Related
hi all.
like so many others, Xiaomi forced update 6.1.14 on to my phone which locked the bootloader. i even thought i had stopped the phone from auto updating, but it seems i was wrong. since then, i have been put on to the latest 2 updates. i want to get off of the rom i am on but cant do anything now with the phone in the installing rom dept because regardless of whether i try to use the 'Updater' to put a Chinese dev rom on the phone or any other rom, or if i rename a rom and put it on the root of the phone, i cannot update. i always get a message saying Unable to verify rom and the phone simply stops. when trying to go into recovery mode, as i am unable to get to TWRP, i have even been locked out of that. i applied for an unlock code, but haven't received anything and with Chinese New Year fast approaching, bringing a holiday, i can see Xiaomu ignoring those who asked for a code even longer than they have. i haven't read of a single person being sent the code at all, which is very bad on Xiaomi's part.
i was really pleased with this phone. it worked well for me and did all i wanted but now i have a door stop, to all intents and purpose. such a shame as the way things have gone, i wont be buying from them again.
does anyone have any solution to this problem?
many TIA,
Prettygrim
Download stable ROM - http://bigota.d.miui.com/V7.0.16.0.LXKCNCI/miui_MI4c_V7.0.16.0.LXKCNCI_cba5b6c4a8_5.1.zip
Update your phone to that ROM
You will lost all data and setting (/sdcard is safe)
Bootloader unlocked
Flash CM13
cowithgun said:
Download stable ROM - http://bigota.d.miui.com/V7.0.16.0.LXKCNCI/miui_MI4c_V7.0.16.0.LXKCNCI_cba5b6c4a8_5.1.zip
Update your phone to that ROM
You will lost all data and setting (/sdcard is safe)
Bootloader unlocked
Flash CM13
Click to expand...
Click to collapse
And stay away from dev ROMs unless you have an unlock code.
hi and tnx for the replies.
to cowithgun:
unfortunately, i cannot update to that or any other rom, as i stated above. trying to do so via the 'Updater' and all i get is 'Unable to verify rom', that is after being told i must connect to the WLAN. the speed of that is almost non-existent.
if i try to do so by putting the rom in the root of the drive, renaming it 'update.zip' i again get told 'unable to verify rom'. because of the failure to be able to do anything 'conventional' was the reason i asked for help. i have even tried Kingroot and Kingoroot but both have failed.
to qtotter:
one of the methods i was asked to try was to try to use a Chinese dev rom, but i cant even get one of those on the phone (my wife is Chinese, so no language issues).
with the upcoming Chinese New Year, i can see Xiaomi using that as an excuse to delay giving out unlock codes, if it intends doing so at all. i am extremely p****d off at what they have done and in my case, they have turned a phone that i really liked into half a phone. such i stupid stunt to pull when the 'unlocked' was a feature used to actually make the phone a more attractive sale. really disappointed
should have asked guys, what method would you suggest i try to get this rom, (if the blasted phone doesn't give me the same message as before about cant verify it) installed on the phone? bear in mind i have no official recovery and obviously no TWRP.
TIA
Prettygrim said:
hi and tnx for the replies.
to cowithgun:
unfortunately, i cannot update to that or any other rom, as i stated above. trying to do so via the 'Updater' and all i get is 'Unable to verify rom', that is after being told i must connect to the WLAN. the speed of that is almost non-existent.
if i try to do so by putting the rom in the root of the drive, renaming it 'update.zip' i again get told 'unable to verify rom'. because of the failure to be able to do anything 'conventional' was the reason i asked for help. i have even tried Kingroot and Kingoroot but both have failed.
to qtotter:
one of the methods i was asked to try was to try to use a Chinese dev rom, but i cant even get one of those on the phone (my wife is Chinese, so no language issues).
with the upcoming Chinese New Year, i can see Xiaomi using that as an excuse to delay giving out unlock codes, if it intends doing so at all. i am extremely p****d off at what they have done and in my case, they have turned a phone that i really liked into half a phone. such i stupid stunt to pull when the 'unlocked' was a feature used to actually make the phone a more attractive sale. really disappointed
should have asked guys, what method would you suggest i try to get this rom, (if the blasted phone doesn't give me the same message as before about cant verify it) installed on the phone? bear in mind i have no official recovery and obviously no TWRP.
