Hey guys, has anybody tried the new OOS12 on a tmobile variant yet and works fine?
I tried the first oos12 on my globally converted tmobile and it wont read the sim card at all.
Thanks!
infamousvincci said:
Hey guys, has anybody tried the new OOS12 on a tmobile variant yet and works fine?
I tried the first oos12 on my globally converted tmobile and it wont read the sim card at all.
Thanks!
Click to expand...
Click to collapse
C39 is really nice. Need to be on Beta 1 and updated to latest. Super stable and battery life has been the best I've seen on this 9 yet. Faced UI issues while watching Netflix. Dual hole punch out at top of screen on either side and near halfway bleeding black arches. Once Netflix closes it stays on screen for a few seconds then goes away. That's really the only issue I had on C39. BTW, 9(non pro) TMobile converted to Global. Everything works fine,no data issues or anything
avid_droid said:
C39 is really nice. Need to be on Beta 1 and updated to latest. Super stable and battery life has been the best I've seen on this 9 yet. Faced UI issues while watching Netflix. Dual hole punch out at top of screen on either side and near halfway bleeding black arches. Once Netflix closes it stays on screen for a few seconds then goes away. That's really the only issue I had on C39. BTW, 9(non pro) TMobile converted to Global. Everything works fine,no data issues or anything
Click to expand...
Click to collapse
Are you rooted or youre running stock? Im thinking of jumping straight to it from oos 11.
infamousvincci said:
Are you rooted or youre running stock? Im thinking of jumping straight to it from oos 11.
Click to expand...
Click to collapse
Are you running 11.2.9.9?
TMO EU MSM conversion back to stock,
Speed through set up and Unlock bootloader ,
Update to 11.2.9.9
Install OB1 and use wifi to update to C.39,
Understand that data will be iffy the first 2 Betas but should catch later during install,
Once updated to C.39,factory reset(optional) and let sit. Data will catch after a moment.
Every reboot data will stick,just takes a bit.
I run it rooted with patching boot.img and run magisk v23 no issues
No need to use TMO MSM anymore. I haven't used it in a long time. I always stay converted so I use the conversion MSM always
avid_droid said:
No need to use TMO MSM anymore. I haven't used it in a long time. I always stay converted so I use the conversion MSM always
Click to expand...
Click to collapse
Hmmm. Gotcha gotcha! Lemme try it tomorrow. Ill try to update through the official way haha. Thanks man!
infamousvincci said:
Hmmm. Gotcha gotcha! Lemme try it tomorrow. Ill try to update through the official way haha. Thanks man!
Click to expand...
Click to collapse
No problem
Related
Hey not sure if they just forgot to block the keyword detection in the betas or what, but im ecstatic as Ok Google now works with screen off and not charging, without any hacks to make it work. Take a hint samsung, we dont want Bixby, we have google assistant!
Finally! Is getting on beta program hassle?
Also does the AOD rotate yet too?
I flashed the beta like outlined here, and all is working great, i even used the home_csc and didnt lose data. https://forum.xda-developers.com/galaxy-s8+/how-to/guide-oreo-beta-usa-snapdragon-s8-t3700907 You can save some download time by downloading the sprint version AQGL from http://updato.com/firmware-archive-select-model?record=C18873D0936C11E7963AFA163EE8F90B instead of sammobile.
d33dvb said:
I flashed the beta like outlined here, and all is working great, i even used the home_csc and didnt lose data. https://forum.xda-developers.com/galaxy-s8+/how-to/guide-oreo-beta-usa-snapdragon-s8-t3700907 You can save some download time by downloading the sprint version AQGL from http://updato.com/firmware-archive-select-model?record=C18873D0936C11E7963AFA163EE8F90B instead of sammobile.
Click to expand...
Click to collapse
Did you flash QKM?
You must be on AQGL baseband, as outlined in the thread but you can get that image from updates and it's a faster download.
d33dvb said:
You must be on AQGL baseband, as outlined in the thread but you can get that image from updates and it's a faster download.
