Database Info

Loud vibration normal?

Hey guys!
I recieved my SM2 today and I was a bit shocked how loud the vibration is.
Is it normal that it's clearly audible or do I have a faulty unit?

This is normal, mine does the same. You're sure you won't miss a message

Alright... not what I expected. So I have to turn off vibration once I'm in a meeting. Inconveniant.

Mine was very loud too but I realised it was the metal strap making the noise. I replaced it with a 24mm NATO strap and it's barely audible now.

MrCetirizine said:
Mine was very loud too but I realised it was the metal strap making the noise. I replaced it with a 24mm NATO strap and it's barely audible now.
Click to expand...
Click to collapse
Same here :good:

When I just received SW2 and place it on over the table, i was shocked by its vibration "zi----"
I Also notice that it is come from between the metal strap and SW2, so i paste some tape over there to lower vibration sound.

Interesting! I really like the metal strap though.
aseeme555076 said:
When I just received SW2 and place it on over the table, i was shocked by its vibration "zi----"
I Also notice that it is come from between the metal strap and SW2, so i paste some tape over there to lower vibration sound.
Click to expand...
Click to collapse
Do you have a picture of where you placed the tape?

Paschinski said:
Interesting! I really like the metal strap though.
Do you have a picture of where you placed the tape?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Passed two layers of tape.
But tape always fall out there, and vibration became loud as usual.

aseeme555076 said:
Passed two layers of tape.
But tape always fall out there, and vibration became loud as usual.
Click to expand...
Click to collapse
Interesting watch face. Is that a custom one downloaded, and is that displaying seconds on the lower right?
re: noise. I don't find it too noisy. I do also like the look of the metal band but I may also look at either a nato or leather band, since the metal band does occasionally grab at arm hairs.

Nomad1600 said:
Interesting watch face. Is that a custom one downloaded, and is that displaying seconds on the lower right?
re: noise. I don't find it too noisy. I do also like the look of the metal band but I may also look at either a nato or leather band, since the metal band does occasionally grab at arm hairs.
Click to expand...
Click to collapse
Higher left is hour, the biggest one is min, and the lower right is day.
This is based on my read watch habit. For me, the most important is min so this is bigger than other number.
Using app Remote Widget and UCCW, also supported newest Low Power Mode on SW2.

aseeme555076 said:
Passed two layers of tape.
But tape always fall out there, and vibration became loud as usual.
Click to expand...
Click to collapse
Thank you for the picture. Not an option for me as this is very well visible.

aseeme555076 said:
Higher left is hour, the biggest one is min, and the lower right is day.
This is based on my read watch habit. For me, the most important is min so this is bigger than other number.
Using app Remote Widget and UCCW, also supported newest Low Power Mode on SW2.
Click to expand...
Click to collapse
[disclaimer: newbie question ahead]
I just tried Remote Widget with Zooper Widget on my SW2 and it simply doesn't update at all on the watch. How did you manage to make it work?
[/disclaimer]

Remote Widget
murielt said:
[disclaimer: newbie question ahead]
I just tried Remote Widget with Zooper Widget on my SW2 and it simply doesn't update at all on the watch. How did you manage to make it work?
[/disclaimer]
Click to expand...
Click to collapse
In UCCW settings, check the last one "Force widget update". and in the Remote Widget, Turn device on select "CPU Only", 0 sec.
But it still stays in sync for 30~55 min and then stops. Hope we can find a way to solving this. Or connect to developer, let he add a Watchface mode.
Or maybe it's UCCW's problem, i haven't try too many times for this.

Same problem right here, but I think it's normal

Adding Own Photos to Watch Faces

Hey guys, has anyone figured out if there's a way to attach a photo or wallpaper to the S2's watch faces? This is the only thing that really bugs me. Outside of the level of watch face customization, I like it more than my Urbane (so far). Would even do a third party solution if such an app was available but so far I haven't found one.
Thanks in advance!
K-

The Digital Watchface allows you to do this.

