Sekiyama-Kernel for Moto G Stylus 5G
The kernel is based on sources from @Electimon which can be found here.
Features:
Main Features:
- Based on kernel sources from Motorola
- New performance based scheduler "dragrace" which prefers max clocks during screen usage.
Your battery milage will vary. With heavy usage I average about 10% for every 3 hours of background playback while still maintaining overall battery life when I forgo usage.
- Exfat support for external SD Cards
- Disabled ZRam
To improve memory latency
- Updated to 5.4.147 (stock is 5.4.61) thanks @Electimon
- This kernel is non-modular! All vendor modules are baked into the kernel. This includes sensors, audio, networking, and display.
- Use bbr as default TCP congestion algorithm (fastest algo according to this excellent research from @kdrag0n found here )
- Removed ALL debug config options and disabled printk
- Wireguard Support
- Magisk Stub integrated
Changelog:
Android 11
1.4 Sekiyama 4
1.3 Sekiyama 3
https://github.com/ArtiicPanda/akmosaka/releases/tag/pre-release-r1
1.0 Initial Release
https://github.com/ArtiicPanda/akmosaka/releases/tag/pre-release
Downloads:
Releases · ArtiicPanda/moto-osaka
Contribute to ArtiicPanda/moto-osaka development by creating an account on GitHub.
github.com
Requirements
- Unlocked Bootloader
- USB Debugging in developer options enabled
- Latest adb and fastboot
How to flash the Kernel:
Boot to TWRP and flash zip:
In fastboot boot the recovery.img
Commands:
Code:
fastboot boot recovery.img
Go to "Advanced" -> "ADB Sideload"
Commands:
Code:
adb sideload <path to zip>
Boot to fastboot/bootloader to flash boot.img:
Either select Reboot to bootloader option via buttons
or type:
Code:
adb reboot-bootloader
Now in fastboot flash boot.img
Commands:
Code:
fastboot flash boot boot.img
Reboot either via buttons
or by typing
Code:
fastboot reboot
@Electimon for sharing his 5.4.147 source, none of this would be possible without him sharing it.
@topjohnwu for magisk and his entire work!
@Freak07 for his kernel thread from which I drew inspiration.
Source Code: https://github.com/ArtiicPanda/akmosaka/
Downloads:
Releases · ArtiicPanda/moto-osaka
Contribute to ArtiicPanda/moto-osaka development by creating an account on GitHub.
github.com
Will this work on the boost mobile variant xt2131-1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so it seems that the kernel is functioning afaik. the only issue i havwe noticed as of yet is an error at boot into system. It syas the Following
***************
Android System
There's an internal problem with your device. Contact your manufacturer for details.
***************
info would be great thanks
sosthenisRR said:
so it seems that the kernel is functioning afaik. the only issue i havwe noticed as of yet is an error at boot into system. It syas the Following
***************
Android System
There's an internal problem with your device. Contact your manufacturer for details.
***************
info would be great thanks
Click to expand...
Click to collapse
Seems to be failing safetynet. I should have a solution by next release.
Hi everyone, on my device (XT2131-1, Spectrum Mobile), this kernel causes some stuttering, especially when entering the password to unlock. Is this a known issue?
Thanks in advance.
DustyAngel47 said:
Hi everyone, on my device (XT2131-1, Spectrum Mobile), this kernel causes some stuttering, especially when entering the password to unlock. Is this a known issue?
Thanks in advance.
Click to expand...
Click to collapse
Next release should fix your issues!
New update released. This brings many changes such as disabling Zram to improve system latency, new cpu scheduler "dragrace" as default (prefers higher clocks while screen is active), and fixes to SD Cards. Also, I improved support for those of you who installed the TWRP ramdisk. Enjoy!
Can confirm the update fixes the stuttering issues, at least for me. Thanks for the work!
Working well and no noticeable stutter now. Also the flag at UI start is resolved. Here is a twrp recovery log.
Works on Android 12 Pixel rom gsi...
only thing is i dont see the new scheduler dragrace you mentioned in the update.
see pic..
thanks again ,,the data speeds are better than the pure stock boot.img.
jhjhjhjhjhjh said:
Works on Android 12 Pixel rom gsi...
only thing is i dont see the new scheduler dragrace you mentioned in the update.
see pic..
thanks again ,,the data speeds are better than the pure stock boot.img.
Click to expand...
Click to collapse
Do chat features (text, mms) and calling work on this gsi? Caos and Lir need a bit more work than I can muster to give at the moment.
sosthenisRR said:
Do chat features (text, mms) and calling work on this gsi? Caos and Lir need a bit more work than I can muster to give at the moment.
