Database Info

bootloader question with Pic

I can't post in bootloader dev thread http://forum.xda-developers.com/showthread.php?t=1328714&page=28 so I'll post here to ask the question.
This was brought up:
tylercarter
strange mine doesnt say locked or unlocked. am i doing something wrong? where can i find the info? i thought i just held both volume rockers and power on. says "AP fastboot Flash Mode (s)" 0A.65
i know on the razr is says locked or unlocked and gives a value of 1 - 4 but i dont have that either.
maybe "s" is for special lol
mtnlion
no it means stuck like the rest of us
zoide_
Mine says:
--------------------------------
AP Fastboot Flash Mode (S)
0A.65
Battery OK
OK to Program
Connect USB
Data Cable
--------------------------------
I got excited there for a moment because it didn't say LOCKED. Then I read mtnlion's post and he crushed my dreams
Click to expand...
Click to collapse
So I checked mine and got this:
Boot mode selection menu (0A.65)
press volume up/down blah blah
normal powerup
recovery
apfastboot
bp tools
I got this from holding vol up/down and then holding power until this screen came on. So..... is this locked or unlocked? I don't have the (S) that everyone else is saying. Can someone let me know?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I was in the same position after I flashed the FXZ got the same screen. I chosse BP Tools and my phone booted up and I hope it works for you!!!

You are still locked.... We have not found an atrix2 with an unlocked bootloader yet. And there are not any "developer" edition phones with the unlocked bootloader that we can copy it from, since they don't have them for this phone (I have tried very hard to get one, and can't find them).

thanks for the heads up. I was hoping since I didn't see the (s) that I would get lucky.

Thats just the first screen. Go into the AP Fastboot menu option and you will see the other screen that was mentioned.

extide said:
Thats just the first screen. Go into the AP Fastboot menu option and you will see the other screen that was mentioned.
Click to expand...
Click to collapse
ok, I see now. crap. LOL thanks.

[Q] I need help with my OnePlus after double root (i assume)

I did flash the lollipop alpha. Realizing that there's nothing much I can do I decided to go back for CM11S. During the process I re root the phone try to flash the CM11S. And after finished flashing the phone won't boot up (even with any combination of buttons). My computer didn't pick up the phone as well. Does this mean that my One+ is bricked? Is there any solution?
Please help
My OnePlus screen never turn on after this happen to me. All the response from the phone was vibrates. Vol up/ down + power, I tried everything, but only vibrate and nothing happen after that.
If there's any help I would appreciate!!!!

Have you tried this? https://forums.oneplus.net/threads/...-solution-to-all-kinds-of-soft-bricks.142870/
Also, when you try to boot into fastboot, it does vibrate, right? Your computer should acknowledge the device is connected if that's the case.

TigerDNA said:
Also, when you try to boot into fastboot, it does vibrate, right? Your computer should acknowledge the device is connected if that's the case.
Click to expand...
Click to collapse
I have the same exact problem. My computer is acknowledged that the phone is being connected, it makes a classic windows sound of connected device into USB. But visual notification is not there as well as there is no new device displayed in the system. This just happens when I try to fastboot (power on + up button).

poisongas said:
I did flash the lollipop alpha. Realizing that there's nothing much I can do I decided to go back for CM11S. During the process I re root the phone try to flash the CM11S. And after finished flashing the phone won't boot up (even with any combination of buttons). My computer didn't pick up the phone as well. Does this mean that my One+ is bricked? Is there any solution?
Please help
My OnePlus screen never turn on after this happen to me. All the response from the phone was vibrates. Vol up/ down + power, I tried everything, but only vibrate and nothing happen after that.
If there's any help I would appreciate!!!!
Click to expand...
Click to collapse
Same here and my computer wont pick it up as a device. Ill keep tinkering/searching but if anyone has any ideas I would love to be a guinea pig.

Tidy_wave said:
I have the same exact problem. My computer is acknowledged that the phone is being connected, it makes a classic windows sound of connected device into USB. But visual notification is not there as well as there is no new device displayed in the system. This just happens when I try to fastboot (power on + up button).
Click to expand...
Click to collapse
You should still be able to push to the phone even if nothing is on the screen.

Even if it doesnt pick up the device on the computer or in cmd?