TIA
Click to expand...
Click to collapse
I tested it myself, it should work. More precisely, I did this:
1. Download this into your computer: http://bigota.d.miui.com/V7.0.16.0.LXKCNCI/miui_MI4c_V7.0.16.0.LXKCNCI_cba5b6c4a8_5.1.zip
2. Connect phone to computer via USB, copy the zip into your phone, say /sdcard/downloaded_rom/miui_MI4c_V7.0.16.0.LXKCNCI_cba5b6c4a8_5.1.zip
3. Start Updater, press the "..." on upper right and select "Choose update package", select the ROM.
4. Installing older developer ROM will causes the error you mentioned, but if you have 6.1.14, installing stable 7.0.16 is OK and tested working. Not sure what is changed but if it still wont work, try the latest 7.1.6 stable instead.
5. It will warn you of losing setting. Please YES.
6. When it's done, you will have a MIUI ROM but bootloader no longer lock.
7. Install CM13 as soon as you can!
Sounds like the problem is your recovery. You said you have no official recovery.
Sent from my Mi-4c using Tapatalk
just tried it and no luck, i'm afraid. still getting the message 'Cant verify update'. also tried moving the file to root of phone, renaming it to 'update.zip' and still no luck, still getting the same message. it seems that the phone is well and truly locked down so it wont even take one of Xiaomi's own official updates, unless it is a progression from the present rom. that in my view is well over the top!!
tnx for trying and if you or anyone has another idea, please let me know. it appears that the thing to turn off is the verification of the rom. is that possible, and if so, how?
one thing i have noticed in the settings -->developer options is 'verify apps over USB. could this be anything to do with the rom verification failure? the txt for that is greyed out with the button on (redish) but i cant see how to change the setting. worth a try maybe? anyone know how to change it?
Ulver said:
Sounds like the problem is your recovery. You said you have no official recovery.
Sent from my Mi-4c using Tapatalk
Click to expand...
Click to collapse
you may well be right, but if that's the case, it was done by Xiaomi. is there a way of getting it to work? how do i actually check it isn't working? as stated before, when 'booting into recovery', i get an image of the phone on screen with the USB cable either connected or disconnected, depending on the actual state and nothing else happens. i have to do a reboot holding the start button to achieve this
Prettygrim said:
bear in mind i have no official recovery and obviously no TWRP.
Click to expand...
Click to collapse
I'm still waiting for my mi4c to come from China, and this is the reason why I'm gonna flash the latest (unlocked) official "stable" ROM first only to update the recovery and radio partitions right after I receive the phone. Resellers in China sometimes put their custom ROMs, recovery images or malware in the phones.
I don't think I'd flash twrp right away. I'd install cm12.1 or cm13 by "fastboot boot recovery.img" leaving the official recovery left in the phone so that I could go back to the official ROMs in the official way, and confirm if everything works as expected before flashing twrp.
What I don't understand is why people flash the dev (locked) ROMs as they are downloaded. What they need is just boot.img and /system, isn't it?? I'd replace "firmware-update" folder, where bootloader, radio and recovery images are located, in the dev ROM with the one from the stable ROM if I wanna try dev ROMs. Or I'd replace boot.img and system.* in the stable ROM with the ones in the dev ROM. Those modded ROMs should be able to be flashed with twrp...
the main reason for using the Chinese dev roms is because they are supposed to bee already rooted. once any of these roms is on the phone, according to what else i read, any rom going over the top would keep root. personally, i didn't find any rom that had root already and had to root my phone, following instructions i found on the MIUI and other sites. the built in recovery on my phone does nothing.
i had issues with TWRP when first using it, but put that down to being a novice. i found the files needed and the procedure to get out of the constant TWRP loop, which meant the phone was basically soft bricked and all was good. however, even that method fails now with the message something like 'phone is locked, cannot continue.
i have put an official complaint into Xiaomi about the bootloader locking and also about the time being taken to issue unlock codes, which is much longer than 3-21 days in some cases.
if i get anywhere, i'll post what i'm told
Since the latest miui ROMs are all based on Android 5.1.1, it's really easy to root mi4c yourself even on official standard ROMs. You don't have to flash dev ROMs or flash custom recovery like twrp. You can just run twrp on the fly like "fastboot boot twrp.img" to flash SuperSU.zip as long as bootloader is unlocked.