Click to expand...
Click to collapse
thread link
GSI Compatibility Thread
What GSI are you guys rocking? I have Pixel Experience 12 from Phhusson. To install larger GSI images we have to either ditch the product image or system-ext image. I chose to get rid of my product image and that doesn't seem to have much of...
forum.xda-developers.com
and i have been using this as my daily driver for weeks now loving it...
[GSI][UNOFFICIAL][12] Pixel Experience
Pixel Experience for GSI What is this? Pixel Experience is an AOSP based ROM with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation) Their mission is to offer the maximum possible stability and...
forum.xda-developers.com
Which method are you guys using to install? Zip or boot.img?
ArtiicPanda said:
Which method are you guys using to install? Zip or boot.img?
Click to expand...
Click to collapse
I was supposed to only use one? D:
I am very good at reading instructions lmao
ArtiicPanda said:
Which method are you guys using to install? Zip or boot.img?
Click to expand...
Click to collapse
I updated to the new gsi 12 and re-flashed the kernel via fastboot method and now i see the new governor...kernel working well.
i installed it after i ported the boot.img_kernel .
great work
features for next release:
fsync on/off
lrng/drng switching
simple LMK (low memory killer)
if you there are features you wish to have that i haven't named, don't be afraid to ask!
ArtiicPanda said:
features for next release:
fsync on/off
lrng/drng switching
simple LMK (low memory killer)
if you there are features you wish to have that i haven't named, don't be afraid to ask!
Click to expand...
Click to collapse
My only request would be gpu boost from 650mhz to 750mhz would be awesome...
prioritize audio option to reduce audio latency
How are updates looking? @ArtiicPanda
Edit: Also to go with the GPU boost requested above, a slight CPU overclock would be amazing. This phone gets such good battery life I think it would be worth the tradeoff. Maybe make 2 versions of the kernel -- one normal, and one "performance" with gpu/cpu overclocks and let people choose
Edit2: Also noticing that the "tap to wake" feature gets a little wonky once the device hits (what I assume) is deep sleep. Takes 2 sets of taps to get the screen to come on. Somewhere around 45 seconds to a minute after turning the screen off and leaving the device alone. Any time before that, works exactly as intended. Definitely kernel related as it's the only difference between my unlocked model and the Cricket next to it.
Edit3: Also perhaps enabling the "notification led" on the front?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Downloads
Hotdogb (OP7T): Download Link | Google Drive Mirror | SHA256SUM
Follow us on Telegram for updates and faster(?) responses
Chat
Updates
How to flash using fastbootd:-
Dump the ROM zipfile through payload_dumper
Code:
fastboot flash recovery recovery.img
Connect your device to a computer and execute:
Code:
fastboot reboot fastboot
Check this by using the command
Code:
fastboot getvar is-userspace
Flash each partition (be sure to open the terminal window in the folder you extracted the payload):
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash product product.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vendor vendor.img
Reboot to system
ROM OS Version: Android 11
XDA:DevDB Information
Yet Another AOSP Project, ROM for the OnePlus 7T
Contributors
OmkarTheAndroid, idoybh, poad42
Source Code: https://github.com/yaap
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.x
ROM Firmware : OOS 11 Global Stable
Based On: AOSP
Version Information
Status: Stable
Created 2020-10-14
Last Updated 2021-05-20
Changelog:
ROM:
• Improve volume dialog code & fix the expand animation
• Simplify OpenDelta auto download network option
• Make emergency tile in powermenu look better
• Swipe down to expand statusbar in Launcher3
• Add an option to choose primary overlay (bg dark color)
• Many minor visual fixes in settings (and other minor changes)
• Merged latest CAF tags wherever relevant
• Bug fixes in recovery
• Updated some APNs
• Some other minor changes
Device:
• Update FOD zOrder
• Optimize native executables for Cortex-A76 CPU
• Re-introduce cleaned up raise to wake implementation
• Add Wake Device Action to off screen gestures
• Cleanup/update more blobs
NOTE: You must clean flash and format data/internal storage to f2fs.
Custom kernels will need to explicitly support YAAP for new userdata changes.
Steps to go enable Widevine L1 on custom ROMs :-
• Flash OOS 11 stable or any build from OB3 and above
• Flash magisk and enable magisk hide
• Reboot
• Verify if you have L1 working using app like drm info
• Local upgrade OOS 11 stable or any build from OB3 and above
• Reboot
• Verify if you have L1 working using app like drm info
• Flash custom ROM and you should have L1 there as well
Note: you only need to do this once
Noice
Can i get root like as other android 10 rom?
