I have an unlocked Google Pixel that has a touch screen issue when booted into system (stock Android 10), where nothing works when touching the screen.
However, when I boot into TWRP 3.5.2_9-0, the touchscreen works and I can tap on all the buttons and even can perform a slide to enable system modification.
Anyone encounter this issue before have any suggestion? I tried wiping and reflashing using the latest available factory image, however nothing works.
Related
Here are the cliff notes of what happened:
1) my screen turned off immediately after I entered the password.
2) I dismantled the phone and cleaned all relevant parts, thinking the hardware may be sending a double-click signal when I pressed the button once.
3) Help forums led me to believe the problem was a software malfunction with the front-facing camera: A sensor that interprets darkness to mean the phone was in a pocket and should have a dark screen.
4) I decided to factory reset the device to repair any outstanding software issues.
5) The factory device setup screen loaded... and the screen went dark and would not come back on.
6) I have managed to reach the boot loader. Now I am stuck; I cannot find a way to install a functioning OS.
Back information: A year ago I was running CM12. For the last six months I've been running Kali; I've had a persistant issue being unable to upgrade to Android 5.1 with Kali, so I intended to go back to CM (but 13 this time).
So presently: Factory resetting will not work because the screen goes dark before I finish the prompt. The Boot Loader is open. My computer recognizes the device but I cannot save anything to it (so I can't put a new ROM on it).
Does anyone have any suggestions for this?
If you're in the bootloader have you tired flashing a stock factory image with fastboot?
Sent from my Nexus 9 using XDA-Developers mobile app
jd1639 said:
If you're in the bootloader have you tired flashing a stock factory image with fastboot?
Click to expand...
Click to collapse
I did; and it worked, but when the setup screen loaded (the language selection page) the screen went dark and the phone became non-responsive.
Did you try cleaning around the proximity sensor by removing all of the components that are set against the screen?
Try installing the oldest factory image you can find on the Google site.
I am using an mtk device, and flashed wrong boot.img and made my touchscreen uncalibrated both on android and TWRP, so i decided to use otg to flash stock boot.img, did that and rebooted and touchscreen was still uncalibrated, after that i formated System, data, dalvik and cache, and reinstalled stock rom. And touchscreen was still uncalibrated... Also tried flashing cm12.1+cmboot.img and didnt work either.
This device uses hardware keys, and the hardware navbar seems to have somehow go to the center of the screen (only responds there), and the bottom part of the screen responds on top part of the screen, and the top part of the screen is responding to botton part of the screen..
i have no idea of what to do now, please help me!
Device is eSmart H1 from Switel
My touch screen suddenly stopped working. The weird thing is that touch is not working only on the lower part. Remaining part it is working perfectly fine. OS using Lineage Android 7.1.1
What this problem might be is this hardware or software problem?
I checked whether this is software error. But when I enter TWRP recovery as I said only lower part of touch not working. It has become incredibly difficult to wipe cache and dalvik cache even in the recovery the touch is not working
Any suggestions how to make it work
kpsrikanth1994 said:
My touch screen suddenly stopped working. The weird thing is that touch is not working only on the lower part. Remaining part it is working perfectly fine. OS using Lineage Android 7.1.1
What this problem might be is this hardware or software problem?
I checked whether this is software error. But when I enter TWRP recovery as I said only lower part of touch not working. It has become incredibly difficult to wipe cache and dalvik cache even in the recovery the touch is not working
Any suggestions how to make it work
Click to expand...
Click to collapse
Change your display, it's cheap and easy,you can change yourself.
I'm trying to flash LineageOS 16.0, when I flash TWRP the screen is non responsive I can press a button and it will register as clicked but has no response, subsequent touches have no effect.
I am using a replacement screen I am assuming it's non genuine and there's a hardware bug. Has anyone else had this problem and found a solution? Is it possible to flash Lineage without TWRP?
Hi guys, I hope that somebody can help me I'm experiencing a black screen after the model logo. I think that the mobile still works (I can connect with Smart Switch, the alarms ring, the touch is working).
It has happened after the mobile has freezed and I've forced the shut down. Now I'm able to use the recovery and I've tried to wipe the cache, do a factory reset and flash an original firmware with Odin.
Do you have any other ideas? The mobile has the developer option not enabled and it's not rooted. Thank you
I'd like to try to flash a new kernel. Do you have any ideas how to enable the OEM unlock option? I could use a keyboard to navigate in the menus but I have no other mobile to check the steps.
If it helps, I've changed the screen because it was cracked, I've used it a bit and then the mobile has freezed trying to open an app. I had to force the shut reboot with the screen still working and after it I've started experiencing this problem.