[DISCONTINUED][ROM][11][OP7T] crDroid+ v7.13 [UNOFFICIAL] - OnePlus 7T ROMs, Kernels, Recoveries, & Other Deve

crDroid+ v7.13 for OnePlus 7t "hotdogb"
Preamble
I always preferred Cyanogen/LineageOS based ROMs over dozens of AOSP forks floating around and managed by unknown individual hobbyist developers since Lineage has some foundation and core development behind it at least.
But just plain Lineage is too flat in terms of features I would like to have and unfortunately there are almost no forks I am aware of except great crDroid ROM.
crDroid itself has almost everything I need but some little nifty features which make daily life even better.
So that's my daily driver ROM I decided to share with the community, crDroid packed with additional features.
Let's call it crDroid+
Features
===== 30 September, 2021
- WiFi & Bluetooth timeout settings
- Dialer revamed to look like OOS
====== 06.09.21 build:
* Alarm & Wakelock Blockers
* Extended Navigation Gestures
* Classical AppOps backported to Android R
* Colored status bar icons
* Double Tap to trigger doze screen
* ForceDark blacklist (exclude specific apps from being "forcibly darken" if you have this setting enabled)
* Vibration patterns from OOS
* Recents: add kill action button to app shortcuts popup
* Fluid v2 & ShapeShift Android 12 locksreen clocks
* OOS icons & sounds
* Correct device model number detection (by default it's hardcoded to HD1905)
* ..and several minor fixes
Installation
It's the same as for original crDroid (perhaps LineageOS guide will work too)
The ROM has no gapps bundled so you have to install gapps of your choice (im using NikGapps) or microG (original crDroid has signature spoofing so it should work as well)
Downloads
Sourceforge
Sources
ROM: https://github.com/crdroidandroid
Kernel: kernel Source
Issues
Perhaps the same as for original crDroid but I'm not aware of any atm
Kudos
crDroid & LineageOS maintainers, The Community, contributors & patches authors

reserved

Thanks Bro.

I'm on HD1905 (originally global rom but now on Lineage)
Is the mic working on this rom for calls? It doesn't work for me on Lineage.

xdabushrang3r said:
I'm on HD1905 (originally global rom but now on Lineage)
Is the mic working on this rom for calls? It doesn't work for me on Lineage.
Click to expand...
Click to collapse
I'm on HD1903 and mic is OK. Can't say anything about 1905 but there's a chance it does not since crDroid itself is Lineage based ROM. Device tree used for building is a bit different though.

faust93 said:
I'm on HD1903 and mic is OK. Can't say anything about 1905 but there's a chance it does not since crDroid itself is Lineage based ROM. Device tree used for building is a bit different though.
Click to expand...
Click to collapse
Thanks mate.
I'll try it out

faust93 said:
crDroid+ v7.9 for OnePlus 7t "hotdogb"
Click to expand...
Click to collapse
Hi Bro,
First of all thank you for sharing such amazing work with US. Further just observed appended issues,
1- Finger Print did not working properly (Tested with all color overlays)
2- Dual Sim did not working on T mobile and maybe you need to add the DSDS fix to get it working
3- Further will report if observed
Except above ROM is working fine and Micro G as well.
Just signed in After years on XDA just because of this reply
Stay Safe & Blessed
Edit: @faust93 just test an build crdroid build having dual Sim fix for t mobile variant finger print also working, so please rebuild if you have time.
Thanks to @mukesh22584 for his great help and support in adding dual Sim fix in official crdroid for us.

Downloaded the dec release, tried to installed, got an interesting error from recovery.
"Package is for product Oneplus7t but expected hotdogb."
Isn't the oneplus 7t's codename hotdogb?
Update:
Installed the latest Lineage recovery, rather than the one in the directions, and was able to get the rom to install.

Is there a way to reduce the minimum volume during calls with this rom? I have my volume set to the lowest level, but I can't hold my phone against my head because the speaker is too loud.
I have tried enabling/disabling the speakerphone and adjusting the volume slider with no change on the minimum volume output of a regular call.

