Database Info

Save my life guys.Lg Optimus bricked ...

Hey guys ,you are my only hope.I have a Lg Optimus gt 540 and it wass updated to 2.1 but I've tried Type Fresh(that app witch change the fonts) and yes I rooted it.But when I've change some fonts it restart and it didn't won't to boot up anymore.So I've tried to reflash it.It start well but at 14% if the install phone froze,I've waited few houers and it still wass at 14%.Then i've tried to intall the rom all over and my PC crashed.Now my phone won't even start.
I know that here is the only place that someone can help me
Sorry for my bad english.

we're on the same boat here, just that i have an optimus one (p500)... let us know, if you get to resolve this, please

My LG Optimus T (p509 I believe) has a similar problem.
Phone was able to get to emergency mode, but due to my mistake with a rom now it will not even turn on.

daganb said:
My LG Optimus T (p509 I believe) has a similar problem.
Phone was able to get to emergency mode, but due to my mistake with a rom now it will not even turn on.
Click to expand...
Click to collapse
is your p509 just booting the LG screen and in a continuos loop?
can you get it into download mode?
pm me so i can give you my MSN/Skype so i can explain to you how to fix this.

invictos said:
Hey guys ,you are my only hope.I have a Lg Optimus gt 540 and it wass updated to 2.1 but I've tried Type Fresh(that app witch change the fonts) and yes I rooted it.But when I've change some fonts it restart and it didn't won't to boot up anymore.So I've tried to reflash it.It start well but at 14% if the install phone froze,I've waited few houers and it still wass at 14%.Then i've tried to intall the rom all over and my PC crashed.Now my phone won't even start.
I know that here is the only place that someone can help me
Sorry for my bad english.
Click to expand...
Click to collapse
when you reflashed you device did you wipe the previous ROM? you need to wipe the old rom before reflashing, because when you reflash the ROM it does not erase the previous one you have. try wiping the old ROM...imho c",?

My lg optimus bricked as well
I have bricked my LG optimus p500. I am able to get into emergency mode by pressing search + vol down.
I am not sure what is emergency download mode and what are the key combinations to get into it. What should I do next. I have KDZ updater available with me but its not helping.
It says: "PHONE not found"

I'm stuck in fastboot on boot. Fastboot commands works on the phone but since it doesnt detect my sd card i can't flash or do anything. And i'm a noob when it comes to the commands in fastboot and adb... but gimme a shout if you've got a hint to my salvation
got le optimus one

belabe said:
we're on the same boat here, just that i have an optimus one (p500)... let us know, if you get to resolve this, please
Click to expand...
Click to collapse
am with you

After days of living a double life
I downloaded the LG KDZ UPDATER but needed to find instructions on using after hours of failed attempts and came across a forum here that spoke of english version of the KDZ UPDATER that does not need windows enabler and that saved my phone.
Visit LG, download and install all the drivers offered for your model first. Then you will need to find the kdz updater file for your phone I could only find the one for the opt p500 and I have a p509 but used it anyway and boy was I happy to see the phone shut down and show the battery charging animation. I still had to do a factory reset afterwards because the phone kept getting stuck at the android screen. So the phone booted and I noticed there were some limitations like not being able to install apps because the phone would not acknowledge the apps on my SD CARD and I could not get a network connection to save my life.
I used the updater software for my phone that I downloaded from LG and did a software update and were back in business. I missed my baby. All of the essentials besides the LG software came from reading the forums here which I am so happy, thankful and greatfull for. Thanks to every one who posted what little progress they were making step by step. If your phone is stuck at the LG logo and you don't know by now,pressing and holding down the up volume, back and power keys while phone is off will put your phone in emergency mode. the drivers for your device will recognize your phone in emergency mode. I did not provide any links to make it that easy for you because my struggle gave me more knowledge than I was looking for but was much needed. Good Luck to all. I am know optimistic about doing additional mods to my device due to my faith in this recovery from a brick. I immediately came here minutes after my success to help and give thanx. I really appreciate the fact I did not have to talk or go to my carrier about this.

sk8erdude525 said:
is your p509 just booting the LG screen and in a continuos loop?
can you get it into download mode?
pm me so i can give you my MSN/Skype so i can explain to you how to fix this.
Click to expand...
Click to collapse
Hi, I have an LG Optimus T. I am a noob.rooted successfully and after that was trying to flash a custom recovery. I guess I screwed up some obvious thing and now the phone is stuck on the LG logo when ever I turn on, may be the continuous boot loop. When I connect it to PC, nothing is detected. Searched all over web and couldn't find any help except for this thread.
Btw, I tried holding down the buttons to see if it goes into recovery. does nothing.
Can some one please help me!!!
Thanks!!

