Related
Maybe this should be a dummy question, sorry
I'm going to install cyanogenmod on my devices, and i use it for test and run some apps i wrote (all wrote and tested under stock device).
Can i find some problems if i run it under cyanogenmod?
And if i change kernel, something could change?
thanks.
giozh said:
Maybe this should be a dummy question, sorry
I'm going to install cyanogenmod on my devices, and i use it for test and run some apps i wrote (all wrote and tested under stock device).
Can i find some problems if i run it under cyanogenmod?
And if i change kernel, something could change?
thanks.
Click to expand...
Click to collapse
if you change kernels, everything could change(or nothing could change). and you could have problems with cm where you dont get problems with another rom. the possibility exists.
simms22 said:
if you change kernels, everything could change(or nothing could change). and you could have problems with cm where you dont get problems with another rom. the possibility exists.
Click to expand...
Click to collapse
Ok. But if i change only rom (no kernel), apps developped for the stock rom, will run under cyanogen ?
giozh said:
Ok. But if i change only rom (no kernel), apps developped for the stock rom, will run under cyanogen ?
Click to expand...
Click to collapse
most will no problem. if you do run into issues, youll have to figure them out. cm and stock do differ enough.
so, if i want write apps to put on play store, i need to work under stock?
giozh said:
so, if i want write apps to put on play store, i need to work under stock?
Click to expand...
Click to collapse
its better for a larger audience since more people use stock than cm.
Hi all,
Did anyone able to use gps with custom rom ( I would say CM base). I research and try everything that's I could find here but not success.
Every time I do clean wipe everything including a internal storage. So that will nothing left behind.
I know that stock is work fine with gps. some said that install and replace stock but I have no idea that what file will left in our device when we delete all.
Always had the same problem when running Paranoid Android (not tried other ROMs). Had to return to stock, where GPS runs fine. Would also love to kknow how people have got it functioning.
I am trying too. I modified gps.conf files, tried some workarounds mentioned in cm11 thread like restoring GPS Status backup from stock with titanium so far with no success. Some people say that it works but it doesn't on mine whatever I do.
I run on CM and I don't have any problem. Everything works fine with gps and I didn't use any fix or something similar.
I'm on CM 11-20140627 and I have 1032 phone.
Interesting, why does it work on some while it doesn't on others? Maybe some variants are having problems...
I have xt1033 asia version.
spajdo said:
I run on CM and I don't have any problem. Everything works fine with gps and I didn't use any fix or something similar.
I'm on CM 11-20140627 and I have 1032 phone.
Click to expand...
Click to collapse
Which recovery did you use?
CWM
As I wonder is about library missing or some partition need from stock ?
I've also been using the micro gapps package, would this matter?
I had problems with Paranoid Android and GPS too... If anyone know something about that, please comment!
TMaxtor said:
I had problems with Paranoid Android and GPS too... If anyone know something about that, please comment!
Click to expand...
Click to collapse
Hey i found a solution, you have do this flash following in this order.
- flash stock 4.4.4 (depend on your current)
- flash cm
- flash gapp
I try this twice and work like a charm.
Sent from my Moto G using XDA Free mobile app
thestory101 said:
Hey i found a solution, you have do this flash following in this order.
- flash stock 4.4.4 (depend on your current)
- flash cm
- flash gapp
I try this twice and work like a charm.
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
I am having he same problem on XT1032 running Carbon ROM. GPS worked fine on stock, no signal with Carbon.
I found many answers saying to flash stock and then reflash custom ROM. I will try it, but I wonder, how does this help? Isn't the phone restoring the whole system? Do I have to keep the gps.conf from stock?
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
am05 said:
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
Click to expand...
Click to collapse
Did you wipe anything, like Dalvik, Cache and Data, or you just flashed it over?
am05 said:
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
Click to expand...
Click to collapse
Sorry people, I was so happy to have my phone back working, I forgot to write it back here.
