To give some context, my S10e (Verizon SM-G970U) decided to boot loop out of nowhere. Since this happened, I have factory reset the phone, no success. I brought it to a local repair shop who said they couldn't fix it. Now I have flashed the phone with Odin and despite the phone being flashed it STILL is boot looping. At this point, I'm assuming something went wrong with the hardware but I don't even know where to start with that. If anyone has any suggestions I would greatly appreciate them.
Firmware used :
Download Samsung Galaxy S10e SM-G970U VZW USA (Verizon) G970USQU5GUBH firmware
Fast download latest Samsung Galaxy S10e firmware SM-G970U from USA (Verizon) with G970USQU5GUBH and Android version 11
www.sammobile.com
Vivala8955 said:
... it STILL is boot looping...
Click to expand...
Click to collapse
If it is a hardware issue (which sounds likely), there's an old electronics trick you might try: Power it off, put it in the refridgerator awhile, take it back out and power it on. This has work'd for me with stereo components, for example, as well as a phone. It once revived a hard disk drive long enough for me to capture important data. Oh, but the phone this has brought back for me, an S10e BTW, works only while still cold and has issues with charging while its temperature is low. Still may be worth a try.
MrGoodtunes said:
If it is a hardware issue (which sounds likely), there's an old electronics trick you might try: Power it off, put it in the refridgerator awhile, take it back out and power it on. This has work'd for me with stereo components, for example, as well as a phone. It once revived a hard disk drive long enough for me to capture important data. Oh, but the phone this has brought back for me, an S10e BTW, works only while still cold and has issues with charging while its temperature is low. Still may be worth a try.
Click to expand...
Click to collapse
Wow, I just did this and to my surprise it worked! Prior to this, I wasn't able to get past the Google sign in page on start up (on good attempts) but now I was able to get it all the way to the homescreen and even install some apps before my battery died. Any idea of what this could mean for the actual hardware? I.e. this means the battery needs to be replaced etc
Vivala8955 said:
Wow, I just did this and to my surprise it worked! Prior to this, I wasn't able to get past the Google sign in page on start up (on good attempts) but now I was able to get it all the way to the homescreen and even install some apps before my battery died. Any idea of what this could mean for the actual hardware? I.e. this means the battery needs to be replaced etc
Click to expand...
Click to collapse
Great; glad it work'd. Did you attempt to charge it while it was working? Mine actually took charging after warming up only a short time, once. Got it back all the way to 100% charged. But then it quit with dead black screen, and now revives only for a minute or two.
In the old days of individual transistors, we used to turn on a non-working electronic device and blast a shot of freeze spray on various components until the device started working; even with IC (integrated circuit) chips that have lots of transistors. This way, we knew which part needed replacement. But with today's phones, you replace the entire circuit board because the soldering is done by machines; it's too finely detail'd to replace one chip.
MrGoodtunes said:
Great; glad it work'd. Did you attempt to charge it while it was working? Mine actually took charging after warming up only a short time, once. Got it back all the way to 100% charged. But then it quit with dead black screen, and now revives only for a minute or two.
In the old days of individual transistors, we used to turn on a non-working electronic device and blast a shot of freeze spray on various components until the device started working; even with IC (integrated circuit) chips that have lots of transistors. This way, we knew which part needed replacement. But with today's phones, you replace the entire circuit board because the soldering is done by machines; it's too finely detail'd to replace one chip.
Click to expand...
Click to collapse
I haven't tried charging the phone when it's on. Only when it's off and has returned to room temperature. Seems to me that about an hour in the fridge equals about 5 minutes of screen on time until the phone heats up again.
As for the internal component's you bring up a good point. Even if I were to determine what is causing the issue, I don't have the will/technical know how to buy the parts and do it myself. Outside of just replacing everything, in which I'd just buy a new phone haha.
Vivala8955 said:
... I'd just buy a new phone ...
Click to expand...
Click to collapse
That's what I did. Look'd at lots of possibilities, ended up buying another S10e.
Related
Soo I have a big problem,
My sidekick 4g suddenly shut off and directly went into Download Bootloader. It would only stay in that window for about 3 seconds then restart. So I tried doing Odin but it would never stay in download mode long enough. After a while, the phone stopped turning on and now it does not even charge. I believe I have hard bricked the phone. When I leave it on the charger. I see no indication that it is charging but the battery gets warm. Is there any hope for me to fix this phone?
