which pint need to connect for edl test point?
galaxy94 said:
which pint need to connect for edl test point?
Click to expand...
Click to collapse
Hello, i would also need this info. Did you found out?
Redmi 9A test ponit
Good day sir! Can you please send a tutorial on how to download recovery using the edl tespoint on redmi 9a.
Thank you...
ju dy said:
Good day sir! Can you please send a tutorial on how to download recovery using the edl tespoint on redmi 9a.
Thank you...
Click to expand...
Click to collapse
Download recovery??? If you want to install recovery you need fastboot enabled. If your phone is bricked try flashing with Sp Flash Tool, there are so many tutorials on YouTube.
galaxy94 said:
which pint need to connect for edl test point?
Click to expand...
Click to collapse
You mean tool for test point? Everything can do if that tool support deliver electrical, i used cable, u just need release batteray socket first before do it.
Related
Hello, everyone,
I've buy a mi4c for my sisters and it arrived with a multilanguange bad rom... so like with my other devices I try to change my rom, and I do a big error...
-I reboot to edl (with adb command) flash the fastboot rom with miflash , no error but now my phone stay black....
I find that here in an other topic : http://en.miui.com/thread-170110-1-1.html
Do you think that will work ? else do you have another solution ?
qualcomm driver is working but nothing else....
hold the power button for 8s
Try to use miflash to do that again.
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Sakura_Sa233 said:
Try to use miflash to do that again.
Click to expand...
Click to collapse
Retry same if my phone couldn't go to fastboot ?
jordandroid64 said:
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Retry same if my phone couldn't go to fastboot ?
Click to expand...
Click to collapse
Do you know 8009 mode？
Sakura_Sa233 said:
Do you know 8009 mode？
Click to expand...
Click to collapse
No, it's when the qualcomm driver appear ?
jordandroid64 said:
No, it's when the qualcomm driver appear ?
Click to expand...
Click to collapse
You can search it in Google .
Sakura_Sa233 said:
You can search it in Google .
Click to expand...
Click to collapse
I have seen this is mode which permit to repair a qualcomm device brick... But there are tutorials for device really complicated...
But i will try with miflash like you said
Hey,
I had reconnect it to reflash by miflash and now the led is blinking red but qualcomm driver diseappear
edit : MI4c work now ! thanks !
Please if someone can look out for the msmtool for 5G version
thanks
Any joy on getting this? My phone appears to be really bricked!
iang123 said:
Any joy on getting this? My phone appears to be really bricked!
Click to expand...
Click to collapse
Can you get into fastboot at all?
liam_davenport said:
Can you get into fastboot at all?
Click to expand...
Click to collapse
I could, but now it's just a blank screen and I keep getting "USB Device malfunctioned" I think it's done for
iang123 said:
I could, but now it's just a blank screen and I keep getting "USB Device malfunctioned" I think it's done for
Click to expand...
Click to collapse
Contact OnePlus they might be able to help you with a tool that can revive it.
liam_davenport said:
Contact OnePlus they might be able to help you with a tool that can revive it.
Click to expand...
Click to collapse
I can get into fastboot mode now. Can I do anything from here?
iang123 said:
I can get into fastboot mode now. Can I do anything from here?
Click to expand...
Click to collapse
Visit this thread: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Download the fastboot rom for your model and run the flash all bat
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
How this happen to you???
What wrong you did?
Sent from my Redmi Note 7 Pro using Tapatalk
Go to service center they can help now your device will falashed by official id by mi flashtool
gautamajay52 said:
How this happen to you???
What wrong you did?
Sent from my Redmi Note 7 Pro using Tapatalk
Click to expand...
Click to collapse
Rooted without unlock bootloader ..
Grajatyadav said:
Go to service center they can help now your device will falashed by official id by mi flashtool
Click to expand...
Click to collapse
I'm going there
Mi authorised service center they
said motherboard complaint and return the product ..
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
How it happened ... elaborate it...
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
Try EDL mode or Get it to care. IG
sourav24071999 said:
How it happened ... elaborate it...
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
Try EDL mode or Get it to care. IG
Click to expand...
Click to collapse
Actually trying to root and installed twrp..
Then i flash custom rom.
After that phone doesn't turn on..
Showing only in pc Qualcomm 9008 mode.