Yes it worked indeed, all I did was flashing back the stock, going outside to have a gps lock with gmaps, then re-flashing back the Carbon. I also kept a copy of the gps.conf, but I never needed it, the GPS got a fix quickly. Working fine so far, it only takes some tens of seconds to fix, from time to time.
I can't remember if I also did all the wiping, I think I didn't, but I made so many trials in a couple days, I am not sure.
Thanks a lot guys!
am05 said:
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
Click to expand...
Click to collapse
Yes, this worked for me too on PA.
I couldn't even see a single sat (it wasn't just a lock problem). No matter with gps patch, gpx fix app, or gps.conf I used.
What I did?: Back to stock, lock GPS, flash again the custom ROM (but don't wipe /system!).
Good luck on that guys, it should work for you too.
thestory101 said:
Hi all,
Did anyone able to use gps with custom rom ( I would say CM base). I research and try everything that's I could find here but not success.
Every time I do clean wipe everything including a internal storage. So that will nothing left behind.
I know that stock is work fine with gps. some said that install and replace stock but I have no idea that what file will left in our device when we delete all.
Click to expand...
Click to collapse
GPS works fine on this unofficial CM11 rom for me. Stable daily driver rom for me, YMMV.
General advice is to:
- make sure you get a GPS lock on stock rom first
- flash CM11 (or other custom rom)
There may not be a file left on the device. it may just be that stock contains the code to initialize the GPS functionality on the SoC or chipset firmware. Whatever, it works...
Hello.
My problem is that sometimes, when I receive a notification, ambient display turns screen on to show it (as it should do normally), but then, when it is supposed to turn screen off again, it only goes black, but the backlight is still on. It's hard to notice, but I don't want the backlight on, using battery, when I think it's off.
The only way to turn it off is by activating ambient display again (moving the phone, waving in front of proximity sensor, pressing power button), and then it would show my normal lock screen and then turn off, until "something" makes it leave the backlight on again.
Anyone have/had/knows this issue? I've used Mokee ROM, now I'm on RR and it happened on both, I don't remember if it happened in CM. Could it be something app related?
Thanks.
Yeah same happened with cm 12.1 latest nightly too.....just checked it now...
The Answer
Hi there !
When you have installed the custom rom, you have probably flashed directly from another custom rom , is this correct?
If so, it may be your phones drivers slightly messed up at the moment seeing as it has different parts from other roms, depending on how you flashed it.
My solution would be to flash the stock firmware , which can easily be found in the forums, and then flash twrp, then your rom of choice. If that doesn't work, its likely a bug in that specific build of the rom you are installing , seeing as another person who has replied has had the same problem .
therealduff1 said:
Hi there !
When you have installed the custom rom, you have probably flashed directly from another custom rom , is this correct?
If so, it may be your phones drivers slightly messed up at the moment seeing as it has different parts from other roms, depending on how you flashed it.
My solution would be to flash the stock firmware , which can easily be found in the forums, and then flash twrp, then your rom of choice. If that doesn't work, its likely a bug in that specific build of the rom you are installing , seeing as another person who has replied has had the same problem .
Click to expand...
Click to collapse
That's strange! I guess it may be something like the drivers you said, because just one user said that have the same problem, but I'll have to wait until I have some free time to flash stock and root and flash CM and restore all apps and that again... I hate that part of installing another ROM.
therealduff1 said:
Hi there !
When you have installed the custom rom, you have probably flashed directly from another custom rom , is this correct?
If so, it may be your phones drivers slightly messed up at the moment seeing as it has different parts from other roms, depending on how you flashed it.
My solution would be to flash the stock firmware , which can easily be found in the forums, and then flash twrp, then your rom of choice. If that doesn't work, its likely a bug in that specific build of the rom you are installing , seeing as another person who has replied has had the same problem .
Click to expand...
Click to collapse
I flashed stock using fastboot and then RR but the problem persists... Any other ideas??