Please let me know ASAP. Thanks!
helodavelo said:
Soo I have a big problem,
My sidekick 4g suddenly shut off and directly went into Download Bootloader. It would only stay in that window for about 3 seconds then restart. So I tried doing Odin but it would never stay in download mode long enough. After a while, the phone stopped turning on and now it does not even charge. I believe I have hard bricked the phone. When I leave it on the charger. I see no indication that it is charging but the battery gets warm. Is there any hope for me to fix this phone?
Please let me know ASAP. Thanks!
Click to expand...
Click to collapse
Does the device even show up as a USB vendor/product id? See that with `lsusb` on Linux or the Device Manager on Windows.
It might be worth trying ayoteddy's FOOL PROOF WAY TO GET INTO DOWNLOAD MODE here:
http://forum.xda-developers.com/showthread.php?t=1186954
Perhaps if you trigger the phone to enter download mode that way, it won't just continually reboot...
Beyond that, I think you'll be looking at hardware-level fixes. If the phone isn't literally fried, it can almost certainly be repaired with JTAG. But that would involve a JTAG interface which I am guessing you don't already have.
You might be able to find someone who will JTAG for you for free, or for a fee. A local phone repair shop might have this capability.
If you're damn good with a soldering iron, or have a friend who is, there's also AdamOutler's "UnbrickableMod":
http://forum.xda-developers.com/showthread.php?t=1347984
That mod is not for the feint of heart, you need to take the phone almost entirely apart and do soldering work within the area of a grain of rice... but it is possible.
But all the options assume that the only problem with the device is a bad flash -- damaged boot loader, bad kernel/recovery, etc. The way you describe your phone's demise, a hardware failure certainly seems like a possibility.
Good luck, I hope your device is not dead.
FWIW, SK4G goes for ~$100-200 on eBay these days depending on condition. Locally you could probably find lower prices.
Wow thanks for all the info but i tried ayoteddy. Since the phone doesnt even power on , i cant do what teddy says. And no, after a few failed odins, the comp doesn't even see the phone. But that's also because the phone doesn't turn on. I even put a charged bat. Still no go
helodavelo said:
Wow thanks for all the info but i tried ayoteddy. Since the phone doesnt even power on , i cant do what teddy says. And no, after a few failed odins, the comp doesn't even see the phone. But that's also because the phone doesn't turn on. I even put a charged bat. Still no go
Click to expand...
Click to collapse
It really sounds like a hardware failure.
If you are committed to trying everything to rescue your particular device, you could double down and try a new battery. You risk wasting whatever money you spend on it, of course.
If I recall correctly, the SK4G can't operate properly without some battery current, even when plugged into USB. And the other symptoms seem to leave the door open on battery problems -- sudden power down, brief signs of life which eventually cease, hot battery. The sudden failure of a lithium battery would hardly be unusual.
I have seen an issue very similar to this before. It turned out to be a loose connection inside the phone. Might want to disassemble and reassemble carefully to ensure that the connections are secure. Youtube has dis-assembly videos to guide you. You don't have to completely disassemble the phone, just til you reach the main board and secure the connections to it. If you don't feel like you can hand the task of dis-assembly you could always search for a local phone repair business, or even computer repair shop (they often do some phone repairs). Hope this helps
Hey there, I am trying to fix a SK4G with the exact same problems... download mode will show up, but then the screen will go blank again. I'm gonna look into what blk2dr suggested... did you ever fix yours, OP?
