Hello guys,
I need your help.
Yesterday, my phone hangged and got stuck at Qualcomm Crash Dump mode.
I was just able to enter Fastboot (Power + Volume down button) but it won't wipe date, reset to factory or enter any other mode, it would just get black and do nothing, without possibility to launch the OS.
So, I used MsmDownloadTool to reformat it with the enchilada_22_H.07_180513 ROM.
The tool succeded to download the firmware to the phone but now, when I power it on, it just go directly to fastboot and whatever I do (Start, Recovery mode, Restart bootloader), it restarts directly in fastboot mode.
The problem is my device is not unlocked (I never rooted it) so I can't use the command "fastboot oem unlock"...
Due to the use of MsmDownloadTool, I know that I won't be able to recover the data but I would like to know if there is any possibility to make the phone usable again.
Try using different versions of MSM, I used the one which had OOS 5.1.5 and it successfully booted after it showed success in MSM
Thanks for your answer.
Problem is I can't use MSM as my phone is not detected anymore. It automatically boots on fastbood mode when I plug it on my computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only see the "OnePlus Android Bootloader Interface" now.
I don't see the COM port "Qualcomm device" as before using MSM.
kimery52 said:
Thanks for your answer.
Problem is I can't use MSM as my phone is not detected anymore. It automatically boots on fastbood mode when I plug it on my computer.
View attachment 5665639
I only see the "OnePlus Android Bootloader Interface" now.
I don't see the COM port "Qualcomm device" as before using MSM.
Click to expand...
Click to collapse
Try this:
when in fastboot mode power off the device from there and wait for 10-15 seconds once powered off then, hold the volume up button for 5-10 seconds and as you are holding it, connect your device to USB, let me know if this works or not
Ok, I will try it sunday and 'll tell you.
shank1524 said:
Try this:
when in fastboot mode power off the device from there and wait for 10-15 seconds once powered off then, hold the volume up button for 5-10 seconds and as you are holding it, connect your device to USB, let me know if this works or not
Click to expand...
Click to collapse
That manipulation works as you expected.
I'm gonna try with OOS 5.1.5 and will tell you.
kimery52 said:
That manipulation works as you expected.
I'm gonna try with OOS 5.1.5 and will tell you.
Click to expand...
Click to collapse
that's cool! I hope it works.
Hum.. doesn't seem to work...
Tried with enchilada_22_O.09_180517 ROM but when it completes the download, it just boots with the OnePlus logo (photo) then keeps black with the cyan LED light.
Is there a way for me to diagnose what's wrong ?
kimery52 said:
Hum.. doesn't seem to work...
Tried with enchilada_22_O.09_180517 ROM but when it completes the download, it just boots with the OnePlus logo (photo) then keeps black with the cyan LED light.
View attachment 5667693
Is there a way for me to diagnose what's wrong ?
Click to expand...
Click to collapse
you know, this usually happens with me but not on this screen, you know the screen where it says "bootloader unlocked"(if it's unlocked), there's one glitchy line on the screen and when that line appears that means something's wrong and then the phone crashes to crashdump mode but usually I get out of it by simply pressing power button but it seems like the crashdump problem is different for everyone, so coming back to your problem either the flashing is going wrong or something is off, seems like even the only solution is not working for you, I can only suggest you to try it again but if even that doesn't work then I don't think there's any solution left.
PS. I hope that you are putting your PC/Laptop in test mode before performing MSM operations.
Related
I did flash the lollipop alpha. Realizing that there's nothing much I can do I decided to go back for CM11S. During the process I re root the phone try to flash the CM11S. And after finished flashing the phone won't boot up (even with any combination of buttons). My computer didn't pick up the phone as well. Does this mean that my One+ is bricked? Is there any solution?
Please help
My OnePlus screen never turn on after this happen to me. All the response from the phone was vibrates. Vol up/ down + power, I tried everything, but only vibrate and nothing happen after that.
If there's any help I would appreciate!!!!
Have you tried this? https://forums.oneplus.net/threads/...-solution-to-all-kinds-of-soft-bricks.142870/
Also, when you try to boot into fastboot, it does vibrate, right? Your computer should acknowledge the device is connected if that's the case.
