I got a bluetooth dongle (http://dealextreme.com/details.dx/sku.11866) and I got it working and its working overall pretty well. But now all the sudden when I plug my phone in though USB it doesn't work anymore. It still charges but now it doesn't do anything when connected via USB. Activesync doesn't recognize it and doesn't do anything at all when I plug in my HTC Fuze through USB.
I like bluetooth but I like using my phone for tethering and not to mention bluetooth burns through battery.
So what could be going wrong?
I have no idea what could have messed it up because it just all the sudden stopped working. I have tried everything and yet nothing helps. I uninstalled and reinstalled a couple times and looked through all the drivers. Usually I hate posting threads like these asking for help but I really have nothing left to do anymore.
*posted previous thread in wrong section*
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
paniqueado said:
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
Click to expand...
Click to collapse
I believe i read that there is a specific app that you have to run on these to do the mirror link...easy connect, maybe? Did your HU come with an instruction booklet? I was looking through mine earlier and it went over in detail how to setup mirroring through that app.
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
paniqueado said:
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
Click to expand...
Click to collapse
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
JordanB said:
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
Click to expand...
Click to collapse
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
I seem to have USB connection working now with only one "allow USB Debugging?" popup, only when I first connect.
What I did was turn wifi off on the headunit. I am not sure why it worked, but I just wanted to turn everything not needed off, and see if the headunit would stop disconnecting all the time. So far so good. I can probably live with one annoying popup, instead of one every few minutes.
Of course you have to keep the screen on the phone on, and the battery in the phone will deplete faster than the headunit charges it, but still an improvement. I had a 30 minute drive today, and the USB never disconnected!
paniqueado said:
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
Click to expand...
Click to collapse
paniqueado, try the da_anton ROM. I just installed it and easyconnect finally works as it should. I just plug in my phone to the USB and it fires right up! One prompt if any on the head unit, and NO disconnects whatsoever.
I'm not sure what exactly happened but I've been pairing with my old Nexus through bluetooth for a while now with no problems, and suddenly I stopped being able to connect to it or any other device. I can turn on bluetooth, see devices, and even pair but when I press on a device name to connect it says "connected" for about half a second and then disconnects immediately. Thought it was the Nexus but I am unable to connect to any other devices.
I tried rebooting, un-pair and re-pair, clearing bluetooth cache/data, clearing dalvik, but nothing.
The weird thing is that this actually happened a while back, and when I turned off developer mode it started working again. But now that's not doing anything.
I saw that there are a few old threads about others with bluetooth problems. Has there been a fix for this?
I'm running RR on 6.0.1.
Thanks in advance!
I'm writing a cordova app that was starting bluetooth just fine until, without any known change, it suddenly just hangs and my gui just sits there like duh forever. note 4 android 6 cant root it so ive got the bloat and the upgrade cycle slooowdown
PLEASE HELP (MAZDA 3 2018 AND SAMSUNG GALAXY S20+)
Can anyone help me? I recently just received my aawireless and my first setup process went smoothly. However on my second attempt to wait for my phone (Samsung S20+) to connect, it took awhile so I became a little worried (should of waited abit more) and I tried to troubleshoot the waiting time by unpairing it from my bluetooth devices on my phone so i can pair to it again, which i never happened. I then proceeded to do a reset by sticking a pin on the reset button, which i dont know if it worked because it doesnt signal me if it worked. (Attempted to click the reset button multiple times) The reset button did not help or change anything. However, when i went to reinstall my aawireless app, it is now prompting me to connect to an aawireless unit which I did attempt multiple times. As i tried multiple times for the app to find the device, it said device cannot be found. The LED light is always flashing a slow steady green light. Can anyone help? I have messaged Emil via Indegogo.
AAWireless has its own thread:
AAWireless - General discussion and support
This thread is dedicated for AAWireless users. AAWireless is a device which allows you to transform your existing wired Android Auto compatible unit into a Wireless Android Auto unit. General chat, experience sharing and community support...
forum.xda-developers.com
Hi,
I just updated to the Android 13 OTA on the S22 Ultra (VZ, USA). All of a sudden my android auto stopped working. Wireless completely. Before AA wireless would connect to my car within a few seconds of my head unit booting up. Now it just waits at "Connecting". It knows my phone is available, but doesn't seem to want to connect.
If I plug in the phone, it works for all of ~20 seconds before disconnecting. If I just simply reconnect the cable it works again, 20-30-40 seconds before disconnecting.
Before the 13 OTA, it was working perfect, no disconnects on wired or wireless. So I 100% know it's not the cable or my headunit. Literally last night it was working, now it's not.
I checked sleeping apps on the phone and AA or Maps is set to never sleep/not optimized. Not sure what else might have changed.
I've uninstalled/reinstalled/cleared cache etc of AA on my phone. still nothing.
I fully reset my headunit to factory settings, I've done the network reset on my phone multiple times. I'd -really- like to avoid having to fully wipe my phone and try from there...
Has anyone run into this on their newly updated S22? Tips?Suggestions?
Thanks!
Me too. S22 ultra. Car is Mercedes A250 e. It's only a few days I have the car and I was able to connect only with usb cable in Android 12. I don't know if it is a limitation of the car not to be able to connect in wireless mode. Yesterday after OTA upgrade to android 13 I get the error unable to connect to android auto in the MBUX of the car.