On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
I loaded WM6.5 ROM on my Treo 750.
Everything is great except one issue...
... I cannot set the Incoming Call Ring Tone.
When I go into the options of the phone, it is set to "none".
I set it to "Vibrate and Ring", then set a ring tone.
When I save/exit, it reverts back to "none".
I tried mid ring tones, wma, and mp3.
I tried ring tone only and vibrate only also...
... But no matter what I set it to, it keeps reverting back to none.
It WILL NOT ring or vibrate on incoming calls.
The SMS, Voice Mail, Missed Call, and email notifications all work fine.
ANY Help would be great!
Thanks
try first to change the other sounds , like unknown caller , and so , and then return to change the known caller...
libal said:
try first to change the other sounds , like unknown caller , and so , and then return to change the known caller...
Click to expand...
Click to collapse
Thank You for the reply!
There is no problem saving the settings in the Sound Notifications settings.
While on the dialer(Phone) screen, I cick Menu, then Options. This takes me right to the Phone Options page where I can set the folowing 3 options:
(1) Ring Type (Ring, Ring and Vibrate, Just Vibrate)
(2) Ring Tone
(3) Keypad Tone
While the Ring Type is set to "None", the Ring Tone box is grayed out.
I change the Ring Type to "Ring", I can then select a Ring Tone.
The only field that WILL NOT save is the Ring Type.
The Ring Tone still has the Ring Tone I selected in the box.
But the Ring Type keeps reverting back to "None".
But I did as you said (in sound notification settings)...
I changed the Unknown Caller tone. Then returned and changed the Known Caller tone.
This had no affect on the incoming call ring.
Still would not vibrate or ring.
So I was typing a message this morning when a call came in. Before I even realized it, the incoming call screen popped up and I hit the Decline button. Is there an app or mod or setting I'm not aware of that will keep the incoming call screen from coming up when another app is in use? I read that CyanogenMod has a setting like that. The phone rings and a notification appears but the Accept/Decline buttons don't pop up immediately. Is there a way to get that functionality on a Sense ROM?
ok this is a weird problem
my own fault
phone is the OnePlus one obviously.
have been having ongoing small problem with the dialer, as i use DW dialer.
sometimes when i went to make an outgoing call the stock dialer would also load and i would have to push the call button twice.
small problem but annoying.
so i went into the settings>apps>phone
and cleared the phone setting >launch by default.
this has fixed the outgoing calls problem
however now when i have incoming calls it doesnt bring up the window to let me answer them. the phone kind of hangs while the incoming call is ringing.
i can get back to the home screen. but there is no way to answer the call.
so i need a way to reassign the incoming calls to the phone.
i dont get any notification on the phone itself. just the ringing phone.
there is no way at all to answer the call - cant swipe down.
the only thing i can do is wait for the call to end. then see who is in my missed calls and ring them back.
please help
cheers
suttosnax said:
ok this is a weird problem
my own fault
phone is the OnePlus one obviously.
have been having ongoing small problem with the dialer, as i use DW dialer.
sometimes when i went to make an outgoing call the stock dialer would also load and i would have to push the call button twice.
small problem but annoying.
so i went into the settings>apps>phone
and cleared the phone setting >launch by default.
this has fixed the outgoing calls problem
however now when i have incoming calls it doesnt bring up the window to let me answer them. the phone kind of hangs while the incoming call is ringing.
i can get back to the home screen. but there is no way to answer the call.
so i need a way to reassign the incoming calls to the phone.
i dont get any notification on the phone itself. just the ringing phone.
there is no way at all to answer the call - cant swipe down.
the only thing i can do is wait for the call to end. then see who is in my missed calls and ring them back.
please help
cheers
Click to expand...
Click to collapse
I've been having this problem for a few days now. Phone rings but no UI for me to answer the phone call. Any solution to this yet? Thanks.
U have to tell which ROM u r using. There should be some option in settings for accidental phone wake up (Something like that), you have to disable that. Search in the settings.
I have updated to 5.1.1 but problem is its not showing the name when incoming call....only showing first letter of the name how can we find who is calling
I've just solved this problem on my phone - I'd blocked notifications from Dialler:
Settings --> App Notifications --> Dialler --> Deselect Block
Man!! This is a lifesaver. How come this solution is not available elsewhere. Thanks a lot!!!!
Rebooting clears the problem. Almost every day I find my phone with no ring tone. In settings, sound Phone ringtone any ringtone I select is silent. Incoming calls are hung up by this caller who keeps changing the number. I have hundreds of blocked calls I've added to call blocker. I use DW Contacts and Phone and Calls Blacklist Pro. I tried running without each of these and still happens. What can mute the Phone Ringtone? Is there a setting that will turn it back on without rebooting? Running AEX AOSP Extended Oreo.