I'd say it's more dangerous to flash dev ROMs only for rooting especially if it's for your wife, not for yourself... Dev ROMs are for people who want to try new functions and designs still under development.
Anyway, I hope you will get an unlock SMS from xiaomi soon!
Had same Problem
search for miui_MI4c_V7.1.6.0.LXKCNCK_1debc127a9_5.1.zip
Hope it helps
So if the bootloader is locked, you can unlock it by flashing an older dev rom?
ermacwins said:
So if the bootloader is locked, you can unlock it by flashing an older dev rom?
Click to expand...
Click to collapse
No. Older Developer ROM will not work. Updater will refuse to update it. I tested a few of them back then, only by flashing the latest stable ROM back then (7.0.16) work.
cowithgun said:
No. Older Developer ROM will not work. Updater will refuse to update it. I tested a few of them back then, only by flashing the latest stable ROM back then (7.0.16) work.
Click to expand...
Click to collapse
And now flash the lastest developer and try roll back one o two a time (this work for my with the original recovery) and later use one rom from xiaomi.eu that one has not locked bootloader .
Sorry for my bad english.
i'm probably being real thick here guys. please bear with me. i am, as i said before, new to all this stuff with phones.
remember too that i have an unlocked bootloader now, courtesy of Xiaomi.
so, just to be clear, i am using miui_MI4c_5.12.31_5d6537a0b8_5.1.zip. to remove the possibility of Xiaomi doing something else to the phone that i dont want, i would like to get on to the xiaomi.eu_multi_libra roms. how do i go about doing this in idiot-proof steps, please? also, if i manage to achieve what i want, how do i stop the phone taking official updates? there must be a setting in the phone somewhere that can be disabled and prevent it updating to what i dont want. i found the one in the 'updater settings' but am of the opinion there is another somewhere that i cant find.
hope someone will be gentle with me
TIA
If you're already on Xiaomi.EU ROMs, you won't get OTA updates directly from Xiaomi that will lock your bootloader.
Sent from my Mi-4c using Tapatalk
i am on
miui_MI4c_5.12.31_5d6537a0b8_5.1.zip
which is an official rom, i believe. hence the questions in my former posts. i want to get on to the libre eu roms but am unsure how to go about it. i have read about using various roms first but i believe doing so is under certain circumstances, ie, bootloader locked, phone not rooted. my phone has the bootloader unlocked now by Xiaomi and i have rooted the phone. this is where my confusion comes in that i was hoping someone could clarify
You have unlock permission from xiaomi now, which means you don't need to worry about updates. You can unlock your phone again anytime you want. It's not one time only thing.
well that's a relief! tnx, qtotter! i didn't want to have to go through all this again, just because the maker decided i hadn't actually bought the phone, i had just bought permission to use it, as long as it was how he wanted me to use it!
bloody USA judge who decided that must have been paid a small fortune to rule in favour of this! just what the entertainment industries and others wanted!! didn't care what the implications were or ow the industries would take the p**s out of customers!!
hopefully this will help out some people and the developers to make,fix,restore a not so popular phone. I did a total firmware dump and have uploaded to my 4shared folder. If anyone is interested or can tell me how to upload it here for developing i will be more than happy to share with those in need. I also have a spare phone that i would be willing to test anything made from the firmware dump i created.
PLEASE link?