Kratos4ever said:
Hi, I have an LG Optimus T. I am a noob.rooted successfully and after that was trying to flash a custom recovery. I guess I screwed up some obvious thing and now the phone is stuck on the LG logo when ever I turn on, may be the continuous boot loop. When I connect it to PC, nothing is detected. Searched all over web and couldn't find any help except for this thread.
Btw, I tried holding down the buttons to see if it goes into recovery. does nothing.
Can some one please help me!!!
Thanks!!
Click to expand...
Click to collapse
same problem here!!!

reyesryanmjaube said:
same problem here!!!
Click to expand...
Click to collapse
Finally, out of the dumps. Followed this thread's first post
http://forum.xda-developers.com/showthread.php?t=883314
( and the links in the thread to get the KDZ updater and the stock rom download from LG) to the word, including all the shaking. Got into the emergency mode, used the KDZ updater to install the ROM, (had to shake the phone until the updater detected it, ) and have the phone back and running.
For the rom downloads, none of the US T-mobile roms are available for download. I downloaded the Australian rom. follow the links in the post carefully, its all there.
XDA developers rock!!

Kratos4ever said:
Finally, out of the dumps. Followed this thread's first post
http://forum.xda-developers.com/showthread.php?t=883314
( and the links in the thread to get the KDZ updater and the stock rom download from LG) to the word, including all the shaking. Got into the emergency mode, used the KDZ updater to install the ROM, (had to shake the phone until the updater detected it, ) and have the phone back and running.
For the rom downloads, none of the US T-mobile roms are available for download. I downloaded the Australian rom. follow the links in the post carefully, its all there.
XDA developers rock!!
Click to expand...
Click to collapse
My poor Optimus T is bricked too Can anyone link me to the stock T-Mobile ROM (KDZ file) please?

quailallstar said:
My poor Optimus T is bricked too Can anyone link me to the stock T-Mobile ROM (KDZ file) please?
Click to expand...
Click to collapse
This is the thread which is linked in the thread that I gave in the previous post.
http://forum.xda-developers.com/showthread.php?t=865479
you can find all the codes for different country specific LG ROMS and also how to download the file. USA files were not available so I downloaded Australian ROM. works great. much lesser bloatware than our T-mobile.

Kratos4ever said:
This is the thread which is linked in the thread that I gave in the previous post.
http://forum.xda-developers.com/showthread.php?t=865479
you can find all the codes for different country specific LG ROMS and also how to download the file. USA files were not available so I downloaded Australian ROM. works great. much lesser bloatware than our T-mobile.
Click to expand...
Click to collapse
I've tried this but it is confusing as all heck. I don't know the exact firmware version I'm looking for in the weblink. Urgh I'm getting frustrated and I have a lot of patience for these kind of things, lol.
I found this. This the correct Australian one? Assuming I need to be looking for an LGP500 file?
Does this one work?
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AAUSBK/V10a_00/V10A_00.kdz

yeah, thats the one i used. the toughest part is shaking the phone if kdz updater doesnt detect it

Kratos4ever said:
yeah, thats the one i used. the toughest part is shaking the phone if kdz updater doesnt detect it
Click to expand...
Click to collapse
OK, glad to know I'm getting somewhere. Downloaded that kdz, phone is on EMERGENCY MODE, but now trying like crazy to have it detected by the KDZ updater.

shaking is the only way. i had to shake it and restart updater half a dozen times before finally got it to detect the phone. its a test of patience. after it is detected, take it easy and let it do its thing. takes a while for the phone to boot up for the first time.

Kratos4ever said:
shaking is the only way. i had to shake it and restart updater half a dozen times before finally got it to detect the phone. its a test of patience. after it is detected, take it easy and let it do its thing. takes a while for the phone to boot up for the first time.
Click to expand...
Click to collapse
OK thank you I will let you know how it goes...