Does it have the stock camera app? Is it good enough to be daily used ?
ivan tele said:
Does it have the stock camera app? Is it good enough to be daily used ?
Click to expand...
Click to collapse
Its still in Beta stage. We may expect bugs.
Looks great! Can anyone confirm 90hz functionality? What about fingerprint and/or face unlock?
vibraniumdroid said:
Looks great! Can anyone confirm 90hz functionality? What about fingerprint and/or face unlock?
Click to expand...
Click to collapse
90hz is working. Somehow the oneplus settings were not there from the beginning but they showed up after a while. You can set it to 90hz there. Fingerprint works as good as any other aosp based rom. No faceunlock at all
Wow. Did it before OnePlus.....this company is ****. Congratulations guys! Thanks for the hard work!
abadasstanker69 said:
Wow. Did it before OnePlus.....this company is ****. Congratulations guys! Thanks for the hard work!
Click to expand...
Click to collapse
They really are sht, even the new 8t has screen issues too. Don't think I'm going to be upgrading to another OnePlus after I've had a few years with my 7t
HatRiGt said:
Its still in Beta stage. We may expect bugs.
Click to expand...
Click to collapse
I have been dd'ing this for weeks so its fine (?), the beta tag is just to scare off any potential people who might not be ready to deal with some random bug
Hi Guys,
Thanks for the ROM already installed, but on first restart got bootloop phone is stuck in "Phone is starting".
ro11er said:
Hi Guys,
Thanks for the ROM already installed, but on first restart got bootloop phone is stuck in "Phone is starting".
Click to expand...
Click to collapse
Were you able to resolve this...
Really nice rom, already installed and all working good ^^
__Passe_ said:
Really nice rom, already installed and all working good ^^
Click to expand...
Click to collapse
how you flashed this rom ??
i tried using recovery, but it boot-looped in recovery again and again
shaanu said:
how you flashed this rom ??
i tried using recovery, but it boot-looped in recovery again and again
Click to expand...
Click to collapse
I did it using fastboot like all other roms ^^
Bro how would you flash the next build. But tge rom is running great. Rooted installed viper evrything works flwaless and even banking apps are running for me
No reinstalled again and on first reboot again stuck
ro11er said:
No reinstalled again and on first reboot again stuck
Click to expand...
Click to collapse
I just installed it and it is working very well . First install OOS latest release then try to install it . I am using fastboot to install custom roms . It is easiest way for me .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
for first install:
be on the latest firmware possible
download the file named like this: crDroidAndroid-11.0-XXXXXXXX-instantnoodle-v7.X-gapps-install-files.zip
unpack zip to desktop (or whereever you want)
reboot to bootloader
run ROMinstaller.bat
follow instructions
reboot to system
if you want to install gapps:
reboot back to recovery
Apply update
Apply from ADB
from your computer: adb sideload (gapps package).zip , i recommend MindTheGapps, because with this package i could update without having to install Gapps again
reboot to system
to update:
download the file named like this: crDroidAndroid-11.0-XXXXXXXX-instantnoodle-v7.X.zip in the internal updater and update it
some large gapps packages will not install due to lack off space
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM download
Changelog: Changelog
Known issues:
Tell Me
crDroid OnePlus 8 Telegram group
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Contributors
firebird11
Source Code: https://github.com/crdroidandroid
Many Thanks to:
FizzyAps and thznutz87 for the install script
LuK1337 for his awesome work on op8
Version Information
Status: Testing
res
good job
A couple of things. ROM won't boot unless you wipe data. The clock isn't centered when center is chosen. Choosing "Advanced Restart" changes nothing on my phone.
Have it up and running and rooted. So far no problems whatsoever. Great job.
Edit: after rooting advanced start is working. Not sure if that had anything to do with it but before that I had to use volume keys to get into bootloader.
Eagerly excited to give this a shot. Been wanting a reason to switch things up on my phone, and this sure is one. Will report back once I flash.
EDIT: Flashed on T-Mobile OP8 once converted to global. I attempted to flash from T-Mobile official, but this bombed out and caused it to boot into crashdump. So far, everything is nearly flawless. I will say that display calibration profiles isn't working, but that is pretty minor. Using the standard color correction works fine. I am going to run it through its paces for the rest of the night and tomorrow. If things go well, looks like this will be daily driver material.