root? so Warranty it, not saying its the most "ethical way"
out of curiosity what was the last, well as samsung would put it, hac...ERRRR unsupported warranty voiding modification known to us as upgrade/flash eg. via cwm odin rom app add on modem kernel etc. that was done to the ol SK? or is it just straight up faulty craftsmanship from samsung...nooooo on a SK4g??? is that possible? lol moving a rom around from folder to root of sd once (zip prev passed md5 check) my 2nd or was it 3rd t839 had a lil hiccup that i didnt realize at the time made my custom Roms zip like 47kb smaller then it previously was and should of been, when flashing is 2nd nature and ur just moving it within the same sd card its already checked out on the md5 sum and ur dealing with a 200+/-mb file, whos gonna notice that minor change? to make a really long story just kinda long, into voodoo cwm flash, let it marinate... phone ran great for 4 days, then i decided i was going to clear cache davlik fix permish and reboot...yea went into cwm wiped wiped and half way thru fix permish phone crashed rebooted back into recov, when i tried to reboot sys it had your same exact issue. DL mode for just a second...then all black yet slightly backlit screen. could never get it to stay long enuff to odin back to stock, fullproof DL mode was a no go and of course the battery died, wouldnt recharge. i played dumb went to tmo store dude tesed phone with new batt my batt in other sk etc etc...anyways he charged my battery up enuff it flared back into dl mode for a few sec...my fix? hours and days headin into weeks of jackin with this thing i went with my cure all root REUPwarranty fix...flash a bad freakin bootloader thru odin and kill it once ad for all, DL mode only needs to be on about 4 sec, not long enough to go back to stock rom but long enuff to kill that B. prefered bootloader is i9000 haha works like a champ everytime to every rooted phone that had issues i needed a warranty exchange on(only been 4) seeing how i get a new phone every 3months on avg and always pay full price the ratio is tiny. yeah i know the trickle down effect raising costs from manufacture in long run yadayada. all is true, but i figure ive been kicked in the groin so many times by samsung,lg,moto,htc etc they can eat 1 every now and then. as a tmo employee in 07/08 i paid 500 upfront for the mda that got back ordered for 6 months had 2 bad dead spots in the touch screen within a month and screen went completely white in 3mnths. some employee/warranty fine print screwed me out of a new phone. and dont even get me started on the sidekick. 399 bucks for a phone that basically got abandoned 3 months later cuz it was junk compared to what it should be and breaks in high quanities. theyll still tax u 20 bucks and make u keep ur old battery and cover charger etc so im not losin any sleep, for real kill it for good, run it to the store get ur new err rebuilt refurb SK4g in 2 days then save up for a t989 s2 dl gmote/spashtop and poweramp on ur SK4g and let her roll as a wireless keyboard/mousepad for ur pc and let the voodoo and Pamp rock as a killer mp3 player. thats all the T-urd-839 is really good for anyways, oh yea and a mediocre bt controller for playin games on my S2's lol do the warranty, its samsung/TMOs fault for lettin this junk product get released, abandoning it and overcharging so many of us. Just do it, do it lol
pull battery, connect usb, hold power, volume up, volume down, camera, and tackpad and insert battery. It should FORCE the phone into download mode.
try it lol~
Hi,
Yesterday (08/02/2013) I updated my tf700t, everything seemed to be fine after it rebooted, I was playing a game, the battery was low, and it turned off abruptly. I assumed it automatically shutdown because of the battery, so I put it in the dock and plugged in the charger. Several hours later I tried turning it on and nothing. I held down the power button for 8 seconds felt the double vibration, but no display. I tried various combinations of docked/undocked, power cord plugged in, holding the power button for 30-60 sec. etc. but nothing.
Out of curiosity I connected the HDMI to my computer monitor and sure enough, it was there, I could unlock it and everything seems to be functioning fine, just no display. The digitizer seems to work fine, although guessing where things are at is pretty tough.
I think I tried the cold boot, volume up/down (I tried both) plus power, and it didn't make a difference.
In order to do the update I had to flush the DMC Client and CMClient data and cache, I had been getting errors from DMC Client crashing.
Also I'm not certain this is update related, as the tablet had been acting wierd, which is why I did the update. I would press the power button to turn the screen on and nothing would happen, so I'd hold it down longer and the tablet would reboot and finally the screen would come on, or it would come on a few seconds after I pressed the button. I was getting a lot of reboots etc... I thought the update might resolve this.
I'm not sure if the problem is hardware, firmware, or software related.
I'm wondering if when I flushed the DMC and CM Client cache, maybe I deleted the drivers for the display or something?
My options seem to be:
1.) Factory reset by feeling around the digitizer while connected to HDMI
2.) Factory reset via the pinhole
3.) Install new (old) firmware via usb/computer. (the device is recognized by Windows 7 so I think this is doable.)
4.) Send it off to Asus. (would this be free?)
So my questions are:
1.) is there something else I should try?
2.) what order should I do the above in?
*Note: I'd like to save my data somehow.
