How to turn off the sound at the end of a call.?
I treid on phone setting but it do not help.
In the phone app go to settings
it don't stop the sound
Strange
It's not in Phone settings but in the app
My Phone is In Danish but i think it's like this in English
Open Phone app, go to Settings, go to Call Alerts and Ringtones there you can turn it off
Works for me
for mr did not work,but,i stoped the notification from call recording and this helped me.
Ok, that makes sense
That's a totally different issue, it's not the Call but the recorder that plays the sound
I'm pretty sure turning off "system sounds" will mute that.
Related
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
Everything worked fine until I installed MS Voice command 1.6. At first incoming calls would still ring fine, but then I tried to enable the "announce incoming calls" option and instead the phone stopped ringing completely AND also did not announce incoming calls.
I've tried disabling that option, disabling Voice Command altogether, uninstalling Voice Command completely and rebooting, and all without success. Incoming calls produce no ring sound at all, under any circumstances. I've checked and double checked all sound & notification settings, ring volume, settings etc, and nothing makes any difference. Voice command must have changed some registry setting somewhere and I just cannot get it to change back, no matter what I do.
Can anyone help? Is there any way to restore the ring function? The little incoming call window pops up but there is just no ring sound, at all, ever. It works fine when I test/preview the ring under settings, but not when a call comes in!!
paleozord said:
Everything worked fine until I installed MS Voice command 1.6. At first incoming calls would still ring fine, but then I tried to enable the "announce incoming calls" option and instead the phone stopped ringing completely AND also did not announce incoming calls.
I've tried disabling that option, disabling Voice Command altogether, uninstalling Voice Command completely and rebooting, and all without success. Incoming calls produce no ring sound at all, under any circumstances. I've checked and double checked all sound & notification settings, ring volume, settings etc, and nothing makes any difference. Voice command must have changed some registry setting somewhere and I just cannot get it to change back, no matter what I do.
Can anyone help? Is there any way to restore the ring function? The little incoming call window pops up but there is just no ring sound, at all, ever. It works fine when I test/preview the ring under settings, but not when a call comes in!!
Click to expand...
Click to collapse
Have you tried backing up device and then doing a hard reset?
Now i hv an issue which need u help. For my Nexus s, no vibrate appears when an sms or gtalk message comes if the silent mode is off. But, the phone would be vibrating if i turned on the silent mode. i set vibrate always in the setting of Sound. i also set the vibrate always in the setting of SMS and Gtalk. But, it doesn't work. i wanna the ringtone and vibrate both appear if an sms or gtalk meassage comes. is there anyone help me?
there are 2 modes
make sure you have set it to VIBRATE mode
if you set it to SILENT mode, it is really silent, it wont even vibrate, because vibration makes noise
AllGamer said:
there are 2 modes
make sure you have set it to VIBRATE mode
if you set it to SILENT mode, it is really silent, it wont even vibrate, because vibration makes noise
Click to expand...
Click to collapse
Now the problem is that if the SILENT mode is selected, vibrate would come, if not, no vibrate comes. i wanna see that ringtone and vibrate come out together if an sms or gtalk message received without SILENT mode selected. but, it doesn't work. However, if an incoming call came, the ringtone and vibrate could come out together.
i had the same issue ever since I bought my Nexus S but the setting for vibrating when you receive a text message is in the Messaging app after you press the menu key adn go into settings
Messaging App --> Menu Key --> Settings --> Vibrate (Under the Notification Settings)
Hope this helps!!
I use audio manager (free version) from the market. It offers excellent control over all the global sound levels and vibration.
Sent from the future to put right what once went wrong.
My ringer is usually off and I can't keep looking at my screen (e.g., for NoLED) when I'm with patients. I've been unable to get vibration notifications of incoming text messages, although as far as I can tell I've selected everything to do with vibration in Settings.
Surely there's a way to get this that I'm missing.
in the sound settings, select vibrate and choose an option like vibrate only in silent mode or always. in the messages app, choose settings and select vibrate. choose vibrate only in silent mode or always
tailsthecat3 said:
in the sound settings, select vibrate and choose an option like vibrate only in silent mode or always. in the messages app, choose settings and select vibrate. choose vibrate only in silent mode or always
Click to expand...
Click to collapse
Right. I've done that (Vibrate Always in both Settings and Messaging), yet it doesn't vibrate for anything except calls.
be certain that notifications are enabled in the messaging app.
there was a similar problem on a couple htc phones i had. i used a program from the market called 'sound manager', i believe it was. then i set everything the way i wanted it, did a test and vibrate worked. then when i deleted the sound manager app the settings stuck and my messages still alerted via vibration. good luck.
I'm starting to think this might be a Gingerbread bug, man, cuz I don't get vibrations on text either
I used to think it was CM7 but I have the same problem on stock.
In a meeting kept getting IMs, and the watch beeped every time. It was distracting and I was annoying people in the room so I pulled down the settings and clicked on the speaker icon. The symbol is now the speaker with the line through it but the sound is not Disabled !!!!!!
What can I be doing wrong ? In some situations it is inappropriate for the watch to make sounds but I can not turn sound off.
hello,
never happen to me, I will investigate and if possible give you feedback.
regards
AstroDigital said:
In a meeting kept getting IMs, and the watch beeped every time. It was distracting and I was annoying people in the room so I pulled down the settings and clicked on the speaker icon. The symbol is now the speaker with the line through it but the sound is not Disabled !!!!!!
What can I be doing wrong ? In some situations it is inappropriate for the watch to make sounds but I can not turn sound off.
Click to expand...
Click to collapse
Not sure if you are new in android. Android has 3 volume for adjustment. You need to control them one by one. You mute the media volume, but you will still get sound from notification, or ring.
Check out more audio option in the option menu, not the quick slide down icons.
mcdull said:
Not sure if you are new in android. Android has 3 volume for adjustment. You need to control them one by one. You mute the media volume, but you will still get sound from notification, or ring.
Check out more audio option in the option menu, not the quick slide down icons.
Click to expand...
Click to collapse
It also has One Setting to turn the Speaker On and Off. This is what did not work yesterday.
Turn the Speaker off at the meeting on again when it ends. Easy if it worked
Looks like the App "Feel the Wear" was causing this issue.
The developer updated the app and now turning the speaker off mutes notifications.