Hello everyone ! I have a Redmi 9AT and I bricked my device by rooting it by Magisk zip. So I flashed MIUI through SP Flash Tool and I had the "NV Data is corrupted" message. I lost my two IMEI in the same time but I succeed in reflashing them. Then, I flashed Havoc OS and it successfully booted. Now, my IMEI are restored but I haven't any signal. So what is the problem ? Is the NVRAM responsible ? Can one of you post an nvram backup of its Redmi 9AT please
Sadly, NVRAM can't be shared.
They are for specific device only.
Apparentely there is something RSA signed inside it, like IMEI.
Thanks for your reply. So NVRAM is specific to device. But what about NVData ?
NVRAM is permanent.
NVDATA is variable and formatable.
Oh okay. But I can't understand one thing. How did I restore my IMEI without NVRAM ? I just used IMEI Download from Maui Meta. Do you know what it did ?
NVRAM is only read once you format data.
And then contents from NVRAM are copied to the new empty NVDATA.
Okay. But where is my IMEI stored ? And do you think flashing md1img from your guides can help me to recover mobile network ?
Today I flashed the md1img but It didn't change anything.
I want to know how you fix iMEI, the baseband problem can be brushed by the factory firmware, then there will be a signal, and then you can normal use the machine again!
But my Read Note 10 Pro which of course is a Chinese device code name because I'm Chinese. My equipment encountered NV data damage, and I am looking for a solution now. If you need the factory, please contact me, I have channels to get it!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google Translate may not be accurate, but flash factory firmware does have a signal!
If you know how to edit iMEI, please contact me!
Related
Hello . Thank you just for clicking here trying to help me .
Last night i tried to flash the new COS 13.0 . I wiped the system , data, cache partition ( without internal storage ) and then i flashed the zip . i booted the rom, then i tried to get root & xposed but that didn't worked and i wanted to restore the backup with my old ROM ( CM 13 Nightly ) . Surprise !! I got a ton of errors : " Unable to locate \firmware , persist, modem_st1 " and another ones . ok, just re flash the cm nightly and manually install all apps . I do that, then i see a LOOOT of lag on all thing i do . Just a simple swipe ..lag , try to call someone ..lag . text a message ...lag .
I go to the TWRP , trying to make a backup . I got those errors , i will make screenshots .
I searched the problem on google, i run ADB and write the make_ext4fs /dev/block/mmcblk0p15 command but that doesn't change everything .
I didn't lose my IMEI , I CAN MAKE & RECIEVE CALLS
Thanks if you can help me .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help please
What zip did you flash?
How did upgarade? with incremental?
Contain only changes. DOES NOT CONTAIN FULL ROM
You should not wipe system.
The most secure method is to fastboot latest cos img.
And upgrade from OTA
I flashed a zip from the OnePlus forum, the Untouched Version of the COS13. I cannot post links, sorry.
And it was not a incremental, was the full ROM. I manually wiped the system partition. Is my fault right?
I think the only solution is to backup all my data & completely return to stock via OnePlus Toolbox
Here is the short story. I followed the unofficial method of unlocking bootloader. I did that and managed to install twrp then i flashed CM14. However, it proved to be not working (Stuck at CM Logo). I also noticed that in TWRP it has an error which is E: Failed to mount /persist. So yeah, i revert back to MIUI and relock it. I managed to reflash to 7.1.8.0 global beta but the problem is there are so many bugs like No wifi detected and no sim data making it unusable to do any internet plus brightness isn't working.
So, this is the true problem came. I followed Raaj52's instruction and want to flash the latest Fastboot rom Developer (which is 6.7.29 global) but i got stuck with Unspecified error when i follow Raaj's instruction. When i do miflash and flash in EDL mode, it got stuck with Not enough storage is available to continue. Please help me, i have redmi phone just and want to use it again.
In addition, can someone please explain to me about:
1. Why E: Failed to mount /persist in TWRP happens?
2. Why Wifi cant detect any hotspot and sim card has no service at all?
3. Why do i have Unspecified error when flashing in Fastboot mode?
4. Why do i have Not storage is available to continue error in EDL mode?
Thank you and hope someone can help me.
PS: I use Miflash 20151028, Anz Folder, Unlocked Bootloader folder and Fastboot_edl folder as well as fastboot ROM downloaded. I also post similar thread in http://en.miui.com/forum.php?mod=viewthread&tid=433772&page=1&extra=#pid8058468 in hoping that someone can help me.
P.S: The Device codename is Kenzo (Xiaomi Redmi Note 3 Pro Snapdragon Version) and here is the picture needed for you guys to help me figuring this out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi everyone,
I was wondering if anyone has any experience or any ideas to resolve this issue I am having with my new Gome U7.
While using the phone, I constantly get popups saying I should add Iris for security. And when I actually scan my Iris and have it saved in the system, I get a different popup saying Iris is already inputted (no picture of this, sorry).
I am trying to find a way to disable this. I searched through the system.img and couldn't find any apks or anything remotely named "iris".