TigerDNA said:
Also, when you try to boot into fastboot, it does vibrate, right? Your computer should acknowledge the device is connected if that's the case.
Click to expand...
Click to collapse
I have the same exact problem. My computer is acknowledged that the phone is being connected, it makes a classic windows sound of connected device into USB. But visual notification is not there as well as there is no new device displayed in the system. This just happens when I try to fastboot (power on + up button).
poisongas said:
I did flash the lollipop alpha. Realizing that there's nothing much I can do I decided to go back for CM11S. During the process I re root the phone try to flash the CM11S. And after finished flashing the phone won't boot up (even with any combination of buttons). My computer didn't pick up the phone as well. Does this mean that my One+ is bricked? Is there any solution?
Please help
My OnePlus screen never turn on after this happen to me. All the response from the phone was vibrates. Vol up/ down + power, I tried everything, but only vibrate and nothing happen after that.
If there's any help I would appreciate!!!!
Click to expand...
Click to collapse
Same here and my computer wont pick it up as a device. Ill keep tinkering/searching but if anyone has any ideas I would love to be a guinea pig.
Tidy_wave said:
I have the same exact problem. My computer is acknowledged that the phone is being connected, it makes a classic windows sound of connected device into USB. But visual notification is not there as well as there is no new device displayed in the system. This just happens when I try to fastboot (power on + up button).
Click to expand...
Click to collapse
You should still be able to push to the phone even if nothing is on the screen.
Even if it doesnt pick up the device on the computer or in cmd?
Check this post for a solution :
https://forums.oneplus.net/threads/s...us-one.104943/
start from "HERE IS THE SOLUTION"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
shadsilvs said:
Even if it doesnt pick up the device on the computer or in cmd?
Click to expand...
Click to collapse
It did pick up as this one
TheManDroid said:
Check this post for a solution :
start from "HERE IS THE SOLUTION"
Click to expand...
Click to collapse
Will give you the resolve asap. I'm following step by step finger cross!!!!!!
You need to install the right drivers so that you can use the Msm8974DownloadTool
So I last time when I flash XiaoMi Mi4i I do not know why the phone seems to to bricked.
What I mean brick is :
No respond when pressing power button.
When charging no LED light.
No Recovery (Volume + and Power)
No Fastboot (Volume - and Power)
Today I manage to read a thread tha use the following instruction to save the XiaoMi Mi4i.
1. Download the Fastboot ROM.
2. Install XiaoMi Mi Flash.
3. Restart computer and disable driver signature verify.
4. Flash like normal.
The flashing process take about 720 second, The result is successful but the phone wont turn on itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I try to unplug it and press the power button. No response at all then I plug into a wall powered charger the phone show me the Mi logo then turn off the screen with a red LED blinking again and again until I unplug the phone from the power sources. This happen also when I plug the phone into the computer via USB.
The good news is that I can now enter Fastboot mode. ( I assume that my device came back from brick) but no recovery menu. I then connect the phone in Fastboot mode to the computer via USB then flash the ROM again just like normal. The result success but the phone won't power on itself so I press the power button and nothing happen.
Then
I plug into a wall powered charger the phone show me the Mi logo then turn off the screen with a red LED blinking again and again until I unplug the phone from the power sources. This happen also when I plug the phone into the computer via USB.
Click to expand...
Click to collapse
just like a moment ago.
Anyone that can help me ?
Did you try with the other fastboot version?
faizauthar12 said:
Did you try with the other fastboot version?
Click to expand...
Click to collapse
Nope but in MIUI forum there is no one complaining about the version.
ic3tea said:
Nope but in MIUI forum there is no one complaining about the version.
Click to expand...
Click to collapse
I would suggest using a MIUI 7 fastboot ROM. And a global stable one over a developer build. I ran into problems like no wifi / mobile network once, always I tried to flash the developer fastboot ROM. But once I flash a stable ROM everything was okay. Then I could easily go back to the developer ROM.