Secuential said:
I flashed stock using fastboot and then RR but the problem persists... Any other ideas??
Click to expand...
Click to collapse
Ok, I have spent some time thinking about this one for you, as I really want you to get this one fixed!
Although I need abit more information.
1) Does the issue occur on stock rom?
2)Are you sure it is not a problem with the build you are running?
3)What exact steps did you use to flash the rom?
To show that you appreciate my help so far, please click thanks
therealduff1 said:
Ok, I have spent some time thinking about this one for you, as I really want you to get this one fixed!
Although I need abit more information.
1) Does the issue occur on stock rom?
2)Are you sure it is not a problem with the build you are running?
3)What exact steps did you use to flash the rom?
To show that you appreciate my help so far, please click thanks
Click to expand...
Click to collapse
Thanks!
1)I can't tell if it occurs on stock, because on stock I use moto display (which doesn't have this issue).
2) I'm almost sure, because I've used 2 ROMs and both do the same. Maybe I'll have to try with CM nightlies?
3)I followed the guide in "general" section to flash stock using fastboot and android sdk. After that, I booted on stock, then rebooted to bootloader, flashed TWRP, entered to recovery, wiped data and then flashed RR ROM with it's gapps and then flashed moto camera and gallery. After that, wipe dalvik and cache and rebooted to system.
Right , ok. I recommend trying one of the cm12 nightly builds, seeing as they worked on my phone fine in terms of ambient display
therealduff1 said:
Right , ok. I recommend trying one of the cm12 nightly builds, seeing as they worked on my phone fine in terms of ambient display
Click to expand...
Click to collapse
Well, the other user that commented on this post was also using latest CM nightly, so I'm not very positive about it, but I may try it when I have time.
Well , looking at all of the information In this post , I think it is safe to say ambient display is not fully working on many roms :/
I installed a new build of cm12 earlier, and I found that sometimes the backlight will stay on , but other times it is fine.
If you want to work on this together, email me at [email protected] , and then we can look into it abit further ?
I will take a thorough look into the forums to see if others are recieving any problems as well .
therealduff1 said:
Well , looking at all of the information In this post , I think it is safe to say ambient display is not fully working on many roms :/
I installed a new build of cm12 earlier, and I found that sometimes the backlight will stay on , but other times it is fine.
If you want to work on this together, email me at [email protected] , and then we can look into it abit further ?
I will take a thorough look into the forums to see if others are recieving any problems as well .
Click to expand...
Click to collapse
Thanks! I have a lot of work right now, so I can't work with this now, but I'll email you when I have more free time!
After the first time I flashed my phone I could never make GPS work again, and the GPS signal was already weak before flashing.
Now I've flashed it again and when testing with GPS TEST app, it said the GPS was ON, so I left the phone running the application the whole night, when I woke up, and it still couldn't get a lock.
Have already followed the procedure of using engineering mode to download EPO and use the AGPS thing, the network doesn't seem to be helping at all, it finds the satellites, but the lock won't work. I've even opened my phone and enhanced the GPS antenna by soldering a copper wire followed by an aluminium (Isolated with electric tape), I know this method improves the signal because I've done that with the WiFi and SIM antennas, the signals were improved by 65%, but the GPS? No can do.
I suspect the phone isn't recognizing the GPS hardware, that I still have to do something else, like installing a "driver" or something. I not even get a weak signal, nothing, it's like my phone's GPS hardware never existed. Get it? I got a feeling that the phone isn't recognizing the GPS hardware.
Another question, does the BT (Bluetooth) code in SN Write software has something to do with it? Because after flashing the phone, it is necessary to configure the IMEI and BT.
matheussousuke said:
After the first time I flashed my phone I could never make GPS work again, and the GPS signal was already weak before flashing.
Now I've flashed it again and when testing with GPS TEST app, it said the GPS was ON, so I left the phone running the application the whole night, when I woke up, and it still couldn't get a lock.