When i try to flash with mi flash tool they ask me authentication .. i enter username and password but its not working bro .. any method to fastboot mode ? I tried all method but its not working ???
jishnukollam said:
Actually trying to root and installed twrp..
Then i flash custom rom.
After that phone doesn't turn on..
Showing only in pc Qualcomm 9008 mode.
When i try to flash with mi flash tool they ask me authentication .. i enter username and password but its not working bro .. any method to fastboot mode ? I tried all method but its not working
Click to expand...
Click to collapse
Try EDL mode .. also nxt time just follow proper guidance for root ... Stay updated to violet community discussion in tg
Tg channel link ?
From kerala.
jishnukollam said:
Tg channel link ?
Click to expand...
Click to collapse
Bro i'm from kerala.
You cant flash in edl mode.
it requires mi authorized login.
It happened to me also. Hard brick not turning on.
Just went to service center and told phone bricked in between update process.
So they repair it within 1 hour.
Its the only way i know possible.
MOD EDIT: Telegram link removed, read the STICKY!
Redmi Note 7 Pro Hard Bricked
Not turn On
only show Qualcomm HS-USB QDLoader 9008
No display
What can i do...
{Note: I have trying to boot patch in umt by select model: redmi note 7.. After that phone is bricked..}
Please help me...
Redmi note 7pro 100% working process
My mobile is redmi note 7 pro I tried to install twrp and bricked(soft) 10 times after all i installed it to show twrp whoami and after some bricks successfully installed magisk
//My opinion: if you are not a geek don't try twrp instead flash orangefox recovery it has inbuild magisk installer "warn you don't install disable-dmvariety-forceencryption. zip = otherwise bootloop"//
##Power users: without disable encryption changing anything in system leads to bootloop don't uninstall system apps (disable encryption works in twrp you need that method contact me in"[email protected]")##
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
is it working now ?
My Redmi 6 was Hard Bricked by installing the wrong TWRP (check out the other posts that describe this problem) and none of the solutions mentioned worked for me; then recently I discovered that most of the other Xiaomi/Redmi phones have what's called "EDL Mode", or Test Point Mode which let's you repair a Hard Bricked device even with a locked bootloader. Does anyone know if this mode can be activated on this device (and if so, with which points on the device)?
Mtk does'nt have edl mode (and maibi test poin too)
U need mi auth account to unbrick
wulan17 said:
Mtk does'nt have edl mode (and maibi test poin too)
U need mi auth account to unbrick
Click to expand...
Click to collapse
How would I unbrick it with a Mi Auth Account?
Yoss Roness said:
How would I unbrick it with a Mi Auth Account?
Click to expand...
Click to collapse
go to an authorized service center
burzaa4 said:
go to an authorized service center
Click to expand...
Click to collapse
No, say I had access to a Xiaomi Auth Account - how would I go about fixing the phone?
Yoss Roness said:
No, say I had access to a Xiaomi Auth Account - how would I go about fixing the phone?
Click to expand...
Click to collapse
In my opinion, you do not have because if you had an authorized account, you would know how to probably inform them how to repair phones. If you have a fastboot, you will repair the phone with the mi falsh program.
If you don't have a fastboot, then the spFlash tool will put Da and scatter and auth file there, if the error Status brom cmd fail (0xC00600005) means that you do not have permission to repair it and you will practically not repair it yourself. See thread Hard Brick redmi 6, no Fastboot mode.If I am wrong, somebody correct me.
burzaa4 said:
In my opinion, you do not have because if you had an authorized account, you would know how to probably inform them how to repair phones. If you have a fastboot, you will repair the phone with the mi falsh program.
If you don't have a fastboot, then the spFlash tool will put Da and scatter and auth file there, if the error Status brom cmd fail (0xC00600005) means that you do not have permission to repair it and you will practically not repair it yourself. See thread Hard Brick redmi 6, no Fastboot mode.If I am wrong, somebody correct me.
Click to expand...
Click to collapse
I read somewhere that MediaTek has a test point equivalent, gold points, and then I saw this video. Would this fix my Redmi 6?
Yoss Roness said:
I read somewhere that MediaTek has a test point equivalent, gold points, and then I saw this video. Would this fix my Redmi 6?
Click to expand...
