I tried to root my Moto G5s+ to install a more lightweight ROM.
I reset my phone and didn't even add a pin.
Unlocking the bootloader worked
Then I tried to install TWRP, it failed 3 times
Then I tried to boot the phone, it asked for a password
I didn't even add a password
When I tried to go into recovery mode, it said "No Command"
So i can't even use my phone now, Atleast it was my alt phone.
Look inside here:
How to Fix Android Recovery Mode No Command Error
The no command Android error has popped up for many users when in the recovery mode. But before we start, lets understand why it exists.
www.wawcase.com
At the no command screen press and HOLD the volume up and power key together and once you see the recovery menu release the keys.
Related
Dear All,
Please help me regarding fastboot. When I press 3 keys (vol-up, vol-down and power key) while phone is off. I see the black and white screen written boot modes. From there when I select AP Fastbood device is restart with red Motorola logo and end up on home screen.. I have tried several times to turn off the device and repeat this process but no issue still there..
Moreover, if I did not select any options from boot modes than device automatically rebooted after 3 or 4 seconds..
Please help me out.. I want to unlock the boot loader root and install custom ROM..
Currently Model Number is XT925 and device is completely stock.. never rooted before...
thanks and regards,
akkay1 said:
Dear All,
Please help me regarding fastboot. When I press 3 keys (vol-up, vol-down and power key) while phone is off. I see the black and white screen written boot modes. From there when I select AP Fastbood device is restart with red Motorola logo and end up on home screen.. I have tried several times to turn off the device and repeat this process but no issue still there..
Moreover, if I did not select any options from boot modes than device automatically rebooted after 3 or 4 seconds..
Please help me out.. I want to unlock the boot loader root and install custom ROM..
Currently Model Number is XT925 and device is completely stock.. never rooted before...
thanks and regards,
Click to expand...
Click to collapse
After you use the volume down key to highlight "Fastboot", do you then press the volume up key to select it? If you just sit there and wait it will reboot normally. You must press the volume up key after you've highlighted the menu option.
akkay1 said:
Dear All,
Please help me regarding fastboot. When I press 3 keys (vol-up, vol-down and power key) while phone is off. I see the black and white screen written boot modes. From there when I select AP Fastbood device is restart with red Motorola logo and end up on home screen.. I have tried several times to turn off the device and repeat this process but no issue still there..
Moreover, if I did not select any options from boot modes than device automatically rebooted after 3 or 4 seconds..
Please help me out.. I want to unlock the boot loader root and install custom ROM..
Currently Model Number is XT925 and device is completely stock.. never rooted before...
thanks and regards,
Click to expand...
Click to collapse
try this,
-install adb on your pc
-plug in phone when powered up
- open a command prompt in your adb dir
- type in: adb devices then enter. it should show your phone in the prompt. also check your phone, there may be a popup to acknowledge.
- rerun adb devices until it shows your phone properly or you cant proceed
-now type in: adb reboot bootloader
if it works, the phone should reboot to the fastboot screen.
if it doesnt stick in fastboot, im sorry but i dont know what else to tell you to try.
Thank-you for the Response
bweN diorD said:
try this,
-install adb on your pc
-plug in phone when powered up
- open a command prompt in your adb dir
- type in: adb devices then enter. it should show your phone in the prompt. also check your phone, there may be a popup to acknowledge.
- rerun adb devices until it shows your phone properly or you cant proceed
-now type in: adb reboot bootloader
if it works, the phone should reboot to the fastboot screen.
if it doesnt stick in fastboot, im sorry but i dont know what else to tell you to try.
Click to expand...
Click to collapse
Thankyou so much for the reply, i followed your instructions and finally get in fastboot mode and unlocked the boot loader. However, is there any way from which I can go into recovery.. because through hardware way I am unable to go in recovery. Thanks
EDIT: I have tried entering command adb reboot recovery, then phone was rebooted and there was green android on screen with chest open.. thats it... i have waited for few minutes and rebooted the device mannually.
akkay1 said:
Thankyou so much for the reply, i followed your instructions and finally get in fastboot mode and unlocked the boot loader. However, is there any way from which I can go into recovery.. because through hardware way I am unable to go in recovery. Thanks
EDIT: I have tried entering command adb reboot recovery, then phone was rebooted and there was green android on screen with chest open.. thats it... i have waited for few minutes and rebooted the device mannually.
Click to expand...