faust93 said:
crDroid+ v7.11 for OnePlus 7t "hotdogb"
So that's my daily driver ROM I decided to share with the community, crDroid packed with additional features.
Let's call it crDroid+
Features
===== 30 September, 2021
- WiFi & Bluetooth timeout settings
- Dialer revamed to look like OOS
====== 06.09.21 build:
* Alarm & Wakelock Blockers
* Extended Navigation Gestures
* Classical AppOps backported to Android R
* Colored status bar icons
* Double Tap to trigger doze screen
* ForceDark blacklist (exclude specific apps from being "forcibly darken" if you have this setting enabled)
* Vibration patterns from OOS
* Recents: add kill action button to app shortcuts popup
* Fluid v2 & ShapeShift Android 12 locksreen clocks
* OOS icons & sounds
* Correct device model number detection (by default it's hardcoded to HD1905)
* ..and several minor fixes
Click to expand...
Click to collapse
thanks for updating. you just change features and dont add gapps yes? so its basicly the same like official?

wizardknight said:
Is there a way to reduce the minimum volume during calls with this rom? I have my volume set to the lowest level, but I can't hold my phone against my head because the speaker is too loud.
I have tried enabling/disabling the speakerphone and adjusting the volume slider with no change on the minimum volume output of a regular call.
Click to expand...
Click to collapse
Hmm, that's weird. Have no such problem. Do you have any audio mods installed like viper etc? Also check default audiofx/moto audio settings, may be they affect somehow..

pxrave said:
thanks for updating. you just change features and dont add gapps yes? so its basicly the same like official?
Click to expand...
Click to collapse
Exactly, same code base/device trees + additional features and no gapps.

faust93 said:
Hmm, that's weird. Have no such problem. Do you have any audio mods installed like viper etc? Also check default audiofx/moto audio settings, may be they affect somehow..
Click to expand...
Click to collapse
Nope. Clean install. Nothing installed at all other than gapps and root, and call volume set to the lowest level is easily what I would expect at mid to high levels on any device. I want to turn down the volume, but can't as I am already at the lowest setting.
My mother called me this afternoon and I had to hold the phone 5" away from my head during the entire call because of how loud it was.
I've been trying to find a way to edit the /vendor/ect/mixer_paths files in hopes I can reduce the call gain, but every time I make a change the file size drops to 0. After that the system will no longer reboot, and I have to do a clean install.

wizardknight said:
Nope. Clean install. Nothing installed at all other than gapps and root, and call volume set to the lowest level is easily what I would expect at mid to high levels on any device. I want to turn down the volume, but can't as I am already at the lowest setting.
My mother called me this afternoon and I had to hold the phone 5" away from my head during the entire call because of how loud it was.
I've been trying to find a way to edit the /vendor/ect/mixer_paths files in hopes I can reduce the call gain, but every time I make a change the file size drops to 0. After that the system will no longer reboot, and I have to do a clean install.
Click to expand...
Click to collapse
So you mean in-call volume does not work at all or the lowest is too loud still? Check "crDroid Settings->Sound->Volume steps" and try to adjust Voice Call item.

faust93 said:
So you mean in-call volume does not work at all or the lowest is too loud still? Check "crDroid Settings->Sound->Volume steps" and try to adjust Voice Call item.
Click to expand...
Click to collapse
The incall volume, at the lowest level, is like having the speakerphone turned on. I can set the phone down and clearly hear what is being said. At the lowest level is is too way loud.
I have already been able to increase the number of volume steps, unfortunately it doesn't reduce the volume level of the lowest step. Or if it is reducing the volume level is is by a trivial amount.

@faust93
Any chance you could build an update that includes this patch for the brightness? It looks like it would really smooth out the brightness ramp curve.
https://review.lineageos.org/c/LineageOS/android_device_xiaomi_beryllium/+/320942/

wizardknight said:
@faust93
Any chance you could build an update that includes this patch for the brightness? It looks like it would really smooth out the brightness ramp curve.
https://review.lineageos.org/c/LineageOS/android_device_xiaomi_beryllium/+/320942/
Click to expand...
Click to collapse
Hi. Though it's for different device I have applied the patch in 220109 build. But it did not make things much better IMHO...

faust93 said:
Hi. Though it's for different device I have applied the patch in 220109 build. But it did not make things much better IMHO...
Click to expand...
Click to collapse
That's too bad. Thanks for giving it a shot.
Anything else interesting in the new build?

