{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Downloads
Hotdogb (OP7T): Download Link | Google Drive Mirror | SHA256SUM
Follow us on Telegram for updates and faster(?) responses
Chat
Updates
How to flash using fastbootd:-
Dump the ROM zipfile through payload_dumper
Code:
fastboot flash recovery recovery.img
Connect your device to a computer and execute:
Code:
fastboot reboot fastboot
Check this by using the command
Code:
fastboot getvar is-userspace
Flash each partition (be sure to open the terminal window in the folder you extracted the payload):
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash product product.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vendor vendor.img
Reboot to system
ROM OS Version: Android 11
XDA:DevDB Information
Yet Another AOSP Project, ROM for the OnePlus 7T
Contributors
OmkarTheAndroid, idoybh, poad42
Source Code: https://github.com/yaap
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.x
ROM Firmware : OOS 11 Global Stable
Based On: AOSP
Version Information
Status: Stable
Created 2020-10-14
Last Updated 2021-05-20
Changelog:
ROM:
• Improve volume dialog code & fix the expand animation
• Simplify OpenDelta auto download network option
• Make emergency tile in powermenu look better
• Swipe down to expand statusbar in Launcher3
• Add an option to choose primary overlay (bg dark color)
• Many minor visual fixes in settings (and other minor changes)
• Merged latest CAF tags wherever relevant
• Bug fixes in recovery
• Updated some APNs
• Some other minor changes
Device:
• Update FOD zOrder
• Optimize native executables for Cortex-A76 CPU
• Re-introduce cleaned up raise to wake implementation
• Add Wake Device Action to off screen gestures
• Cleanup/update more blobs
NOTE: You must clean flash and format data/internal storage to f2fs.
Custom kernels will need to explicitly support YAAP for new userdata changes.
Steps to go enable Widevine L1 on custom ROMs :-
• Flash OOS 11 stable or any build from OB3 and above
• Flash magisk and enable magisk hide
• Reboot
• Verify if you have L1 working using app like drm info
• Local upgrade OOS 11 stable or any build from OB3 and above
• Reboot
• Verify if you have L1 working using app like drm info
• Flash custom ROM and you should have L1 there as well
Note: you only need to do this once
Noice
Can i get root like as other android 10 rom?
Does it have the stock camera app? Is it good enough to be daily used ?
ivan tele said:
Does it have the stock camera app? Is it good enough to be daily used ?
Click to expand...
Click to collapse
Its still in Beta stage. We may expect bugs.
Looks great! Can anyone confirm 90hz functionality? What about fingerprint and/or face unlock?
vibraniumdroid said:
Looks great! Can anyone confirm 90hz functionality? What about fingerprint and/or face unlock?
Click to expand...
Click to collapse
90hz is working. Somehow the oneplus settings were not there from the beginning but they showed up after a while. You can set it to 90hz there. Fingerprint works as good as any other aosp based rom. No faceunlock at all
Wow. Did it before OnePlus.....this company is ****. Congratulations guys! Thanks for the hard work!
abadasstanker69 said:
Wow. Did it before OnePlus.....this company is ****. Congratulations guys! Thanks for the hard work!
Click to expand...
Click to collapse
They really are sht, even the new 8t has screen issues too. Don't think I'm going to be upgrading to another OnePlus after I've had a few years with my 7t
HatRiGt said:
Its still in Beta stage. We may expect bugs.
Click to expand...
Click to collapse
I have been dd'ing this for weeks so its fine (?), the beta tag is just to scare off any potential people who might not be ready to deal with some random bug
Hi Guys,
Thanks for the ROM already installed, but on first restart got bootloop phone is stuck in "Phone is starting".
ro11er said:
Hi Guys,
Thanks for the ROM already installed, but on first restart got bootloop phone is stuck in "Phone is starting".
Click to expand...
Click to collapse
Were you able to resolve this...
Really nice rom, already installed and all working good ^^
__Passe_ said:
Really nice rom, already installed and all working good ^^
Click to expand...
Click to collapse
how you flashed this rom ??
i tried using recovery, but it boot-looped in recovery again and again
shaanu said:
how you flashed this rom ??
i tried using recovery, but it boot-looped in recovery again and again
Click to expand...