Some time after rooting my Optimus Zone 3 VS425PP, I got locked into a boot loop. There are no custom ROM's, neither recovery nor OS. It's not bricked. Yet, anyway. The loading screen functions, then a little window that says "OPTIMIZING APPS 1 OF 5, PLEASE DO NOT REMOVE THE BATTERY..." appears. I've seen this before, but now, upon reaching "APP 5 OF 5," it reboots and repeats. I've tried several factory resets via the LG RECOVERY (MODIFIED,) as well as safe mode to no avail. Anyone? Anything? Help? The only recourse I can think of would be to re-flash the stock ROM, which I cannot find. Anywhere. Thanks, guys.
i tried contacting judthro for the same file; no luck
Cruise Elroy said:
Some time after rooting my Optimus Zone 3 VS425PP, I got locked into a boot loop. There are no custom ROM's, neither recovery nor OS. It's not bricked. Yet, anyway. The loading screen functions, then a little window that says "OPTIMIZING APPS 1 OF 5, PLEASE DO NOT REMOVE THE BATTERY..." appears. I've seen this before, but now, upon reaching "APP 5 OF 5," it reboots and repeats. I've tried several factory resets via the LG RECOVERY (MODIFIED,) as well as safe mode to no avail. Anyone? Anything? Help? The only recourse I can think of would be to re-flash the stock ROM, which I cannot find. Anywhere. Thanks, guys.
Click to expand...
Click to collapse
Unfortunately, I don't think this file is actually out there. I have REALLY been looking, even contacted the LG Development team. The LG Support Tool, etc. are not going to help you yet as they do not have the firmware on their servers yet. That's why the LG Support Tool will freeze when trying to do an Update Recovery on this phone. -- And I've tried them all: LG Mobile Support Tool, LG PC Suite, Verizon VS425PP Update Tool (from the mounted drive on the phone), LG Flash Tool 2014 to force different KDZ files. All provide nothing. All dead ends. The Optimus won't grab a COM unless it is the right signed firmware for the phone. You'll just sit there in Download Mode or in Debug mode forever with no result. We have to wait for the first update from LG from version VS425PP1 to whatever comes next so they have something to stick on their server. But...if you find something before then, please let me know! The update will eventually be released to the public. It'll probably just take a year or so.
Good thing is Wal-Mart sells these for under $12 (yes, that's right). I picked up seven of these quad-core bad boys at that deal. Just bugs the hell out of me I can't fix the one I over rooted.
this *might* be promising...
Cruise Elroy said:
Some time after rooting my Optimus Zone 3 VS425PP, I got locked into a boot loop. There are no custom ROM's, neither recovery nor OS. It's not bricked. Yet, anyway. The loading screen functions, then a little window that says "OPTIMIZING APPS 1 OF 5, PLEASE DO NOT REMOVE THE BATTERY..." appears. I've seen this before, but now, upon reaching "APP 5 OF 5," it reboots and repeats. I've tried several factory resets via the LG RECOVERY (MODIFIED,) as well as safe mode to no avail. Anyone? Anything? Help? The only recourse I can think of would be to re-flash the stock ROM, which I cannot find. Anywhere. Thanks, guys.
Click to expand...
Click to collapse
well i'll be. this may be a promising link:
google "4share lgvs425pp" and scroll down to the 4shared link. There is a 999MB RAR file claiming to be the VS425PP ROM dump. I'm downloading it now...checking it out.
It works???!!! i have to root this cellphone because i need use with other company...
its not super useful yet
johhnyapplefake said:
well i'll be. this may be a promising link:
google "4share lgvs425pp" and scroll down to the 4shared link. There is a 999MB RAR file claiming to be the VS425PP ROM dump. I'm downloading it now...checking it out.
Click to expand...
Click to collapse
hopefully the op will chime in for insight. The 999MB isn't much good. It appears to be a RAR dump of all the partitions, perhaps made from a lglaf.py script while in download. Nevertheless, i havent found any way yet to push the firmware dump onto the phone.
I've had no luck, either.
johhnyapplefake said:
hopefully the op will chime in for insight. The 999MB isn't much good. It appears to be a RAR dump of all the partitions, perhaps made from a lglaf.py script while in download. Nevertheless, i havent found any way yet to push the firmware dump onto the phone.