Is there some changelog for latest builds?

pxrave said:
Is there some changelog for latest builds?
Click to expand...
Click to collapse
EDIT: WRONG DEVICE
crDroid 8.0 - OFFICIAL | Android 12.
Updated: 11/01/'22
Source Changelog:
• Initial stable version
Device Changelog:
• Initial VNDK 31 Stable build
Notes:
• Clean flash must from crDroid A11.
• Report only device related issues as rom
source code is still beta.
• Non Dynamic Build
• Recommended BitGapps
crDroid.net - Download crDroid v8 for Redmi Note 8 Pro (begonia)
official crDroid v8 for Redmi Note 8 Pro (begonia)
crdroid.net
LINK FOR CORRECT DEVICE:
crDroid.net - Download crDroid v7 for OnePlus 7T (hotdogb)
official crDroid v7 for OnePlus 7T (hotdogb)
crdroid.net

Related

[ROM][4.2.2]Vanilla rootbox

This Vanilla Root Box built from source for our VilleC2​
anders3408 said:
Vanilla RootBox is built straight from RootBox sources and always carries a very light installation with no extra/useless apps. This means, you can enjoy a pure Android experience combined with AOKP/CM features and some CM cherry-picks. Keep in mind Jelly Bean is only at the beginning stage of development and there will be minor bugs. Every RootBox releases are stable and always up to the challenge for a daily usage. I personally have a high standard when it comes to releases and this is why this project always meets the expectations of users. If you're wondering how this ROM differs from any other AOKP roms out there, I only have one thing to say: Try it yourself and choose the one that meets your requirements.​
Click to expand...
Click to collapse
Credits:
rootbox Team
@dominos_liberty
@u-ra
@anders3408​
Don't forget to press thanks button, if you liked my work
Click to expand...
Click to collapse
""
Download Links:
Rom
Kernel
Click to expand...
Click to collapse
Screen Shots:
Features list:
AOKP Features
CM Profiles
Per App DPI
Per App Tablet UI
Per App Language
OTA Updates - Goo Manager
Navigation Bar Colour
Camera: Save to external memory
Phone: Advance Phone Settings (Vibrate on Answer, Every 45 Seconds, On Hangup and On Call Waiting)
Phone: Noise Suppression
MMS: Message rate alerts (Modify SMS message limit for alert)
MMS: Fully Customizable MMS Theme
MMS: Soft Keyboard Type (Emoji, Enter to Send, Enter for a New Line)
Home button call answer (Accessibility Option)
Variable size pattern lockscreen
RootBox Settings
Pie (Paranoid Android)
LCD Density Changer
Low Battery Warning (Pop-up & Sound, Pop-up only, Sound only, Off)
Option to control cursor in text fields using volume keys
Disable Fullscreen Keyboard (Landscape mode)
Expanded Desktop
Hold Back to Kill
CRT Animation (Screen On/Screen Off)
Lockscreen Shortcuts (Paranoid)
Lockscreen Targets (CM)
Screen Security Features (Unlock options: Quick Unlock, Delay Screen Lock, Menu Unlock, Home Unlock)
cLock (Chronus)
Option to disable sound when adjusting volume
Launch Music app on Headset connection
Hardware Keys Remapping
Lockscreen Hardware Keys Remapping​

			
				
download links coming soon
downloading right now
will report soon
hab been waiting for this!
note: after flashing rom, kernel do flash the kernel zip as well or else wifi will not work...
dominos_liberty said:
note: after flashing rom, kernel do flash the kernel zip as well or else wifi will not work...
Click to expand...
Click to collapse
thanks for the heads up!
Been waiting for this !! Awesome Dominos !!
Thnx @vksjangra and @Seraz007
when will be the day to take out rom for those who are stuck with ics???? when???? jb rom pure draw knowing that there are people trapped with ics
kayserxx said:
when will be the day to take out rom for those who are stuck with ics???? when???? jb rom pure draw knowing that there are people trapped with ics
Click to expand...
Click to collapse
For this you will need to contact HTC or change your CID to get updates ...
first of all i would like to thank you for your hard work
I just flashed this rom and so far I found the usual cm bugs
-storage force closes
-echo during phone calls
Awesome job again mate looks kinda similar to PAC Man ROM which is my current driver good job.
Off topic but is it possible to port trick droid 10 with sense 5 from the standard one s? Would love sense 5.
Sent from my HTC ONE S using XDA Premium HD app
its 50 50, because processor is different.... so may work or may not...
Benchies?
Quadrant?
quick review after a normal usage in a day
battery back up - enough to get u through the day
smoothness - really good
camera is working same as that of CM10.1
no problem in camcoder as well
booted with first flash
Bugs i found so far
1. i cant seem to able to get phablet and tablet ui working in hybrid settings
2. voice call echo
3. storage force close in settings
As i am new to hybrid and rom control settings so still testings them
Cheers for ur hard work mate
Improve the camera please please pleaassseee!
Merrymustu said:
Improve the camera please please pleaassseee!
Click to expand...
Click to collapse
i think he is already onto it!
Read dominos post on CM 10.1 thread
He is trying to get CM working on latest kernel 3.4
which will fix a lot major and minor bugs ( i think )