Have already followed the procedure of using engineering mode to download EPO and use the AGPS thing, the network doesn't seem to be helping at all, it finds the satellites, but the lock won't work. I've even opened my phone and enhanced the GPS antenna by soldering a copper wire followed by an aluminium (Isolated with electric tape), I know this method improves the signal because I've done that with the WiFi and SIM antennas, the signals were improved by 65%, but the GPS? No can do.
I suspect the phone isn't recognizing the GPS hardware, that I still have to do something else, like installing a "driver" or something. I not even get a weak signal, nothing, it's like my phone's GPS hardware never existed. Get it? I got a feeling that the phone isn't recognizing the GPS hardware.
Another question, does the BT (Bluetooth) code in SN Write software has something to do with it? Because after flashing the phone, it is necessary to configure the IMEI and BT.
Click to expand...
Click to collapse
What did you flash your phone with exactly ? Most ROMs released recently have GPS and VPN bugs.
[email protected] said:
What did you flash your phone with exactly ? Most ROMs released recently have GPS and VPN bugs.
Click to expand...
Click to collapse
Original Stock Rom found at Doogee blog. Also tried the upgraded version, found in the same site. Only the upgraded version works well, the older one has a bug in the video.
I tried all the steps cited before, so would that be a problem with the ROMS?
Then what do you think about custom roms? I found some here, I'm willing to try them:
http://www.mtkroms.com/p/mtk-6572-custom-roms.html
matheussousuke said:
Original Stock Rom found at Doogee blog. Also tried the upgraded version, found in the same site. Only the upgraded version works well, the older one has a bug in the video.
I tried all the steps cited before, so would that be a problem with the ROMS?
Then what do you think about custom roms? I found some here, I'm willing to try them:
http://www.mtkroms.com/p/mtk-6572-custom-roms.html
Click to expand...
Click to collapse
Custom ROMs are better just read known issues or bug list before flashing custom ROMs though.all the best.
Oops, the site mtkroms have only general ROMs if you flash you'll get bootloop unless you port the downloaded ROM for your phone
[email protected] said:
Custom ROMs are better just read known issues or bug list before flashing custom ROMs though.all the best.
Oops, the site mtkroms have only general ROMs if you flash you'll get bootloop unless you port the downloaded ROM for your phone
Click to expand...
Click to collapse
Thx, I noticed that rom port part. Well, where can I find custom mtk roms?
matheussousuke said:
Thx, I noticed that rom port part. Well, where can I find custom mtk roms?
Click to expand...
Click to collapse
Don't search for your chipset roms search for your phone or you'll brick it.
[email protected] said:
Don't search for your chipset roms search for your phone or you'll brick it.
Click to expand...
Click to collapse
Not true at all. See here: http://forum.xda-developers.com/showthread.php?t=2526106 I have this phone, have ported and used every single mtk6572 rom available, none of them enable GPS at all, this chipset is useless for that.
Any roms you need or want, jb4.2, then let me know. I'll either have it already or will quicly port it for you, but that is such an easy thing to do anyway: http://computerplusandroid.blogspot.com/2015/09/mtk-porting-guide-for-jellybean-same-soc.html
Find an mtk6572 rom you like, port it as described above, then flash it. NONE of them have GPS working well, I've tried so, so many. Just find one you like the look of. Mediamod v5 is a good one, and lollifox also.
http://the-daffi.blogspot.co.uk/ good list of roms, its in Indonesian but just download the links based on screenshots simple way is download it, unzip it, swap the boot.img from your working rom into the rom folder you just unzipped, copying over it. Then highlight SYSTEM, METAINF and BOOT.IMG with the mouse, and zip it back up as a .zip. Then flash that. If that boots and you like the look of it, then properly port it, all the .lib files, all etc files and things to make it work well.
robneymcplum said:
Not true at all. See here: http://forum.xda-developers.com/showthread.php?t=2526106 I have this phone, have ported and used every single mtk6572 rom available, none of them enable GPS at all, this chipset is useless for that.