Click to expand...
Click to collapse
Meanwhile, as my LG cycles endlessly through my really cool "Jolly Roger" boot animation, I stumbled across a Kyocera Hydro Wave at Walmart for $20. I snapped it up to replace the LG Optimus Zone 3. I had big plans to root it, too., but I should've researched it first. The specs are great... but one check on Cyanogen's website probably would've saved me some trouble. Not one Kyocera device is listed there. XDA thread also throws red flags-no one can get root to stick. Well, I at least learned a lesson. Next time, I plan to purposefully buy a phone that can be rooted, has been rooted, has instructions online to do so, AND has at least one custom ROM available! No wonder this thing was $20! Keep us all posted if you stumble across a bootloop fix of some kind, and I'll do the same.
here is stock recovery for this device https://www.dropbox.com/home/Apps/Flashify/VS425PP/recovery
matt4787!
Either I am unable to open that link from an Android device OR the link given is to an unshared folder? It just asks me to log in and then says 'that folder does not exist in your DropBox...' PLEASE check out the SHARE link from within your DropBox and maybe share a new folder (and drop the stock ROM in there, along with what you might've used to flash it maybe?) We'd be very grateful!
Recovery
https://drive.google.com/file/d/0B1Nk8cx3_QgAeGNxZ1JrUmtFS0E/view?usp=drivesdk
Try now
hope my post helped some ppl. now to get twrp recovery ported here.
Thank you matt4787!!
Sent from my C6740 using XDA-Developers mobile app
To all who have a bricked,phone this phone has an update. Download the LG software assistant and put assistant in repair mode then boot phone normally and wait a bit. Run the repair assistant and let it run. Hopefully if everything runs well as it did me. Mine is restored and running.
Just ordered one. Is there root for this phone? Unlocked bootloader or forgetaboutit?
I rooted this phone and then tried to de-bloat, but I must have deleted too much. Now when I boot all I get is "Security Error - Authentication Fail #9"
I can get to Download mode, but none of the recovery programs recognize the phone. I installed the drivers, but still nothing. Is there anything I can do?
matt4787 said:
To all who have a bricked,phone this phone has an update. Download the LG software assistant and put assistant in repair mode then boot phone normally and wait a bit. Run the repair assistant and let it run. Hopefully if everything runs well as it did me. Mine is restored and running.
Click to expand...
Click to collapse
was your phone in a "security error" loop? for some reason the software assistant won't recognize my phone. it'll identify a plugged in phone when I connect it in download mode, but the device model never shows up
nikicollazo said:
was your phone in a "security error" loop? for some reason the software assistant won't recognize my phone. it'll identify a plugged in phone when I connect it in download mode, but the device model never shows up
Click to expand...
Click to collapse
i forgot to mention that you have to be in download mode to make the assistant recognize the phone. plus make sure the drivers for the phone are installed on your pc
matt4787 said:
i forgot to mention that you have to be in download mode to make the assistant recognize the phone. plus make sure the drivers for the phone are installed on your pc
Click to expand...
Click to collapse
hello as you did to install the drivers , I find no way to reconnoitre the mtp device ! Thank you
angelgabg said:
hello as you did to install the drivers , I find no way to reconnoitre the mtp device ! Thank you
Click to expand...
Click to collapse
this one is troubling. hmm you got the stock rom from lg? if so then try downloading the drivers from verizon.
Any updates on recoveries? I hate being scared of tweaking due to not having a backup .-. Anyone find something? Plz lemme know, thx! Btw kingo root 4.5 seems to have root for this phone but super sume seems to brick it. Just a heads up eace:
I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!
send to lg said stop working no luck with tihs hard brick
Source code to rom¿?
I ran into basically the same situation as you. I'm currently downloading Android open source project on to a fresh install Ubuntu 16.04. I am currently in the middle of running sync.
I'm curious if there is anybody out there who would be willing to give a few pointers, on compiling the ROM from LG open source code. They told me I had to use it in the readme.txt.