Hmm. I just added an image to my watch gallery and there were no new background options on the digital watch face
Update: I was only using the watch to set the background. I see the more detailed face customization options in the app.
Sent from my SM-P900 using Tapatalk

You can do it through the Gear Manager app on the phone.
Sent from my SM-G925P using Tapatalk

optimummind said:
You can do it through the Gear Manager app on the phone.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
I really struggled with this until I found that you can only add a photo for the watch face using the "Digital" style. When you Stylize this group one of your choices is to add a photo from your phone.

I'm unable to use a custom image as the digital face. I keep getting a "Unknown Error. Try Again" . I'm able to send photos to the watch and view them in the gallery, so the syncing between phone and watch work.
Any ideas?

Not my video but he shows how to use own pics
Looks like that option is in the digital watch face
https://youtu.be/KEoeJXHnYxg
Sent from my SM-N910T using Tapatalk 2

Pix seems ok for me, but wish there was a way to move the time around like Watch Styler so it didn't block the center of the image.

working well enough for me, thanks!
Sent from my Nexus 9 using Tapatalk

I don't know if this app is available in the US market yet, but it became available last night in Korea. It lets you do custom analog watchfaces and download ones others have made.
It needs a watch app from the gear store, a google play app on your phone, and a website is used to make the custom faces.
Mr. Time Maker Google App
https://play.google.com/store/apps/details?id=com.apposter.watchmaker&hl=en
Website:
https://mrtimemaker.com/
Here's an example of one I made:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

supersoulfly said:
I don't know if this app is available in the US market yet, but it became available last night in Korea. It lets you do custom analog watchfaces and download ones others have made.
It needs a watch app from the gear store, a google play app on your phone, and a website is used to make the custom faces.
Mr. Time Maker Google App
https://play.google.com/store/apps/details?id=com.apposter.watchmaker&hl=en
Website:
https://mrtimemaker.com/
Here's an example of one I made:
Click to expand...
Click to collapse
The first watch face I made for my S2 was the Captain America shield, looked awesome and it was Age Of Ultron release weekend and me and the wife were binging on Marvel Blu Ray's lol how do you download from that site? The face you've made look great!

You have to have the mr. time maker app installed on your gear S2 (not sure if it's released in North America yet, got it from Korean market) and the google play app needs to be on your phone.
https://play.google.com/store/apps/details?id=com.apposter.watchmaker&hl=en
Like I said, the watch app may not have been released in the NA gear market yet. Just got it yesterday in Korea. If it comes out, just search for supersoulfly or captain america in the Mr. Time Maker phone app and you'll find my watchfaces.

supersoulfly said:
You have to have the mr. time maker app installed on your gear S2 (not sure if it's released in North America yet, got it from Korean market) and the google play app needs to be on your phone.
https://play.google.com/store/apps/details?id=com.apposter.watchmaker&hl=en
Like I said, the watch app may not have been released in the NA gear market yet. Just got it yesterday in Korea. If it comes out, just search for supersoulfly or captain america in the Mr. Time Maker phone app and you'll find my watchfaces.
Click to expand...
Click to collapse
That watch face is awesome, congrats!

supersoulfly said:
You have to have the mr. time maker app installed on your gear S2 (not sure if it's released in North America yet, got it from Korean market) and the google play app needs to be on your phone.
https://play.google.com/store/apps/details?id=com.apposter.watchmaker&hl=en
Like I said, the watch app may not have been released in the NA gear market yet. Just got it yesterday in Korea. If it comes out, just search for supersoulfly or captain america in the Mr. Time Maker phone app and you'll find my watchfaces.
Click to expand...
Click to collapse
Excellent, thanks! Been looking for something like this.