[ROM][I9001][UNOFFICIAL][5.0.2] CrDroid Lollipop [EOL]

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
All the source code for crDroid is available in the Github repo. And if you would like to contribute feel free to pull a request.
Rom features
Nav bar tweaks (on/off toggle and custom dimensions);
Battery text mode (from cm);
Battery icon options (from cm);
Media scanner behavior on boot;
HSPA + icons on status bar;
SlimRoms heads up customization;
Traffic metter on status bar;
Gesture lockscreen;
Gesture anywhere (launch apps and activities from custom gestures);
Weather display on expanded status bar;
Wakelock blocker;
Left handed navbar option;
XuiMod toast animations;
AOKP custom system animations;
App circle sidebar;
CPU info overlay option in development settings;
[Connect/disconnect notification support;
Long click support on quick settings;
Screen recorder;
Animated rotation tile;
Wake up on plug;
Development shortcut;
Performance settings from CyanogenMod;
Clock and time clickable in expanded status bar;
Notification ticker;
Quick unlock;
PIN keypad shuffler;
Custom lockscreen shortcuts;
Answer calls with hardware home button;
Status bar clock tweaks (right, center or hide clock with many dates formats to show. Custom colors included);
Notifications counter;
Volume keys wake the device;
Ability to hide the alarm clock icon from status bar;
Dialer Lookup;
Profiles form CyanogenMod (new merges and lollipop style);
Protected apps (using trebuchet launcher);
Filter spam notifications;
CyanogenMod SuperUser;
Clear all button in recent panel with custom option (hide, top right or top left);
Disable search bar in recents;
Privacy guard from CyanogenMod with new Superuser access through it!!!;
Ability to hide superuser status bar icon;
Quick settings pull down with one finger (right, left or off);
Smart pull down;
Configurable 0, 90, 180 and 270 degree rotation;
Toggle to not allow quick settings on secure lockscreen;
Brightness control through status bar;
Double tap status bar sleep;
Data activity indicators;
Call blacklist support;
Increasing ring tone;
In call vibrations;
Ambient display (DOZE features);
Advanced reboot menu;
Option to hide adb notification;
Screen shot quick delete with confirmation;
Long press back to kill with configurable timeout;
Volume button custom actions (skeep track, wake screen, adjust sound and keyboard cursor control and swap volume buttons);
Less frequent notifications sound;
Advanced keyboard features (auto rotation with timeout, disable full screen, selector notification, show enter key, volume key cursor control);
New Eleven music player and AudioFX from CyanogenMod;
Among others. For more infor visit our github
Screenshots
http://crdroid.org/?page_id=472
crDroid official website
http://crdroid.org/
Download
Rom:
crdroid-5.0.2-20150331-ariesve
Google Apps:
https://s.basketbuild.com/gapps
How to install :
Use TWRP. with new partition
Warning: Only use this recovery to flash New build with new partitio layout.0. Otherwise, you risk bricking your phone, or you might experience boot and stability issues!
Wipe data and cache.
Format /system (only first time coning from older recovery)
Format /data and /data/media (only first time coning from older recovery)
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade the since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
Builds and full support:
https://plus.google.com/communities...aa3e7d81-bf88-4973-9638-d5b0cd003b2d?hl=pt_br
Don't expect any support if you:
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Source on Unofficial github
» Device
» Vendor
» Kernel
» audio-caf | display-caf | media-caf
XDA:DevDB Information
CrDroid Lollipop, ROM for the Samsung GT-I9000 Galaxy S
Contributors
K_TECH, DevConnection_Team, Christopher83
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-01-20
Last Updated 2015-04-02
Unofficial Changelogs
UNOFFICIAL CHANGELOGS​
Code:
[B][SIZE="4"]2015/03/31[/SIZE][/B]
-Sync with device tree (Device, Vendor, Kernel)
-Sync with source
[B][SIZE="3"]Old Build[/SIZE][/B]
[HIDE]
[B][SIZE="4"]2015/02/12[/SIZE][/B]
-Sync with device tree (Device, Vendor, Kernel)
-425MB of RAM *Christopher83
[B][SIZE="4"]2015/01/19[/SIZE][/B]
-Initial release for ariesve
-Using K^kernel source as stock kernel (416 of ram) by Christopher83
-Remove CellBroadcast from build
[/HIDE]
ANNOYANCES​
Code:
[B][SIZE="4"]2015/03/31[/SIZE][/B]
-Tell me please :p
Many thanks to @ahmed dzico for testing it
Hope you guys enjoy this one ^_^