Im a noob with fair knowledge of modding and stylo not stylo 2. There's no way to say for sure if this will work but on lg mm on h631 u need to unlock dev option in settings 1st. Make sure to check off oem unlock and usb debugging. Connect to pc and you will get a popup or 2, one will ask to allow pc to connect to phone, the second is to allow usb debugging. After you allow both, open cmd in your adb fastboot folder. Type " adb reboot bootloader." should reboot the phone to bootloader/fastboot mode. Then you type " fastboot oem unlock." you will see sending.. Once sending is done type " fastboot reboot." when the phone restart you should see bootloader unlocked on splash screen. Then i rooted with kingroot. Then use rashr to flash twrp. Then used twrp to flash supersu to get rid of kingroot.. My h631 now in business and i just started working on a port for lg ux 5.0. This is the guild i use for a better idea http://forum.xda-developers.com/lg-g-stylo/how-to/guide-lg-g-stylo-how-to-root-t-mobile-6-t3333916. You might need lgflashtool and kdz to unbrick..
NO NEED to beg.
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis
Hello Sir, I ran into same problem trying to root. If you can, can you please send me a link so that i can use my phone again. Thank You it will be greatly appreciated
can some one help me. i cannot use adb to unbrick
Please send me the link
facorbin said:
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis
Click to expand...
Click to collapse
Hi, can you please send me the link? I need it bad thx
if you cant boot into dlmode then your hard bricked, so find a way to get back to dl mode/recovery
BIN File
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware
estebangtz said:
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware
Click to expand...
Click to collapse
cna you possible sned me it I might be able too
no longer have the bin file
HERPDERP202 said:
cna you possible sned me it I might be able too
Click to expand...
Click to collapse
I am sad to say my computer stopped working and just got it back today, all my information was lost so I no longer have the bin file
bsimpson1858 said:
I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!
Click to expand...
Click to collapse
you can go into download mode by pressing volume up key and inserting usb cable .press the volume up until you see download mode a firmware readed by z3x box is available on clamgsm forum you can flash it with z3x box crack .
I seem to be in and endless loop of hope and despair with my Samsung Galaxy S7 - can anyone shed any light on this?
Long story short, I was on Android 8 and wanted to roll back to 7 (using a ROM I took from Sammobile) because I needed a previous configuration of Google Play Music for my Smart Watch to work. I used Odin to flash the phone and it declared the procedure as FAILED. Now I can't seem to even flash it back to version 8. It is just stuck on the below three screens, no matter what I do.
At this point I would happily just upgrade it to whatever firmware will work and not have a £500 brick on my hands!
Please note the images are at h t t p s ibb.co slash the below (sorry this forum doesn't allow me to post them as links!)
JcwK0vK
55F2cSf
B3Js056
Thanks
Charlie
phikal2013 said:
I seem to be in and endless loop of hope and despair with my Samsung Galaxy S7 - can anyone shed any light on this?
Long story short, I was on Android 8 and wanted to roll back to 7 (using a ROM I took from Sammobile) because I needed a previous configuration of Google Play Music for my Smart Watch to work. I used Odin to flash the phone and it declared the procedure as FAILED. Now I can't seem to even flash it back to version 8. It is just stuck on the below three screens, no matter what I do.
At this point I would happily just upgrade it to whatever firmware will work and not have a £500 brick on my hands!
Please note the images are at h t t p s ibb.co slash the below (sorry this forum doesn't allow me to post them as links!)
JcwK0vK
55F2cSf
B3Js056
Thanks
Charlie
Click to expand...
Click to collapse
OK i've seen them, don't panic.
What region / country are you
What network are you on?
p.s. YOU CANNOT DOWN GRADE OFFICIAL FIRMWARE
I'm with O2 in the UK.
I'd be happy just to get anything installed on it at this point. At least then it's useable.