Try this,
Version: V7.2.3.0.LXIMIDA
sharan.nyn said:
I would suggest using a MIUI 7 fastboot ROM. And a global stable one over a developer build. I ran into problems like no wifi / mobile network once, always I tried to flash the developer fastboot ROM. But once I flash a stable ROM everything was okay. Then I could easily go back to the developer ROM.
Try this,
Version: V7.2.3.0.LXIMIDA
Click to expand...
Click to collapse
Will try and update you back .
Hello,
First: i'm sorry if i don't speak perfectly english but I hope someone could help me.
I got a one and a half years old Honor 6X BLN-L21 and it is almost bricked.
A year ago I tried to unlock the bootloader, to root my phone. I did a mistake which made me want to get back to normal rom by removing TWRP.
Since this moment, I can't update my phone or relock bootloader because:
- Every reboot there is a "Your device has been unlocked and can't be trusted" message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- I can't lock my bootloader because I can't access bootloader, because it needs a reboot and I get this message every reboot
- I can't update my phone for the same reason
- I can't access to recovery because it reboots everytime I turn off my phone one second later so it makes impossible to access recovery with volume buttons + power button
So I can't put a new rom with sdcard dload folder.
I can access my phone by waiting for it to get discharged, and then powering it with usb cable, and it boots normally.
Please help me, I really want to move to android Oreo.
Thanks
You should be able to boot to fastboot.
Connect phone to pc, press power key and once its in the process of shutdown, keep pressing the volume down key.
shashank1320 said:
You should be able to boot to fastboot.
Connect phone to pc, press power key and once its in the process of shutdown, keep pressing the volume down key.
Click to expand...
Click to collapse
It didn't work, it goes to the message directly and pressing power + volume down doesn't change anything
Etyop said:
It didn't work, it goes to the message directly and pressing power + volume down doesn't change anything
Click to expand...
Click to collapse
Is your phone turning off?
shashank1320 said:
Is your phone turning off?
Click to expand...
Click to collapse
It turns off but one second later it restart on with the message
Etyop said:
It turns off but one second later it restart on with the message
Click to expand...
Click to collapse
What have you done exactly
shashank1320 said:
What have you done exactly
Click to expand...
Click to collapse
Power button to the shutdown, and then volume down, but it doesn't have the time because whatever i do, it restarts automatically as fast as possible
EDIT: I didn't understood why, but fastboot worked suddenly. I relocked my bootloader but I can't update my phone. Stuck in EMUI 5.1 because when I update eRecovery says my data partition is highly damaged and need to format. I did 2 formats but the eRecovery still blocks update with the same message.
Have you seen my guide before?6X
player615 said:
Have you seen my guide before?6X
Click to expand...
Click to collapse
Well, I'm not sure I want to open my phone just to update it. I want to update it, but I mean, isn't it risky to open ?
Why did you relock the boot loader tho. Unlock it and then follow Shashanks Guide. Works perfectly.
After installing TB-J606F_S320029_210923_ROW with QFIL on a 128gb 6gb from china, you are now in bootloop.
I have tried flashing other firmwares but the same thing happens.
Any solution?
Thanks
Try change active slot via fastboot.
fastboot set_active other
I tried that and it says
FAILED (remote: 'Slot Change is not allowed in Lock State
')
fastboot: error: Command failed
Other solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You have something broken. Look at your serial number. That can't be right. Seems, it lost.
Try flash other version.
d1m-ON said:
You have something broken. Look at your serial number. That can't be right. Seems, it lost.
Try flash other version.
Click to expand...
Click to collapse
thanks.
I try to enter Qualcomm HS-USB Diagnostics 901D mode but it always enters Qualcomm HS-USB Diagnostics 900E.
I press the power button + volume button + and connect the cable, I hope the lenovo screen is removed and when the charging icon comes out I loose buttons. it is right?
For HS-USB Diagnostics 901D mode you need press Power and Volume+ together, cable no needed.
Display turned on, count 4-5 sec and release Power button, holding Vol+. And you will see FFBM on grey color. Thats is.
d1m-ON said:
For HS-USB Diagnostics 901D mode you need press Power and Volume+ together, cable no needed.
