Related
Hi,
I've got a problem with my carkit (O2 XDA-Carkit) after I upgrade to the new ROM-Version of T-Mobile (1.60).
With the old Rom-Version, the carkit works as a loadspeaker for all kind of sound. The voice-instructions from tomtom for example, came out of the carkit-speaker loud and clearly. Each kind of sound, the device made, came out of the speaker of the carkit.
Now, after upgrading to the new ROM, only the telephone works with the speaker of the carkit. With Incoming or outgoing calls I can use the carkit as usual...the speaker works and the mikro works also. But every other sound (e.g. tomtom voice-instructions) came direktly out of the speaker of the mda2 in a poor quality.
Some hints, how I could use my carkit again as a speaker for all kind of sound without goinig back to the old ROM ?
Any other kind of hints...maybe to use a bluetooth headset therefor (so that all kind of sound came out of the headset....not only telephone...I've got a Plantronics Headset...but also only the telephone works)
thx for help
best regards
rob.
Yep.......I have the same problem here.......don't know why they changed settings on the handsfree profile here.
Another thing you will find out is that the charging is very slow on the XDA carkit with the XDA II. If you run TomTom, Yeti and a bright screen the xda II will not charge, but drain!!
It has something to do with the wiring of the interface, but unless someone will come up with a solution I will go for a new carkit or a BT solution. (It's a bloody shame though it doesn't work properly with the XDA carkit! :evil: )
Hi,
the charging-problem is also a mess.
I think, the problem is only the GPS-driver from tomtom. In my tests, only when the GPS-driver is loaded, the battery-power goes down. With stopping the GPS-driver, the battery will charge again, but only, if the battery-power is more than about 75 - 80%.
If the battery is less than 75%, it will not charge at all, even if, there is no App runnung and the screen is off.
You said, you will go for a new carkit or bluetooth-solution. Do you know a carkit or bluetooth-solution, wich offers the feature, that all sounds (tomtom instuctions...etc.) came out of a loadspeaker or thru a headset (without connecting the wired headphone ;-)
As far as I know, at the moment all devices works only with the telephone-funktion....
best regards
rob.
Same here,
i have build my own carkit, and have put ground to pin 19,
sound was normally going though the connector to my car stereo
now it doenst anymore :evil:
I am sure this isnt a hardware thing it is software
could be the settings on the handsfree profile. on the xda2...
this is very very frustrating. just being finished with my carkit and now i cant use it anymore
also you cant set the phone to speakermode anymore..
I am sure this isnt a hardware thing it is software
could be the settings on the handsfree profile. on the xda2...
Click to expand...
Click to collapse
Does anybody know how to change this back?
I found that the registry points to a certain file in your windows directory: HandsFree_Dll.dll
(I found this here: HKLM\Services\Handsfree)
Can someone with the old 1.03 ROM please upload this file so i can try if this solves the problem...
TIA,
Max
Akira, Max :
I am building my own car kit, and have no success.
I do not obtain audio out with or without grounding pin 19.
I'm running Rom 1.60.00WWE.
Did you solve your problem ??
I must correct my last update.
I obtain audio when in phone mode, but not during playing waves or TomTom directions. Even Ring Tones do not go out trough the bottom connector.
So is it a software problem ?
Can it be corrected ?
I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.
me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??
bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers
Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks
Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly
The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD
Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.
How to get it work with Qtek S200.
This is how I did it.
Get the aku33_a2dp (search the forum) and install the two CAB-files by copying them via activsync to ex. my documents. Install them from there
Get aku35_a2dp (search the forum) and copy three files to the \windows directory (Avrcp_MPplugin.dll; bta2dp.dll;sbc.dll) of the pda
Reset your Qtek and delete any pairing with HTC BH M100 Headset.
Pair it again and you will have the option to set "Wireless Stereo".
Good luck
Is it stable?
Did you have some problems with it?
Stereo Headset
So far it Stable
It works like a charm.
I'll let you know if I have any trouble later.
the a2dp was already working on aku 2
the problem was the sound's quality... kind of saturated/metallic on some frequencies...
Are you experiencing the same problems or is the sound good?
i try to search with key word "aku33_a2dp" and "aku35_a2dp" but it only refers to this thread. could you just upload the file?
baramuse said:
the a2dp was already working on aku 2
the problem was the sound's quality... kind of saturated/metallic on some frequencies...