Any roms you need or want, jb4.2, then let me know. I'll either have it already or will quicly port it for you, but that is such an easy thing to do anyway: http://computerplusandroid.blogspot.com/2015/09/mtk-porting-guide-for-jellybean-same-soc.html
Find an mtk6572 rom you like, port it as described above, then flash it. NONE of them have GPS working well, I've tried so, so many. Just find one you like the look of. Mediamod v5 is a good one, and lollifox also.
http://the-daffi.blogspot.co.uk/ good list of roms, its in Indonesian but just download the links based on screenshots simple way is download it, unzip it, swap the boot.img from your working rom into the rom folder you just unzipped, copying over it. Then highlight SYSTEM, METAINF and BOOT.IMG with the mouse, and zip it back up as a .zip. Then flash that. If that boots and you like the look of it, then properly port it, all the .lib files, all etc files and things to make it work well.
Click to expand...
Click to collapse
What I meant was downloading a ROM developed for chipset say 6582 and then flashing right away would result in install failure or a bootloop etc.. So I just told him to search for one that's already ported for his phone.
I know downloading ROM from mtkroms and replacing some files ,decompiling boot.IMG etc are easy but most I guys talked this to didn't wanna go through all that hassle.
And about GPS some ROMs I tried GPS works others didn't so I thought flashing another would work I admit I'm not that knowledgeable ,was trying to help sorry.
you can port 6582/9280 to 6572 as well, its just harder. I have/had this phone and then bought one for my son, his was brand new, untouched and GPS didnt work even then
robneymcplum said:
you can port 6582/9280 to 6572 as well, its just harder. I have/had this phone and then bought one for my son, his was brand new, untouched and GPS didnt work even then
Click to expand...
Click to collapse
I use lenovo a5000 GPS works fine on kk/lp based ROMs but not on marsh based ROMs cuz it was a bug that came at the time of compiling forms source .
But you guy's problem sound more like a hardware
Defect in the phone than the ROMs. Best contact your phones customer care if they're still alive . unbelievable how a company can mess up on a vital component of phone like GPS.
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Thx fellas.
@robneymcplum Please, if you can port the ROM for me, I'll be very thank you. I've read the ROM porting tutorial, but didn't understand the last parts, stuff like de-compiling and compiling the boot.img.
@[email protected] They're more alive than ever, and still manufacturing those things....
robneymcplum said:
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Click to expand...
Click to collapse
By the way, I made it work once, I was at a high place and I could get my location using Sygic.
This phone has 7 antennas, where 4 antennas are the GND (Ground) part of each receptor.
You have to build a custom antenna for each one of them, soldering a small piece of iron or aluminum solves that problem. By using this method I was able to improve the wifi and SIM signals a lot. The only problem is that you have to very careful not to unsold the antennas of the board.
So following that logic, I conclude that the GPS not getting a lock is definitely a Hardware issue, I also forgot to mention that I went to an open space to get the signal. I can't get a lock on a single satellite, it is very frustrating, definitely not buying from those guys ever again.
Beside the GPS not working, this phone's touch screen is average, this phone's camera is horrible, this phone's internal memory for both applications and storage is terrible, this phone speaker is low, the headsets are annoying (They hurt your ear after using them sometime), the hardware isn't that great (Dual core with 512 RAM), so after seeing all the trouble I've got into, I should have bought a galaxy s4 by the time I bought that one, I had even sold my galaxy s3, thought I was saving, when I reflect about all the feature I've "lost" when I decided to save money, and it isn't a big difference between this phone's price and a galaxy s4.
robneymcplum said:
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Click to expand...
Click to collapse
I've only seen now that you've mentioned the country part.
I've been searching all day long and I found out that there is a way to not only download the country based gps.config file, but also use GLONASS (A russian supported GPS version like thing).
Also saw people saying they've last their GPS after Jelly Bean Upgrade.