Click to collapse
See here https://4pda.ru/forum/index.php?showtopic=907017&st=7120 There is a lot more about redmi 6. What you show is a total demolition of the phone. All forums (hovetek, gsmdevelopers, 4pda, xda, miui etc. ) say that you can't fix it yourself, you need to find someone with a service account. If it were otherwise they would have written somewhere about it and not immediately showed it. Don't look for a solution on youtube because it's the same fake.
burzaa4 said:
See here https://4pda.ru/forum/index.php?showtopic=907017&st=7120 There is a lot more about redmi 6. What you show is a total demolition of the phone. All forums (hovetek, gsmdevelopers, 4pda, xda, miui etc. ) say that you can't fix it yourself, you need to find someone with a service account. If it were otherwise they would have written somewhere about it and not immediately showed it. Don't look for a solution on youtube because it's the same fake.
Click to expand...
Click to collapse
Thanks bro, that russian site led me to miflashpro.com and that tool did everything I needed. It helped me flash the stock rom (zip file, not fastboot) in recovery.
I had this problem: "system destroyed" message after upgrade gone wrong, no unlocked bootloader, no Mi account on the phone, USB debugging turned off. Been struggling with this for a week, nothing worked until I found miflashpro.
Fritzzie said:
Thanks bro, that russian site led me to miflashpro.com and that tool did everything I needed. It helped me flash the stock rom (zip file, not fastboot) in recovery.
I had this problem: "system destroyed" message after upgrade gone wrong, no unlocked bootloader, no Mi account on the phone, USB debugging turned off. Been struggling with this for a week, nothing worked until I found miflashpro.
Click to expand...
Click to collapse
Can you write a procedure using miflashpro?
I have the same problem.
i was into open beta 13 oneplus 7 and flashing fastboot stable oos from pc bricked my phone into crashdump mode. i tried everything , i cant download msmtool as its megashare file fails always at 99 percent. m not sure whether i can use androiod 9 msm tool too. and there in no proper guide available for OP7 :crying:
if anybody could please provide me with proper instructions and proper files in detail . i ve the adb and qualcomm driver installed properly. i just need the proper links and proper instructions and it will be great help . somebody. as all oneplus services centres are closed here in jaipur and i cant go to delhi. pls peeps somehelp
Hello!
I used this MSMdownloadtool from Androidfilehost: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Flashing instructions:
Press Vol (+) Vol (-) and connect the phone to the PC.
You need to connect the Device very quickly after setting it in EDL Mode and then start MSMdownloadTool otherwise
the device will just restart again after a few seconds from EDL Mode so perhaps best to start MSMdownloadTool
already before connecting the phone so that it will pick up the connection directly when it is in EDL mode.
Good luck. Hope I could help you out here.
please provide detailed instruction if u can
Wishmasterflo said:
Hello!
I used this MSMdownloadtool from Androidfilehost: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Flashing instructions:
Press Vol (+) Vol (-) and connect the phone to the PC.
You need to connect the Device very quickly after setting it in EDL Mode and then start MSMdownloadTool otherwise
the device will just restart again after a few seconds from EDL Mode so perhaps best to start MSMdownloadTool
already before connecting the phone so that it will pick up the connection directly when it is in EDL mode.
Good luck. Hope I could help you out here.
Click to expand...
Click to collapse
i ll see if it works
Wishmasterflo said:
Hello!
I used this MSMdownloadtool from Androidfilehost: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Flashing instructions:
Press Vol (+) Vol (-) and connect the phone to the PC.
You need to connect the Device very quickly after setting it in EDL Mode and then start MSMdownloadTool otherwise
the device will just restart again after a few seconds from EDL Mode so perhaps best to start MSMdownloadTool
already before connecting the phone so that it will pick up the connection directly when it is in EDL mode.
Good luck. Hope I could help you out here.
Click to expand...
Click to collapse
is the msmtool file included in these tool files?
robo660660 said:
is the msmtool file included in these tool files?
Click to expand...
Click to collapse
Yes it is.
Wishmasterflo said:
Yes it is.
Click to expand...
Click to collapse
the files r not extracteable completely. it says two files archive is corrupted
Thanks a lot brother it worked finally. Thanks owe u man ?????????
robo660660 said:
Thanks a lot brother it worked finally. Thanks owe u man ?????????
Click to expand...
Click to collapse
Great to hear. ?