Verizon Op8 unlocked. On A10 as I'm waiting to get updated modem from Verizon. I only have build on one slot _a, not both as msm tool has latest ota from Verizon loaded. Is being on A11 base or having oos on both slots a pre-requisite? Please and thank you beforehand.
firebird11 said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
be on the latest firmware possible
unpack zip to desktop (or whereever you want)
reboot to bootloader
run ROMinstaller.bat
follow instructions
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM download
Changelog: Changelog
Known issues:
Tell Me
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Contributors
firebird11
Source Code: https://github.com/crdroidandroid
Many Thanks to:
PE for recovery
Chandra1.jp for assistance
FizzyAps for his install script
LuK1337 for his awesome work on op8
Version Information
Status: Testing
Click to expand...
Click to collapse
Might want to read the installer script, your missing a credit
I flashed and it seems pretty good. Some issues to note are, when connected, there's no sound with bluetooth devices, sometimes during heavy use the screen will become unresponsive, and when the pop up comes in apps to use the fingerprint scanner, it shows 2 different overlays. I was unable to get logs and I flashed back to stock, but hopefully this helps
succumbtothegreater said:
I flashed and it seems pretty good. Some issues to note are, when connected, there's no sound with bluetooth devices, sometimes during heavy use the screen will become unresponsive, and when the pop up comes in apps to use the fingerprint scanner, it shows 2 different overlays. I was unable to get logs and I flashed back to stock, but hopefully this helps
Click to expand...
Click to collapse
I also came back to post the bluetooth audio bug. Can also confirm that it happens with wired headsets as well, either using the adapter or using USB-C headphones.
I also have no bluetooth audio and display calibration profiles not working.
Wohooo finally!!
Guys help me. I flashed the rom so far so good but there's no fod icon change etc on the crdroid settings menu I went on lock screen options and there's only fod vibration verification but no fod icon change does anybody else have this? Can anyone help me with this one?
Just curious if any headway was made on the Bluetooth audio bug. If logs are needed, let me know and I can capture them.
stompysan said:
Just curious if any headway was made on the Bluetooth audio bug. If logs are needed, let me know and I can capture them.
Click to expand...
Click to collapse
Yeah, that's pretty much a deal-breaker. Looking at this guy's account it seems he's got a few irons in the fire when it comes to crDroid. Given this thread has like five posters seems not much interest from OP8 users. I'd guess that would leave us sucking hind tit. And it's hard to find fault. I'm sure this is really time consuming work and people have lives.
a new build is up, please don't use the internal installer but download it from our website and follow the install script
thanks everyone for the feedback, it's appreciated
Updated. Fixed the bluethooth issue. Haven't checked the other stuff yet.
A question. Updating as you do breaks root. Could a person extract the boot.img from your package, patch it with magisk, rename it boot.img, put it into the installer package, then update and retain root? Or would this cause the update process to fail?
android_dan said:
Updated. Fixed the bluethooth issue. Haven't checked the other stuff yet.
A question. Updating as you do breaks root. Could a person extract the boot.img from your package, patch it with magisk, rename it boot.img, put it into the installer package, then update and retain root? Or would this cause the update process to fail?
Click to expand...
Click to collapse
That should work
firebird11 said:
a new build is up, please don't use the internal installer but download it from our website and follow the install script
thanks everyone for the feedback, it's appreciated
Click to expand...
Click to collapse
Thanks for the update working great!
Adaptive brightness/color profile still not working. No matter what you select it reverts to "standard".
firebird11 said:
That should work
Click to expand...
Click to collapse
"Should" instead of "will" causes me no small amount of concern, LOL.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is (just barely a little) experimental. Use at your own risk.
Feel free to skip past the first 5 pages when reading over this thread.
This kernel assumes a few things about you, the user:
1. You have a ROG Phone 5
2. You have read all warnings and instructions
3. You are rooted (implying an unlocked bootloader)
4. You have an installation method
5. You have a backup boot image
6. You have disabled Always-on Panel
Releases will be labeled with the commit hash of their source. The newest firmware is recommended for this kernel, but not necessarily required. I am not responsible for any issues or damage caused by installing this kernel, so have a backup ready before proceeding.
Skywalker Releases
(Descending, By Date)
Downloads for : ASUS ROG Phone 5 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Thank you to everyone that has contributed to kernel development.
Specific credit is provided by maintaining accurate commit history.