*Edit: I forgot to mention I was on 4.2.1, no root or anything. Also I bought this in July of '12 so I'm pretty sure it is out of warranty. Any idea how much it might cost to send it off? Perhaps I could replace the LCD myself? I replaced the digitizer/screen on an ipod touch, although I'm sure this LCD is much more expensive and much harder to replace. This is turning into a nightmare. So much for trying to keep my data, now I hoping to keep this from becomming a paperweight.
Thanks.
A bloke at work had this issue. He let it rundown and left it for 3 days. It worked fine again after that.
zpyatt said:
I'm not sure if the problem is hardware, firmware, or software related.
Click to expand...
Click to collapse
If you don't even see the boot logo, it cannot be software related.
Thanks for the replies.
I'll try letting it run down. Would putting it in the freeser be helpful/safe?
I guess on the software/firmware it depends on the definition. To me drivers are software, firmware is anything written in VHDL. I suppose what I'm really wondering is if it is software/firmware vs. hardware, i.e. is the LCD or some other component dead or is the display just not getting written to, initialized or whatever.
zpyatt said:
I'll try letting it run down. Would putting it in the freeser be helpful/safe?
I guess on the software/firmware it depends on the definition. To me drivers are software, firmware is anything written in VHDL. I suppose what I'm really wondering is if it is software/firmware vs. hardware, i.e. is the LCD or some other component dead or is the display just not getting written to, initialized or whatever.
Click to expand...
Click to collapse
I wouldn't put the tablet into the freezer.
Does the backlight come on? If not, it's definitely a hardware problem. If the bootloader boots fine but doesn't show anything, that also looks like a hardware problem.
_that said:
I wouldn't put the tablet into the freezer.
Does the backlight come on? If not, it's definitely a hardware problem. If the bootloader boots fine but doesn't show anything, that also looks like a hardware problem.
Click to expand...
Click to collapse
I'm not sure about the backlight, I think maybe it does, it is kind of hard to tell. I'll try checking in a dark room tonight. Since the screen is just black I suppose I'm looking for a brighter shade of blackness?
The bootloader is definitely booting fine. That is what I meant in my original post, the HDMI out works, I can see everything there, I can even swipe and tap the digitizer and do stuff, it is just difficult to guess where things are at. Do I need to go back and clarify this in my original post?
Do you think this definitely means it is a hardware problem? I figure I'll try letting the battery run all the way down and let it sit a few days and recharge it as sbdags suggested, in the meantime perhaps I should contact Asus, but I'm not lookinf forward to that.
zpyatt said:
I'm not sure about the backlight, I think maybe it does, it is kind of hard to tell. I'll try checking in a dark room tonight. Since the screen is just black I suppose I'm looking for a brighter shade of blackness?
The bootloader is definitely booting fine. That is what I meant in my original post, the HDMI out works, I can see everything there, I can even swipe and tap the digitizer and do stuff, it is just difficult to guess where things are at. Do I need to go back and clarify this in my original post?
Do you think this definitely means it is a hardware problem? I figure I'll try letting the battery run all the way down and let it sit a few days and recharge it as sbdags suggested, in the meantime perhaps I should contact Asus, but I'm not lookinf forward to that.
Click to expand...
Click to collapse
I don't know what is the cause but like I said I saw this with my very own eyes - the same as yours. Double buzz on boot not screen but HDMI worked. Somehow completely draining the battery fixed it ...... So hardware / software? Who knows? If it was hardware why did draining the battery fix it? The device has been absolutely perfect for 3 months since and has never done it again.....
sbdags said:
I don't know what is the cause but like I said I saw this with my very own eyes - the same as yours. Double buzz on boot not screen but HDMI worked. Somehow completely draining the battery fixed it ...... So hardware / software? Who knows? If it was hardware why did draining the battery fix it? The device has been absolutely perfect for 3 months since and has never done it again.....
Click to expand...
Click to collapse
Thanks sbdags, I will definitely try this. I'm not sure if I should hurry and contact Asus though, I bought this thing around July 22 2012 I think so it is barely more than a year old, not sure if they would cut me some slack on the warranty or not.
Do you think I need to let it sit three days or just make sure the battery is good and run down before charging again? Also I've seen some suggestions for charging from a computer vs. wall as it charges slower, do you think that would be better?