Kratos4ever said:
shaking is the only way. i had to shake it and restart updater half a dozen times before finally got it to detect the phone. its a test of patience. after it is detected, take it easy and let it do its thing. takes a while for the phone to boot up for the first time.
Click to expand...
Click to collapse
No luck at all. The KDZ uploader refuses to recognize the phone. I've been shaking my life away with no darn luck. I even tried booting Windows 7 into Safe Mode in hopes of this helping; nothing was accomplished.

[HELP] Looking for Stock Rom for Alcatel OT-983

Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers

root alcatel ot 983
ahkronn said:
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
Click to expand...
Click to collapse
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance

mohamm said:
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
Click to expand...
Click to collapse
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.

I need original stock alcatel ot 983 rom
hi guys
I bricked my ot 983 after flashing with different alcatel models rom
can some one please give me a copy of original stock rom for alcatel one touch 983
please
my email [email protected]

maybe your handheld is a brand new and nobody mod it yet
be patient bro and keep searching in google with any keyword

help me make tutorial on youtube
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
bro i dont know much about android stuff , but pls can you make a tutorial on youtube like this you can help me and millions out there for rooting the phone , ps help and thanks so much in advance

ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
Where did you get the upgrade from ?

My story is like this: rooted, uninstalled some bloat from system and after a factory reset I'm stuck in the initial setup wizard (after completing almost all stages from setup it crashes at the end, after connecting at the google account - tryed to ignore that step but either way it crashes). Fastboot works but adb don't.
I do have another identical phone Alcatel One Touch OT-983 but with no root, with no modifications. Is there a way to backup the original/stock image and flash it over the malfunctioning one and restore it??
I tried with the proprietary upgrade tool from Alcatel but no succes as it close saying I don't need an upgrade because it's the last version of software installed in my phone. I thought even to broke intentionally the rom but I'm afraid that the upgrade utility from Alcatel will let me down, as I read that another users didn't managed to complete successfully the upgrading process. Is there a way to trick the system that has a previous version of Android?
Thank you for taking your time to read this and hope someone has an idea to solve our problem.
Have a nice day guys, you can contact me at puiocku at gmail dot com.

Have someone this stock rom (for Alcatel One Touch 983 (Valencia)) ???

Here is a Alcatel OT-983 rom, not sure which country it is from: https://www.dropbox.com/s/g2ljtrpqru3uihm/rom 983.zip?m
Here is my o2 uk backup rom: http://www.mirrorcreator.com/files/C4VEKHEI/OT-983_backup_uk.rar_links
this .zip file contains the boot.img, system.img and recovery.img
Someone needs to create a clockwork mod recovery for our phones now.

here is the sourcecode for this phone: http://www.mirrorcreator.com/files/85KDRTYP/OT_983_20130103.7z_links

Can't get to recovery
I have a bricked rooted OT 983, by error i installed a ZTE Blade's CM9 ROM and now i can't get my phone to recovery by using ADB that is the only way, i have downloaded the stock ROM but i don't know how to install it. :crying: PLEASE HELP!!!!!!!!!!!!!!!!!!!!

i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen

Possible solution for getting back original ROM on "stuck" phone
ryanraven said:
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Click to expand...
Click to collapse
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.

to Hajj_3 :
Tanks for share the ROM.. I need it to recover my friends phone..

I just got this phone, not looking to root it yet as theres no option for a custom rom yet.
didnt want to start a new thread as theres not really any section for this phone yet.
Everything was fine until i installed the firmware update. Now applications cannot access the mic. Some complain about it being in use by another app. others like video editor or sound recorder will record, but the video recorder there is no file, and sound recorder crashes when you hit stop.
Alcatels website is useless, wasnt working yesterday, today it is but cant find any contact details incase its a bug in there firmware. Everything works fine except for that. Which is annoying because i use RTA software and now it doesnt as it cant access the mic.
any ideas?