Click to collapse
That's the entry to stock recovery. You have to push a combination of buttons from there to get into recovery. I forget the button combination, it has been posted many times, try searching or wait for someone else to jump in with the answer.
Sent from my LG-VS980 using XDA Premium 4 mobile app
Not sure where to post this question been reading so many post my eyes are tired......
- XT926 upgraded to kitkat 183.46 last week via flash in RSD from JB 4.1.2
- Root went well DONE (Towel root .apk)
- Unlock went well DONE (Motopocalypse .apk) yes fastboot shows the #3
- Flashed TWRP 2.7.1 DONE (did it using the adb in motopocolypse)
- Backed up my current stock ROM in TWRP seemed to go well the program confirmed the backup was successful...So I thought
- Got confident and wanted to try flashing CM11 (Kitkat version)
- After flashing CM11 my phone got stuck at boot like many others have.... no problem I backed up my stock ROM in TWRP.....So I thought
- Went to restore my stock ROM using TWRP and yup you guessed it like many others the restore failed half way through
Not a big deal starting fresh can be a good thing BUT I really need my old text messages and all I have is a USB backup of the phone (Internal/SDcard) on my PC and of course the TWRP back-up on the SDcard that won’t restore ...... Is there any way to get these messages back to my phone????
wonka144 said:
Not a big deal starting fresh can be a good thing BUT I really need my old text messages and all I have is a USB backup of the phone (Internal/SDcard) on my PC and of course the TWRP back-up on the SDcard that won’t restore ...... Is there any way to get these messages back to my phone????
Click to expand...
Click to collapse
Not sure how to help you with your immediate problem at hand, but going forward, I definitely recommend the sms backup + from the Google Play Store. Nice thing with that app is, you can link it to your gmail account, and all your text messages are backed up to your gmail.
While i was trying to install the latest official rom to my device (The new Padfone Infinity A86 T004) it is bricked, Now i am facing a very bad (miserable) situation.
When turning on the device it shows me the ASUS logo and in top of the screen a message says : ERROR: Can not boot Invalid boot image!!
And my big problem is that i can't access any of ADB, recovery mode or even fastboot. the phone is undetectable by my PC at all.
I don't know how to force fastboot ... if i can reach the beautiful fastboot mode i will be able to handle the next steps in the fixing journey.
I have red that as long as the device shows something it means that it is not totally bricked .. but how to get out of this situation?
Any suggestions ?
Sorry my englsih is´nt good.
So you can´t broken your phone with OTA Updates
You can delet all files and sysfile and the asus isn´t broken.
you just need patience.
make sure you have the correct driver
turn off your phone,
press vloume up and power, so the phone stay with boot logo, so you are in the fastboot mode.
there you can use my exploit btw the howto downgrade A86, but the downgrade dosent works.
so unzip the newest rom .zip out of asus page....
copy the boot.img and recovery.img in your minimal fast adb folder
so you can:
c:\ADB>fastboot -w ( really wipe all partions and data of your phone!)
c:\ADB\fastboot flash boot boot.img
c:\ADB>fastboot flash recovery recovery.img
copy the complete OTA Update Zip on your phone (internal sd or external is matter)
reboot phone and install the zip out of recovery.
there may be errors come to the first, if that should be the case
then repeat the case up to 3 times
I hope you can read and understand it .
if you need further assistance , please contact me at any time , like even on my homepage lange23.de
BerayekZ said:
While i was trying to install the latest official rom to my device (The new Padfone Infinity A86 T004) it is bricked, Now i am facing a very bad (miserable) situation.
When turning on the device it shows me the ASUS logo and in top of the screen a message says : ERROR: Can not boot Invalid boot image!!
And my big problem is that i can't access any of ADB, recovery mode or even fastboot. the phone is undetectable by my PC at all.
I don't know how to force fastboot ... if i can reach the beautiful fastboot mode i will be able to handle the next steps in the fixing journey.
I have red that as long as the device shows something it means that it is not totally bricked .. but how to get out of this situation?
Any suggestions ?
Click to expand...
Click to collapse
Thank you for your help.
The issue is that the phone now is not detected by the pc at all , i can not access the fast boot ...
Do you really pressed Volume up and Power at the same time, if startet???
If the phone during normal start at the stops bootlogo that's not fastboot!!!
Turn really off an than hold volume up an press Powerbutton, hold it up to boot logo.
then you are really in fastboot mode!
BerayekZ said:
Thank you for your help.