Click to collapse
I did it using fastboot like all other roms ^^
Bro how would you flash the next build. But tge rom is running great. Rooted installed viper evrything works flwaless and even banking apps are running for me
No reinstalled again and on first reboot again stuck
ro11er said:
No reinstalled again and on first reboot again stuck
Click to expand...
Click to collapse
I just installed it and it is working very well . First install OOS latest release then try to install it . I am using fastboot to install custom roms . It is easiest way for me .
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for DeviceName [RMX1911]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 9.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
NFC
Lights
Sound / vibration
Facelock
Known issues
You Tell
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 9.0.0_r46
Security patch level: December 2019
Build author/Device Maintainer: @iamlordutkarsh
Kernel Source code: https://github.com/realme-kernel-opensource/realme5-kernel-source
Device Tree: https://github.com/Realme-RMX1911/device_realme_RMX1911
Vendor Tree: https://github.com/Realme-RMX1911/vendor_realme_RMX1911
Source code: https://github.com/PixelExperience
ROM Developer: iamlordutkarsh
Bugs Found
1. CTS Failing
3. Aux Camera Support
2. Selinux Permissive
Hoping To Get Fixed Soon
mizdrake7 said:
Bugs Found
1. CTS Failing
3. Aux Camera Support
2. Selinux Permissive
Hoping Hoping To Get Fixed Soon
Click to expand...
Click to collapse
1. Use magisk props hide to fix it
2. I haven't found a workaround too, so F.
3. Yup, it's still a WIP
but overall it's already stable enough to use as an daily driver.
mizdrake7 said:
Bugs Found
1. CTS Failing
3. Aux Camera Support
2. Selinux Permissive
Hoping Hoping To Get Fixed Soon
Click to expand...
Click to collapse
CTS can be fixed via Magisk Module !
Other 2 we will look in future updates
I have a locked bootloader.. stock rom..
Please can anyone mention the steps to flash this ROM?
Unlock Bootloader First
Jaiii said:
I have a locked bootloader.. stock rom..
Please can anyone mention the steps to flash this ROM?
Click to expand...
Click to collapse
https://c.realme.com/in/post-details/1184729509568446464
Follow This Guide
I jave locked bootloader i can't root my device and can't flash twrp
What about lockscreen and fingerprint.?
iamlordutkarsh said:
CTS can be fixed via Magisk Module !
Other 2 we will look in future updates
Click to expand...
Click to collapse
how to flash this rom from realme ui
Please develop Android 10 rom
How to installing ?
wil fingerprint and face unlock work ?
Bug:
Can't connect to hidden wifi.
finally i done
i try many time but i cant, i unlock bootloader and flash TWRP and wipe all and Flash rom and restart but not thing heppen, What i miss
sseevaja said:
i try many time but i cant, i unlock bootloader and flash TWRP and wipe all and Flash rom and restart but not thing heppen, What i miss
Click to expand...
Click to collapse
Well, since this is a Custom ROM, I have noticed that some of them require you to flash a patched Vendor image just before flashing the ROM itself. Could this ROM be similar?
But, just so we're clear, the following are the steps you can follow (generally speaking):
Flash latest TWRP
Boot into your recovery
Wipe cache, dalvik cache, system,data, vendor, internal storage (if you're encrypted)
Flash Vendor image
Flash ROM
Flash Gapps (optional)
Reboot and wait for ROM to start
Hey guys!
I'm liking the ROM, but I just had a few questions:
1. Dark mode in settings isn't system-wide on my installation.
2. Photos aren't deleting. I delete them (tried with Camera app, Google Photos, and even File manager). But they're not deleting. It says deleted but they're still visible on phone. This photos issue I also experienced on Lineage 16.
Anybody have some ideas as to what I could do? I'd appreciate any help. Thanks!
boydee said:
Well, since this is a Custom ROM, I have noticed that some of them require you to flash a patched Vendor image just before flashing the ROM itself. Could this ROM be similar?
But, just so we're clear, the following are the steps you can follow (generally speaking):
Flash latest TWRP
Boot into your recovery
Wipe cache, dalvik cache, system,data, vendor, internal storage (if you're encrypted)
Flash Vendor image
Flash ROM
Flash Gapps (optional)
Reboot and wait for ROM to start
Click to expand...
