I write this in German - please translate it !!! Its to late for me to translate ....
Thanks orinoco for ftp:
ftp://www.shawus.com
Username is hydrosphere, password is 12345
Zuerst vielen Dank an alle in diesem Forum, die bisher an einer Lösung mitgearbeitet haben ! (towa, orinoco,sweeney,JoseF,domloff,blinky99,...)
Man braucht:
1. Resco Explorer http://www.resco-net.com/explorer_dwn.asp
2. Die Widcomm-Dateien (in MyTry2.zip auf ftp siehe oben)
3. Ein Registry-File zum Importieren in die Registry (in MyTry2.zip auf ftp siehe oben)
Verfahren:
1. Resco-Explorer installieren
2. Mit dem Resco-Dateimanager aus dem Ordner \Windows\Autostart die Verknüpfung "BTIcon" löschen
3. Hardreset (mit Stift ins Loch)
4. Mit Resco-Registry den Eintrag HKLM\Microsoft\Bluetooth\HCI komplett löschen
5. Mit Resco-Registry den Eintrag HKLM\Microsoft\Bluetooth\Transports\BuiltIn\3 löschen
6. Alle Widcomm-Dateien in das Windows-Verzeichnis kopieren
7. Die Datei Widcomm.reg in "My Documents" kopieren
6. Mit Resco-Registry die Datei Widcomm.reg importieren
8. Mit Resco-Dateimanager eine Verknüpfung in "\Windows\Autostart" zu "\Windows\BTTrayCE.exe" erzeugen
9. Hardreset (mit Stift ins Loch)
10.Auf Heute-Seite Bluetooth-Icon anklicken und Bluetooth anschalten "Turn Bluetooth on"
11.Warten, bis Icon ganz blau
12.Auf Heute-Seite Bluetooth-Icon anklicken und Bluetooth-Manager starten
13.Mit Menupunkt Tools->Paired Devices mittels ADD das Bluetooth-GPS suchen, anklicken, Passkey eingeben und ok klicken
14.Mit Menupunkt New->Connect! .... GPS auswählen und Anweisungen folgen
15.Im Bluetooth Manager das GPS auf der Karteiseite "My Shortcuts auswählen" un lanke anklicken, connect wählen
16.TomTom-GPS starten, als Protokoll "NMEA 0183v2 Bluetooth" und als Schnittstelle "BT serielle Schnittstelle COM7" auswählen
17.FERTIG
Folgende Probleme bestehen noch:
Wird TomTom in den Hintergrund geschickt, wird die Bluetooth Verbindung beendet. Beim Start von ToTom wird aber automatisch wieder verbunden.
Das Headset läuft noch nicht.
Here is the translation thanks for that info
Here is the translated text. Let me know if u find anything wrong. Thanks for this info
Thanks orinoco for ftp:
ftp://www.shawus.com
Username is hydrosphere, password is 12345
First thank you to all in this forum, which cooperated so far in a solution! (towa, orinoco, sweeney, JoseF, domloff, blinky99...)
One needs:
1. Resco Explorer http://www.resco net.com/explorer_dwn.asp
2. The Widcomm files (in MyTry2.zip on ftp see above)
3. A Registry file for importing into the Registry (in MyTry2.zip on ftp see above)
Procedure:
1. Resco Explorer install
2. With the Resco file manager from the file the linkage "BTIcon" \Windows\Autostart deletes
3. Hard RESET (with pin in the hole)
4. Delete the entry HKLM\Microsoft\Bluetooth\HCI with Resco Registry completely
5. Delete the entry HKLM\Microsoft\Bluetooth\Transports\BuiltIn\3 with Resco Registry
6. All Widcomm files into the Windows listing copy
7. The file Widcomm.reg in "My document" copy
6. Import the file Widcomm.reg with Resco Registry
8. Produce a linkage into "\Windows\Autostart" too "\Windows\BTTrayCE.exe" with Resco file manager
9. Hard RESET (with pin in the hole)
10. up hay width unit side Bluetooth Icon click and Bluetooth turn "turn on Bluetooth on"
11-wait, to Icon completely blue
12.Auf hay width unit side Bluetooth Icon click and Bluetooth managers start
13.Mit point of menu Tools >Paired DEVICES by means of ADDS Bluetooth government inspection department search, click, passport keys enter and to ok click
14.Mit point of menu new >Connect! .... Government inspection departments select and instructions follow
15.Im Bluetooth manager government inspection department on the card index side the "My Shortcuts select" un lanke click, connect select
16.TomTom-GPS start, when "NMEA 0183v2 Bluetooth" select minutes and as interface "BT serial interface COM7"
17.FERTIG
The following problems exist still:
If TomTom is sent into the background, the Bluetooth connection is terminated. When starting of ToTom however automatically again one connects.