Hi guys,
I've rooted my phone with abd and udpate.zip a long time ago, and it was fine till some days ago it stopped from receiving calls and the home button does nothing when pressed, although in recovey mode it works.
I've done a hard reset, reflashed the recovery.img, system.img and boot.img I've found in this post with fasboot, but did not solve the problem.
I've tried a firmware update with Alcatel's own software but it just keeps saying my firmware is updated already. I've also tried to edit the proinfo file, but I don't know what to change in the file. You can see more about that method here: http://forum.gsmhosting.com/vbb/9772370-post8.html
My guess is that the files that are corrupted and preventing me from receiving calls are somewhere else than those img's I've flashed. Has anybody got a FULL backup of his rom (e.g. Rom Manager) so I can recover the phone completely?
Thanks!

upgrade software
bussand said:
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
Click to expand...
Click to collapse
The problem is, the upgrade software link doesn't work anymore :\.
ht tp: // ww w1. alcatelonetouch.com/global-en/ support/download/one_touch_ 983.html
(remove of spaces, im a new user so they won't let me post one)
Is there anyway someone can find a link for it because i have been searching for ages and haven't found one.

http://www.alcatel-mobilephones.com/global-en/support/download/one_touch_983.html

LG Stylo 2(K540)- At this point I'm begging for help!

I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!

send to lg said stop working no luck with tihs hard brick

Source code to rom¿?
I ran into basically the same situation as you. I'm currently downloading Android open source project on to a fresh install Ubuntu 16.04. I am currently in the middle of running sync.
I'm curious if there is anybody out there who would be willing to give a few pointers, on compiling the ROM from LG open source code. They told me I had to use it in the readme.txt.

Im a noob with fair knowledge of modding and stylo not stylo 2. There's no way to say for sure if this will work but on lg mm on h631 u need to unlock dev option in settings 1st. Make sure to check off oem unlock and usb debugging. Connect to pc and you will get a popup or 2, one will ask to allow pc to connect to phone, the second is to allow usb debugging. After you allow both, open cmd in your adb fastboot folder. Type " adb reboot bootloader." should reboot the phone to bootloader/fastboot mode. Then you type " fastboot oem unlock." you will see sending.. Once sending is done type " fastboot reboot." when the phone restart you should see bootloader unlocked on splash screen. Then i rooted with kingroot. Then use rashr to flash twrp. Then used twrp to flash supersu to get rid of kingroot.. My h631 now in business and i just started working on a port for lg ux 5.0. This is the guild i use for a better idea http://forum.xda-developers.com/lg-g-stylo/how-to/guide-lg-g-stylo-how-to-root-t-mobile-6-t3333916. You might need lgflashtool and kdz to unbrick..

NO NEED to beg.
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis

Hello Sir, I ran into same problem trying to root. If you can, can you please send me a link so that i can use my phone again. Thank You it will be greatly appreciated

can some one help me. i cannot use adb to unbrick

Please send me the link
facorbin said:
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis
Click to expand...
Click to collapse
Hi, can you please send me the link? I need it bad thx

if you cant boot into dlmode then your hard bricked, so find a way to get back to dl mode/recovery

BIN File
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware

estebangtz said:
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware
Click to expand...
Click to collapse
cna you possible sned me it I might be able too

no longer have the bin file
HERPDERP202 said:
cna you possible sned me it I might be able too
Click to expand...
Click to collapse
I am sad to say my computer stopped working and just got it back today, all my information was lost so I no longer have the bin file

bsimpson1858 said:
I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!
Click to expand...
Click to collapse
you can go into download mode by pressing volume up key and inserting usb cable .press the volume up until you see download mode a firmware readed by z3x box is available on clamgsm forum you can flash it with z3x box crack .

Tribute 5/Kingroot/No Command Screen

So following the instructions here I rooted my LG Tribute 5 when I got it with Kingroot. And everything was fine for months. Until System Updates started to pop up regularly but I could never get them to install(they would error out). After a quick search I learned the updates won't install cuz the device was rooted. And a quick unroot would get the install to work.
I just unrooted through the kingroot app and started the updated. Before, when I tried the update it would error out about a quarter of the way through. This time the bar made it all the way to the end and then error'd out. I didn't think much of it. So since the device was stuck I took my battery out and back in. The device went through the boot process, then a No Command error popped up. Never saw that before.
So I tinkered with it a bit and kept getting the error. So I got into the Recovery Menu to do a full wipe and factory reset. I did that, but the No Command still popped up.
I know I can put a custom rom file on my external sd card and install that through recovery, right? The thing is I would like to install Slimrom, but there are a ton of downloads on the sites download page. So I'm asking for a little help on directions on a slimrom that will work on the LG Tribute 5.
And if there isn't a custom rom that works with a tribute 5,can I get a recommendation of one a custom rom that does? I'm into lightweight and minimalistic. By the way, I didn't have a custom rom on my phone, just had it rooted.
Thank you so much in advance for any and all help

No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.