Click to collapse
Vendor?
plss provide vendor link
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Downloads
Guacamole (OP7P): Download Link | Google Drive | SHA256SUM
Follow us on Telegram for updates and faster(?) responses
Chat
Updates
Flashing Procedure:
Through fastboot:
Dump the ROM zipfile through payload_dumper
Reboot to bootloader
Flash each partition (be sure to open the terminal window in the folder you extracted the payload):
```fastboot flash boot boot.img```
*if you never formatted to f2fs reboot to recovery and format
```fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img```
Reboot to system
XDA:DevDB Information
Yet Another AOSP Project, ROM for the OnePlus 7 Pro
Contributors
OmkarTheAndroid, idoybh, poad42
Source Code: https://github.com/yaap
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.x
ROM Firmware : OOS 11 Global Stable
Based On: AOSP
Version Information
Status: Stable
Created 2020-10-14
Last Updated 2021-04-20
Changelog:
ROM:
• Improve volume dialog code & fix the expand animation
• Simplify OpenDelta auto download network option
• Make emergency tile in powermenu look better
• Swipe down to expand statusbar in Launcher3
• Add an option to choose primary overlay (bg dark color)
• Many minor visual fixes in settings (and other minor changes)
• Merged latest CAF tags wherever relevant
• Bug fixes in recovery
• Updated some APNs
• Some other minor changes
Device:
• Update FOD zOrder
• Optimize native executables for Cortex-A76 CPU
• Re-introduce cleaned up raise to wake implementation
• Add Wake Device Action to off screen gestures
• Cleanup/update more blobs
NOTE: You must clean flash and format data/internal storage to f2fs.
Custom kernels will need to explicitly support YAAP for new userdata changes.
Steps to go enable Widevine L1 on custom ROMs :-
• Flash OOS 11 stable or any build from OB3 and above
• Flash magisk and enable magisk hide
• Reboot
• Verify if you have L1 working using app like drm info
• Local upgrade OOS 11 stable or any build from OB3 and above
• Reboot
• Verify if you have L1 working using app like drm info
• Flash custom ROM and you should have L1 there as well
Note: you only need to do this once
Noice
Been using test builds from the TG group for almost 2 weeks now and this rom is fantastic!
Sent from my OnePlus7Pro using XDA Labs
Gapps included?
Hello zot tout!
Any screenshots are possible please?
Best regards
Kaldun13 said:
Gapps included?
Click to expand...
Click to collapse
Yes
Sent from my OnePlus7Pro using XDA Labs
Kaldun13 said:
Gapps included?
Click to expand...
Click to collapse
yep
nico97470 said:
Hello zot tout!
Any screenshots are possible please?
Best regards
Click to expand...
Click to collapse
present in the screenshots section
OmkarTheAndroid said:
present in the screenshots section
Click to expand...
Click to collapse
Sorry, but I don't see where it is?!
Envoyé de mon OnePlus 7 Pro en utilisant Tapatalk
ÉDIT : SEEN
nico97470 said:
Sorry, but I don't see where it is?!
Envoyé de mon OnePlus 7 Pro en utilisant Tapatalk
ÉDIT : SEEN
Click to expand...
Click to collapse
it the 2nd tab, here https://forum.xda-developers.com/devdb/project/?id=42725#screenshots
Android 11 Magisk Root
I have tested it and it works, don't install Magisk Manager, if you have one installed, remove it, the zip already have a mudded one. Boot TWRP and flash the Magisk A11.zip file as usual
Please hit the like button if I was able to help
nkhater said:
I have tested it and it works, don't install Magisk Manager, if you have one installed, remove it, the zip already have a mudded one. Boot TWRP and flash the Magisk A11.zip file as usual
Please hit the like button if I was able to help
Click to expand...
Click to collapse
I have flashed the same but I can't hide the magisk .. it trying to download then says "Failed to hide magisk"
I have installed the rom and it's working great. Magisk, youtube vanced, viper4android, everything working fine.
The only issue I have found is launchers crash all the time. I use Nova or Lawchair 2.1 and they keep crashing.
Anyone experiencing this issue?
NFC working?
Can this Rom be dirty flashed on top of OOS without losing data or having bootloop????
I am on stable OOS,rooted, twrp and encrypted...
kpmohamedhussain said:
Can this Rom be dirty flashed on top of OOS without losing data or having bootloop????
I am on stable OOS,rooted, twrp and encrypted...
Click to expand...