Go to your gear settings . Click on watch faces . Click on stylize and then the first option is background . Then select your picture .
kberk001 said:
Hey guys, has anyone figured out if there's a way to attach a photo or wallpaper to the S2's watch faces? This is the only thing that really bugs me. Outside of the level of watch face customization, I like it more than my Urbane (so far). Would even do a third party solution if such an app was available but so far I haven't found one.
Thanks in advance!
K-
Click to expand...
Click to collapse

Gear S3 screen problem

Hello experts;
I've got a gear S3, it was working fine since the day,I notice the screen is off, but the watch was connected to the phone via Bluetooth and I can gear sounds off notifications in the watch.
The touch screen was responding as well as the bezel. I turned the watch on and off several times until the screen come back, but it start first from pixel to white screen.
It was looking like an old TV with some pixels like noise. And finally stabilize to normal.
I've found some threads like that but none have solutions or details why this is happening. Only due to watchmaster, application that I don't have
Does anyone got solution or idea about that problem?
FYI I have the latest Tizen 2.3.2.1 APK6
Regards

aatbi said:
Hello experts;
I've got a gear S3, it was working fine since the day,I notice the screen is off, but the watch was connected to the phone via Bluetooth and I can gear sounds off notifications in the watch.
The touch screen was responding as well as the bezel. I turned the watch on and off several times until the screen come back, but it start first from pixel to white screen.
It was looking like an old TV with some pixels like noise. And finally stabilize to normal.
I've found some threads like that but none have solutions or details why this is happening. Only due to watchmaster, application that I don't have
Does anyone got solution or idea about that problem?
FYI I have the latest Tizen 2.3.2.1 APK6
Regards
Click to expand...
Click to collapse
Static on screen is caused by watchmaster, even if you don't have watchmaster app itself, some of the popular watch faces in store (Detector by Liongate or Timeless by Pluto etc.) actually comes with their own watchmaster embedded. Try with a stock watchface.

10urshin said:
Static on screen is caused by watchmaster, even if you don't have watchmaster app itself, some of the popular watch faces in store (Detector by Liongate or Timeless by Pluto etc.) actually comes with their own watchmaster embedded. Try with a stock watchface.
Click to expand...
Click to collapse
Thanks for reply;
I'll remove them all and try for a while and submit the result.

10urshin said:
Static on screen is caused by watchmaster, even if you don't have watchmaster app itself, some of the popular watch faces in store (Detector by Liongate or Timeless by Pluto etc.) actually comes with their own watchmaster embedded. Try with a stock watchface.
Click to expand...
Click to collapse
Hi;
Unfortunately after deleted all the downloaded watch faces, where I've left only the original ones. Bu, still have the same issue. I did a video during the issue but didn't find the way to upload it here. I linked some snapshot pictures taken from the video.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

aatbi said:
Hi;
Unfortunately after deleted all the downloaded watch faces, where I've left only the original ones. Bu, still have the same issue. I did a video during the issue but didn't find the way to upload it here. I linked some snapshot pictures taken from the video.
Click to expand...
Click to collapse
Sorry looks Like the pictures links are bad:
I put dropbox link to the video
https://www.dropbox.com/s/orqdb8zcst63jay/gear_S3_issue.mp4?dl=0

wow! I would exchange that. I have no knowledge or expertise, but that looks like a bad connection inside the watch to me.

aatbi said:
Sorry looks Like the pictures links are bad:
I put dropbox link to the video
https://www.dropbox.com/s/orqdb8zcst63jay/gear_S3_issue.mp4?dl=0
Click to expand...
Click to collapse
This is what watchmaster is causing, you problem is different tho, either your display connection is bad or your battery is swelling

Is there any guide to open and disassembly? I bought it from another country. no way to get it replaced

aatbi said:
Is there any guide to open and disassembly? I bought it from another country. no way to get it replaced
Click to expand...
Click to collapse
Call Samsung and speak with them. "Usually" they can tell if it is still under warranty and will fix it. It doesn't matter where you bought it. ymmv
It doesn't hurt to try.