The issue is that the phone now is not detected by the pc at all , i can not access the fast boot ...
Click to expand...
Click to collapse
after turning off
when i press volume up + power button the phone vibrates and the asus logo displayed. then i release power button and keep pressing volume up button => and after 1 second an error appears ERROR: Can not load Invalid boot image!!
when pressing power button + volume down button a menu appears with two options 1.Enter recovery mode and 2.Exit update mode.
when choosing option 1 , the menu disappeared and the asus logo appears without the previous error message.
when choosing option 2 , the the menu disappeared and the asus logo appears and the previous error message.
all these cases the phone didn't go to fastboot mode and never detected by the pc.
when i press volume up + power button the phone vibrates and the asus logo displayed. then i release power button and keep pressing volume up button don´t keep pressing volume up,
fasboot mode only power & up, until the logo. Pressing this two to logo and then left them. the logo sty tuned in display so you re in fastboot
if you pressing up too jump in question menü,
if you pressing at startup power & down jumped directly into question menü, but this menü is wrong for you. you need only fastboot nothing more
BerayekZ said:
after turning off
when i press volume up + power button the phone vibrates and the asus logo displayed. then i release power button and keep pressing volume up button => and after 1 second an error appears ERROR: Can not load Invalid boot image!!
when pressing power button + volume down button a menu appears with two options 1.Enter recovery mode and 2.Exit update mode.
when choosing option 1 , the menu disappeared and the asus logo appears without the previous error message.
when choosing option 2 , the the menu disappeared and the asus logo appears and the previous error message.
all these cases the phone didn't go to fastboot mode and never detected by the pc.
Click to expand...
Click to collapse
keep pressing on volume up button is not jumping in question menü, but shows logo + error message (can not load invalid boot image)
also pressing them to logo then releasing also shows logo + the error message.
i am also uploading a video to youtube to verify..
https://youtu.be/uw4Esyppq_c
and without recovery its right?
And with error message and logo your pc find nothing new unkown devices?
CMCC Composite ADB Interface?
?
BerayekZ said:
https://youtu.be/uw4Esyppq_c
Click to expand...
Click to collapse
Yes, no recovery
And yes PC does not find any new devices
I can not understand it...
I once the boot.img deleted in the phone and also get such error message .
but my systems find an Android device and i can use the fastboot
Any way , a good news that the phone was only few days out of its package and i managed to return it back to the seller and will send to me a new one.
But i am really disappointed with ASUS not to make any unlock tool for the new padfone infinity.
Once, i believed that as long as there is no physical damage in the phone, there will be always a way around to fix it by fastboot. but it discovered that it is not correct and the fast boot itself can be damaged..
Any way thank you so much the only man helped me here sinus23.
I got this problem too
Me too
I got this problem
guys you got to do this , i am having yureka plus5510a no fastboot no recovery
bros no recovery no fastboot boot loop tried all combination not charging nothing what you think you guys are genius give me some let me tell you the whole thing how i ended here .. its all started with the king root(worst decision ) i wanted to flash twrp in my yu yureka plus 5510a no idead what " A" stands for then i used flashify from playstore and downloaded the twrp by the official twrp and flashed it with the flashify and boom boot stuck with no recovery some how removing battery and connecting the phone goes to the charging disp from where i did enable the fast boot but cmd was not able to identify adb devices nor the flashboot commands were working so i did same with win 10 powershell but nothing no devices , so i decided to use a method of ygdp , much hopes with this used ***** 5.1.153.00.P0.160604.8675_I02.def.CPB ******* dont know where the log file is but it was showing old bootloader error downloading and error and error and terminated at 2 % , then this one of your thread by unziping the official files and clicking on flash-all.bat file which he provided img(1) "some trials your phone will be all right " i tried with some "waiting devices error " message but then it just started something happened oem unlock blah_blah and then successful , tried to boot again but this time phone was automatically jumping into fastboot mode , then i finally tried one last time in that power shell thing by typing using cmd and applied fastboot code , even no devices was showing in powershell ,, but then i used some different code something like "fastboot ix902 recovery " and i was able to install a real old twrp recovery.. phone was showing the cyanogen loading ....but later after 1 hour i felt its stuck = + = but luckily recovery was working but but dont know why the buttons setup used to go in fastboot mode was now taking me in recovery,, and fastboot was no longer acessable , i was fine with it so i downloaded latest recovery from your respected thread file named as " twrp-3.0.2-0-20160604-UNOFFICIAL-tomato.img " i wanted to install nougat aosp so i thought its a nice idea to update the recovery first i. so i did the normal recovery update from the recovery it self , and now i guess that recovery was so old , the new one was kinda mindblower for the older one and booom no recovery , no fastboot , tried all the combination and came up with this one volume+ vol- and power shown img (2) same as boot logo but a small "official" tag