Click to collapse
No. As with any Stock Rom, you must format your data
ImjustSaiyan92 said:
No. As with any Stock Rom, you must format your data
Click to expand...
Click to collapse
But its mentioned in OP about dirty flash
kpmohamedhussain said:
But its mentioned in OP about dirty flash
Click to expand...
Click to collapse
If you noticed it also said clean flash if you are coming from any other ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Feel The Sting!
Since we have no working TWRP for Android 11, we have to flash with our own custom recovery. In the download section below, you will find a boot image and the ROM zip. You need to download both and follow the install instructions.
Downloads:
Coral
Installation:
For First Time Install, you must clean flash! Check the upload date, this will let you know which factory image you need to be on before flashing your device.
1) Plug the device into a PC and open a terminal
2) adb reboot bootloader
3) fastboot flash boot boot.img --slot all
4) fastboot reboot-bootloader
5) Using the device volume buttons, select Recovery Mode
6) Use the custom recovery to Factory reset the device
7) When it's done, select Apply update followed by Apply from ADB
(This will allow you to sideload the ROM zip)
8) adb sideload the_rom.zip
**** Terminal will sit at 47%,wait and watch the phone let the phone finish it will take few min
If you need help flashing come to support chat and ask like a Human....
Code:
# Example (using a Wildcard shortcut)
adb sideload S*.zip
9) Reboot system and Enjoy
Contributors
NepoRood, dabug123
ROM Source: ROM
Kernel Source: Kernel
Device Source: Device
Version Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: AOSP, ABC, DU
Status: Stable
Current Stable Version: v4.x
Stable Release Date: 2020-12-17
Additional Info
This rom is not meant to be the most feature filled, nor do we claim it is the fastest, or most streamlined. This is just a fun project for us to release our daily irritability.
Features:
GApps are included
Display Settings:
QS panel:
-Quick pulldown
-QS rows and columns
*Status bar
-Battery Styles
Lockscreen Weather
Lockscreen tweaks:
-Clock styles
-Now Playing
-Media art
-Always on when charging
Gestures:
Activate the Torch w/Power button
Full Screen Gesture navigation
Custom Gesture actions
Power Menu:
Advanced Power menu (Restart, Recovery, Bootloader, SystemUI)
Google Wallet
Other Info:
Pixel Stand is charging only, stock features are mostly working just few left to fix up.
Join us on Telegram for the latest news and discussion: Link
Credits:
(In alphabetical order)
@ezio84
@Mazda
@NYCHitman1
The hard working people at ABC and DU
And anyone I forgot...
#Reserved
Awesome thanks I'll definitely test the ROM out!
To fix assistant behaviour for now, add Russian as a secondary assistant language. This will revert assistant to old ui and fix screen off ok google
Any screenshots of this ROM?
great news. thank you very much
I'll test this evening...
Any bug knowed?
ROM installed.
Works fine.
Can I disable AOD? Don't see the option.
New build coming soon:
Feb patch merged
Now builds will ship with sultan kernel built inline
gibranm said:
New build coming soon:
Feb patch merged
Now builds will ship with sultan kernel built inline
Click to expand...
Click to collapse
how to properly patch with magisk?
New builds out on drive!
Changelog:
February patch merged
Sultan Kernel is now built inline
Scramble pin layout option added
Smoother upload/download animations
New themes
boot image is giving me "error boot prepare". trying to do clean flash.
update: looks like i need to use 04-02 boot.img and not 17-02.
[email protected] said:
boot image is giving me "error boot prepare". trying to do clean flash.
update: looks like i need to use 04-02 boot.img and not 17-02.
Click to expand...
Click to collapse
Yeah, did the same last night as well, lol. Forgot to say something about it.
Took a little while to figure out it was the boot.img coming from exploring Android 12.
New build
Changelog:
March Patch merged
Synced with sultan source
Disabled aod (will restore once I figure out how to get the toggle back)
Clean flash recommended!
Download: https://drive.google.com/drive/folders/1mKeAwh6OuWegCKIMje12vX0GUUUSn8fo?usp=sharing
gibranm said:
New build
Changelog:
March Patch merged
Synced with sultan source
Disabled aod (will restore once I figure out how to get the toggle back)
Clean flash recommended!