Have you done a factory reset?
If the screen is unresponsive, this is done by holding done the Home button until it says "Rebooting" then tapping the button continuously until the boot up menu appears, then tapping it down to the "Reset" option.

any idea whats causing this using it since 3 months i had a normal stock watch face but i recently turned brightness to 10 and turned on always on display for about 4 hours before this happened rebooting and even factory resetting doesn't solve it has been 2 days

10urshin said:
This is what watchmaster is causing, you problem is different tho, either your display connection is bad or your battery is swelling
Click to expand...
Click to collapse
hi any idea i was using stock face and aod was turned on for about 4 hours using it since 3 months never had this problem i reset it and rebooted it plz help

Watch Faces by Gear Watch Designer- Request Accepted.

Hi,
I am a watch lover especially automatic movements.
I had Gear S3 classic with me and trying to conclude my will by designing watch faces for the watch i can't afford .
Here i will try to make the watch face on request once a week in my free time.(As I am working as a 3D Artist)
If you like my work you can DONATE me as well , will be more happy and work more with full motivation
I already did a watch face in another thread.
I am posting that one here.

RESERVED
1: Hublot Big Bang requested by @motoatrix
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1: Rolex

Movado, I made my own Museum Classic but it is not as nice as it could be.

Eric214 said:
Movado, I made my own Museum Classic but it is not as nice as it could be.
Click to expand...
Click to collapse
can you share your work image ?
So i can see what is missing to make it look good.

hack_er4 said:
can you share your work image ?
So i can see what is missing to make it look good.
Click to expand...
Click to collapse
This is the Background. I'd like the circle at the top smaller but its part of the img file and would also like a way to add a silver raised trim around it.

Eric214 said:
This is the Background. I'd like the circle at the top smaller but its part of the img file and would also like a way to add a silver raised trim around it.
Click to expand...
Click to collapse
Here please check if it can help you

hack_er4 said:
Here please check if it can help you
Click to expand...
Click to collapse
Yeah that's awesome thank you

hack_er4 said:
1: Hublot Big Bang requested by @motoatrix
hack_er4, i'm unable to download the watch face, I can only see the image. Thanks
Click to expand...
Click to collapse

motoatrix said:
hack_er4 said:
1: Hublot Big Bang requested by @motoatrix
hack_er4, i'm unable to download the watch face, I can only see the image. Thanks
Click to expand...
Click to collapse
Files added in second post.
Check in attachments.
Thanks.
Click to expand...
Click to collapse

hack_er4 said:
motoatrix said:
Files added in second post.
Check in attachments.
Thanks.
Click to expand...
Click to collapse
First of all congrats for the Hublot Big Bang face !!! Really great
I have a real one (lucky me) with a complete dark (black) backgroung and I tried to modify your backgroung manualy to get the same effect but with a poooor result.
Could you please be so kind to make one with a black dark backgroung (instead of the squared pattern) ?
And could you please just let me know how you handled the calendar numbers at the bottom right small window of your watch face as there is no correponding ressources image in the posted zip file ?
Many Many thanks in advance !!!!
Great job once again.
Click to expand...
Click to collapse

Would you be able to make a replica of the Nike+ Sport watchface? I can't seem to find one that has the information I'd like on the screen.
Something like this, only steps where the Nike tick is, keep the activity rings in the middle and calories where the weather is. Maybe change last run to the day and date?
http://avivirla.com/wp-content/uploads/2016/09/watch-4.jpg

Damo1888 said:
Would you be able to make a replica of the Nike+ Sport watchface? I can't seem to find one that has the information I'd like on the screen.
Something like this, only steps where the Nike tick is, keep the activity rings in the middle and calories where the weather is. Maybe change last run to the day and date?
http://avivirla.com/wp-content/uploads/2016/09/watch-4.jpg
Click to expand...
Click to collapse
yeah, please. It would be awesome if we had a Nike Plus watch face....

Anyone capable of making a watch face with AOD seconds hand/ motion just like the ones that come with the watch?
This is what truly makes a watch just like a real one.

Dumb Question
hack_er4 said:
1: Hublot Big Bang requested by @motoatrix
1: Rolex
Click to expand...
Click to collapse
I am obviously not clued in on how you are designing watch faces. So please forgive me for asking this question: How do I install this watch face to my Gear S3 Frontier? What app are you using to upload this watch face to Gear S3? Thank you and again forgive my ignorance.

