I got a bluetooth dongle (http://dealextreme.com/details.dx/sku.11866) and I got it working and its working overall pretty well. But now all the sudden when I plug my phone in though USB it doesn't work anymore. It still charges but now it doesn't do anything when connected via USB. Activesync doesn't recognize it and doesn't do anything at all when I plug in my HTC Fuze through USB.
I like bluetooth but I like using my phone for tethering and not to mention bluetooth burns through battery.
So what could be going wrong?
I have no idea what could have messed it up because it just all the sudden stopped working. I have tried everything and yet nothing helps. I uninstalled and reinstalled a couple times and looked through all the drivers. Usually I hate posting threads like these asking for help but I really have nothing left to do anymore.
*posted previous thread in wrong section*
Related
Usb is not working on my polaris. When i connect it to my computer nothing happen. The computer wont eve recognize that i connected something. I have tried to hard reset it, but it didn't work. I have flashed it with c_shekar v3 rom. I also have radio rom v. 1.58.25.14. The usb port has worked great for some time now, but suddenly it just didn't work.
usb problem
I had the same problem and the solution was really bizare. I let the phone into the usb, charging and after a while i heard that usb pluging in sound and imediatly after that the usb pull out sound, then after some time it happend again, and again. The fourth time i think the connection was stable and activesync worked. I did nothing, weired , i know but this is when windows meets windows through another company. Oh, and see if the usb on the phone is clean.
I did try to clean the usb connection on the phone, but it didn't work. I have also tried 4 diffrent usb cables. I am trying to flash another rom from the sd card, but that isn't working either :S The phone have been connected to the computer for several days now, but nothing happens. Maybe the moisture in my skipants killed it? (I spend at least 4 days a week on my snowboard) Maybe I'll just use it for skiing and dh, and buy a diamond for normal use.
Recently my TC2 has stopped charging from the USB connected to the computer. It is recognised and still syncs. When I do it from a plug direct, or from car charger, it charges?
I am using MS Vista, so could it be a "fix" that has been automatically downloaded or is it a problem with the device? I have checked the cable, replaced it, and moved it to a differnet USB port but to no avail. I have also checked the ports in device manager and they all appearto be running correctly.
Anyone have any thoughts?
Thanks
In your power settings have you got "when device is turned on do not charge battery when connected to pc" make sure it's not checked.
Doh! How simple I don't know how I missed that.
Thanks very much for that meknb.
My G-tab suddenly became undetectable by my PCs when I connected via USB. Not wanting to bother the devs or anyone else unless I really needed to, I spent about 24 solid hours trying to find and fix the problem. I'll spare you the gory details of all the different things I tried. It wasn't pretty, and completely futile. Then it finally occurred to me to try another cable. D'oh. Problem solved. The cable that came with the G-tab apparently bricked, two weeks after I got it. So all's well that ends well.
Your post made me sad..
Because I'm having trouble getting my PC to connect to my tablet, and I thought you'd found a solution I could use.
I'm using the Vegan-Ginger. It used to work, and then yesterday, instead of seeing the PC connection in my notification bar, I had an icon that said USB debugging. I found I could turn off debugging, but that still doesn't fix the problem of my PC not connecting to my tablet. With debugging turned off I don't get any icon in my notification bar when connected to the PC.
I've been searching the forums, but haven't found the solution yet.
Update: I found I could connect to a PC by mounting the drive in Clockwork Recovery mode. Still if anyone has a suggestion on how to mount the tablet without using Clockwork, I'd love to hear it.
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
paniqueado said:
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
Click to expand...
Click to collapse
I believe i read that there is a specific app that you have to run on these to do the mirror link...easy connect, maybe? Did your HU come with an instruction booklet? I was looking through mine earlier and it went over in detail how to setup mirroring through that app.
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
paniqueado said:
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
Click to expand...
Click to collapse
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
JordanB said:
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
Click to expand...
Click to collapse
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
I seem to have USB connection working now with only one "allow USB Debugging?" popup, only when I first connect.
What I did was turn wifi off on the headunit. I am not sure why it worked, but I just wanted to turn everything not needed off, and see if the headunit would stop disconnecting all the time. So far so good. I can probably live with one annoying popup, instead of one every few minutes.
Of course you have to keep the screen on the phone on, and the battery in the phone will deplete faster than the headunit charges it, but still an improvement. I had a 30 minute drive today, and the USB never disconnected!
paniqueado said:
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
Click to expand...
Click to collapse
paniqueado, try the da_anton ROM. I just installed it and easyconnect finally works as it should. I just plug in my phone to the USB and it fires right up! One prompt if any on the head unit, and NO disconnects whatsoever.
Hi all,
Suddenly my pc stopped recognizing my s8+, tried several pcs, macs, even my car doesn't recognize it. When I plug the USB Cable(OEM) nothing happened, the phone just charges, and I try to change the USB configuration but nothing happens, not even adb recognize it anymore. One morning it start working again, but next time I tried again, it stop working again.
What can I do?
is debugging enabled? (just starting with simple stuff first)
U have a bad port mine was like that it would work sometimes for 5 min and then unrecognized it shorted out or something
First try to change the cable. this will be the cheapest solution.
Yes it is, sorry I didn't specified it.
Already tried. Thank you.
What did you do? take it to warranty?