Skywalker-I005
Skywalker-I005 has 8 repositories available. Follow their code on GitHub.
github.com
Current Kernel Improvements
CAF 5.4.166 / LA.UM.9.14.r1-18600-LAHAINA.0
CAF LA.UM.9.14.r1-18600-LAHAINA.0 CNSS
CAF LA.UM.9.14.r1-18600-LAHAINA.0 cam / vid
CAF LA.UM.9.14.r1-18500-LAHAINA.0 disp / snd
Boeffla Wakelock Blocker v1.1.0
Wireguard v1.0.20210606
Patched SafetyNet commandline
Magisk process detection patch
Disable watermark boosting
Multicolor LED / PlayStation / Nintendo HID
Tuxera ExFAT / NTFS modules
Umbrella Core [WIP] / Raccoon City
Optimization from Kirisakura / StarKissed
raccoon_city (originally written for the Shield Tablet) is a new take on "interactive" by using a combination of low latency timers and the kernel scheduler to scale more aggressively (or less, if configured that way) based on workload, in addition to capping the max inactive frequency. The purpose is to provide a balance between good battery life and performance without handicapping the device.
umbrella_core (originally written for the Note 4 and ported to hundreds of other devices) takes raccoon_city a step further with automation. In addition to the full array of user settings, this governor features a smart mode that will adjust the base values within a set range to further optimize battery and performance.
The difference between these governors and the batterysaver implementation (also available) is the lack of arbitrary caps on max values during normal use. By controlling the workload, this allows better control over when the next frequency is reached, instead of whether it is available at all.
The default configuration idles at a max of about 800 mHz, but can be configured for each cluster, much like most settings.
Restoring Stock / Rooted Boot Image
Boot / DTBO Images [Root / Stock] - 5 / Pro / Ultimate (NOT S)
These images are NOT built from source. These are the stock images from the firmware provided by Asus that are extracted with payload dumper and uploaded without modification. 18.0840.2202.231 18.0840.2201.226 18.0840.2112.211...
forum.xda-developers.com
Building / Compiling Custom Kernels
[SOURCE] ASUS_I005_1-kernel (MacOS / Linux)
WARNING: This is NOT a custom kernel! GPL requires that source is released for Android kernels. It does not, however, require that the source is tracked. https://www.asus.com/supportonly/ROG%20Phone%205%20(ZS673KS)/HelpDesk_Download/ Each...
forum.xda-developers.com
Hi! Twisterumbrella thanks for the development, how can i instalo this kernel? I dont have twrp since its not developed, but i have that system versión as well as unlocked no and root. I Will be glad to test when i have a proper way yo installing this.
Thanks!!
Can you provide me a .IMG file instead. For fastboot flash boot
Thx
Therazorsedge said:
Can you provide me a .IMG file instead. For fastboot flash boot
Thx
Click to expand...
Click to collapse
I would thoroughly recommend waiting for a final release
twistedumbrella said:
I would thoroughly recommend waiting for a final release
Click to expand...
Click to collapse
Release wen
Obsolete post. Please disregard.
twistedumbrella said:
As it stands, the V18.0830.2101.86 kernel will cause a bootloop on the newest firmware, bot older firmware is untested. This is not to say the kernel will not function on the corresponding firmware, which is why it is being released.
This kernel assumes a few things about you, the user:
1. You have a ROG Phone 5
2. You are capable of reading
3. You are rooted (implying an unlocked bootloader)
4. You have an installation method
5. You have a backup boot image
If anyone is still on V18.0830.2101.86 and knows what they are doing, the package is attached to test out. Again, you should have a backup boot image handy.
Note: A patched WW-18.0840.2103.26 boot image has been attached in case of emergency. It was made with a Tencent device, so results may vary.
Should it be determined that the build works on older firmware, we know we are waiting on source updates from Asus and I can start pressuring them to publish it.
Should the kernel also fail on older builds, then I will know I need to take another look at the build process and see where it went wrong.
StarKissed/StarKissed_I005_1
Contribute to StarKissed/StarKissed_I005_1 development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Hallo
Flashed your kernel and after restart my devices get into reboot wich I could not come out of. When I try flash my saved boot.img my device not connect to adb command like before (sound from pc confirm connection).
Checked and found a dive is missing but QUALcom USB 1.1 is drives installed. Any advice?
Thanks for kernel, but after installed the kernel I come into a boot loop. So I went into fastboot mode for flashing my saved patched boot.img.
But my Rog did not connect to my PC in fastboot mode. I can see that an Android drive missing (attached file) and installed QC drives but still no connection. Solution?
Before I installed kernel there was no problem with ADB/USB connection my Rog.
Obsolete post. Please disregard.
twistedumbrella said:
V18.0830.2101.86?
Unlocked bootloader?
Magisk installed and working?
Click to expand...
Click to collapse
Yes!
Obsolete post. Please disregard.
ltth said:
Yes!
Click to expand...
Click to collapse
twistedumbrella said:
V18.0830.2101.86?
Unlocked bootloader?
Magisk installed and working?
Click to expand...
Click to collapse
Fixed!! I had to, install this file first "android_winusb" then Android ADB drives.
Obsolete post. Please disregard.
ltth said:
Fixed!! I had to, install this file first "android_winusb" then Android ADB drives.