I'm getting into panic mode and want to make sure I don't do anything rash that limits my options.
zpyatt said:
Thanks sbdags, I will definitely try this. I'm not sure if I should hurry and contact Asus though, I bought this thing around July 22 2012 I think so it is barely more than a year old, not sure if they would cut me some slack on the warranty or not.
Do you think I need to let it sit three days or just make sure the battery is good and run down before charging again? Also I've seen some suggestions for charging from a computer vs. wall as it charges slower, do you think that would be better?
I'm getting into panic mode and want to make sure I don't do anything rash that limits my options.
Click to expand...
Click to collapse
All he did was leave it for 3 days. Our assumption was that the battery had completely drained in that time....... A charge later (he was actually just about to box it to send to Asus) and it surprisingly started as if nothing had happened.
Having the same problem
I am having almost the same problem, except that the tablet screen works when the wall charger is plugged in. THe HDMI display and the digitizer work fine. It is just the tablet's screen dispaly when the charger is unplugged.
sbdags said:
All he did was leave it for 3 days. Our assumption was that the battery had completely drained in that time....... A charge later (he was actually just about to box it to send to Asus) and it surprisingly started as if nothing had happened.
Click to expand...
Click to collapse
So I didn't have any luck letting it run all the way down.
I contacted customer support, the warranty is only 1 year, but fortunately for this there is an extra 3 months, so I just managed to squeak by, although I'm keeping my fingers crossed.
same problem as you both
i have d same problem well until last week the screen displays when conne ted to wall charger now its all blank but iy works via hdmi, digitizer works fine but all blank, this tf201, does anyone know if i change d whole display it will work?
i already bought the tf701
any suggestions is welcomed and did you get youra to work?
zpyatt said:
I guess on the software/firmware it depends on the definition. To me drivers are software, firmware is anything written in VHDL.
Click to expand...
Click to collapse
I have not seen people mentioning VHDL and verilog for a while, hahaha... It sounds like you are a low level or physical layer programmer. Any way, a firmware is in general a low level program that communicating with the hardware and the software or high level program ( level 7).. If you will, a firmware is a management levels (level 2 and 3). A VHDL is a level 1 which generates a 0's and 1's or mapping the transistors in the FPGA chip for example.... Oh well, it is just my definition...
zpyatt said:
I suppose what I'm really wondering is if it is software/firmware vs. hardware, i.e. is the LCD or some other component dead or is the display just not getting written to, initialized or whatever.
Click to expand...
Click to collapse
If you can get the output from the HDMI port, it is more likely you have a hardware problems. I think that the problems are your display related hardware. If you really want to troubleshoot your issues, you can look on the mother board to locate all the electrolytic caps and check to see any abnormal signs of those capacitors. Those caps are the one that will blew up first before any others parts go....Good luck...:fingers-crossed:
As you can see in thread, phone just dead. Dunno what happened. I bought it an year ago. I've tried to connect it to computer and it was visible as QHSUSB bulk but now i can't see it there. It doesn't react for turning on. I can't get into download mode, recovery mode. Very long time ago i flashed Android MM from xda and it was working good. It had ~50% of battery when died. I've tried to put off battery and then connect to pc but still nothing happen. It has broken screen (was working good) but i've done it in September 2016 so. I can connect it to Linux but i think it won't help too. Any fixes? I think they won't take It at warranty because of screen. Phone looks like dead for ages :<. @edit IT'S NOT DEAD! I've disconnected something from battery this longer one and when i click power i can hear "something" in the phone. And it gets heater so looks like processor is working. But it's still not visible in the device manager.
edit2
i know emmc pinouts.
While I was using the phone, with battery at 66%, the exact same thing happened to mine. I'm sick of it. Time for a new phone.
(Had the rooted V15c image on it, no broken screen, only the camera issue - should someone care)
Same problem here, what is happening . My phone was approximately 80-90% and it suddenly turned off and I can't turn it on ..
bump
Phone went black with warning
The same just happened to mine. It was fully charged and I was using it and then the screen went black. There are no lights when I plug it in, no vibration after pressing and holding the power button. Nothing
I've connected it to my pc and a driver installed, I think the same one as a post above (QHSUSB) but still the phone doesn't respond in any way.
It's the European H955 on official MM 6.0.1 no root or mods and is out of the one year warranty yet was in excellent condition. Does this mean the phone is for scrap and nothing can be done?
