Related
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
Is the Bluetooth correctly setup in factory settings?
hans.vinkers said:
Is the Bluetooth correctly setup in factory settings?
Click to expand...
Click to collapse
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
ajp8868 said:
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
Click to expand...
Click to collapse
Maybe try a different phone just for testing
hans.vinkers said:
Maybe try a different phone just for testing
Click to expand...
Click to collapse
I'll give it a go, but it's the actual box that is loosing its name and passcode when you go into Bluetooth settings. I've tried restarting it this morning 3 times but can't get it to work
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
ajp8868 said:
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
Click to expand...
Click to collapse
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
WarSpaz said:
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
Click to expand...
Click to collapse
Ahh that would make sense! Strange I thought this would conflict with the on-board bluetooth
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Same problem...
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
The same situation with my PX5 Dasaita - very rare, but some times bluetooth looses name and password. Can t find what is the cause...
Regards
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
ikerg said:
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Click to expand...
Click to collapse
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
abagos said:
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
Click to expand...
Click to collapse
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
WarSpaz said:
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Now that sounds good, any chance you remember where?
ajp8868 said:
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
Now that sounds good, any chance you remember where?
Click to expand...
Click to collapse
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
WarSpaz said:
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
andysabre said:
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
Click to expand...
Click to collapse
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
ajp8868 said:
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
Click to expand...
Click to collapse
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
andysabre said:
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
Click to expand...
Click to collapse
Perfect thanks, good luck with yours!
Deleted
Hello, i have the same problem with the same bt chip.
SD-968 on Eonon navigation. Last summer it was working ok if i remember correctly when i was on stock rom, but then i changed to malasyk and hal9k, and i have problems.
I checked the factory settings and i have SD-968 option on BT. I even dissasembled the navigation to physically check if i have SD-968 and its there!
If i put the navi to autosleep, almost never wakes up with BT available. Always no name and no password with no luck of writing them back. The only solution is to reset the navi once, maybe twice.
I tried to put it on auto off after 30mins, so it will do a full bootup, and maybe 5 times out of 10, it works.
Maybe is has something to do with the cold? i tried the navi on my table in the house and it was a perfect 10/10 at bootup.
Hello. I'm hoping to keep my unit as up to date as possible and wanted to ask if there any files compatible with my unit, and if possible, change the look of the ui too, because it looks super bland to me compared some of the ones I've seen online. I've only updated the firmware once when my seller gave me a file to fix the time issue I had when I first got the unit.
I currently have a Seicane unit for my accord 05.
The reason I'd like to update the mcu is in hopes that may be it'll help with displaying my climate controls. Maybe I'm off with that, but I'm still not able to figure out how to make it display on my screen.
I'm honestly sorry if this has been asked before, I just got overwhelmed with searching on my own in android auto, so I figured I'd ask directly.
Thank you guys.
What factory/mcu do you have. From that you can then decide options.
marchnz said:
What factory/mcu do you have. From that you can then decide options.
Click to expand...
Click to collapse
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
chewybits95 said:
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Click to expand...
Click to collapse
snailium said:
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
Click to expand...
Click to collapse
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
themissionimpossible said:
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
Click to expand...
Click to collapse
Hello to everybody.
I've the same device from Seicane. for my Renault Koleos bought 2 months ago in Aliexpress. It came with version 3.30. The information of my device is
- Compilation rk3368
- Kernel 4.4.167 #176 Fri Nov 22 09:34
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
- CPU Octa Core Cortex A53 1.5G
- Android 9. Screen resolution 1024*768. 9 " Screen
- Memory 3940 Mb
I've problems with microphone ( nobody can hear me when calling). I'm looking for an update. Does anyone can confirm if I can install one of the mod firmwares? I guess this should be compatible with PX5 firmwares, but I'm not 100% sure. Does anybody else has this problem with the microphone?
I haven't found any information in Seicane website. Their support is a disaster....
Punisher66 said:
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
Click to expand...
Click to collapse
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
themissionimpossible said:
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
Click to expand...
Click to collapse
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test miccrophones). I'll try with external one.
Thank you again.
Hi.
Anyone know, or can you tell me who is the HF manufacturer?
The seller is Secaine, but he does not offer any information, nor does he provide any type of file for updating his devices.: eek:
Punisher66 said:
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test microphones). I'll try with external one.
Thank you again.
Click to expand...
Click to collapse
I've tried eternal mic via jack connector and I installed the update. Nothing changed. Nobody can hear me in Bluetooth calls and if I record the sound of the microphone, nothing appears.
I've entered in factory settings and I've seen I have Bluetooth device SD-BC6. I didn't found any option to increase the volume of the microphone. I'm installing programs to access to engineering mode ( I hope I could change the volume of the mic).
In parallel, I've bought in aliexpress an USB microphone, in order to have other input source. Let's see. If none of those test work, I'm thinking on install other firmware like hal9k and root my device.
I don't know what else to do.....
Any idea?
Punisher66 said:
if I record the sound of the microphone, nothing appears.
Click to expand...
Click to collapse
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
themissionimpossible said:
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
Click to expand...
Click to collapse
My guess is that mic volume is lowered to 0 I don't know why, since 2 independent microphones give the same result.
In other android 'phones' I entered in engineering mode and I was able to change this. This is the main option I'm looking for.
In parallel, a USB microphone (I'm waiting for it) would be a different sound source to try with ..... We will see which works
Did you factory reset the head unit?
After a factory reset the mic level should be reset as well.