Click to expand...
Click to collapse
I better checked my system version and it`s V18.0840.2103.26 and tried to install the kernel via EX-kernelmanager with no success. BootLoop.
Sent in a support ticket casually reminding Asus of the GPL for the kernel. Hopefully it doesn't take too much longer to publish updated source.
ROG Phone 5 - Support
www.asus.com
Asus has just released new firmware and source for V18.0840.2104.47
The next kernel release will require updating to V18.0840.2104.47
twistedumbrella said:
ROG Phone 5 - Support
www.asus.com
Asus has just released new firmware and source for V18.0840.2104.47
The next kernel release will require updating to V18.0840.2104.47
Click to expand...
Click to collapse
I have unlocked bootloader and rooted with LSposed installed. Wont i the get this update in settings?. Do i have to manually apply this update? just a doubt whether to wait till i recieve the update notification or shall i go ahead with manual update
i am on WW_18.0840.2103.26 firmware. Thanks in advance
Obsolete post. Please disregard.
twistedumbrella said:
That was just announcing that the source has updated for the current firmware.
Click to expand...
Click to collapse
Thanks for the info.
But just now i came to know that once unlocked i wont get any software update notification. So i have to manually update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
StatiXOS for Google Pixel 4a (sunfish)
What is StatiXOS?
StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.
Spoiler: Known Issues
None.
Please report anything you run into!
Spoiler: Changelogs, Feature Screenshots
Changelogs
Screenshots
Spoiler: Download StatiXOS Here!
Primary
SourceForge Mirror
Spoiler: How To Flash
For flashing the ROM, you can either use our own recovery images found within the downloads folder and then sideload the build. Alternatively, you can use our fastboot packages: you can flash these directly from fastboot mode by using the command "fastboot update <zip_name.zip>"
Spoiler: Stay in touch with our Telegram channels!
Official Chatroom
Official Releases & Announcements Channel
Android version: 11
Linux Kernel Version: 4.14
Source code: GitHub
Code Review: Gerrit
Please use fastboot update packages instead of OTA packages.
Download: https://downloads.statixos.com/11-OFFICIAL/sunfish/fastbootimages/
General changelog: https://downloads.statixos.com/changelog/11/
Link download???
Pro man, very nice
Nice, is based on bliss ROM? Thanks!
0967894983 said:
Link download???
View attachment 5354911
Click to expand...
Click to collapse
Check in the “fastbootimages” folder, an OTA package should be up soon. Sorry for the inconvenience.
Tried via fastboot, with fastboot erase user data and without...failure of not enough space. Tried via recovery with and without erase data....same results. After every fail redid flash of factory image first too.
Appreciate your work, appears a partition space issue? Here's the screenshots of either approach, same fail.
kkjb said:
Tried via fastboot, with fastboot erase user data and without...failure of not enough space. Tried via recovery with and without erase data....same results. After every fail redid flash of factory image first too.
Appreciate your work, appears a partition space issue? Here's the screenshots of either approach, same fail.
Click to expand...
Click to collapse
Interesting, I flashed the fastboot update package here and it seems to be fine here. Also for erasing userdata, I'd recommend you use "fastboot -w". I am assuming you are flashing the package from the actual fastboot mode and then it should reboot to fastbootd and do it's thing.
Just tried... Used fastboot -w (old memory of old syntax) sorry.
And yep goes into fastbootd and flash via recovery automatically. Still same results. I had tried the flash boot, reboot fastboot, fastbootd then to lineage recovery and both erase or not ...same results (that was my first methods)
Wow thank you for the fast help!!.
Edit1... Thought maybe my adb tools was old. Was prev one so updated to current. Still same results. Darn
kkjb said:
Just tried... Used fastboot -w (old memory of old syntax) sorry.
And yep goes into fastbootd and flash via recovery automatically. Still same results. I had tried the flash boot, reboot fastboot, fastbootd then to lineage recovery and both erase or not ...same results (that was my first methods)
Wow thank you for the fast help!!.
Edit1... Thought maybe my adb tools was old. Was prev one so updated to current. Still same results. Darn
Click to expand...
Click to collapse
I failed to flash too
Used the fastboot update method and worked.
Edmontonchef said:
Used the fastboot update method and worked.
Click to expand...
Click to collapse
YAY! Good to know
Use the fastboot method installation, not recovery method, rom zip or recovery img on how partitions are incorrect, works but not many customizations also rom has some buggy issues, can you please also share on how you built the rom, made a thread in pixel 4a guides section
Edmontonchef said:
Used the fastboot update method and worked.
Click to expand...