The Headset does not run yet.
Please, don't make a Hardreset ! I mean a Softreset !
Please, don't make a Hardreset ! I mean a Softreset !
Hi, thanks for a good work.
Daniel wrote :
After having a closer look at it, I know now what the Bluetooth Enabler does:
- HKLM\SOFTWARE\Widcomm\BtConfig\Services\0005
"Enabled"=dword:00000001
- HKLM\Drivers\BuiltIn\WaveDev
"Dll"="BtCeIf.dll"
Interestingly, this is also what's in JoseF's registry settings posted on page 3 of this thread. In towa's settings on the same page, Services\0005 has an "Enabled" setting of 0.
Anybody with a Bluetooth Headset wants to give it a try? If it still doesn't work, we probably should have a closer look at JoseF's registry settings.
-----------------------------------------------------------------------------------
I will lika to say that I have the headset paired when I did the copy of the registry. If it can be any help.
JoseF
I have a headset.
Pairing is ok.
But the phoneapplication doesnt switch to the headset.
Still working......
axbl said:
I have a headset.
Pairing is ok.
But the phoneapplication doesnt switch to the headset.
Still working......
Click to expand...
Click to collapse
Thats exactly what I get! Though I haven't tried the reg settings JoseF
suggested yet.
It interesting that in the connection manager you can connect to the headset, and it rings when you do!
I'm even more sure that all is needed is a simple reg change to get the phone to switch to headset when it rings or when you call.
Dom
Thanks axbl
Navigator now works... I don't care about the headset....NAVIGATOR WORKS :lol: :lol:
RedBull said:
Thanks axbl
Navigator now works... I don't care about the headset....NAVIGATOR WORKS :lol: :lol:
Click to expand...
Click to collapse
I don't carea bout navigator! I need to have headset and ability to use my BT access point
Ok here is a solution from tes (http://www.ppc-welt-community.info/Community/showthread.php?s=&threadid=37232)
So, if you don't delete the Microsoft-Bluetooth entries and don't make a new entry in the autostart you can start the Bluetooth-Stack you need. For navigation, use the widcomm.
For Headset, use the Microsoft.
If you disable the bluetooth, you can switch around.
Tahnks, tes
So, widcomm stack doesn't support BT profile the way MS does?
I guess, I'll wait for an officila update. I really value having BT headset.
you have to wait until next CeBit in Germany !
@axbl
Hi, I have tried the switch around , most times it don´t work.
I might do the wrong way.
I can´t read German so I don´t understand the forum.
Regards
JoseF
Thanks to all who have put the time in to make the Widcom BT stuff work on the XDAII, it certainly does work.
If you really want to run both the Widcom and the MS stuff then you can do it this way. Don't put either shortcut into the StartUp folder. Instead, create a new folder (called BT for example) under Start Menu\Programs and put the two shortcuts in there. Then, neither runs at startup and you select which one to run whenever you want it. You still have to reset the device to change the BT software but this way it has worked every time for me so far.
Thanks NickP
JoseF
Just had time to play around with the two BT stacks.
The good news is that you can actually have both running at the same time!
The bad news is only one can be enabled at any one time.
But this means that you can have both icons in the bottom right corner.
To switch on the headset : Turn BT off on Widcomm(W), turn BT on on MS, and then enable the headset.
To switch back to W turn BT off on MS, then turn BT on on W.
And thats all you have to do!
So not an ideal solution but a pretty workable one I thnk!
Hi ´just you day it is not an ideal solution but a pretty workable.
I did not need to reset the device. I have been driving 1 hour.
Change to bt headset at a custumer 30 min.
Turning back to bt Widcomm 45 min with gps.
At home back bt headset without reset. Its okey at the moment.
JoseF
Further to this you can actually have both shortcuts in the startup dir.
But this will only work on a soft reset if the W Stack is disabled before you do it, (MS stack can be enabled or disabled).
Also when you apply the enable reg settings (in the other BT GPS forum), on the W BT browser you get a new option called 'headset'!
Though even if I get my headset paired and hooked up as a headset it doesn't work at all.