Hi, I found a solution to repair the phone in this state. I start by telling you a story, a long time ago I had an HP laptop. video card was detachment from motherboard, and to a stick again we used a method called reflowing. I thought that the phone has the same problem, however we have nothing to lose so I opened the phone I took out the motherboard and started to warm up each chip using a hot air blower. I mounted the phone back and now works like new. I apologize for my bad English I am from Romania.
alex_otopeni17 said:
Hi, I found a solution to repair the phone in this state. I start by telling you a story, a long time ago I had an HP laptop. video card was detachment from motherboard, and to a stick again we used a method called reflowing. I thought that the phone has the same problem, however we have nothing to lose so I opened the phone I took out the motherboard and started to warm up each chip using a hot air blower. I mounted the phone back and now works like new. I apologize for my bad English I am from Romania.
Click to expand...
Click to collapse
Any one tried this method and succeeded may please inform on this forum
My phone crashed, would reload to lock screen then restart and finally would not start at all. Before this the rear camera stopped working.
I had reset, flashed a new Rom and replaced the Camera which didn't solve the issue.
After the phone died I tried reflowing though I had no heat gun so I just used the oven. 200c for 7 minutes after disassembly.
That was about 8 hours ago and I am typing on my phone.the Camera is also working.
I will post if it stops again. I did it as the phone was dead and I had nothing to lose.
I have the same problem, and I am interested in getting a heat gun for this purpose. What specific parts of the phone did you reflow/heat? (in terms of the chips, or the entire board.)
Thanks in advance.
xaresys said:
I have the same problem, and I am interested in getting a heat gun for this purpose. What specific parts of the phone did you reflow/heat? (in terms of the chips, or the entire board.)
Thanks in advance.
Click to expand...
Click to collapse
I did not heat the whole motherboard, just the chips under the shields.
Oven Phone Fix?
clb2c4e said:
My phone crashed, would reload to lock screen then restart and finally would not start at all. Before this the rear camera stopped working.
I had reset, flashed a new Rom and replaced the Camera which didn't solve the issue.
After the phone died I tried reflowing though I had no heat gun so I just used the oven. 200c for 7 minutes after disassembly.
That was about 8 hours ago and I am typing on my phone.the Camera is also working.
I will post if it stops again. I did it as the phone was dead and I had nothing to lose.
Click to expand...
Click to collapse
What part of the phone did you reheat exactly? The whole phone? or did you take all the plastic out?
This part here: http://m.ebay.com/itm/OEM-AT-amp-T-LG-G-FLEX-2-H950-REPLACEMENT-32GB-LOGIC-BOARD-MOTHERBOARD-ORIGINAL-/141923410166
Also be sure to take off the rubber part on the back. The purpose is to remelt the solder.l, so only board and nothing else.
To disassemble there are some videos on YouTube. Remove your sim card before taking off the backing
Remember this is a last resort, you could end up with a completely dead chip.
clb2c4e said:
This part here: *link*
Also be sure to take off the rubber part on the back. The purpose is to remelt the solder.l, so only board and nothing else.
To disassemble there are some videos on YouTube. Remove your sim card before taking off the backing
Remember this is a last resort, you could end up with a completely dead chip.
Click to expand...
Click to collapse
Thanks for the information. Is there a specific way you have to remove the shields, or do I use a soldering iron to get it off? (And if so, does it do any good to solder them back on?)
clb2c4e said:
This part here: http://m.ebay.com/itm/OEM-AT-amp-T-LG-G-FLEX-2-H950-REPLACEMENT-32GB-LOGIC-BOARD-MOTHERBOARD-ORIGINAL-/141923410166
Also be sure to take off the rubber part on the back. The purpose is to remelt the solder.l, so only board and nothing else.
To disassemble there are some videos on YouTube. Remove your sim card before taking off the backing
Remember this is a last resort, you could end up with a completely dead chip.
Click to expand...
Click to collapse
Did it 395 degrees Fahrenheit (201.66 Celsius) for 7 minutes, I preheated the oven. The camera and everything now works fine.
xaresys said:
Thanks for the information. Is there a specific way you have to remove the shields, or do I use a soldering iron to get it off? (And if so, does it do any good to solder them back on?)
Click to expand...
Click to collapse
You shouldn't have to use a soldering iron to take anything off. At least not as far as I am aware of.