No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.

Do you have a custom recovery as well? If it is only the stock recovery, which blocks most zips, your very option may be to use LG UP and the stock dz file and return the device to stock. The process to update can be done from that point.

I'm pretty sure I only have the stock recovery. I knew i should have installed TWRP...
So just search for LG UP and the stock firmware and they should be easily accessible?
Thanks for the reply xanscorp.

https://drive.google.com/folderview?id=0B0KV4b0_G1PQZW95ZmloejU5dFk
The LG UP program and .dz file are in there.

That's awesome! Thank you very much for linking the files for me.
I'm gonna do this in a couple hours when I get home and I'll let you know how it went.
Much appreciated xanscorp

One last stupid question... Just the LG Up and.dz files are the only two I need right?
I'm guessing so, but just wanna be sure.

Yes. It'll put you back to stock.
Unfortunately I haven't yet found how to get the ZV5 firmware fully rooted (i.e. a custom recovery) but it can be partially rooted with KingRoot. (http://www.kingroot.net/wap)

I just finally got around to giving this a shot. Sheesh....
Anyways I downloaded the files, put them on my external SD card, popped my SD card into my phone, then booted my phone to recovery. I went to install update from SD, and the phone didn't find any files. Hmmm....
I'm definitely doing something wrong. The .msi file looks like an executable. So I hopped onto Windows to install it. It installed, but when I run the program it can't find my phone when I plug it in.
I'm about to just give up, trash this thing, switch to a different provider and get another new phone. This time I won't mess with Kingroot. I'm pretty positive that's the app that screwed things up. I've had three different phones, rooted all three through different methods, and never had a problem.

Things files are to restore from a pc using LG Up for Windows... that's why it's a Microsoft Installer (.msi) file.

Yeah I figured that. But when I plug my phone into the computer my phone isn't recognized. I'm assuming because it boots straight to a No Command screen.
So since the computer doesn't recognize it neither does LG Up. Any trick to get around this?

Still haven't gotten this phone back to working. This is the first time I've really been stumped after a brick.
Please...anymore help?
Sent from my KFFOWI using Tapatalk

You find annything cause my same phone did the same thing

Sure haven't bud.
I've tried the help in the thread with no success

AT&T Radiant Core (Tinno U304AA) - Modding Discussion

Picked up an AT&T Radiant Core for cheap at a store around me. I don't intend to use it with AT&T, it was just such a low price that I figured I'd get it and see if I can break into it just for fun. It's an MTK6739 chipset phone, so in theory it should be easy to pull partitions from this thing with something like SPFT (or Miracle Box, if you paid for it) and do a dirty port of TWRP to get root privileges on it. But this is harder than it seems.
I need an auth file to do anything with SPFT. Apparently this has to do with some kind of "secure boot" mechanism that MediaTeks sometimes have now. There's no stock firmware for this device online from what I can find, nor for the generic version of the device, the Tinno U304AA (AT&T just rebranded it). If I had a stock firmware image, maybe I could risk wiping the partitions and reflashing the stock firmware to get rid of the secure boot stuff.
I saw a guide for how to access the bootloader on the Tinno U304AA generic version, but on the AT&T version of the phone there's no option in the boot select menu (Vol. UP + Power) to get to the bootloader to run a fastboot oem unlock. All the AT&T version has is recovery and normal boot. I'm not sure what I can do to maybe reset this to get the other options. Maybe if I had the stock firmware for the generic version of the phone I could overwrite it and get access to those other options.
Either way, just posting this up for anyone else that got one of these and wants to collaborate/contribute. Maybe with enough collective brainpower we can make something happen.

UPDATE: found a stock system image dump, thank you to @lopestom for directing me to this. This guy's been the MediaTek king for as long as I can remember.
It appears to be a dtbo and system partition dump. It also has the vendor partition and a (partial?) boot image dump. Not sure if things like the full boot and recovery images are stored somewhere in here, I didn't look too deeply into it yet. I have no idea how whoever this is managed to pull these partitions... they either got root access somehow, or they found a proper Download Agent and Auth file to pull it all. Either one of these would be awesome. I reached out to the user to ask them how they did it, we will see what they say if they want to share how they did it.
https://git.rip/dumps/att/u304aa