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MRA58K
ro.build.display.id=YT9218_00005_V004
ro.build.version.incremental=1569378556
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=8.1Go
ro.build.version.security_patch=2017-11-05
jamal2367 said:
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Click to expand...
Click to collapse
Seicane was the one who give me this directly and said it was Android version 10. I haven't tried it myself because my radio is working smoothly right now. If it's not Android 10 I do apologise as I was told that is the version. I wouldn't lie about this because I have gotten so much from this forum and want to give back. As I said, seicane claim this is Android 10 version. I have the conversation to prove this if needed.
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
acvaristul said:
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
Click to expand...
Click to collapse
I honestly didn't pay any attention to the file name. I did mention it to seicane support team that this isn't Android 10 version. They are supposed to be looking into it and sending the correct version soon. I did notice that the specs on my unit is
AllWinner
Quad-Core T3 P1
Board: exdroid
GPU:Mali-400 MP
API:29
I found these online and I am running them on my Seicane PX5.
https://mega.nz/folder/C6Iz0AZC#4vU2rue99881X9MxDxz_YA
---------- Post added at 08:30 AM ---------- Previous post was at 08:29 AM ----------
This also has a new version of Zlink, which is why I updated
Some photos
Help
Do you really expect to get help without sharing any information about your unit?
lucasjason74 said:
Help
Click to expand...
Click to collapse
Is it an FYT unit - you have to put some work in, why expect others to do the work
head unit 7862 china
(cant find the app "360 view" or "360 panorama")
i buy the "head unit with camera 360". but the saller not give me the camera 360 and the head unit dont have app for camera 360. (the saller has been banned that why cant contact again) then i buy the camera 360 at another saller. and im done installing the camera at my car.
now i do not know how too find the app for camera 360 for my head unit.
please some one help me.
No app named: "360 panorama" ???
Well I this that you don't have 360 in your unit, but will leave the masters answer !
I hope. My head unit have the 360 function. Because at the setting have switch for 360 camera. But i cannot find the app "360 panorama".
Where can i download it.?
normally the application is inside the AllAppUpdate.bin file in the /oem/app folder and named "190000000_com.syu.fourcamera2.apk"
FYI, all FYT 7862 units have the "360 switch" option in "settings" page EVEN if they don't have the 360 chip installed
mariodantas said:
normally the application is inside the AllAppUpdate.bin file in the /oem/app folder and named "190000000_com.syu.fourcamera2.apk
Click to expand...
Click to collapse
So,if the app "360 panorama" dont have at my head unit. i cannot download the app? Im done install the camera. But cant function. So sad
will try to put the apk here tonight, you'll try to install directly in your head unit and then see if that works (or not)
mariodantas said:
will try to put the apk here tonight, you'll try to install directly in your head unit and then see if that works (or not)
Click to expand...
Click to collapse
Thank you so much brother. I hope it will work.
mariodantas said:
will try to put the apk here tonight, you'll try to install directly in your head unit and then see if that works (or not)
Click to expand...
Click to collapse
Helo brother. have you found the apk?
Yes,
mariodantas said:
Yes,
Click to expand...
Click to collapse
Im done download and put at my head unit. But When i try it. Nothing happens
Missing 360 camera hardware.
marchnz said:
Missing 360 camera hardware.
Click to expand...
Click to collapse
Can fix it?
It require the preinstalled hardware module to your head unit, then firmware (with MCU) support 360.
mrVuHoa said:
It require the preinstalled hardware module to your head unit, then firmware (with MCU) support 360.
Click to expand...
Click to collapse
Where can i get the preinstalled hardware?
eddietan11111 said:
Where can i get the preinstalled hardware?
Click to expand...
Click to collapse
you should not find this, because it may complicated with end user.
the hardware board can bind in taobao.com
mrVuHoa said:
you should not find this, because it may complicated with end user.
the hardware board can bind in taobao.com
Click to expand...
Click to collapse
please can you help me with a link, i went to the website is fully chinese, cant even get the 360 chip
ninoB2 said:
please can you help me with a link, i went to the website is fully chinese, cant even get the 360 chip
Click to expand...
Click to collapse
I think he actually means buy a new unit
marchnz said:
I think he actually means buy a new unit
Click to expand...
Click to collapse
Already have a unit without 360 chip.. So i don't want to buy another unit.. That's why am looking for a 360 chip that i can install in mine
360 Chips are generally bundled with mainboards (already soldered), I don't know if you will find something sold separately, but, I thins the I already saw a board with separated chip linked by a cable strip (i.e. like mipi or lvds screen strips)
Hi everyone,
Looking for a bit of help here. I have an Idoing in my subaru WRX and I decided to upgrade from RVA to optical into my DSP. So, I got a Topping D10s, hooked it up, and no audio output. The D10s is getting power but no audio. Is there something that I need to do within the Idoing to enable USB audio or ?
This is the head unit:
https://www.aliexpress.us/item/2251832768778756.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
Appreciate any insight. Thanks
mxl160 said:
Hi everyone,
Looking for a bit of help here. I have an Idoing in my subaru WRX and I decided to upgrade from RVA to optical into my DSP. So, I got a Topping D10s, hooked it up, and no audio output. The D10s is getting power but no audio. Is there something that I need to do within the Idoing to enable USB audio or ?
This is the head unit:
https://www.aliexpress.us/item/2251832768778756.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
Appreciate any insight. Thanks
Click to expand...
Click to collapse
Is it an FYT based device, post Android system information including MCU version
Please disregard. I got it to work.
mxl160 said:
Please disregard. I got it to work.
Click to expand...
Click to collapse
Then share how you did it. It might help other users in the future.