Are you experiencing the same problems or is the sound good?
Click to expand...
Click to collapse
Just out of interest, are you using an iTech or iTech derivative A2DP device? Looking closely at the forums, it seems like the HT820 is experiencing perfect sound quality - I purchased some (arriving soon, currently have iTech R35) to test my theory, just looking for some confirmation.
edit: I found it
desperado 27-04-2006 03:26 PM Just some finding to share everyone here. I am using 818Pro Chinese version. I have tried the i.Tech S38 and Motorola HT820 bluetooth headset and found that the latter is of much better MP3 sound quality than the former. There is no hissing sound for HT820.
Click to expand...
Click to collapse
edit2: sorry, clarification, the S100, the stereo version of the HTC bluetooth headset, appears to be the iTech R35.Exhibit A , Exhibit B
theone3 said:
Just out of interest, are you using an iTech or iTech derivative A2DP device? Looking closely at the forums, it seems like the HT820 is experiencing perfect sound quality - I purchased some (arriving soon, currently have iTech R35) to test my theory, just looking for some confirmation.
edit: I found it
edit2: sorry, clarification, the S100, the stereo version of the HTC bluetooth headset, appears to be the iTech R35.Exhibit A , Exhibit B
Click to expand...
Click to collapse
strange I thought it was the MS bluetooth stack (and especially the A2DP dll) that was delivering poor sound quality because with the same headset (plantronic A590) I had good sound with an ipaq (widcomm stack) and crappy sound on my S200 (with MS stack)...
baramuse said:
strange I thought it was the MS bluetooth stack (and especially the A2DP dll) that was delivering poor sound quality because with the same headset (plantronic A590) I had good sound with an ipaq (widcomm stack) and crappy sound on my S200 (with MS stack)...
Click to expand...
Click to collapse
Yeah, it is, it's just worse with some than others. The Plantronics A590 has been reported as sounding 'muddy' on the prophet. I think it's basically just finniky
Here is where I found them.
http://forum.xda-developers.com/attachment.php?attachmentid=31803&d=1165260031
http://forum.xda-developers.com/attachment.php?attachmentid=32121&d=1166242625
Thank You
It worked just fine to me.
You where so much helpfull!
Mike
stsastsa said:
How to get it work with Qtek S200.
This is how I did it.
Get the aku33_a2dp (search the forum) and install the two CAB-files by copying them via activsync to ex. my documents. Install them from there
Get aku35_a2dp (search the forum) and copy three files to the \windows directory (Avrcp_MPplugin.dll; bta2dp.dll;sbc.dll) of the pda
Reset your Qtek and delete any pairing with HTC BH M100 Headset.
Pair it again and you will have the option to set "Wireless Stereo".
Good luck
Click to expand...
Click to collapse
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
I have the same problem.
Any solution? Thanks
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
not yet.
jose
Reboot the PPC the check..I am using Jabra 8010 without any problems
Thanks for your suggestion~
But I reboot many many times~
But still fail~
Same problem here
Headset = Bluetrek G2
I can answer calls with it, but ppl can't hear me
hs 820 ,same problem
i have bt8oo and it works fine , any problem .
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
Also,this problem happen in i-tech R35d
All, I had problems with every WM6 rom, varying in seriousness. However, this one meant you can't use it at all (Blutrek G2). So I bit the bullet and bought a HBH-PV700 fo 19.99ukp. Have had no problems since.
Bluetooth problem
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
The Bluetooth needs serious work
Hey ,
I've been using Nokia BH-900 headset and the vioce quialty etc is fine the only problem i am facing is that every few hours the connection just drops and i have to reconnect the bluetooth headset. Also BTGPS is not just working for tomtom or co pilot.
Any suggestions on how it would be possible to use one of the older bluetooth stacks from the original roms would be a great help.
Thanks
We have two families of wm6 roms: universal specific (Indra, Helmi, Jwright, Pdaviet up tu 08) and Athena derived (DarkForce and latest Pdaviet). Bluetooth on them share the same problem present in aku1.x original universal rom: after a random number of houres it turns off and up to now we don't know why?
Plantronics Discovery™ 640 - the problem is the same.
josedias said:
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
Click to expand...