jasonmerc said:
Picked up an AT&T Radiant Core for cheap at a store around me. I don't intend to use it with AT&T, it was just such a low price that I figured I'd get it and see if I can break into it just for fun. It's an MTK6739 chipset phone, so in theory it should be easy to pull partitions from this thing with something like SPFT (or Miracle Box, if you paid for it) and do a dirty port of TWRP to get root privileges on it. But this is harder than it seems.
I need an auth file to do anything with SPFT. Apparently this has to do with some kind of "secure boot" mechanism that MediaTeks sometimes have now. There's no stock firmware for this device online from what I can find, nor for the generic version of the device, the Tinno U304AA (AT&T just rebranded it). If I had a stock firmware image, maybe I could risk wiping the partitions and reflashing the stock firmware to get rid of the secure boot stuff.
I saw a guide for how to access the bootloader on the Tinno U304AA generic version, but on the AT&T version of the phone there's no option in the boot select menu (Vol. UP + Power) to get to the bootloader to run a fastboot oem unlock. All the AT&T version has is recovery and normal boot. I'm not sure what I can do to maybe reset this to get the other options. Maybe if I had the stock firmware for the generic version of the phone I could overwrite it and get access to those other options.
Either way, just posting this up for anyone else that got one of these and wants to collaborate/contribute. Maybe with enough collective brainpower we can make something happen.
Click to expand...
Click to collapse
OMG! So excited to see this here! My Mom gave my nephew this phone and niece has one. So I've been trying my best to get the thing to at least be a decent phone! I installed a launcher on it, changed the icons and wallpaper and made it look good at least. It will be nice to have someone to talk to about this. The thing has been beyond frustrating! First off though how did you get the computer to recognize it? I can't get Windows or Linux to recognize it and couldn't find any drivers. If you managed that much you got further than I did. I haven't tried with my nieces though. It might just be his phone. She's 13 so it took awhile to pry it from her long enough to find out what kind it was, but I'm willing to try to get it from her once again if the phone can be improved.

sjjtnj said:
OMG! So excited to see this here! My Mom gave my nephew this phone and niece has one. So I've been trying my best to get the thing to at least be a decent phone! I installed a launcher on it, changed the icons and wallpaper and made it look good at least. It will be nice to have someone to talk to about this. The thing has been beyond frustrating! First off though how did you get the computer to recognize it? I can't get Windows or Linux to recognize it and couldn't find any drivers. If you managed that much you got further than I did. I haven't tried with my nieces though. It might just be his phone. She's 13 so it took awhile to pry it from her long enough to find out what kind it was, but I'm willing to try to get it from her once again if the phone can be improved.
Click to expand...
Click to collapse
Linux should just work, plug in the thing and the "drivers" if you will should be there already. Check the phone's settings for USB Debugging in the Developer Options if there's further trouble.
Don't get me wrong too, this phone is, was, and will always be a piece of junk. There's no getting around a screen this bad and 1GB of RAM. I'm actively trying to find a Download Agent and Auth File combo to get this thing to work with SPFT so I can try to port a custom recovery to get us Magisk root permissions at least. Root will make the phone slightly better, but it will still be junk. Unless we can get kernel source for it as well to mess with things like clock speeds and CPU governors (which LEGALLY we are supposed to be guaranteed, but good luck convincing a Chinese company to give it to you) everything we do, if we CAN do anything, will be like deodorant on a turd. It'll smell a little better, but it's still a turd.