Not able to add sub dial.
sheni7 said:
I am obviously not clued in on how you are designing watch faces. So please forgive me for asking this question: How do I install this watch face to my Gear S3 Frontier? What app are you using to upload this watch face to Gear S3? Thank you and again forgive my ignorance.
Click to expand...
Click to collapse
I did some research and discovered that I could make the watch using the graphics that you supplied using the Mr Timemaker website and apps. The website's watchmaking application did not allow me to upload the sub_hand that you supplied. I was able to transfer the watch to my Gear S3 Frontier, but like I said it doesn't have the sub_hands. Thus I am having to ask my previous question what app did you use to compile this custom watch face and transfer it to your watch? Thank you!

hack_er4 said:
Hi,
I am a watch lover especially automatic movements.
I had Gear S3 classic with me and trying to conclude my will by designing watch faces for the watch i can't afford .
Here i will try to make the watch face on request once a week in my free time.(As I am working as a 3D Artist)
If you like my work you can DONATE me as well , will be more happy and work more with full motivation
I already did a watch face in another thread.
I am posting that one here.
Click to expand...
Click to collapse
Hi i know this is an old thread but i just got the watch...anyway you could help me out with cartier faces i cant seem to find them anywhere. Maybe the ronde solo de cartier , calibre de cartier or ballon blue. I could donate for this...Thanks a lot.

I am looking for this watch face but to be modified... Instead of the weather app icon in the bottom right I would prefer it to be the "find my phone" quick access. And instead of the floor counter in the top left I would like a real-time weather icon... Obviously the design can't be identical but a similiar design with colour options would be great. I can like the watchface for reference if needed

Link*

I was very Busy in my work.
I will start working on faces on weekends now onward.
LucasFrance said:
hack_er4 said:
First of all congrats for the Hublot Big Bang face !!! Really great
I have a real one (lucky me) with a complete dark (black) backgroung and I tried to modify your backgroung manualy to get the same effect but with a poooor result.
Could you please be so kind to make one with a black dark backgroung (instead of the squared pattern) ?
And could you please just let me know how you handled the calendar numbers at the bottom right small window of your watch face as there is no correponding ressources image in the posted zip file ?
Many Many thanks in advance !!!!
Great job once again.
Click to expand...
Click to collapse
I will post the dark one soon.
Please upload a reference image I will make exact copy of that one.
sheni7 said:
I am obviously not clued in on how you are designing watch faces. So please forgive me for asking this question: How do I install this watch face to my Gear S3 Frontier? What app are you using to upload this watch face to Gear S3? Thank you and again forgive my ignorance.
Click to expand...
Click to collapse
I am using GWD for uploading.
Check a small tutorial of uploading its very easy.
kventura said:
Hi i know this is an old thread but i just got the watch...anyway you could help me out with cartier faces i cant seem to find them anywhere. Maybe the ronde solo de cartier , calibre de cartier or ballon blue. I could donate for this...Thanks a lot.
Click to expand...
Click to collapse
Please provide references I will add them in queue.
Longpre said:
I am looking for this watch face but to be modified... Instead of the weather app icon in the bottom right I would prefer it to be the "find my phone" quick access. And instead of the floor counter in the top left I would like a real-time weather icon... Obviously the design can't be identical but a similiar design with colour options would be great. I can like the watchface for reference if needed
Click to expand...
Click to collapse
I am working on mostly analog watch faces.
If you try you can do it yourself.
I can help in making graphics for you.
Thanks,
Click to expand...
Click to collapse

=> I cannot post outside links here , please let me know how to send your the URL of the original HUBLOT BIG BANG watch...

Themes / Apps / Mods Galaxy Watch 4 classic 46mm - watchface breitling blue requested and ported

Hey there Guys,
I am looking for this watchface, because I loved that on my huawei watch gt 2e. Now I upgraded to Galaxy Watch 4 classic and I seem not to be able to find this one here, I attached.
Does anyone know, where to put watchface requests, or have that watchface?
Kind regards, mobshredder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did you try emailing the developer of the watch face?