Click to collapse
Your steps?
0967894983 said:
Your steps?
Click to expand...
Click to collapse
Boot to fastboot, fastboot -w, then fastboot update (rom zip from fastboot images) just drag and drop the zip
Edmontonchef said:
Boot to fastboot, fastboot -w, then fastboot update (rom zip from fastboot images) just drag and drop the zip
Click to expand...
Click to collapse
Not boot to recovery mod?
0967894983 said:
Not boot to recovery mod?
Click to expand...
Click to collapse
No, flash from fastboot with the fastboot update command. Similar to flashing a factory image
July update is here!
Download: https://downloads.statixos.com/11-OFFICIAL/sunfish/fastbootimages/
General changelog: https://downloads.statixos.com/changelog/11/
Device-specific changelog:
• Massive updates to the kernel; it's much more power efficient now as we use optimized frequencies and EAS costs obtained from Freqbench: a benchmark script made by Danny Lin. This improves jitter, overall system smoothness all while actually saving power when your device is not in use (or is being used lightly).
• Debloat qcacld-3.0 config and kill IPAv3 wake lock thus, significantly improving idle drain when connected Wi-Fi (especially 5GHz)
• Suppress various drivers from spamming the logcat and dmesg. Less lines printed per second by the logging services help conserve energy.
• Enable a tick haptic effect as present in stock when revealing the non-expanded QS.
• Boost the GPU when EXPENSIVE_RENDERING (Blur in this case) hints are parsed by the surfaceflinger
Please use the fastboot package and not the OTA package. Thanks for using StatiXOS!
Androbots said:
July update is here!
Download: https://downloads.statixos.com/11-OFFICIAL/sunfish/fastbootimages/
General changelog: https://downloads.statixos.com/changelog/11/
Device-specific changelog:
• Massive updates to the kernel; it's much more power efficient now as we use optimized frequencies and EAS costs obtained from Freqbench: a benchmark script made by Danny Lin. This improves jitter, overall system smoothness all while actually saving power when your device is not in use (or is being used lightly).
• Debloat qcacld-3.0 config and kill IPAv3 wake lock thus, significantly improving idle drain when connected Wi-Fi (especially 5GHz)
• Suppress various drivers from spamming the logcat and dmesg. Less lines printed per second by the logging services help conserve energy.
• Enable a tick haptic effect as present in stock when revealing the non-expanded QS.
• Boost the GPU when EXPENSIVE_RENDERING (Blur in this case) hints are parsed by the surfaceflinger
Please use the fastboot package and not the OTA package. Thanks for using StatiXOS!
Click to expand...
Click to collapse
My steps:
Reboot to bootloader
Fastboot -w
fastboot update .....
phone stuck at boot screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Improvements over PixelExperience
Performance improvements from ProtonAOSP
Reduced log spam verbosity
Android 12 style 4G/LTE icons
Add/remove QS with one click
Increased UI responsiveness
Optimized Night Light
Per app network restrictions
Annoying notifications
Three-fingers-swipe to screenshot
Double tap to sleep on lockscreen
Double tap to sleep on statusbar
Volume key music control
Extended Monet implementation to more UI elements
Simple RGB color balance transform sliders
More font size in 5% steps from 80% to 130%
First-class implementation of Repainter app
Under the hood optimizations
Requirements
Realme UI 1.0 FW
Downloads
Get the latest PixelOS Build for RMX2020 Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
Recovery https://pitchblackrecovery.com/rmx2020/
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/RMX2020/recovery/
Note: GApps are included, don't flash separately.
Notes
• Encryption is enabled by default
• SELinux is enforcing
• (?) Supports Realme UI 1.0 fw only
• (?) NEOLIT Kernel included
PixelOS Recovery is recommended if you want to stay encrypted, no custom recovery supports encryption on Android12, i.e. you won't be able to decrypt your data.Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Join our Telegram Group https://t.me/PixelOSChat
Source Code
PixelOS http://github.com/PixelOS-Pixelish
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/PixelOS-Devices/kernel_realme_RMX2020
ROM OS Version: Android 12.1.
ROM Kernel: Linux 4.14.x
Stable Release Date: 04 April 2022
Latest Release Date: 04 April 2022
I have a custom rom installed on my realme C3 device, Can I directly install pixelos on it ,or should i revert back to rmui ?
Everything fine..
How much storage will the system memory take?