Click to expand...
Click to collapse
Do you know if it is possible to flash to XAS from XAA without carrier switching?
Note that there is a strong possibility that this is actually dictated by google play services , probably at the request of samsung.
Actually currently on nougat with my current play services i dont get assistant with screen off and charging. It did work previously and I can probably manually roll back, SOS sadly once Sammy oreo is finalized, they'll give a nod to google to disable Assistant on screen off again.
Sent from my phone
msk said:
Do you know if it is possible to flash to XAS from XAA without carrier switching?
Click to expand...
Click to collapse
I believe so, I was on verizon, rooted with samfail. I just odin'd the sprint version, then updated the oreo beta from my sdcard. Works GREAT! Battery life is wonderful, everything is butter.
Everything is verizon branded too, in case you were wondering.
OK googl not working with screen off despite of explicitly allowing voice unlock, is a bug. If it is gone, it is fixed rather than enabled.
d33dvb said:
I flashed the beta like outlined here, and all is working great, i even used the home_csc and didnt lose data. https://forum.xda-developers.com/galaxy-s8+/how-to/guide-oreo-beta-usa-snapdragon-s8-t3700907 You can save some download time by downloading the sprint version AQGL from http://updato.com/firmware-archive-select-model?record=C18873D0936C11E7963AFA163EE8F90B instead of sammobile.
Click to expand...
Click to collapse
Would you say the Oreo beta is stable enough for everyday use? This Okay Google feature is enough for me to ditch Samsung's rom...
HarinderG said:
Would you say the Oreo beta is stable enough for everyday use? This Okay Google feature is enough for me to ditch Samsung's rom...
Click to expand...
Click to collapse
I would say its completely a DD. I havent had one problem.
Also, Bixby was the reason for the Ok Google hotword not working, it doesnt work on any galaxy, but works flawless on aosp.
Based on the comments I wasn't alone in this issue but I haven't seen a fix. I even went so far as to use the MSM tool to no avail. Any suggestions on how I can get this thing back to life?
Flash lineage over 10.0.3 oos. Or one of the betas. It's weird it's like after I msm tool back to 9.5.3 I don't have or won't have cell service until I updated regular way to 10.0.3. and regular way I mean by system - system update. Or do the load local in system update
amaroney55 said:
Flash lineage over 10.0.3 oos. Or one of the betas. It's weird it's like after I msm tool back to 9.5.3 I don't have or won't have cell service until I updated regular way to 10.0.3. and regular way I mean by system - system update. Or do the load local in system update
Click to expand...
Click to collapse
Whenever I flash a rom an I ain't got no wifi or cell sign I can usually jus flash a custom Kernel an get it all back works Everytime for me
billyt1 said:
Whenever I flash a rom an I ain't got no wifi or cell sign I can usually jus flash a custom Kernel an get it all back works Everytime for me
Click to expand...
Click to collapse
Ok when you say custom kernell are you meaning like the Smurf kernel, ummm sky dragon in that sort. I haven't really had a chance to ask til now. Why I ask is for 2 reasons I have read where some call a partition a kernel. And when I first got my 7 pro last yr right before the q beta came. Tmo I was doing the international msm tool but I found away and til this day I can msm tool my other 7 pro with 9.5.3 and it will keep the network everything. But now I can not find the xda forum I read it at. And can't member what I did to make it stick like that. Our 7 pro forum has came along way.
amaroney55 said:
Ok when you say custom kernell are you meaning like the Smurf kernel, ummm sky dragon in that sort. I haven't really had a chance to ask til now. Why I ask is for 2 reasons I have read where some call a partition a kernel. And when I first got my 7 pro last yr right before the q beta came. Tmo I was doing the international msm tool but I found away and til this day I can msm tool my other 7 pro with 9.5.3 and it will keep the network everything. But now I can not find the xda forum I read it at. And can't member what I did to make it stick like that. Our 7 pro forum has came along way.
Click to expand...