Download: https://drive.google.com/drive/folders/1ZZQbjZomMwpeJIquvCnpjYC8BDuMUJLl
Click to expand...
Click to collapse
I am going to test this, just a heads up, only boot.img is in the drive:
GROOVYJOSHCLARK said:
I am going to test this, just a heads up, only boot.img is in the drive:
Click to expand...
Click to collapse
Thanks for the heads-up. Gave the wrong link. Post amended. Here's the correct link:
Scorpion - Google Drive
drive.google.com
gibranm said:
Thanks for the heads-up. Gave the wrong link. Post amended. Here's the correct link:
Scorpion - Google Drive
drive.google.com
Click to expand...
Click to collapse
Rock on, thanks! I am currently running the latest Scorpio, so far I am liking it. Stable, no bugs, no issues, and so far, pretty decent battery. I will test it for a few days unless I have any show stoppers but I just finished rebuilding my PX4 using Scorpion without any hiccups or issues!
any update of this rom?
phuphat1986 said:
any update of this rom?
Click to expand...
Click to collapse
You can find some updated unofficial Coral builds over on Telegram.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BlissRoms comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customization's across all platforms you run Bliss on.
BlissRoms Download
Code:
[/B][/SIZE][/CENTER]
[SIZE=5][B][CENTER]-Make sure you are on the latest OOS 12
- Dump the BlissROM zipfile through payload_dumper
- flash the partition images with the following commands
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- Reboot and #StayBlissful
Create Bug Report on our Issues Tracker
BlissRoms Github
BlissRoms Gerrit
Kernel Source
| Website | Blog | Facebook | Twitter | Instagram | Telegram Group | Telegram Channel | Docs
If someone wants to donate, please do so via this PayPal link
Thank you for using BlissRoms! And as always: #StayBlissful
Notes:Oneplus Cam included but video recoerding is not working. GCam GO is also included.
reserved too
I see the installation process is different than the usual factory wipe from recovery, and then flash zip to both sides. Would this process not work?
jp85041 said:
I see the installation process is different than the usual factory wipe from recovery, and then flash zip to both sides. Would this process not work?
Click to expand...
Click to collapse
There are a couple of ways to flash this rom. The important thing is that you are on the latest OOS 11 on the slot you are going to flash the rom on. One way to flash is to follow the install instructions in the first post or what I like to do is flash it through twrp. The problem is decryption doesn't work so you will have to have the rom image on a flash drive. I always recommend formatting data when the android version changes.
Noob question here. Why is it necessary to get the various img files via payload dumper? Why can't they just be assembled in a rar/zip file? Thanks
I love the ROM, haven't ran Bliss since the OnePlus One iirc, not bad at all. Visible works too so that's a plus. Thank you! Aside from going with something like substratum, is there a way to change accent color? I looked in Themes under Blissify settings but can't find where to change it. The only bugs I have had was the screen not coming back up until clicking power but it was literally one time and only waited 5 seconds to resolve.
Does it have built-in phone recorder
Not by default as far as I have seen, not something I looked into that closely. Fun note, my phone is also a bit glitchy compared to others, so don't take my weird issues as representative of the entire ROM, but if I watch videos that have too loud of a noise and I have my volume turned all the way up, my phone powers down. Happened on the daily dose of internet video where they show a slow motion bolt being cut.
Bliss is one of the best custom roms I have experienced, thanks for beating this titan work to support oneplus 7 pro
New build v16.2
Many new features
Built on OOS 12 firmware
GCam
Download: https://downloads.blissroms.org/media/guacamole/Bliss-v16.2-guacamole-OFFICIAL-gapps-20221226.zip
Rom Changelog: https://blog.blissroms.org/2022-12-06-typhoon-16.2-updates-dec-2022/
Enjoy!
srgrusso said:
There are a couple of ways to flash this rom. The important thing is that you are on the latest OOS 11 on the slot you are going to flash the rom on. One way to flash is to follow the install instructions in the first post or what I like to do is flash it through twrp. The problem is decryption doesn't work so you will have to have the rom image on a flash drive. I always recommend formatting data when the android version changes.
Click to expand...
Click to collapse
Are you sure we need to be on oos11 firmware? Most other A13 roms require A12 firmware
bobbylo said:
Are you sure we need to be on oos11 firmware? Most other A13 roms require A12 firmware
Click to expand...
