackrabbit72380 said:
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
Click to expand...
Click to collapse
Try this: Do a battery pull, then put the phone in Download mode, hook up to PC and then open Odin and then Odin custom recovery, either twrp or Philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update Odin, there's a link to Odin 3.10.0 in my post. Let's see if we can get that far and go from there.
ramer said:
try this: Do a battery pull, then put the phone in download mode, hook up to pc and then open odin and odin custom recovery, either twrp or philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update odin, there's a link to odin 3.10.0 in my post. Let's see if we can get that far and go from there.
Click to expand...
Click to collapse
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
jackrabbit72380 said:
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
Click to expand...
Click to collapse
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Ramer said:
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Click to expand...
Click to collapse
Yes I tryed
I pulled the battery after Odin said PASS
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
when ever i try and boot the rom the phone vibrates 2 times and resets.
when ever i try to boot to recovery
i get
recovery booting....
recovery is not seandroid enforcing
set warranty bit : recovery
then phone reboots.
then it trys to boot the rom.
and vibrates 2 times and resets.
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
jackrabbit72380 said:
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
Click to expand...
Click to collapse
I saw your post count, I knew you knew what you're doing, just wanted to double check everything. Sorry, I'm out of ideas. I did ask @tdunham to take a look at this thread, if he has some other ideas, but he's offline right now. Hopefully he'll check in later.
What about flashing back to an older version of android? Full tar flash.
---------- Post added at 12:38 AM ---------- Previous post was at 12:36 AM ----------
Like ne5, and nothing else, just see if you can get stock to boot, no messing around trying to flash recovery.
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Ramer said:
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Click to expand...
Click to collapse
I tryied ni3 already
but as far as i know you cant downgrade the bootloader.
if i could flash just the bootloader for ota6 maybe that would help.
i will try downloading ne5 now but my last rom was running a nkd modem.
im going to try and flash G900P_NKD_FullRestore.tar in odin if that dont work ill try ne5
and will report back shortly.
well nkd full restore boots up to
unknowen error!
wait..
done!
udc start.
power reset or
unknown
upload mode.
this is the way i got it back from retech after they replaced my bezel and digitlizer and screen
i never had an issue with anything software wize before that.
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
tdunham said:
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
Click to expand...
Click to collapse
Yes I was using the pit file and yes I know to go to download mode from power off state. and no sim card is in the phone.
flashing ne5 stock with fingers crossed.
brb
nope
is there any bootloaders only i can flash?
well tryed everything all it does is vibrate 2 times. same as be4 im dead in the water. i don't know what's wrong or what to do.
I have tryed everything i can think of.
I can boot to download mode and flash anything i want but nothing works.
no recovery. no rom.

soft brick-cant fix

Hey all,
I have got a Note 10.1 GT-N8013 16gb WiFi that appears to be soft bricked. I rooted it, no custom rom, a couple years ago. The other day i pulled it outta my bag to find it frozen on the black Samsung Galaxy Note 10.1 screen. I tried rebooting it and it never would boot any further. I have tried the suggestions of re flashing stock firmware and have not had any luck. I even tried flashing stock firmware with a pit file. I cannot access Clock Work recovery. It crashes as soon as the writing appears on the bottom left of the screen. I do not know what to do now. Any suggestions?
Thanks
Chip
Are you able to boot into download mode ?
bikrame said:
Are you able to boot into download mode ?
Click to expand...
Click to collapse
Yes I am
Flash stock rom via odin and post where it fails in Odin .
Flashing a PIT file may have been the wrong choice .
JJEgan said:
Flash stock rom via odin and post where it fails in Odin .
Flashing a PIT file may have been the wrong choice .
Click to expand...
Click to collapse
It doesnt fail in odin, thats the thing. Its successful but still wont boot past samsung screen. I only tried the pit file after the 100th try

tried to install a 6.0.1 rom and ****ed up my phone so bad.

downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Okay, so I attempted to unroot and flash the stock 5.0.2 software and I got a error on the download screen. It says SW REV. CHECK FAIL. DEVICE: 3. BINARY: 1.
If you have no knox install MM official then flash this kernel tar file (AP) https://drive.google.com/folderview?id=0B40ItdHKfkyQcTA5bnRPWDg0X28&usp=drive_web#list it will boot to mm 5min :good:
Btw you cann downgrade from 5.1.1 to 5.0.1 you just go up not down
zach616 said:
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Click to expand...
Click to collapse
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
emcardle660 said:
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
Click to expand...
Click to collapse
will try and update. thank you. didnt work.
Okay guys so now I need a ROM to flash using ODIN. I tried to download from sammobile but the speeds are too damn slow. What I tried to flash was this file " G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 " and i got the error 3 to 1.
Download Samfirm from here, XDA itself.
Run samfirm, enter model as G920F and your region code.
It will download from Samsung servers, so high speed.
Now flash using Odin the downloaded file by putting the phone in download mode, (vol down+home+power on).
How did it happen?
Did you try to flash the VOD 6.0.1 and got stuck towards the end at hidden.IMG failing the process?
If yes, then its a two minute job. Just open the 6.0.1 tar archive and look for hidden.IMG extract it anywhere and rename it from "hidden.img" to "hidden.img.tar".
Note flash this hidden.img.tar as AP in download mode, your phone should boot.

Help my samsung s6 (sm-s906l) straight-talk

My phone is not working at all, it just sits in a bootloop. Samsung switch doesn't have my model, nor does their website. I've tried to flash the stock rom on my phone and it doesn't work. The only way it flashes is if I delete cm.bin and sboot.bin other wise it will just fail in odin. My phone is not supported that much I guess but even when I try to flash custom roms on my phone it is successful in twrp recovery but stays in a boot loop after restart. I don't know if I need to buy a new phone because for the last week I've been trying to fix a 200$ brick. Please help is there any other way to flash stock firmware other than odin. I've tried diffrent cables, ports, the whole works. What do I do?
Ethan Mobile Tech Nerd said:
My phone is not working at all, it just sits in a bootloop. Samsung switch doesn't have my model, nor does their website. I've tried to flash the stock rom on my phone and it doesn't work. The only way it flashes is if I delete cm.bin and sboot.bin other wise it will just fail in odin. My phone is not supported that much I guess but even when I try to flash custom roms on my phone it is successful in twrp recovery but stays in a boot loop after restart. I don't know if I need to buy a new phone because for the last week I've been trying to fix a 200$ brick. Please help is there any other way to flash stock firmware other than odin. I've tried diffrent cables, ports, the whole works. What do I do?
Click to expand...
Click to collapse
you can try bro using samfirm to find your latest firmware
you can find latest one from here
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
1-after flash latest firmware
2-flash your model TWRP by odin but without tick auto-restart after that
3-restart your device manual by press VOL-DOWN + HOME + POWER Button then after screen turn to black CHANGE JUST TO VOL-UP to enter TWRP RECVERY
4-flash Latest SUPER-SU BY TWRP
rifek4 said:
https://forum.xda-developers.com/ga...ow-to-root-install-twrp-t3673742/post73811927
Click to expand...
Click to collapse
ty very much but my model is not supported

Categories

Resources