Click to collapse
Yeah a custom kernel. The kernel will have its own partition jus like system ,data, modem, etc,etc, they are all partitions of the device. It would be more like kernel partition system partition data partition. You'd jus leave out the partition part so you didn't have to say 10 times
This is just for a simple discussion. I've tried flashing the open beta, and since Developer Preview 4 I've not been able to get service. Flashing other modem versions ends up breaking the phone. The new modem is also ~ half the size of the old versions.
Anyone had any luck?
I'm on DP4, should I back up my modem before updating?
Edit: It works perfectly for me on TMobile converted.
Dameon87 said:
This is just for a simple discussion. I've tried flashing the open beta, and since Developer Preview 4 I've not been able to get service. Flashing other modem versions ends up breaking the phone. The new modem is also ~ half the size of the old versions.
Anyone had any luck?
Click to expand...
Click to collapse
Did you flash Global 10.5.12 first?
I can't get any 5G with global or beta. Might need to see what's going on when I return to stock.
shaneg79 said:
Did you flash Global 10.5.12 first?
Click to expand...
Click to collapse
Yes, I flashed 10.5.12 first then did a local upgrade to open beta 1. No service at all on reboot.
Dameon87 said:
Yes, I flashed 10.5.12 first then did a local upgrade to open beta 1. No service at all on reboot.
Click to expand...
Click to collapse
Did you backup your modem before?
shaneg79 said:
Did you backup your modem before?
Click to expand...
Click to collapse
No, I've tried flashing the modem from 10.5.12 from fastboot as extracted from the payload.bin
Dameon87 said:
No, I've tried flashing the modem from 10.5.12 from fastboot as extracted from the payload.bin
Click to expand...
Click to collapse
Then you will have to flash back to the T-Mobile firmware and upgrade to 10.5.20 then reunion bootloader backup your modem and everything then covert
I have my tmobile op8 on the open beta and this was the only way I was able to have service.
1. Msm to tmobile 10.5.7
2. Flash unlock token
3. Unlock bootloader
4. Flash global 10.5.7 (I still had service at this point, and I did not flash any modem)
5. Downloaded oxygen updater apk from chrome (to avoid restoring everything from the Google play store just yet)
6. Updated to 10.5.12
7. Switched oxygen updater settings to download open beta and then flashed from system settings (still had service, no modem flash)
8. Reset the phone from settings (to go through set up and restore all my data from play store)
This was just what I had done and it did work for me so good luck if you decide to try. I only did the chrome apk file for oxygen updater to avoid having a bunch of data on my phone when going to the beta. I haven't had any weird bugs and it's been smooth for me
Not sure why some are having this issue, I have signal with no issues on beta. I was on .12 and went to beta.
I had this issue on my other OnePlus 8, a data wipe fixed my signal entirely.
Dameon87 said:
Yes, I flashed 10.5.12 first then did a local upgrade to open beta 1. No service at all on reboot.
Click to expand...
Click to collapse
That sucks. I was on 10.5.12 a couple nights ago. Decided to try DP4 because all the hype about copying OneUI was making me interested. I loved OneUI on all my Samsung devices. Missed it actually!
When I flashed DP4 I loved it. I checked this morning for Beta 1 OTA after seeing it was out. It downloaded and installed. No issues at all. I have not rooted or anything else.
The only thing I did diff was I was on DP4 before OB1. However, this really should not matter. The beta is expected to be flashed from 10.5.x AFAIK so that should not be the problem.
What's weird about this phone though, I am always seeing people reporting issues with signal after flashing. I dont get it. I have yet to loose signal. Not to say I have not had ****ty signal, thats just T-Mobile where I am at. But I can say with the latest T-MO update and the latest Beta 1 I can hit almost 100 megs down. Before these updates I was getting about 10 megs. ON all devices in my house on all carriers known to man. Occasionally I could get 11 megs down
pro_granade said:
I'm on DP4, should I back up my modem before updating?
Edit: It works perfectly for me on TMobile converted.
