I loaded WM6.5 ROM on my Treo 750.
Everything is great except one issue...
... I cannot set the Incoming Call Ring Tone.
When I go into the options of the phone, it is set to "none".
I set it to "Vibrate and Ring", then set a ring tone.
When I save/exit, it reverts back to "none".
I tried mid ring tones, wma, and mp3.
I tried ring tone only and vibrate only also...
... But no matter what I set it to, it keeps reverting back to none.
It WILL NOT ring or vibrate on incoming calls.
The SMS, Voice Mail, Missed Call, and email notifications all work fine.
ANY Help would be great!
Thanks
try first to change the other sounds , like unknown caller , and so , and then return to change the known caller...
libal said:
try first to change the other sounds , like unknown caller , and so , and then return to change the known caller...
Click to expand...
Click to collapse
Thank You for the reply!
There is no problem saving the settings in the Sound Notifications settings.
While on the dialer(Phone) screen, I cick Menu, then Options. This takes me right to the Phone Options page where I can set the folowing 3 options:
(1) Ring Type (Ring, Ring and Vibrate, Just Vibrate)
(2) Ring Tone
(3) Keypad Tone
While the Ring Type is set to "None", the Ring Tone box is grayed out.
I change the Ring Type to "Ring", I can then select a Ring Tone.
The only field that WILL NOT save is the Ring Type.
The Ring Tone still has the Ring Tone I selected in the box.
But the Ring Type keeps reverting back to "None".
But I did as you said (in sound notification settings)...
I changed the Unknown Caller tone. Then returned and changed the Known Caller tone.
This had no affect on the incoming call ring.
Still would not vibrate or ring.
Related
Great program, although even though most of my profiles are set to ring and vibrate they do not vibrate. When I go into Sounds & Notifications, it always defaults back to RING. If I select Ring & vibrate in the sounds & notifications, the vibration works. As soon as I select another profile, it reverts back to Ring only.
Any help would be great.
Note I have the O2 mini (magician)
i had the same problem but only on the silent mode.....every other mode is set to vibrate and ring and they work fine......first of all the sound and notification option on WM5 is no longer used once u have installed PPC ProfilesPro........well i dont use it anyway, and yes it always defaults to ring but this doesnt matter anymore....as long as u have set the ppcprofilespro setting to vibrate and ring this overrides the sounds and notifications settings on wm5........
basically what i did to get the vibrate mode working on silent mode is to set the volume "system" slider is not to set it all the way to the left....make sure you have at least one notch set to the right, it will make a sound only on normal programs but not on rings because u have to set the "ringer" slider all the way to the left and the "incall" slider obviously all the way to the right......
Hi
I got this weired problem with WM6.1 in my Treo750, Its not giving any sound for Known Caller, when I try to choose one from ring tones under Ring type for Phone:Known Caller is like Alarm, Alarm Flute etc. which was suppose to be Ring, Increase ring, Ring Once, Non.
If I try to change sound for any other like Missed call or Unknown caller then I am able to get that Ring, Increase ring, Ring Once and none but after I chose it doesnt save the detail. When I go back to the Ring type again it goes to Alarm, Alarm Flute only.
Does anybody have any idea why its acting like this or any solutions?
Thanks
Same issue here.
mniko said:
Hi
I got this weired problem with WM6.1 in my Treo750, Its not giving any sound for Known Caller, when I try to choose one from ring tones under Ring type for Phone:Known Caller is like Alarm, Alarm Flute etc. which was suppose to be Ring, Increase ring, Ring Once, Non.
If I try to change sound for any other like Missed call or Unknown caller then I am able to get that Ring, Increase ring, Ring Once and none but after I chose it doesnt save the detail. When I go back to the Ring type again it goes to Alarm, Alarm Flute only.
Does anybody have any idea why its acting like this or any solutions?
Thanks
Click to expand...
Click to collapse
For my Troe with WM6.1, I've got the different problem.
At Sounds & Notification > Phone : Know Caller > Ring Type
It show many ringtones in the handset like in Ring Tone, not the options for Ring, Increase ring, Ring Once and none
If anyone know how to solve this problem, please kindly advise me.
Many Thanks.
I had the same issue
What I did was to select a different option first.
Such as Reminders or Active Sync.
Then I would go back and select Phone: Known Caller
The field then would not be greyed out and select Ring Type: Ring
and Select Ring Tone: "Your Choice"
This worked for me the 2 times I reloaded 6.1
texastech31 said:
What I did was to select a different option first.
Such as Reminders or Active Sync.
Then I would go back and select Phone: Known Caller
The field then would not be greyed out and select Ring Type: Ring
and Select Ring Tone: "Your Choice"
This worked for me the 2 times I reloaded 6.1
Click to expand...
Click to collapse
This works for me but when i go back the ring tone is greyed our again. When a know caller calls the it only works once then i have to reset it again. I'm continuing to search for a solution. I'm not keen on having to go back to stock rogers 6.0
beginner's point of view
if u have downloaded ur 6.1 wm version from xda-developers
I think the problem is in the 6.1 "edited" version, when u remove the AT&T from the xda file.
if u've done that try to hard reset (or replace the edited file with the original one if u packed it before), and not remove at&t ringtone from the xda file.
hope i know what i am talking about here !!!!
Everything worked fine until I installed MS Voice command 1.6. At first incoming calls would still ring fine, but then I tried to enable the "announce incoming calls" option and instead the phone stopped ringing completely AND also did not announce incoming calls.
I've tried disabling that option, disabling Voice Command altogether, uninstalling Voice Command completely and rebooting, and all without success. Incoming calls produce no ring sound at all, under any circumstances. I've checked and double checked all sound & notification settings, ring volume, settings etc, and nothing makes any difference. Voice command must have changed some registry setting somewhere and I just cannot get it to change back, no matter what I do.
Can anyone help? Is there any way to restore the ring function? The little incoming call window pops up but there is just no ring sound, at all, ever. It works fine when I test/preview the ring under settings, but not when a call comes in!!
paleozord said:
Everything worked fine until I installed MS Voice command 1.6. At first incoming calls would still ring fine, but then I tried to enable the "announce incoming calls" option and instead the phone stopped ringing completely AND also did not announce incoming calls.
I've tried disabling that option, disabling Voice Command altogether, uninstalling Voice Command completely and rebooting, and all without success. Incoming calls produce no ring sound at all, under any circumstances. I've checked and double checked all sound & notification settings, ring volume, settings etc, and nothing makes any difference. Voice command must have changed some registry setting somewhere and I just cannot get it to change back, no matter what I do.
Can anyone help? Is there any way to restore the ring function? The little incoming call window pops up but there is just no ring sound, at all, ever. It works fine when I test/preview the ring under settings, but not when a call comes in!!
Click to expand...
Click to collapse
Have you tried backing up device and then doing a hard reset?
Hi I have a palm 750v and all of a sudden I cant change my ring tone ring tone is greyed out and under ring type where I should be able to chose ring it has all my ring tones. I have tried a hard reset and talked to palm no joy.
anyone know what I can do thanks.
Rebooting clears the problem. Almost every day I find my phone with no ring tone. In settings, sound Phone ringtone any ringtone I select is silent. Incoming calls are hung up by this caller who keeps changing the number. I have hundreds of blocked calls I've added to call blocker. I use DW Contacts and Phone and Calls Blacklist Pro. I tried running without each of these and still happens. What can mute the Phone Ringtone? Is there a setting that will turn it back on without rebooting? Running AEX AOSP Extended Oreo.