Not yet, will try it. That's a good idea

Mobshredder said:
Hey there Guys,
I am looking for this watchface, because I loved that on my huawei watch gt 2e. Now I upgraded to Galaxy Watch 4 classic and I seem not to be able to find this one here, I attached.
Does anyone know, where to put watchface requests, or have that watchface?
Kind regards, mobshredder
View attachment 5547347
Click to expand...
Click to collapse
I wanted the same thing and no one answer me.
There is a possible way.
First You need to download samsung watch face studio and connect the phone to it(takes 5 min with cmd there are isntructions all over the internet).
Then you can go to watchland website and look for breitling faces or what ever you want (all of them are "gwd" file from old tizen watch.
At the warch face studio select "file" and then "import gwd resource" and run it on the watch.
Worked for me,i have tested someting like 30 faces and most of them worked perfect

Ay, a great hint, Gt-2992. As I haven't found, who's the producer of that watchface, I have been looking since yesterday, how to port the Hwgt- watchface into a SGW4 watchface, by hand. I Will try that today, as you wrote and then post the result here. Do I have to be careful in any steps of your hints?
great thanks

I don't think so.
the "cmd" only for the ip adress so the watch face studio can connect to your watch4. Thats the "hard part".
The watch face studio came from samsung.
I know that you cant import "watch" file from watchmaker app to gwd or other like this

Great, I will take care of that hatd part then and reply with a result here.

Here's the watchfaces ported preview, running on my sgw4 yet as test-version. Calories counter had to be switched to a supported complication.

Here's the final fixed watchface zipped

Did you make it or downloa it?

I downloaded and extracted the hwgt2-one and then extracted the gfx, put them together in watch face studio, changed some gfx with paint.net, mixed them in watch face studio, changed the calories counter and gfx, changed some specs with the several hands, and created the copy as *.wfs for sgw4. Adb worked fine for me also. So not too hard to get it work.
Secret ingredient is as in every recipe, love

I'm glad I was able to help with some

Yeah I am glad about that too. Happy, that I learned to get the way through the process and the applications, with your tips and also. That's worth a lot and gets revealed potential.
You're kind of a teacher for me. Thank you GT-2992

No no it's ok.. I could not do all the next steps you did so easy..now i'm trying to find a way to make some tag huere connected watch face,there is one that i really want and i can't find a way to do it.
Thats the watch face:

Gt-2992 said:
No no it's ok.. I could not do all the next steps you did so easy..now i'm trying to find a way to make some tag huere connected watch face,there is one that i really want and i can't find a way to do it.
Thats the watch face:
Click to expand...
Click to collapse
Well, I'll see what I can do with it tomorrow.
Maybe I'll find this one. If so, I will build it.
best regards
Mobshredder

Thank you very much my friend

Gt-2992 said:
Thank you very much my friend
Click to expand...
Click to collapse
Do you have a source, where to get the watchface?
There are too many Tag Heuers

Mobshredder said:
Do you have a source, where to get the watchface?
There are too many Tag Heuers
Click to expand...
Click to collapse
I know it came from tag heuer connected 2020 3rd generation.
I don't have a link but i found it also in watchmaker app.
But i don't like watchfcss apps because they make it laggy and uses more battery

Gt-2992 said:
I know it came from tag heuer connected 2020 3rd generation.
I don't have a link but i found it also in watchmaker app.
But i don't like watchfcss apps because they make it laggy and uses more battery
Click to expand...
Click to collapse
Ok, then I'll have a look at watchmaker and extract and rebuild it. Please be a little patient, I'm excited on that tag heuer port

Mobshredder said:
Ok, then I'll have a look at watchmaker and extract and rebuild it. Please be a little patient, I'm excited on that tag heuer port
Click to expand...
Click to collapse
Thank you for giving me some hope, i really appreciate it