pls help i know this post dont suits your professional level , right now i havent slept from kinda like three days cause of exams and this sarcasm of being in trouble.. like my every devices is rooted o in onyx m in tab 2 , it frustating pls help ........i will edit this and make it more polite but if you are one who can solve this .. i am ready to donate man. cause u deserve it , it will gonna be learning experience with you i will be totally into the reply and pls dont scream for drivers i did installed coolpad driver adb drivers everything required i feel yureka is a real fake company their parts isnt distinguishable i did al the steps nicely and cleanly except the (kingroot ) and pls dont brag about the old threads , they didnt helped me much.. and probably why my phone is kinda dead
Hello, I came to this forums looking to get some help with a device that a friend gave me to fix. He tried to install some sort of custom ROM on his phone (Moto E XT1527), and after installing it, Im not totally sure what did he touch, but now the phone only boots up to a screen saying the following:
AP Fastboot Flash Mode (Secure)
BL: 80.0B (sha-2c9fcbc 2015-03-13 20:15:21)
Baseband: Not Available
Product/Variant: surnia XT1527 8GB P3
Serial Number: T00930M5JK
CPU: MSM8916 ES1. 0
eMMC: 8gb Samsung RV=07 PV=01 TY=57
DRAM: 1024MB Samsung S8 SDRAM DIE=4GB
Console [NULL]: null
Battery Ok
Device is LOCKED. Status Code: 2
Software status: modified
Transfer Mode: USB Connected
Click to expand...
Click to collapse
(There could be some sort of typo on it)
So far I have tried with a tool that suposedly would flash a ROM into the phone without typing any commands, but it failed at some point.
As for unlocking the bootloader, I was abble to obtain the code, yet when I try to unlock it via fastboot, it says that I need the permission to "Allow OEM Unlock", wich I can't grant because of the SO not booting.
Regarding to what my friend did with it, he's not sure, but he think he deleted some sort of file
Im not an expert on this kind of stuff, yet I can follow steps that are given to me to provide any info or to execute a fix, so I would appreciate any kind of help from you to diagnose and solve this problem
Thanks in advance
A little bump
Javier14 said:
Hello, I came to this forums looking to get some help with a device that a friend gave me to fix. He tried to install some sort of custom ROM on his phone (Moto E XT1527), and after installing it, Im not totally sure what did he touch, but now the phone only boots up to a screen saying the following:
(There could be some sort of typo on it)
So far I have tried with a tool that suposedly would flash a ROM into the phone without typing any commands, but it failed at some point.
As for unlocking the bootloader, I was abble to obtain the code, yet when I try to unlock it via fastboot, it says that I need the permission to "Allow OEM Unlock", wich I can't grant because of the SO not booting.
Regarding to what my friend did with it, he's not sure, but he think he deleted some sort of file
Im not an expert on this kind of stuff, yet I can follow steps that are given to me to provide any info or to execute a fix, so I would appreciate any kind of help from you to diagnose and solve this problem
Thanks in advance
Click to expand...
Click to collapse
it can be simply solved ....if you are able to boot to fast boot mode
HOW TO BOOT INTO FAST BOOT
First of all, you have to power off your Moto E.
In order to do so, press power button once and then select “power off” or keep pressing the power button for about 15 seconds.
Wait a few seconds until applying the next step.
After powering off your phone, press power button and volume down key at the same time.
Keep pressing these buttons for about 6, or 7 seconds.
Release the keys when the fastboot / bootloader mode is being displayed.
In fastboot use volume up and volume down keys in order to scroll up and down within bootloader menu and press power button in order to select your option.
if it enters fast boot mod unlock boot loaders ....when it says grant permission using volume up or down button
then flash a custom recovery ...make a factory data reset after you flash custom recovery .....
after all above steps flash any custom rom this will fix all your issues ... you can also try to flash stock rom images via fast boot
Adi Shakthi said:
it can be simply solved ....if you are able to boot to fast boot mode
HOW TO BOOT INTO FAST BOOT
First of all, you have to power off your Moto E.