Whenever I try a new flash (even with Oreo obtained from Sammobile) it just gets nowhere. The COM shows connected (I have the USB drivers installed and have ditched Kies) and I browse to the extracted AP file then click start it either goes away indefinitely not showing failed or success or (with another AP file e.g. for older firmware) it just says Failed.
Thanks very much.
phikal2013 said:
I'm with O2 in the UK.
I'd be happy just to get anything installed on it at this point. At least then it's useable.
Whenever I try a new flash (even with Oreo obtained from Sammobile) it just gets nowhere. The COM shows connected (I have the USB drivers installed and have ditched Kies) and I browse to the extracted AP file then click start it either goes away indefinitely not showing failed or success or (with another AP file e.g. for older firmware) it just says Failed.
Thanks very much.
Click to expand...
Click to collapse
Ok you have to down load the firmware that was on the device from O2, so download O2 Oreo from sammobile or the unbranded BTU firmware and flash with Odin. This should give you access to the device but the google account needs to be bypassed and then wiped by following this method https://www.progeeksblog.com/frp-bypass-apk/
Ok I'll give that a go. Wow pretty detailed guide there. I've not heard of the frp bypass requirement. Another thing to get my head around. Why can't phones just be like PC's. Image them, clone and be done!
Thanks again will let you know how I get on.
Restoring to the BTU firmware posted here forum.xda-developers.com/galaxy-s7/how-to/galaxy-s7-flat-oreo-firmware-download-t3785309 worked! In my case I didn't even need to run the frp-bypass-apk. Turns out that my phone was restored to exactly as it was before I attempted to downgrade so I even have my data back.
Thanks so much for helping me out!
Brilliant. Now to save yourself a world of pain in future turn on OEM unlocking in development options.
Just a couple more questions if you don't mind?
1) What is OEM unlocking
2) Do you know of any way to "roll-back" my version of Google Play Music? I am currently running version 8.14.7427-1H and would love to return to an earlier one since it handles the Android Wear playlist differently.
Thanks!!
phikal2013 said:
Just a couple more questions if you don't mind?
1) What is OEM unlocking
2) Do you know of any way to "roll-back" my version of Google Play Music? I am currently running version 8.14.7427-1H and would love to return to an earlier one since it handles the Android Wear playlist differently.
Thanks!!
Click to expand...
Click to collapse
Well there's some settings on the phone itself which, when you mess up trying to flash etc makes life a whole lot easier to bring your phone back to life. A good explanation of OEM is here https://www.quora.com/Whats-an-OEM-unlock-in-Android
With regards to rolling back Play music yes you can almost always roll back an updated app either by uninstalling the update via settings>apps or finding an earlier version of the .apk file online by simply searching for it in google.
When downloading .apk files, to be able to install you have to enable "install from unknown sources" settings>security>unknown sources.
Hope this helps
Brilliant. Thanks I will give that a go.
Here is the stock firmware including the firehose needed to flash it
B10 Firmware
Here
B12 Firmware
Here
ZPI file for ZTE SalesMultiDL tool
Here
Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download the firmware from above
Extract the firmware to a folder that you can easily access them from like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8917.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
Here is the Stock wallpapers in case anyone wants them
https://www.androidfilehost.com/?fid=1395089523397903558
I just got this device a couple days ago and was hoping I could use PDANet/Foxfi to connect more than one device at a time to wifi hotspot but they've evidently blocked the apps.. Do you have any insight to that?
pegb856 said:
I just got this device a couple days ago and was hoping I could use PDANet/Foxfi to connect more than one device at a time to wifi hotspot but they've evidently blocked the apps.. Do you have any insight to that?
Click to expand...
Click to collapse
I don't own this device sadly just grabbed the firmware for a friend of mine and posted it here in case anyone in the future wants it.
deadman96385 said:
I don't own this device sadly just grabbed the firmware for a friend of mine and posted it here in case anyone in the future wants it.
Click to expand...
Click to collapse
Ok thank you for the reply.
deadman96385 said:
I don't own this device sadly just grabbed the firmware for a friend of mine and posted it here in case anyone in the future wants it.
Click to expand...