I should note that as of this morning my phone when blank and will no longer turn on. I will try reflowing at a higher temperature as some solder may need a higher heat but I am not optimistic that this is a permanent fix.
Hey everyone !
First try to connect it in emergency mode to the computer in order to flash with LG UP. If you cannot boot into emergency mode but the device appers on your computer ( and PC is unable to connext into GF2) maybe you could burn your motherboard.
I burn one 7 months ago with my device resting on my pocket so its a common problem for this device (as official support told me so its full covered by guarantee )
Hope you can solve soon !!!
Hi, my situation is; got a galaxy s7, the rear camera was bad, bought a new original one, stripped the phone down, fitted the camera, followed the tutorial (ifixit), put a new battery in at the same time, now rebuilt it all, (without the rear case on so can still easily take it apart again) and it wont turn on, wont go into safe mode, recovery mode, soft reset etc, tried every method, also via usb to my laptop, however it does charge, it comes up on the screen with the green battery icon and the LED light illuminates as if it is charging. Therefore, the screen is not damaged. And as far as i can see, all the connections are back joined onto the motherboard, it just wont boot up.
Also, if this makes any difference, I am running the Superman rom.
Any help would be massively appreciated as I have scowered so many websites searching for someone with a similar issue with a solution and I'm struggling, massively!
Are you sure you have connected the battery as required and no other circuit was touched?
Also, do you have the certainty this "new" battery works? I suggest you do the next 2 things:
1. Take this battery out and connect your old one. this way you can check if the new battery is faulty.
2. If doesn't work, even after inserting again the old battery, take your phone to a local repair center. (probably you messed something up).
marcusn said:
Hi, my situation is; got a galaxy s7, the rear camera was bad, bought a new original one, stripped the phone down, fitted the camera, followed the tutorial (ifixit), put a new battery in at the same time, now rebuilt it all, (without the rear case on so can still easily take it apart again) and it wont turn on, wont go into safe mode, recovery mode, soft reset etc, tried every method, also via usb to my laptop, however it does charge, it comes up on the screen with the green battery icon and the LED light illuminates as if it is charging. Therefore, the screen is not damaged. And as far as i can see, all the connections are back joined onto the motherboard, it just wont boot up.
Also, if this makes any difference, I am running the Superman rom.
Any help would be massively appreciated as I have scowered so many websites searching for someone with a similar issue with a solution and I'm struggling, massively!
Click to expand...
Click to collapse
I'd start by reversing everything you did until it powers on again, if it still doesn't power on with the old camera module & old battery in then start looking at other things, i'd probably start with the battery though as it is a power issue
The new battery charges and it comes up on my screen showing the green battery image charging so it is being recognised. Tried the old battery and its the same situation. I genuinely believe I didnt accidently short anything and im confident everythinf is where it needs to be. Ive just booked in to go to the samsung shop this weekend so hopefully they manage to find skmething althpugh probably end up costing a daft amount. Thanks for the replies so far
marcusn said:
The new battery charges and it comes up on my screen showing the green battery image charging so it is being recognised. Tried the old battery and its the same situation. I genuinely believe I didnt accidently short anything and im confident everythinf is where it needs to be. Ive just booked in to go to the samsung shop this weekend so hopefully they manage to find skmething althpugh probably end up costing a daft amount. Thanks for the replies so far
Click to expand...
Click to collapse
New camera module? Did you remove it to see if it is causing the problem?
I know there are different sensors, and if the wrong one is replaced the camera won't work, not heard about it stopping the phone booting but you never know
Just taken it to the local phone repair shop, lets hope they can find something with it. Keep you updated. Thanks so far.
Hi,
I was just looking at a zoom video and had a lot of apps open in the background and the battery was around 50%. Then my screen froze, then I tapped a bit on the screen and it went black. I tried to soft reset and it vibrated for a second and nothing happened. I let it sit on the charger for a while and nothing. Put it on the portable charger and nothing. Same with trying hard and soft reset. The phone apparently pulls low voltage per UBreakifix. They said they saw 20 phones that had random issues after the last Samsung update including S21's. Mine just installed a few days ago. I have no idea what to do, but need the screen recordings of my relative that died and the voicemails that were exported to sound. Please help! Samsung said could be a short and then said they would replace the motherboard. I want the data not the phone.