Just flashed a newer rom that I've found here, still no luck. Now Loading....
PS: If it works fine in China, then there is a hope....
robneymcplum said:
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Click to expand...
Click to collapse
Lenovo ***ed up with our update for lollipop overheating ,battery drain etc so the guys at 4pda filed a petition so lenovo would release the source code and they did.
And the lads also have released custom kernel 3.4.67 and 3.10.54. I could only find recovery development in 4pda for your phone though.
[email protected] said:
Lenovo ***ed up with our update for lollipop overheating ,battery drain etc so the guys at 4pda filed a petition so lenovo would release the source code and they did.
And the lads also have released custom kernel 3.4.67 and 3.10.54. I could only find recovery development in 4pda for your phone though.
Click to expand...
Click to collapse
Just replaced the gps.config with one from my country. No can do.
It seems to be a problem related to that version of jelly bean.
https://drive.google.com/open?id=0B_A_RDn2fPEwNkhONW1CSVZ4OFk
This is the rom I'm using, seems to be the best for looks vs performance for all the ones Ive found, BACK UP your rom first in CWM just to be sure. Porting is easy, you dont need to recompile boot.img, just copy/paste your boot.img from the rom you are using now into the rom you have downloaded, is really easy. This rom here, 'should' work fine, but if it wont boot then its a boot image issue, simply unzip this rom, copy over your current boot.img and then rezip it back up. Dead easy I then change build.prop screen density to 190 if it isnt already, developer settings and change all the animations/windows to the lowest settings, I use nova launcher as I prefer it.
I then use xposed with holothemer to theme the settings to android L
gravitybox for the usual tweaks
bootmanager to stop various things from starting
and what ever else you need, with greenify and google play services removed, I have a resting RAM of 130/150 free with 2 day battery life.
robneymcplum said:
https://drive.google.com/open?id=0B_A_RDn2fPEwNkhONW1CSVZ4OFk
This is the rom I'm using, seems to be the best for looks vs performance for all the ones Ive found, BACK UP your rom first in CWM just to be sure. Porting is easy, you dont need to recompile boot.img, just copy/paste your boot.img from the rom you are using now into the rom you have downloaded, is really easy. This rom here, 'should' work fine, but if it wont boot then its a boot image issue, simply unzip this rom, copy over your current boot.img and then rezip it back up. Dead easy I then change build.prop screen density to 190 if it isnt already, developer settings and change all the animations/windows to the lowest settings, I use nova launcher as I prefer it.
I then use xposed with holothemer to theme the settings to android L
gravitybox for the usual tweaks
bootmanager to stop various things from starting
and what ever else you need, with greenify and google play services removed, I have a resting RAM of 130/150 free with 2 day battery life.
Click to expand...
Click to collapse
Thx, I'll make sure to try it. Sorry for not having answered before, this site didn't show me there were new replies here. I decided to come to inform you guys that I found out why the GPS issue is happening. It's a NVRAM bug, I'm 99% sure. I've seen people saying they lost GPS feature after they flashed their phones and it was because of VRAM.
You can check it out here: http://www.chinaphonearena.com/forum/Thread-iNew-v3-NVRAM-download-backup-restore-tar-bin-files
I already had suspected before if it was the VRAM because the first thing you see on the phone after flashing is a ERROR VRAM in wifi networks. I wondered if that was the case, but until yesterday I couldn't find anything related to that, a few hours ago I found. Too bad I screwed with my AGPS, GPS and EPO files replacing files from stock rom. I guess I'll have to flash it again. Right now I'm looking for a NVRAM file. Man, you have no clue how I prayed to fix this thing., I was about to buy phone, not a Chinese one though (Not going to make that mistake again in my life... ever). lol
robneymcplum said:
https://drive.google.com/open?id=0B_A_RDn2fPEwNkhONW1CSVZ4OFk
This is the rom I'm using, seems to be the best for looks vs performance for all the ones Ive found, BACK UP your rom first in CWM just to be sure. Porting is easy, you dont need to recompile boot.img, just copy/paste your boot.img from the rom you are using now into the rom you have downloaded, is really easy. This rom here, 'should' work fine, but if it wont boot then its a boot image issue, simply unzip this rom, copy over your current boot.img and then rezip it back up. Dead easy I then change build.prop screen density to 190 if it isnt already, developer settings and change all the animations/windows to the lowest settings, I use nova launcher as I prefer it.