Click to collapse
A12 Firmware. I flashed a couple days back. Running great.
sfacimma said:
A12 Firmware. I flashed a couple days back. Running great.
Click to expand...
Click to collapse
ok,thanks
bobbylo said:
ok,thanks
Click to expand...
Click to collapse
hey,one more question,How did you flash this,just from the bootloader?Or from the recovery fastboot mode? Thanks
what may be the problem when I use bliss 16.2 in oneplus 7 pro the phone heats up quite a bit and discharges quickly while with other roms everything is normal
bobbylo said:
hey,one more question,How did you flash this,just from the bootloader?Or from the recovery fastboot mode? Thanks
Click to expand...
Click to collapse
Sorry. Didn't see this earlier. Here's what I did......
Extract the boot.img from the payload.bin
From cmd prompt:
adb reboot bootloader
Once in bootloader, and from cmd prompt:
fastboot flash boot boot.img
Reboot to Recovery
--wipe/format (you'll lose all data/pics/files)
--Install via ADB option (I forget the actual option name)
Then, from cmd prompt on PC:
adb sideload Rom_Name.zip
When completed (after sitting at 47% for a while):
--Reboot to System option
Thanks for this Bliss, nice work !
sfacimma said:
A12 Firmware. I flashed a couple days back. Running great.
Click to expand...
Click to collapse
Can you guide me how I should flash oos 12 on both slots? since MSM tool only flashes to one slot
Obnomus said:
how I should flash oos 12 on both slots?
Click to expand...
Click to collapse
Go to crDroid 13 thread, it says in red text where to get the tool for flashing 12 firmware in both slots.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BlissRoms comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customization's across all platforms you run Bliss on.
BlissRoms Sunfish Download
BlissRoms Fastboot Images
BlissRoms Recovery Boot Image
Clean Flash (If coming from other Rom's/Stock)
- Download BlissRoms Factory zip
- Reboot to bootloader
- Run following
Code:
fastboot update -w zipname
- Once flashing is complete reboot your device and wait until bliss boots
- #StayBlissful
Dirty Flash (If you where on BlissRom already!)
- Download Recovery boot.img from above download link.
- Reboot to bootloader and flash boot.img via fastboot using following command
Code:
fastboot flash --slot all boot boot.img
- Reboot to recovery
- Select Apply Update -> Apply Update from ADB to flash BlissRom zip and then run following command
Code:
adb sideload blissrom-zipfilename.zip
- Wait till installation is completed.
- Reboot
Wait for Bliss logo to show up....
#StayBlissful
Create Bug Report on our Issues Tracker
BlissRoms Github
BlissRoms Gerrit
Kernel Source
| Website | Blog | Docs
| Facebook | Twitter | Instagram | Telegram Group | Telegram Channel |
If someone wants to donate, please do so via this PayPal link
Thank you for using BlissRoms! And as always: #StayBlissful
Credits
- Huge Thanks to @raifordbruce for testing this build
jackeagle said:
Credits
- Huge Thanks to @raifordbruce for testing this build
Click to expand...
Click to collapse
Hi Jack,
Thanks for keeping my daughter's Sunfish alive cheers,
Sébastien.
Dears, could you please clarify clean installation?
Should I flash Bliss-v16.3-sunfish-OFFICIAL-gapps-Fastboot-20230113.zip by fastboot update -w zipname?
OR Bliss-v16.3-sunfish-OFFICIAL-gapps-20230114.zip???
.: SID :. said:
Dears, could you please clarify clean installation?
Should I flash Bliss-v16.3-sunfish-OFFICIAL-gapps-Fastboot-20230113.zip by fastboot update -w zipname?
OR Bliss-v16.3-sunfish-OFFICIAL-gapps-20230114.zip???
Click to expand...
Click to collapse
fastboot update -w Bliss-v16.3-sunfish-OFFICIAL-gapps-Fastboot-20230113.zip
Hi guys! This Rom have navbar options? (one tap action, long press action ecc) like CrDroid 12 rom?
Hi @jackeagle
Reported a bug on your tracker.
I can't setup a fingerprint unlock...
Did you already know about it?
Otherwise, it's pretty nice!
Cheers,
Sébastien.
5.1 said:
Hi @jackeagle
Reported a bug on your tracker.
I can't setup a fingerprint unlock...
Did you already know about it?