Could I just be unlucky and it is simply a battery that died completely? Would the Samsung store be able to flash a new or older firmware without losing the files?
flashing would basically make your device a 'new' device... the only thing that comes to mind to keep your data is salvaging the parts (which would be labor intensive as it's basically re-building a phone by hand while it's not clear which among all the parts is/are defective, and even then the parts need to work smoothly together). If you have auto backup setup for the device, it's possible things like messages are saved.
Other than that, you would have to find professionals who are experienced in data restoration.
Sounds like a bad mobo.
You could try replacing the battery, maybe a C port PCB failure.
Other than that as mentioned by TheNewGuy92, a data recovery specialist. The memory may already be unrecoverable though especially if that chipset is the one that failed.
Always back up critical data redundantly... says us who have already lost databases.
S10eandtears said:
... Could I just be unlucky and it is simply a battery that died completely? ...
Click to expand...
Click to collapse
Maybe. When my first S10e (bought a second S10e due to so much trouble with first) suddenly dies (which it has done several times now), I have found temporary success by opening the back cover, removing 8 tiny screws to take out top mid-frame, and disconnecting the battery. After waiting a few minutes, I reconnect the battery, put phone back together, and begin charging. At this point, phone is charging while power'd off, and shows 0% for battery level; even after showing like 80% or higher when it black'd out. Then it showly increases from 0% up, at some point over 50%, I reboot; and it works okay until the next black out.
To disconnect battery, I do something like steps #1 through #19 here:
Samsung Galaxy S10e Screen Replacement
Follow this guide to remove and replace a...
www.ifixit.com
MrGoodtunes said:
Maybe. When my first S10e (bought a second S10e due to so much trouble with first) suddenly dies (which it has done several times now), I have found temporary success by opening the back cover, removing 8 tiny screws to take out top mid-frame, and disconnecting the battery. After waiting a few minutes, I reconnect the battery, put phone back together, and begin charging. At this point, phone is charging while power'd off, and shows 0% for battery level; even after showing like 80% or higher when it black'd out. Then it showly increases from 0% up, at some point over 50%, I reboot; and it works okay until the next black out.
To disconnect battery, I do something like steps #1 through #19 here:
Samsung Galaxy S10e Screen Replacement
Follow this guide to remove and replace a...
www.ifixit.com
Click to expand...
Click to collapse
Try replacing the battery. Maybe a bad battery controller chip.
TheNewGuy92 said:
flashing would basically make your device a 'new' device... the only thing that comes to mind to keep your data is salvaging the parts (which would be labor intensive as it's basically re-building a phone by hand while it's not clear which among all the parts is/are defective, and even then the parts need to work smoothly together). If you have auto backup setup for the device, it's possible things like messages are saved.
Other than that, you would have to find professionals who are experienced in data restoration.
Click to expand...
Click to collapse
I ended up paying for data recovery and they swapped over my components on to a donor motherboard. The interesting thing was the phone was dead again once it got to me but they extracted everything to a usb for me.
S10eandtears said:
I ended up paying for data recovery and they swapped over my components on to a donor motherboard. The interesting thing was the phone was dead again once it got to me but they extracted everything to a usb for me.
Click to expand...
Click to collapse
Yay! May I ask roughly how much did that cost?
Who did the recovery?
Mark Shaffer at iPad rehab. First invoice for expedited assessment was second was.
$108.63
$1,314.36
S10eandtears said:
Mark Shaffer at iPad rehab. First invoice for expedited assessment was second was.
$108.63
$1,314.36
Click to expand...
Click to collapse
So slow boat would have been $108.63?
That's not bad. Glad you where able to recover your data. Lost things can haunt you for a lifetime...
blackhawk said:
So slow boat would have been $108.63?
That's not bad. Glad you where able to recover your data. Lost things can haunt you for a lifetime...
Click to expand...
Click to collapse
No that fee was just to have your phone looked at sooner. Still would have been 1200 plus tax for data recovery with donor board.
S10eandtears said:
No that fee was just to have your phone looked at sooner. Still would have been 1200 plus tax for data recovery with donor board.
Click to expand...
Click to collapse
Still reasonable. I figure it be in the thousands.
The important thing is they did recover the data!
blackhawk said:
Still reasonable. I figure it be in the thousands.
The important thing is they did recover the data!
Click to expand...
Click to collapse
Agreed it wasn't too bad all things considered.