In order to do so, press power button once and then select “power off” or keep pressing the power button for about 15 seconds.
Wait a few seconds until applying the next step.
After powering off your phone, press power button and volume down key at the same time.
Keep pressing these buttons for about 6, or 7 seconds.
Release the keys when the fastboot / bootloader mode is being displayed.
In fastboot use volume up and volume down keys in order to scroll up and down within bootloader menu and press power button in order to select your option.
if it enters fast boot mod unlock boot loaders ....when it says grant permission using volume up or down button
then flash a custom recovery ...make a factory data reset after you flash custom recovery .....
after all above steps flash any custom rom this will fix all your issues ... you can also try to flash stock rom images via fast boot
Click to expand...
Click to collapse
Hello and thanks for your answer. I have managed to get into fastboot mode, yet I still can't unlock the bootloader. It stills asks me to grant OEM permissions. Is there any way to grant it without booting into the SO?
I have managed to get the PCeU Ransomware onto my Tab and now when I turn it on i immediately get the splash page asking me to pay up.
No matter what i do to try to get into Safemode or Recovery Mode it is no good I simply get the splash page up which prevents me getting any further in my attempts to remove it.
Any suggestions would be gratefully appreciated.
I forgot to add that the usual method of getting into recovery is as far as I know the power button and volume up after turning the device off first (I have tried up and down volume as well)....i feel however that the device never completely turns off as when I hit the turn off option on the lock screen it shuts down but i dont feel the vibration that i used to get when it did this.
Trasnadunta said:
I have managed to get the PCeU Ransomware onto my Tab and now when I turn it on i immediately get the splash page asking me to pay up.
No matter what i do to try to get into Safemode or Recovery Mode it is no good I simply get the splash page up which prevents me getting any further in my attempts to remove it.
Any suggestions would be gratefully appreciated.
I forgot to add that the usual method of getting into recovery is as far as I know the power button and volume up after turning the device off first (I have tried up and down volume as well)....i feel however that the device never completely turns off as when I hit the turn off option on the lock screen it shuts down but i dont feel the vibration that i used to get when it did this.
Click to expand...
Click to collapse
Try to force reboot recovery by using "adb reboot recovery" and wipe data and cache from here. If you want you can save data from TWRP
Greets
If you can get to download mode and reflash stock rom, it might work!
Cant get to download mode unfortunately. Is there any idiots guides for instructions for "adb reboot recovery"?
Scratch the above.. I found the above and was able to run the command prompt but the device does not appear to be found and when any command is run i get error: device '(null)' not found.
I can see the files on the device in Windows explorer however so would have assumed the drivers when correct.
I suspec the issue is that I cant get into usb debug because i cant get past the blasted ransomware splash screen.
Trasnadunta said:
Cant get to download mode unfortunately. Is there any idiots guides for instructions for "adb reboot recovery"?
Scratch the above.. I found the above and was able to run the command prompt but the device does not appear to be found and when any command is run i get error: device '(null)' not found.
I can see the files on the device in Windows explorer however so would have assumed the drivers when correct.
I suspec the issue is that I cant get into usb debug because i cant get past the blasted ransomware splash screen.
Click to expand...
Click to collapse
Hard boot into recovery and then factory reset. Vol Up + Power until screen pops up then keep holding just volume up.
Dear Friends,
Please let me know if this post is in the wrong place.
I have an issue with my Moto G7 power, I restarted it and it asks for pattern access (to start up the phone and activate the finger print), I entered the pattern multiple times (I guess that I forgot my pattern) and it didn't accept it.
I tried to do the factory wipe, I can login to bootloader and when I select factory mode it will just boot again. And if I select recover mode then it shows a dead android with a red triangle and NO Command.
I would need your advice and guidance.
Thanks
a80li said:
Dear Friends,
Please let me know if this post is in the wrong place.
I have an issue with my Moto G7 power, I restarted it and it asks for pattern access (to start up the phone and activate the finger print), I entered the pattern multiple times (I guess that I forgot my pattern) and it didn't accept it.
I tried to do the factory wipe, I can login to bootloader and when I select factory mode it will just boot again. And if I select recover mode then it shows a dead android with a red triangle and NO Command.
I would need your advice and guidance.
Thanks
Click to expand...
Click to collapse
press power and volume up key on that no command screen to enter stock recovery or
using fastboot command - fastboot erase userdata
Works!
Thanks alot, works now. I already tried this but might be a bit in hurry.