I am attaching a screenshot of the log of what happens in the system during these popups.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance!
Update: I flashed phone back to stock Chinese ROM (GomeOS 2.0) and I get the popups even there. I also tried flashing into the ROM that comes with the phone and the problem still persists.
Is there a possibility that I am not flashing/erasing all of the data on the phone and there is something that still persists? I am using SPtools and when I input the scatter file, I make sure all the files are checked. I then flash TWRP boot.img and recovery.img successfully (and root the phone), but again, same popup comes up in android.
Can you disable the iris scan option after you input it? From this vid it looks like you can.
https://www.youtube.com/watch?v=_3mHj89zO4s
Sorry to ask
But how did u get the China ROM I have been looking for it
Like two months and I couldn't find it yet
what sim did you use in the UK? i tried Virgin mobile and got no 4g connection TIA
How can you root your GOME U7 ?
pmechtler1 said:
Update: I flashed phone back to stock Chinese ROM (GomeOS 2.0) and I get the popups even there. I also tried flashing into the ROM that comes with the phone and the problem still persists.
Is there a possibility that I am not flashing/erasing all of the data on the phone and there is something that still persists? I am using SPtools and when I input the scatter file, I make sure all the files are checked. I then flash TWRP boot.img and recovery.img successfully (and root the phone), but again, same popup comes up in android.
Click to expand...
Click to collapse
How can you flash rom to your GOME U7 ? can you give me links for CUSTOM ROMS of it I want to upgrade it to latest version thankyou.
Good afternoon!
I bought a Tozed ZLT P11 and found out that it is software locked in Russia. By frequencies and band is compatible with Russian.
Maybe someone does not have unlocked firmware for this device?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
I don't really have a full firmware, I'm looking myself too but I have an update that I used to unbrick my router 2 years ago.
The archive have 2 files, the crc and the real update, that is simply an uncrypted tar lzma that you can open and modify under linux.
To use it you need some skill, because it isn't a fail proof procedure and risk to brick are high, I don't remenber a lot of that recovery, but I you are intentioned to try I can try to remember.
For sure, before start you need to solder the serial console pins and better, you should do a dump of the rom, you have the abitity to do it..
cybor said:
Hi,
I don't really have a full firmware, I'm looking myself too but I have an update that I used to unbrick my router 2 years ago.
The archive have 2 files, the crc and the real update, that is simply an uncrypted tar lzma that you can open and modify under linux.
To use it you need some skill, because it isn't a fail proof procedure and risk to brick are high, I don't remenber a lot of that recovery, but I you are intentioned to try I can try to remember.
For sure, before start you need to solder the serial console pins and better, you should do a dump of the rom, you have the abitity to do it..
Click to expand...
Click to collapse
this is not working
did n e one found the firmware for this device or even how to get admin access to it ?
cybor said:
Hi,
I don't really have a full firmware, I'm looking myself too but I have an update that I used to unbrick my router 2 years ago.
The archive have 2 files, the crc and the real update, that is simply an uncrypted tar lzma that you can open and modify under linux.
To use it you need some skill, because it isn't a fail proof procedure and risk to brick are high, I don't remenber a lot of that recovery, but I you are intentioned to try I can try to remember.
For sure, before start you need to solder the serial console pins and better, you should do a dump of the rom, you have the abitity to do it..
Click to expand...
Click to collapse
I have flashed using this one. after that speed it good. but what is the user name and PW on my device bro? the previous one is not working anymore.
Op8 i think its was T or V
But after try to unlock bootloader its bricked and now not taking any flash file
I tried many file but the only one error
Trg id error
So i try with smt even with imei loss risk
And the result was as you see in pick
But the worst thing is smt erase all luns
And now my device's is total empty
But just detect 9008
So is there anyway or anyone can fix?
I want to know is there anyway to bypass this id chk? Or direct flash or something?
No worry about payment
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There should be not be "COM32", or generally any number higher than 6. Check to see if your drivers are defect and try flashing again.
Xryphon said:
There should be not be "COM32", or generally any number higher than 6. Check to see if your drivers are defect and try flashing again.
Click to expand...
Click to collapse
Bro its not issue com Port i flash many time in higher port
Even in this case smt detect and erase all partitions then stuck
Trg id should not be default
Or 0
@Whoareyou
See this bro
Mr Hassan said:
Op8 i think its was T or V
But after try to unlock bootloader its bricked and now not taking any flash file
I tried many file but the only one error
Trg id error
So i try with smt even with imei loss risk
And the result was as you see in pick
But the worst thing is smt erase all luns
And now my device's is total empty
But just detect 9008
So is there anyway or anyone can fix?
I want to know is there anyway to bypass this id chk? Or direct flash or something?
No worry about paymentView attachment 5644461
Click to expand...
Click to collapse
I can help u with it.
Prinçe çharming ap said:
I can help u with it.
Click to expand...
Click to collapse
You can text me on my Telegram to get faster replies.