Display turned on, count 4-5 sec and release Power button, holding Vol+. And you will see FFBM on grey color. Thats is.
Click to expand...
Click to collapse
Keep entering 900E with its instructions and nothing comes out of FFBM on the tablet
What else can I do?
xXxmontexXx said:
Keep entering 900E with its instructions and nothing comes out of FFBM on the tablet
What else can I do?
Click to expand...
Click to collapse
Where did you purchase?
mardon85 said:
Where did you purchase?
Click to expand...
Click to collapse
China, aliexpress
This https://m.es.aliexpress.com/item/10...&terminal_id=601124cee81c499b9bb278d7f9a0997e
xXxmontexXx said:
China, aliexpress
This https://m.es.aliexpress.com/item/10...&terminal_id=601124cee81c499b9bb278d7f9a0997e
Click to expand...
Click to collapse
Ah I had a similar issue and had to send mine back to China for flashing.
Try and locate a Zui13 ROM for fresh flashing via QFIL.
I don't think you can flash back to ZUI12 as it also triggers this stupid region lock boot loop.
Me too, bootloop after flash rom global, help me (
$ fastboot set_active a
did the trick for me!
Amatöhr said:
$ fastboot set_active a
did the trick for me!
Click to expand...
Click to collapse
Failed : Slot change is not allowed in lock state
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was figuratively about to load lineage os in twrp when my gf asked me to give her mate a lift. so i left phone on thinking nothing of it then came home to this... there was almost some domestic abuse...lol
you cannot boot into download mode anymore?
I'm bricked too but it's very much worse than that I have completely black screen. But phone still responds to the Computer in device manager. Comes up with MediaTek driver. I have libusb installed. Not sure what to do. I have the A125U model.
LR7875 said:
you cannot boot into download mode anymore?
Click to expand...
Click to collapse
no doesnt respond to buttons at all, boots up then samsung then that screen. i might have to take it apart, i have the tools.
YerBallix said:
no doesnt respond to buttons at all, boots up then samsung then that screen. i might have to take it apart, i have the tools.
Click to expand...
Click to collapse
usb bugging isnt on so cant flash stock rom or anything
YerBallix said:
usb bugging isnt on so cant flash stock rom or anything
Click to expand...
Click to collapse
FIXED GOT INTO DL MODE, loading stock rom, phone in prenormal state now though better than brick
YerBallix said:
no doesnt respond to buttons at all, boots up then samsung then that screen. i might have to take it apart, i have the tools.
Click to expand...
Click to collapse
was trying to enter dl mode with power on, don't laugh im new to this
YerBallix said:
FIXED GOT INTO DL MODE, loading stock rom, phone in prenormal state now though better than brick
Click to expand...
Click to collapse
so you can now boot into android? you can do not turn off device and connect to internet for 7 days for the rmm to turn normal
I still haven't figured out how to get mine out of bprom mode
LR7875 said:
so you can now boot into android? you can do not turn off device and connect to internet for 7 days for the rmm to turn normal
Click to expand...
Click to collapse
I was able to get out of prenormal instantly, but I have a google
YerBallix said:
I was able to get out of prenormal instantly, but I have a secure google
Click to expand...
Click to collapse
You bought it 2nd hand? Can you delete your Google account from your phone?
Yr phone should (always) be able to enter download mode.
Just press power + vol down with USB (connected to PC) and turn of, then power + vol up untill download mode starts.
As said, it'll always start download mode.
There you can just flash repair Firmware in ODIN and get it back to "pre"normal working state.
edward0181 said:
Yr phone should (always) be able to enter download mode.
Just press power + vol down with USB (connected to PC) and turn of, then power + vol up untill download mode starts.
As said, it'll always start download mode.
There you can just flash repair Firmware in ODIN and get it back to "pre"normal working state.
Click to expand...
Click to collapse
No download mode. It's currupt or something. Stays in vcom no matter what I flash successfully. Verified boot is enabled. I'm not sure what I'm doing wrong. I've always flashed my mediatek devices successfully eventually but they never actually flash if you know what I mean. Flashing the preloader doesn't give me download mode back.