Check this post for a solution :
https://forums.oneplus.net/threads/s...us-one.104943/
start from "HERE IS THE SOLUTION"

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
shadsilvs said:
Even if it doesnt pick up the device on the computer or in cmd?
Click to expand...
Click to collapse
It did pick up as this one

TheManDroid said:
Check this post for a solution :
start from "HERE IS THE SOLUTION"
Click to expand...
Click to collapse
Will give you the resolve asap. I'm following step by step finger cross!!!!!!

You need to install the right drivers so that you can use the Msm8974DownloadTool

Unable to boot through the Mi logo

So I last time when I flash XiaoMi Mi4i I do not know why the phone seems to to bricked.
What I mean brick is :
No respond when pressing power button.
When charging no LED light.
No Recovery (Volume + and Power)
No Fastboot (Volume - and Power)
Today I manage to read a thread tha use the following instruction to save the XiaoMi Mi4i.
1. Download the Fastboot ROM.
2. Install XiaoMi Mi Flash.
3. Restart computer and disable driver signature verify.
4. Flash like normal.
The flashing process take about 720 second, The result is successful but the phone wont turn on itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I try to unplug it and press the power button. No response at all then I plug into a wall powered charger the phone show me the Mi logo then turn off the screen with a red LED blinking again and again until I unplug the phone from the power sources. This happen also when I plug the phone into the computer via USB.
The good news is that I can now enter Fastboot mode. ( I assume that my device came back from brick) but no recovery menu. I then connect the phone in Fastboot mode to the computer via USB then flash the ROM again just like normal. The result success but the phone won't power on itself so I press the power button and nothing happen.
Then
I plug into a wall powered charger the phone show me the Mi logo then turn off the screen with a red LED blinking again and again until I unplug the phone from the power sources. This happen also when I plug the phone into the computer via USB.
Click to expand...
Click to collapse
just like a moment ago.
Anyone that can help me ?

Did you try with the other fastboot version?

faizauthar12 said:
Did you try with the other fastboot version?
Click to expand...
Click to collapse
Nope but in MIUI forum there is no one complaining about the version.

ic3tea said:
Nope but in MIUI forum there is no one complaining about the version.
Click to expand...
Click to collapse
I would suggest using a MIUI 7 fastboot ROM. And a global stable one over a developer build. I ran into problems like no wifi / mobile network once, always I tried to flash the developer fastboot ROM. But once I flash a stable ROM everything was okay. Then I could easily go back to the developer ROM.
Try this,
Version: V7.2.3.0.LXIMIDA

sharan.nyn said:
I would suggest using a MIUI 7 fastboot ROM. And a global stable one over a developer build. I ran into problems like no wifi / mobile network once, always I tried to flash the developer fastboot ROM. But once I flash a stable ROM everything was okay. Then I could easily go back to the developer ROM.
Try this,
Version: V7.2.3.0.LXIMIDA
Click to expand...
Click to collapse
Will try and update you back .

Tmo Oneplus 8 stuck in Boot loader warning screen. How to fix?

I just unlocked the bootloader, installed TWRP and Magisk. I factory reset the phone in TWRP then uninstalled Magisk later. The phone reboot and stuck in booting screen. What should I do? MSM back to stock? Thanks.
Update1: I'm able to get into TWRP.
Update 2: I just MSMed back to stock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

This happened to me yesterday. Just hold the power button for a while and it should go forward. You might have to make sure you're not plugged into the charger also, but I can't remember if I did or not.

Doesn't work for me. Tried holding the power for a loooong time, does nothing. Tried vol down + power, does nothing. Tried vol up + power, device restarts, but comes back to that error screen. Mine is IN2019 (Verizon).

Sнаđошƒаӽ said:
Doesn't work for me. Tried holding the power for a loooong time, does nothing. Tried vol down + power, does nothing. Tried vol up + power, device restarts, but comes back to that error screen. Mine is IN2019 (Verizon).
Click to expand...
Click to collapse
To remove your device from the boot sequence error
Spoiler: OnePlus Fastboot Mode Using Physical Buttons
Press and hold the Volume Up’, ‘Volume Down’, and ‘Power’ keys together until the device vibrates > release buttons > enter Fastboot Mode

zrzhu said:
I just unlocked the bootloader, installed TWRP and Magisk. I factory reset the phone in TWRP then uninstalled Magisk later. The phone reboot and stuck in booting screen. What should I do? MSM back to stock? Thanks.
Update1: I'm able to get into TWRP.
Update 2: I just MSMed back to stock.
View attachment 5203089View attachment 5203089
Click to expand...
Click to collapse
How did you eventually fix it?