Excellent job
Thank you very much for all the effort that has gone in to fixing HTC/O2 development problems. I now can use my Fortuna BT GPS reciever with my XDA II with Tom Tom, also I can use my Ericson BT Headset. Unfortunatly not at the same time but it is great to be able to have the funcionality of both. For my next battle will be to get it unlocked so when I am in Spain I can use my Spanish SIM. So far I have been told nope we won't unlock it but I tell them it is not legal and that they have already done it for others but still keep quoting we had a meeting a month ago and was told under no circumstances will we unlock them so thinking of sending it back and buying one from Expansys which are european versions and are UNLOCKED. :twisted:
Re: Excellent job
Roadster said:
Thank you very much for all the effort that has gone in to fixing HTC/O2 development problems. I now can use my Fortuna BT GPS reciever with my XDA II with Tom Tom, also I can use my Ericson BT Headset. Unfortunatly not at the same time but it is great to be able to have the funcionality of both. For my next battle will be to get it unlocked so when I am in Spain I can use my Spanish SIM. So far I have been told nope we won't unlock it but I tell them it is not legal and that they have already done it for others but still keep quoting we had a meeting a month ago and was told under no circumstances will we unlock them so thinking of sending it back and buying one from Expansys which are european versions and are UNLOCKED. :twisted:
Click to expand...
Click to collapse
Its a bit off topic, but I've heard that if you pay for all 12 months subscription in advance they can unlock it for you. Not sure how much of this is true though.
Not according to the supervisor I spoke to he was having none of IT. Said no way under any circumstances still I am not bothered played with it for a few days and will send it back there loss of contract and I will buy one from Expansys. :roll:
I was reading around about issue using BT headset with the Himalaya (W2003 not second edition!)
I read several people who installed the WidComm stack, but as far as I have understood, with this hack there are still problems with the headset profile (still I don't now which!).
Talking about the standard MS stack, I read people using Nokia BT headset complaining about it loosing connection and turning off after 10 min. Is this a nokia only issue?
It seems that Jabra hs are working well. Is there any known problem with the standard MS bt stack?
Thanx to anyone who will/could help me reorganize my mind...
Regards,
Francesco
I have a bluetake G2 headset. When I had 1.72 ROM and installed Pocket Bluetooth Tools it worked perfectly. Currently I'm playing with SE ROMs and have not yet used this headset with it.
Widcomm stack does not support headset/handsfree profile on our device. It can bond with headset, but you would not hear any sound.
I am still using the MS BT stack with rom 1.72.00.
NO Pocket Bluetooth Tools (I would like to know why mamaich uses these with a 1.72 rom . . .)
NO issues whatoever with both Headset (Headset Protocol) or GPS (Serial Port Protocol).
Just rocksteady . . .
Bluetooth Activesync not working after PBT
Activesync over bluetooth doesnt work anymore after loading Pocket blue tooth tools,( it was working perfectly well till loaded PBT) It doesnt even give me the option of syncing via BT ( the option one normally gets when one opens activesync on the device ( tools menu 1) Options 2) via IR 3 ) Via BT ) now all I find is options and activesync via IR.
Bluetooth HS810 Microphone not working
I am using a Motorola HS810 bluetooth headset with WM2000SE-Sin-Merged-v2.0 on an XDA II. When I complete pairing, 3 pop-ups all happen at once asking various profiles supported by the Headset - Serial, Headset & Handsfree. I answer yes to the hands-free. (It's only possible to see the other pop-ups due to the handy alt-tab applcation supplied with this ROM version!)
The earpiece works just fine, but the microphone does not. I need to speak into the mic on the XDA II to be heard.
...I have now reverted to 1.72.00WWE & all is fine. It seems to be a problem with WM2000SE....
Any ideas?
John
XDA II
Motorola HS810
ROM 2.06.00WWE
Radio 1.18.00
ExtROM Sin.Merged.v2.0
I have a problem with the wired handsfree in my car, since I installed XDA_WM5_3.50aWWE ROM I can´t hear the sound of my xda 2 with my car speakers
With WM 2003 I could hear all sounds over my car radio ( handsfree with telephone mute output ).
Now with WM5 I can just hear the voice when I use the phone (but no TomTom or Mediaplayer sounds) and when I end the phone call my car radio is still muted until i remove my xda and connect it again.
May somebody help me. Please
Can you hear tomtom or media files using standard speakers or the xda2 head set?
Yes I can hear everything in the standardspeaker, just the Phone works with the handsfree.
freeair said:
Yes I can hear everything in the standardspeaker, just the Phone works with the handsfree.
Click to expand...
Click to collapse
The Problem is, that the WM5 wavedev.dll is not fully compatible with Himalaya, I assume, this is because of WM5 was not designed for Hima's...
In the following thread is the solution for your problem
http://forum.xda-developers.com/showthread.php?t=295481
Dennis
PS: Falls Du nicht weiterkommst, schick mir ne Nachricht ^^