I then use xposed with holothemer to theme the settings to android L
gravitybox for the usual tweaks
bootmanager to stop various things from starting
and what ever else you need, with greenify and google play services removed, I have a resting RAM of 130/150 free with 2 day battery life.
Click to expand...
Click to collapse
About the rom you provided: What files should I port into the boot.img? All the files from current rom boot.img or some specific files?
PS: Is that ROM bugless?
matheussousuke said:
About the rom you provided: What files should I port into the boot.img? All the files from current rom boot.img or some specific files?
PS: Is that ROM bugless?
Click to expand...
Click to collapse
Apart from the GPS rom is faultless. Do this ONLY if it wont boot, it should work straight away though.
Dont need to add/remove anything from the boot.img, copy it as a whole file.
A month ago my mobile data stopped working, it has signal but no internet, I tried the SIM card on another phone and it worked, since then I tried multiple firmwares and roms, two A11 roms and 3 A12 roms, nothing works, it only works on MIUI 13, but I hate it, I can't even root and restore my apps, has anyone faced this problem? I need some help
Ghennon said:
A month ago my mobile data stopped working, it has signal but no internet, I tried the SIM card on another phone and it worked, since then I tried multiple firmwares and roms, two A11 roms and 3 A12 roms, nothing works, it only works on MIUI 13, but I hate it, I can't even root and restore my apps, has anyone faced this problem? I need some help
Click to expand...
Click to collapse
Maybe you have installed recovery roms in this case use Miflash with full roms (TGZ).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
Maybe you have installed recovery roms in this case use Miflash with full roms (TGZ).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
I did, and mobile data works perfectly, the problem is that I don't want to use MIUI, but I can't get mobile data to work in any ROM besides MIUI.
Ghennon said:
I did, and mobile data works perfectly, the problem is that I don't want to use MIUI, but I can't get mobile data to work in any ROM besides MIUI.
Click to expand...
Click to collapse
So you are talking about AOSP roms, if so check that you have flashed the correct firmware.
And post this problem on the thread of these roms, would you be the only one?
NOSS8 said:
So you are talking about AOSP roms, if so check that you have flashed the correct firmware.
And post this problem on the thread of these roms, would you be the only one?
Click to expand...
Click to collapse
I tried multiple roms and firmwares, always have the same problem
As I said in the first post, I tried two A12 roms and three A11 roms, Arrow, CrDroid, PixelOS, PixelOS Plus, each one while flashing the correct firmware recommend by the dev, but I had no luck. I need to find out why it only works on miui, this thread is my last resort lol
I even tried flashing miui full rom instead of just the firmware, as it's working on it, but no matter which aosp rom I flash afterwards, it stops working.
Ghennon said:
I tried multiple roms and firmwares, always have the same problem
As I said in the first post, I tried two A12 roms and three A11 roms, Arrow, CrDroid, PixelOS, PixelOS Plus, each one while flashing the correct firmware recommend by the dev, but I had no luck. I need to find out why it only works on miui, this thread is my last resort lol
I even tried flashing miui full rom instead of just the firmware, as it's working on it, but no matter which aosp rom I flash afterwards, it stops working.
Click to expand...
Click to collapse
It seems to me that on the AOSP roms there is a multiple choice for the network from 2g to 4g lte have you tried in 2g, 3g.
If no one has posted this problem it seems strange.
A stupid question, is your phone unlocked to all operators?
Can you post the phone version?
ex:M2007J20CG, M2007J20CT.