Thanks bro for your hard work :thumbup:
Nice to see some more Lollipop ROMs for our device, beside CM12. Good work !
Maybe you could work together with @davidteri91 , he was also planning to do a CrDroid build for our device I think.
MajorD. said:
Nice to see some more Lollipop ROMs for our device, beside CM12. Good work !
Maybe you could work together with @davidteri91 , he was also planning to do a CrDroid build for our device I think.
Click to expand...
Click to collapse
Yeah i know it, If david release his official CrDroid for this device, i'll stop this project.. about collaboration with him. i think i can't, dont have skill enough to manage it all, and i like to use Unofficial release. Why? Because i can add/remove that i dont like it in Official release such as CellBroadcast.apk, OTA updater, etc
Is it difficult to build on your own?
I'm new in this and would like to give it a try.
Besides thanks for the unofficial build.
K_TECH said:
[*] Use CWM6.
Click to expand...
Click to collapse
I suppose it contains an error. Please correct if I'm right, because someone could really use a recovery-clockwork-6.0.5.1-ancora.
ze7zez said:
I suppose it contains an error. Please correct if I'm right, because someone could really use a recovery-clockwork-6.0.5.1-ancora.
Click to expand...
Click to collapse
Thanks
OP edited, sorry about that
Well, davidteri91 will give us Official support for our device. If it exits i'll discontinue this project
davidteri91 said:
Hi people today I start with the work for sammys msm7x30 soon I will contact with you
Click to expand...
Click to collapse
Thanks in advance
What's all that fuss about android 5.0, I tried few recently, but they all feel oversimplified, with less functionality, although the CrDroid Lolipop feels smooth (antutu benchmark scored over 13.000), but anyways I miss some of the nice features and cool looks that some of the latest kitkat roms had. To name a few, you cannot take pictures with camera by pressing power button, changing the looks of the clock in the lockscreen doesn't seem to work, also could'nt find where I could add the shortcuts on the lockscreen. However I am very glad to see new roms for my beloved sgs +, thank you.
nezhinaw said:
What's all that fuss about android 5.0, I tried few recently, but they all feel oversimplified, with less functionality, although the CrDroid Lolipop feels smooth (antutu benchmark scored over 13.000), but anyways I miss some of the nice features and cool looks that some of the latest kitkat roms had. To name a few, you cannot take pictures with camera by pressing power button, changing the looks of the clock in the lockscreen doesn't seem to work, also could'nt find where I could add the shortcuts on the lockscreen. However I am very glad to see new roms for my beloved sgs +, thank you.
Click to expand...
Click to collapse
CM is working to merge the features from KK but it needs time and patience....
A few days ago they merged the Theme Chooser engine which in my opinion is a very big step.
At the moment the priorities are to have first a stable build suitable for daily use, after that we would also talk about new features.
Alright, sounds promising, thank you, keep it up
Good work, the rom feels smooth and fast :good:
Problem in "Language & Input"
There's a problem in "Language & Input" , the "Android Keyboard" not working
hi
is there theme features in this rom
Update!!
UPDATE
Download link First Post
Changelog Second Post
Enjoy it guys!!! ^_^
Hello,
If you're updating a CM 12.0 released after 21/12/2014
Reboot inside recovery (always the new one)
Install the rom update
Reboot the system
Click to expand...
Click to collapse
Updating from previous crDroid version by this method will work?
I used only dalvik and cache wipe in addition to method above and it looks working to some extent.
Hey, I'm really happy that you made ROM for this phone, but i need your help with installation. I've downloaded your ROM and GAPPS, i made a backup of last ROM (just 2.3.6 stock) and I formatted Data, Cache, Dalvik, System and Internal. I tried to install your ROM with(out too) wiping data/dalvik after installation and I'm getting the same error all the time. When I'm booting, I'm getting information that my data is corrupted and I have to make a factory reset by button on screen. I doesn't make any changes, next boots are the same.
Of course I'm using TWRP which you mentioned in your post.
EDIT: I was installing latest verion.
Does this rom work for the i9000?