How's the battery life in comparison to stock? I keep going back from cfw to stock since the battery life is so much better. Thanks
I actually installed this, and my phone does not reboot after I set it up after first boot, so I messed up for my first custom ROM on my phone. Used another android 12 custom rom (arrow OS) just to boot up my phone. So for me to got back into pixel os without any error in reflashing it, by flashing arrow OS first, clear caches, and then flash pixel os. And the error doesn't appear as the flashing goes on. And so far, no issues whatsoever. The rom itself is optimized, even when I force adopt my sd card, it goes so well. Big thank you for this.
Ps. I rooted pixel os just by installing the apk, patching the boot.img of pixel os, flash it to recovery, reboot and direct install of magisk
hdt25 said:
I have a custom rom installed on my realme C3 device, Can I directly install pixelos on it ,or should i revert back to rmui ?
Click to expand...
Click to collapse
You need to revert back to rmui1.0 first before you proceed flashing pixel os
Hi, I have an AU prepaid ( optus ) c3 OV, can I install this on the phone?
For those who have a problems in excessive heating during charging after using otg, disable the otg at realme settings of this rom. This should fix the overheating of the phone. Since the otg in pixel os doesn't have a mechanism to turn off itself, you should manually disable it once you used this feature
This ROM is simply awesome. Thanks @sarthakroy2002 for this, this has literally transformed this phone into something actually useful. Question: what's the cabc display option about?
jacoghi said:
This ROM is simply awesome. Thanks @sarthakroy2002 for this, this has literally transformed this phone into something actually useful. Question: what's the cabc display option about?
Click to expand...
Click to collapse
CABC is a stock realme feature... It means Content based battery consumption... It is very useful.
sarthakroy2002 said:
CABC is a stock realme feature... It means Content based battery consumption... It is very useful.
Click to expand...
Click to collapse
Thanks for the explanation, I'm assuming leaving it enabled is for the best, then. Any plans on building Lineage 19.1 with your trees? Thanks again for the awesome work, rom working perfectly so far.
How can i turn off the phone by double tapping home screen? btw nice rom this is good i can use this as daily driver but sometimes when i use the switch button (3 navigation) its automatically switching app, it's also stuttering when scrolling in some apps but thats ok because i only have 3gb ram. Performance issues in youtube and is some cases.
@sarthakroy2002, There seems to be some inconsistency between this little script that comes in the packages called dynamic_partition_op_list. The system_ext in the ArrowOS 12.1 package is resized to a much larger size, actually almost double what the PixelOS system_ext is resized to, even though the compressed package is much smaller than PixelOS'.
The other thing is that apparently the wakelocks in the roms seem to stem from this stp_dump process, apparently mediatek related (logger ?) getting a permission denied that keeps going forever. Seems to be at a system level? Is that something that can be addressed through SEPolicy?
Thanks again for the great work,
jacoghi said:
@sarthakroy2002, There seems to be some inconsistency between this little script that comes in the packages called dynamic_partition_op_list. The system_ext in the ArrowOS 12.1 package is resized to a much larger size, actually almost double what the PixelOS system_ext is resized to, even though the compressed package is much smaller than PixelOS'.
The other thing is that apparently the wakelocks in the roms seem to stem from this stp_dump process, apparently mediatek related (logger ?) getting a permission denied that keeps going forever. Seems to be at a system level? Is that something that can be addressed through SEPolicy?
Thanks again for the great work,
Click to expand...
Click to collapse
Just use my latest TWRP released in TG channel... Also the stp_dump isnt granted permission to work.... I will look into the logspams soon
Sorry for my ignorance, man, what telegram channel are we talking about? Pixeloschat? Cause I couldn't find anything there. Ok, just found your sourceforge repo, I'm assuming it's that twrp you meant before. Yeah, it sure about the permissions themselves but the binary is running, killing it simply restarts the process so I couldn't test if that's the real root of the wakelock, but everything points to it. Thanks again,
will banking apps and Netflix work?
@Radheykalra As long as you don't root it, yes. Some apps don't work even with magiskhide. Netflix always works rooted or not, you just need to sideload it. Obviously no Widevine L1 so no FHD.
@sarthakroy2002, some interesting findings: the wakelock ratio which during normal idle times is 55/45 (deep sleep / awake with the screen off)goes down to 95/5 when the battery is below 15%. No battery saver turned on at all, no change on the system itself, exact same usage. Some internal process is triggering that change in behavior with the 15% thresold. Hope that helps fixing it. By the way, I changed to your build of Lineage to double check and the behavior is exactly the same.
jacoghi said:
@Radheykalra As long as you don't root it, yes. Some apps don't work even with magiskhide. Netflix always works rooted or not, you just need to sideload it. Obviously no Widevine L1 so no FHD.
Click to expand...
Click to collapse
Do u have any idea how to get hd audio to work (LDAC ) to work, it was working on realme ui and now it's greyed out