Sнаđошƒаӽ said:
How did you eventually fix it?
Click to expand...
Click to collapse
Sorry trade in my oneplus long time ago.

zrzhu said:
Sorry trade in my oneplus long time ago.
Click to expand...
Click to collapse
You did the right thing. This is a **** phone to have.
Like I always say, f*ck Verizon

Use factory tool to recover it

Recover unbrick OP6

Hello guys,
I need your help.
Yesterday, my phone hangged and got stuck at Qualcomm Crash Dump mode.
I was just able to enter Fastboot (Power + Volume down button) but it won't wipe date, reset to factory or enter any other mode, it would just get black and do nothing, without possibility to launch the OS.
So, I used MsmDownloadTool to reformat it with the enchilada_22_H.07_180513 ROM.
The tool succeded to download the firmware to the phone but now, when I power it on, it just go directly to fastboot and whatever I do (Start, Recovery mode, Restart bootloader), it restarts directly in fastboot mode.
The problem is my device is not unlocked (I never rooted it) so I can't use the command "fastboot oem unlock"...
Due to the use of MsmDownloadTool, I know that I won't be able to recover the data but I would like to know if there is any possibility to make the phone usable again.

Try using different versions of MSM, I used the one which had OOS 5.1.5 and it successfully booted after it showed success in MSM

Thanks for your answer.
Problem is I can't use MSM as my phone is not detected anymore. It automatically boots on fastbood mode when I plug it on my computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only see the "OnePlus Android Bootloader Interface" now.
I don't see the COM port "Qualcomm device" as before using MSM.

kimery52 said:
Thanks for your answer.
Problem is I can't use MSM as my phone is not detected anymore. It automatically boots on fastbood mode when I plug it on my computer.
View attachment 5665639
I only see the "OnePlus Android Bootloader Interface" now.
I don't see the COM port "Qualcomm device" as before using MSM.
Click to expand...
Click to collapse
Try this:
when in fastboot mode power off the device from there and wait for 10-15 seconds once powered off then, hold the volume up button for 5-10 seconds and as you are holding it, connect your device to USB, let me know if this works or not

Ok, I will try it sunday and 'll tell you.

shank1524 said:
Try this:
when in fastboot mode power off the device from there and wait for 10-15 seconds once powered off then, hold the volume up button for 5-10 seconds and as you are holding it, connect your device to USB, let me know if this works or not
Click to expand...
Click to collapse
That manipulation works as you expected.
I'm gonna try with OOS 5.1.5 and will tell you.

kimery52 said:
That manipulation works as you expected.
I'm gonna try with OOS 5.1.5 and will tell you.
Click to expand...
Click to collapse
that's cool! I hope it works.

Hum.. doesn't seem to work...
Tried with enchilada_22_O.09_180517 ROM but when it completes the download, it just boots with the OnePlus logo (photo) then keeps black with the cyan LED light.
Is there a way for me to diagnose what's wrong ?

kimery52 said:
Hum.. doesn't seem to work...
Tried with enchilada_22_O.09_180517 ROM but when it completes the download, it just boots with the OnePlus logo (photo) then keeps black with the cyan LED light.
View attachment 5667693
Is there a way for me to diagnose what's wrong ?
Click to expand...
Click to collapse
you know, this usually happens with me but not on this screen, you know the screen where it says "bootloader unlocked"(if it's unlocked), there's one glitchy line on the screen and when that line appears that means something's wrong and then the phone crashes to crashdump mode but usually I get out of it by simply pressing power button but it seems like the crashdump problem is different for everyone, so coming back to your problem either the flashing is going wrong or something is off, seems like even the only solution is not working for you, I can only suggest you to try it again but if even that doesn't work then I don't think there's any solution left.
PS. I hope that you are putting your PC/Laptop in test mode before performing MSM operations.