Click to collapse
same problem with all wm6
bluetooth and probs
well hope there is some serious discussion going on in the big wigs for the bluetooth stacks. All of you are using lots of energy in between the 2 stacks of Microsoft and Widdcomm. Personally I prefer widdcomm but please get atleast one of them working for sure with everything
BTW the nokia headsets are working fine with all the WM6 versions I have used. Only the BT goes off after sometime with the blue light still flashing and then even the nokia cant do much.
Any help is worth a million
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
beginner said:
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
Click to expand...
Click to collapse
Isn't that due to the fact BT switches off when the uni switches itself on with incomming calls comming out of hibernation
I received my shiny new S710 today (replacing my imate sp5) i am having terrible problems with bluetooth and my car kit (Parrot Ck3100 with latest sortware) The phone connects and syncs ok but disconnects after a few mins and refuses to connect again.
I have an old motorola h605 headset that shows similar problems of not connecting or dropping the connection.
The Ck3100 kit has worked faultlessly with my imate sp5 for the last year.
Has anyone else had any problems with headsets or car kits?!
I have done a hard reset on the S710 and have nothing installed, and also disconnected the power to the CK3100 for 1/2 an hour before attempting to re setup the pairing
iain
Nokia CK7W
On a similar note, while my Vodafone V1415 works with my Nokia CK7W, I cannot end a call by pressing the button. Last number redial (two presses) and Hold or something like it (press and hold) are OK. To be fair, the CK7W is a little dated, but has proven to be fine with both Blue Angel and Hermes.
On the plus side the audio is good, without any echo for the remote caller.
Nokia CK-7W and S710
As with the Qtek 9100, the S710 seems not to operate soomthly with the NOKIA carkit CK-7w. I have to turn volume up to 100% and the sound from the speaker is still rather quite. The person i am calling is complaining that the line is not perfect. So for me it is back to the standard corded earpiece.
So any tips using the CK-7W and vox succesfully together are welcome!
@mcroonen
It's strange that I don't have the same experience as you. What version is your software? Compare with mine in my signature. I'm afraid I can't offer any suggestions, it seems to be pot luck! Maybe we find some variations in the radio stacks that will sort this out.
further to this i managed to borrow a e650 (vox) from work and it worked 100% with my car kit and tomtom and laptop!
I spoke to htc who said they had tested with the parrot ck3100 and said it worked 100%, as my phone was struggling to be detected by several devices and also struggling to detect other things that they recomended getting it replaced.
Spoke to handtech who said they would replace asap
jbn said:
@mcroonen
It's strange that I don't have the same experience as you. What version is your software? Compare with mine in my signature. I'm afraid I can't offer any suggestions, it seems to be pot luck! Maybe we find some variations in the radio stacks that will sort this out.
Click to expand...
Click to collapse
@jbn
KPN
OS: 5.2.1235 (Build 17740.0.2.0)
ROM: 1.15.405.2
Radio: 4.1.12.37_02.83.90
I had problems whith the sound quality and people not hearing me well.
For me it helped to delete the registry settings for the nokia ck-7w
It's under software/htc not sure if it was in LM or CU. I think LM.
Good luck
Had the same problem. Qtek8310 was working fine, S710 not. After a reset of the Parrot also the S710 is working fine.
aage said:
I had problems whith the sound quality and people not hearing me well.
For me it helped to delete the registry settings for the nokia ck-7w
It's under software/htc not sure if it was in LM or CU. I think LM.
Good luck
Click to expand...
Click to collapse
Unfortenately deleting the settings introduces echo and noise (voice sounds like robot). I think S710 and Nokis Ck-7w are not made for eachother.
I will try using the Parrot 3100 as on alternative BT solution..
Parrot CK3300 GPS CAR KIT
I have the Parrot CK3300 GPS CAR KIT and no problems at all with my S710, works a dream
Parrot
Hi,
You should visit http://www.parrot.com/uk/support/downloads
and get the latest software for your Parrot. You will need a bluetooth enabled laptop or to get your bluetooth enabled PC near your car!
Flash your parrot, then connect choosing a windows CE device. It will fully sync your phonebook too.
I use the Orange E650 and connect to my Holux GPS receiver and Parrot 3100 at the same time with no problems at all.
cheers
Sinet2020
JETware
See this thread for a possible solution for the Nokia CK7W!!!!
http://forum.xda-developers.com/showthread.php?t=331096