Otherwise, it's pretty nice!
Cheers,
Sébastien.
Click to expand...
Click to collapse
ive had no problems with fingerprint unlock and ive been using this rom as my daily driver since its release
Marcia8246 said:
Hi guys! This Rom have navbar options? (one tap action, long press action ecc) like CrDroid 12 rom?
Click to expand...
Click to collapse
there is long press home for assistant app and invert navigation bar layout .thats all for now
raifordbruce said:
ive had no problems with fingerprint unlock and ive been using this rom as my daily driver since its release
Click to expand...
Click to collapse
Hello,
Wow, this is weird. This phone has no mods, no root, nothing. It used to work on stock Google firmware the day before I install it. That's why I thought it was a bug... Well, my daughter's got all her apps installed now. So she'll leave with it.
Cheers,
Sébastien.
How to get boot.img to patch with magisk, I am on the latest build.
noufal_pp said:
How to get boot.img to patch with magisk, I am on the latest build.
Click to expand...
Click to collapse
First post, Downloads - BlissRoms Recovery Boot Image
Is that the recovery image or kernel?
I am currently running Bliss Android 11 (BlissRoms 14.7). If I go into Settings>System>Bliss Updater I can download it but not install it from the UI. The OP implies I can dirty flash v16.3 (A13) over v14.7 (A11).
I'm not planning to do it soon, but just want to confirm I can flash 16.3 over 14.7?
Thank you BlissROM v16.4 for pixel4a released today.
I updated from v16.3 by Dirty Flash method.
(I got boot.img file from payload.bin by Payload Dumper)
The most notable changes are the following points, and
Play Integrity API Checker/YASNAC check passed without Magisk and USNF module.
"Updated PixelPropsUtils to make SafetyNet working again"
I like New QS Panel Styles(Icon shape, Transparency).
DiamondJohn said:
I am currently running Bliss Android 11 (BlissRoms 14.7). If I go into Settings>System>Bliss Updater I can download it but not install it from the UI. The OP implies I can dirty flash v16.3 (A13) over v14.7 (A11).
I'm not planning to do it soon, but just want to confirm I can flash 16.3 over 14.7?
Click to expand...
Click to collapse
Bump...
jackeagle said:
...snip...
Clean Flash (If coming from other Rom's/Stock)
- Download BlissRoms Factory zip
- Reboot to bootloader
- Run following
Code:
fastboot update -w zipname
- Once flashing is complete reboot your device and wait until bliss boots
- #StayBlissful
...snip...
Click to expand...
Click to collapse
Am I correct to assume "BlissRoms Factory zip" is the "Bliss-v16.3-sunfish-OFFICIAL-gapps-Fastboot-20230113.zip" image? and then use the OTA to update to 16.4?
DiamondJohn said:
Am I correct to assume "BlissRoms Factory zip" is the "Bliss-v16.3-sunfish-OFFICIAL-gapps-Fastboot-20230113.zip" image? and then use the OTA to update to 16.4?
Click to expand...
Click to collapse
Yup you are right. Extract fastboot zip and run the script
DiamondJohn said:
Bump...
Click to expand...
Click to collapse
Not recommended to take that huge leap without wiping data. you might encounter terrible bugs since you are upgrading over 2 generation worth of Android Upgrade
jackeagle said:
Not recommended to take that huge leap without wiping data. you might encounter terrible bugs since you are upgrading over 2 generation worth of Android Upgrade
Click to expand...
Click to collapse
FYI I am attempting building the ROM from source. I have a really weird thing where the prebuilt webview.apk is only 134 bytes from a repo sync; every time. I checked the google source targeted by the manifest, and manually downloaded that at around 55MB (and placed it in the local source), but then it fails at 80%. I have previously been using the Telegram Build Bliss channel, but now its at a point I think I will need to document the error more and explain how the repo sync fails for webview.apk. I am hoping that any repo sync fix, also fixes the other fail. I think I got a fail at around 90%, its not always the same when it fails.
However, by chance I have developed a pretty bad cold/flu that worsened today and it has totally wiped me out, so building may be pushed aside. I'm pretty sure its not COVID (I think I have a spare RAT test lying around somewhere), no cough, my lungs feel fine and I got 100% oxygen saturation earlier today. But it has really developed quickly later in the day and wiped me out, whatever it is