jasonmerc said:
Linux should just work, plug in the thing and the "drivers" if you will should be there already. Check the phone's settings for USB Debugging in the Developer Options if there's further trouble.
Don't get me wrong too, this phone is, was, and will always be a piece of junk. There's no getting around a screen this bad and 1GB of RAM. I'm actively trying to find a Download Agent and Auth File combo to get this thing to work with SPFT so I can try to port a custom recovery to get us Magisk root permissions at least. Root will make the phone slightly better, but it will still be junk. Unless we can get kernel source for it as well to mess with things like clock speeds and CPU governors (which LEGALLY we are supposed to be guaranteed, but good luck convincing a Chinese company to give it to you) everything we do, if we CAN do anything, will be like deodorant on a turd. It'll smell a little better, but it's still a turd.
Click to expand...
Click to collapse
Right, I'm considering giving him my current phone when I get a new one. It doesn't seem like I'm going to be able to unlock and root it so I want a phone I can. Mainly for space personally. He's young so he doesn't need it rooted, but I'm thinking if I can root it then I might be able to use it to root my phone. Speaking of rooting I think I found a way to root this phone. It took me a couple days to get the phone since he said he couldn't find it, but I have it now. It just needs to charge, but the battery sucks so it takes forever. I did find out that it does have a decent recovery. I had booted it into recovery and then I was messing around with the keys after the little passed out green guy popped up and suddenly it loaded stock recovery. It had an option to mount the system and flash with adb and everything. The only problem is I kept booting it by messing with keys. So I honestly don't know which ones worked. I kept booting into it last night by messing with them, but now I can't seem to get it to boot into the right recovery now that I'm trying to figure out the right key combination. I will figure it out though (eventually) and let you know what you have to click, but if you get the chance just mess with it and hopefully you'll find it like I did.
Also I was looking up the phones variants and downloaded a couple stock roms that I felt had all the right specs I'm going to try to flash one if I can get it plugged in. I downloaded custom twrp image's for them as well, and even found one twrp that I was able to download in the app. If you used it then you know that it takes you to a download page if you are downloading the wrong twrp.img. So the fact it let me download it in the app meant it tricked twrp into thinking it was that phone. So I'm going to try that stock rom first. Maybe we'll be able to change it to another model. It really needs something flashed, because it's a mess. I thought he messed it up, but after reading what you said maybe it's just the phone. He's young so it doesn't matter as much to him, but I feel bad for my niece. I really need to look into at least getting her another phone. I'm going to work on it later today and see what I can do. First I got to get it to work on the computer, but I may be able to root it without the computer. I'll keep you updated with my progress.

any luck with this?

Yeh, is there a status update?

Sorry, I got a concussion and haven't been able to do much, but really I'm stuck because I can't get it to connect to the computer at all. Not in Windows or Linux. I think he's messed it up beyond repair at this point. The offline root gave me an error around the mounting of the system, but that can be done if you can get the recovery to show up. It's one of the options. I was trying this method. HERE see if you can get it plugged in and to work. Also, Kingoroot gets to 90% on the apk alone. So the computer app might do the trick. Then you can switch it to su. Really a rooted phone can get a lot done with apps like flashify and flashfire that we can't do right now. If you can get even a temp root let me know and I'll tell you what I found out about the apps to unlock the bootloader, flash TWRP, Flash Magisk, then flash ROMs. If you want to try the variant route I was trying then just do a search on google. Some sound just as bad, but other similar phones seem better. You can pick which one you want to try. The phone I have got to a point that it kept deleting applications and stuff on the phone and has trouble with the sd card. So I don't have the stuff I had saved on it anymore. I'm giving him my current phone when I get a new one. It's too messed up to salvage. I hope you have more luck.

sjjtnj said:
Sorry, I got a concussion and haven't been able to do much, but really I'm stuck because I can't get it to connect to the computer at all. Not in Windows or Linux. I think he's messed it up beyond repair at this point. The offline root gave me an error around the mounting of the system, but that can be done if you can get the recovery to show up. It's one of the options. I was trying this method. HERE see if you can get it plugged in and to work. Also, Kingoroot gets to 90% on the apk alone. So the computer app might do the trick. Then you can switch it to su. Really a rooted phone can get a lot done with apps like flashify and flashfire that we can't do right now. If you can get even a temp root let me know and I'll tell you what I found out about the apps to unlock the bootloader, flash TWRP, Flash Magisk, then flash ROMs. If you want to try the variant route I was trying then just do a search on google. Some sound just as bad, but other similar phones seem better. You can pick which one you want to try. The phone I have got to a point that it kept deleting applications and stuff on the phone and has trouble with the sd card. So I don't have the stuff I had saved on it anymore. I'm giving him my current phone when I get a new one. It's too messed up to salvage. I hope you have more luck.
Click to expand...
Click to collapse
I need to unlock my phone U304AA

Ok boys and girls, in case anyone is still wondering here is how to root this sucker.
https://drive.google.com/file/d/1--Ul1ae73zcejNuJ1a7ftq5sTo2VP8Ya/view?usp=drivesdk
Comes with two files. Mtksu amd magisk be sure to use the magisk version included in the zip. Install mtksu then wmagisk, open mtksu and install the top magisk option. Reboot then open magisk hit install when it asks. Now open mtksu scroll to the bottom and hit activate and reboot again. Should be good too go at this point. Oh yeah be sure to click apply at boot in mtksu. Not sure if this had been posted before or not. Now, to find a way to unlock bootloader and install twrp.