Click to expand...
Click to collapse
Yep, me too! I was pretty happy to have good speeds, and the latest OOS.
Ok I'm on 10.5.20 do I need to downgrade first or can I flash straight to global 10.5.12
Hi, wondered if someone could help. I have just got my phone back from the repair shop and it has been factory reset, which is fine, but it has now got an out of date OS etc on.
I've tried downloading all sorts of ROMS from the xiaomifirmwareupdate page, and it just keeps failing whichever I choose. Wondered if one of you clever souls can help?
Many thanks!
Try to flash the latest MIUI via MiFlash-Tool...
My wife had the same problem => now latest MIUI is running on her phone.
SmartJuwel said:
Try to flash the latest MIUI via MiFlash-Tool...
My wife had the same problem => now latest MIUI is running on her phone.
Click to expand...
Click to collapse
Hi thanks I run the tool yesterday but it told me I have to wait 128 hours
Hello,
Same problem here.
I updated my X3 NFC EEA as soon as updates went out, so I'm on latest (12.5.4 R).
My wife didn't update and now she's stuck on 12.0.8.0Q.
I understand I could update with Mi Flash Tool, but doesn't it require to unlock device for fastboot (and then need to wipe) ?
tbh, you're all not stuck with 12.0.8.0. eventually you'll get the update. because not all phone/device got the update at the same time. some device got the update and some others not yet, i think you just need to wait
youl_junior said:
Hello,
Same problem here.
I updated my X3 NFC EEA as soon as updates went out, so I'm on latest (12.5.4 R).
My wife didn't update and now she's stuck on 12.0.8.0Q.
I understand I could update with Mi Flash Tool, but doesn't it require to unlock device for fastboot (and then need to wipe) ?
Click to expand...
Click to collapse
I think it does, but sod it, going to try anyway
Syfer_Fever said:
tbh, you're all not stuck with 12.0.8.0. eventually you'll get the update. because not all phone/device got the update at the same time. some device got the update and some others not yet, i think you just need to wait
Click to expand...
Click to collapse
I hope you're right, as Xiaomi doesn't roll out updates for everyone at same time, but 12.0.8.0Q is pretty old (february).
beastwez said:
Hi thanks I run the tool yesterday but it told me I have to wait 128 hours
Click to expand...
Click to collapse
You mean the bootloader-unlock-tool, right?
SmartJuwel said:
You mean the bootloader-unlock-tool, right?
Click to expand...
Click to collapse
I did. I tried it again just now, it says wait 96 hours grrrr
best bet is to keep trying the updater every few hours . im on the latest version now and not once was i notified of an update , just kept checking . also try clearing the updaters cache / data , i remember that tip from my note 5 days lol
I confirm. My device is Poco X3 Indian (Non-NFC. Karna codename). Software stuck v12.0.10.0 and last update time is April. I cant flash any roms. I must wait unlock the bootloader.
As the title says OnePlus open beta 2 has been released. However on ob1 the Verizon users lost data/internet. My question is. Is anyone out here on an Na op9 using a Verizon sim and getting data. Last ob1 build was righteous and am excited for oxygen 13 they call it. But requires a data wipe if not, the rollback package that is. I hate starting over.
https://community.oneplus.com/thread?id=1184353608213725185 [OxygenOS 13 Open Beta 2 for the OnePlus 9/9 Pro]
I m using ob2 still data not working without magisk fix
Maybe you should back up and factory reset. I have everything working on Ob2. 5g ,Volte,almost all apps fine now. Only play store update broken still. I don't care about that. I love new OOs so much better than what they handed us for A12
mattie_49 said:
Maybe you should back up and factory reset. I have everything working on Ob2. 5g ,Volte,almost all apps fine now. Only play store update broken still. I don't care about that. I love new OOs so much better than what they handed us for A12
Click to expand...
Click to collapse
Yes my data is working too but at start i lost all signals but working good right now will keep testing if there is any issue with mobile data or signals then i will finalize