Click to collapse
If you WANT to own this device it's currently $19 out the door on visible.com. No Trade required.
https://slickdeals.net/f/13221781-visible-r2-is-now-19-without-service-or-trade-in-requred
I'm gonna see if I can flash Chinese firmware to unlock the bands
Bowsa2511 said:
I'm gonna see if I can flash Chinese firmware to unlock the bands
Click to expand...
Click to collapse
Good Luck finding the A0722 firmware (that's the model androidpolice thinks this is a renamed version of).
famewolf said:
Good Luck finding the A0722 firmware (that's the model androidpolice thinks this is a renamed version of).
Click to expand...
Click to collapse
https://imgur.com/yOe0vIx
Your elite google-fu obviously exceeded my own. Please make that sharable if you can....megaupload.nz would hold it and is free.
famewolf said:
Your elite google-fu obviously exceeded my own. Please make that sharable if you can....megaupload.nz would hold it and is free.
Click to expand...
Click to collapse
https://mega.nz/#!aRo0CaBA!nm37c3V11tr2260V23wIxb4yZufD5-_f6gID8i3HjSY
Let me know if it's helpful
DISREGARD. Looks like out of date info.
Any of you able to get fastboot working on it? ADB works, but my fastboot doesn't detect the phone.
Nice looking out, just ordered one.
Using one of the hidden activities app from the play store. There is an option to change from LTE to 2G/3G/4G under one of the phone settings. But calling still did not work with either AT&T or T-Mobile.
famewolf said:
Good Luck finding the A0722 firmware (that's the model androidpolice thinks this is a renamed version of).
Click to expand...
Click to collapse
Just a heads-up: even if you found the files for the A0722, you'd brick your R2 if you managed to flash them. The chassis and screen seem to be the same, but they're completely different specs-wise. Given that the A0722 has a different SoC and an eMMC chip 2-4x larger, I doubt you'd get real far in the flashing process in the first place.
FEGuy said:
Just a heads-up: even if you found the files for the A0722, you'd brick your R2 if you managed to flash them. The chassis and screen seem to be the same, but they're completely different specs-wise. Given that the A0722 has a different SoC and an eMMC chip 2-4x larger, I doubt you'd get real far in the flashing process in the first place.
Click to expand...
Click to collapse
In my case my main goal was to use it and the factory software to learn about mbn files. I've dealt with LG's TOT and KDZ files but not the mbn's. Thanks for giving folks the warning though.
Would it be possible for someone to grab the download URL for whatever OTA update is available for the device? I don't think it's anything major but I'd like to poke around at it; the firmware uploaded here seems to be from launch.
FEGuy said:
Would it be possible for someone to grab the download URL for whatever OTA update is available for the device? I don't think it's anything major but I'd like to poke around at it; the firmware uploaded here seems to be from launch.
Click to expand...
Click to collapse
I've got a logcat recorder queued up to be installed and will try to grab an url by starting the download. If that fails there are a couple of alternatives....someone who has DONE the upgrade could rip the rom and make it available if @deadman96385 can point to some instructions on how to rip the rom.
Also you can always let your own upgrade occur because he's already provided the original software and QFIL which would let you restore to original factory and get the update again.
As a last resort I can grab the log from my ROUTER that the phone is connected to and try to get the url that way which I've had to do with SOME devices.
I'll probably end up taking the OTA again anyways as I've been messing around with the firmware from the first post. Honestly, I'd really recommend staying away from flashing it without a good reason. Even when the flasher works, either the logging and/or the flasher hangs and it's close to impossible to tell which without unplugging your phone. If a partial flash leaves you in a state where you can't get to ADB to boot to EDL mode, you'll have to boot into diagnostics mode, use a piece of Chinese software to boot from there back to EDL, and within five seconds or so, close that software and start the flashing process from QFIL before the com port stops responding to requests, leaving you to reboot the phone and start again.
I've been trying to get non-LTE networks and calling working, but it's entirely impossible to tell whether my tweaks are having unintended side effects or if the flashing just crapped out partway through, even when I'm just flashing single partitions.