Thank you, I tried Mtksu on mine and it didn't work, but it might've been the phone. I don't have one of these anymore, but I hope you all the best of luck. For the bootloader and Twrp try Flashfire or flashify.

MTK bypass method released by some smart dudes out there. I will test if we can use SPFT on this phone now. Stay tuned. This could mean root & recovery in a matter of minutes.
EDIT: It ALMOST works. Technically it bypassed the auth file as advertised. The only thing left now is finding a compatible preloader/scatter file to use.

Used a modified Moto E6 Play scatter file to pull images from the device. Tried flashing over stuff and got an error. Long story short my U304AA is now permanently bricked, so I'm tapping out of this project here
I do have recovery and boot images that (supposedly) work if anyone else wants to try and take over Keep in mind these were pulled with a scatter file from a DIFFERENT phone that's of the same chipset, so not everything is guaranteed to work. For example, the preloader was pulled with the specified parameters but I do NOT know if it's functional
Because I'm tapping out, and because nobody else seems to have anything on this, I'm uploading everything I can. Some pulls are too big to upload and some just won't work for some reason, but use whatever you'd like for anything you can. Hope I did something helpful

I have searched in Google Search and the tutorials forum but not found a tutorial
_____________
Sent from my website: https://topsanphamhay.com/kem-chong-nang-danh-cho-da-dau-mun.html - https://topsanphamhay.com/kem-chong-nang-innisfree-perfect-uv-protection-cream-co-tot-khong.html - https://topsanphamhay.com/kem-chong...ifying-face-fluid-dry-touch-co-tot-khong.html using Iphone X

Well AT&T is giving away lots of Radiant Core devices because of their 3G shutdown: https://www.xda-developers.com/att-3g-shutdown-free-phone/
My wife and I just got one, so now I have two of these but I'm not sure I trust AT&T enough to use the "free" phone that they sent.
It would be great if someone can pickup this project, especially since so many phones are now flooding the market.

I just got 3 of these "free" from AT&T. In fact I don't really need them, I just happen to have phones with an IMEI number that AT&T cannot decipher, so they sent me new phones just in case I can't use 4G.
Anyway, I'm trying to use mine as spare Google assistants scattered around the house, but because they run that crappy Android Go, the Go version of Assistant won't listen to me until I long-press the home button. I would also like to use them when I travel as a spare.
These things are essentially throw-away, so I'm OK to risk bricking one of them.
What I really want to do is install a real version of Android on here, has anyone managed to crack this yet?

I personally have been writing and reading using this tool https://github.com/bkerler/mtkclient, which is much simpler than the others
Its a little rough around the edges, but it certainly works
My final problem is disabling secure boot (I already have a boot.img patched with magisk)
It appears that fastboot is simply not a mode for booting on this model, so I was wondering if anyone knows how to disable AVB by hand with just partition images

kayshinonome said:
I personally have been writing and reading using this tool https://github.com/bkerler/mtkclient, which is much simpler than the others
Its a little rough around the edges, but it certainly works
My final problem is disabling secure boot (I already have a boot.img patched with magisk)
It appears that fastboot is simply not a mode for booting on this model, so I was wondering if anyone knows how to disable AVB by hand with just partition images
Click to expand...
Click to collapse
if it's possible to downgrade the firmware to before the october 2019 patch, it might be possible to mtk-su the device: https://www.att.com/device-support/article/wireless/KM1376142/ATT/ATTU304AA
might be another alternative to trying to disable avb on a locked bootloader

luridphantom said:
if it's possible to downgrade the firmware to before the october 2019 patch, it might be possible to mtk-su the device: https://www.att.com/device-support/article/wireless/KM1376142/ATT/ATTU304AA
might be another alternative to trying to disable avb on a locked bootloader
Click to expand...
Click to collapse
Not possible to do, already tried before when I didn't brick it

KJ7LNW said:
Well AT&T is giving away lots of Radiant Core devices because of their 3G shutdown: https://www.xda-developers.com/att-3g-shutdown-free-phone/
Click to expand...
Click to collapse
Just got mine from this. I'd like to install something like NixOS mobile, but I've never used an android phone before. Will that be possible on this phone? If so, is there a good guide for newbs like myself?