LineageMOD [9.0/Pie][19April20]

Code:
/* * I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). * Please do some research if you have any concerns about features included in the products you find here before flashing it! * YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. * Your warranty will be void if you tamper with any part of your device / software. * Same statement for XDA. */ ​
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's Different from lineageOS 16? or Why lineageOS 16 MOD? :
Very few minor changes which i usually miss in lineage-OS. So i decided to include those features and make my own lineage-OS build. I am just a noob when it comes to this stuff, so it won;t be turning into a ROM with lots of features. I will add some minor changes and also include some changes which are being reviewed but not yet merged. Sort of like sneak peak or aplha lineage OS 16 build.
As of now whats different from lineage-OS 16 and also what i am working on.
Customization of QS tiles (Omni Style)
Ability to set ringtone of both sims.
Show icon of package associated with Toast
turn on development settings by default
Added cycle mode for QS location tile
Included MIUI cam
ScreenShot sound Settings
New voLTE icon, oxygenOS style
Dark theme notifications fixed.
auto call recording
Font manager
Pixel Style lockscreen weather
Q style battery icon
gaming mode and sound tile
LockScreen Charging info and toggle
Screenshot sound toggle
What's working :
Boots
Volte
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
voice over wifi works for airtel(airtel india)
Known issues:
2 QS tile in landscape Mode are outside notification drawer if you set columns too high. (trying to fix it)
CREDITS @GuaiYiHU (this build would have not been possible without his work)
jhenrique09 (again lot of stuff for whyred)
Nidhun Balaji (for dirac support in los)
Bladeyy (for helping me with some silly mistakes and more)
Adams for wasting his limited data on my test builds.
Lineage Team Ofcourse
just remind me if i missed someone
Source Code:
https://github.com/lineagemod/android
ROM OS Version: 9.x Pie
Based On: Lineage OS
Version Information
Status: Stable
Created 2019-01-05
Last Updated 2019-06-13
Download ​ http://bit.ly/los16mod-whyred-afh
http://bit.ly/los16mod-whyred-sf
TEST Build (everything works, just test builds for new features)
https://sourceforge.net/projects/kapiljhajhria/files/test/
Will cause device to force Encrypt(not sure but just to be safe)
Make Sure to flash FDE disabler Zip if you want your device to stay decrypted.
Change-logs
19/04/20
April Security Patch
Q wifi icon
Note:
Download from AFH, not able to upload to SF
29-03-20
Downlaod from Gdrive(not able to uplaod to SF or AFH for now)
March Security patch
Note
I started from scratch. complete rebase. So you need to do clean flash.
so far features that i have added back
1. qs tile customization
2. screenshot sound toggle
3. los network meter bug fix
4. add gamin mode tile
5. OOS style switches
6. MIUI camera
7. auto call recording
8. dPhone ringtone setting for Multi SIM device
9. Add deep sleep info to uptime
will try to add other features along the way.
15-02-2020
download from HERE
feb security patch
22-08-2019
Device CL
- Vendor blobs updates from MIUI
- GCam fixes
- Perf blobs fixes
- Audio configs cleanup
- GCam patch included
- I made a patch to ignore RSSNR signal level
and more
-same as srfarias's build as its based on his trees.
»Upstreamed Los
[Los feature]Now the devices connected to your whyred hotspot can make use of its VPN. This means if you are using adblocker like adguard then all the device connected to your hotspot will have adguard protection as well.
?
My internet is down from last 24hr, so it will take me time to upload the rom to SF.
11-08-2019
Clean Flash reuqired
Device CL
- Vendor blobs updates from MIUI 9.8.8
- In call volume fixes
- Other audio issues fixes
- Set fifo ui prop for EAS
- Dexpreopt all except prebuilts
- Build fingerprint from miui stable to fix cts
-and lot more, same as srfarias's build as its based on his trees.
ROM CL
»Aug SP
»Los Upstreamed
»VoLTE icon toggle
»Auto Face Unlock toggle
»Lockscreen Charging info and toggle
»Battery icons option FC fixed
I rebased the rom recently to fix battery icon options FC. will add back microg support in next build.
Features so far
»QS customization
»Turn on development settings by default
»Screenshot sound toggle
»Phone ringtone setting for Multi SIM device
»Add support for theming notifications
»Implement weather on lockscreen like Pixels
»Sound tile
»Gaming Mode tile
»Auto face unlock toggle
»VoLTE icon and its toggle
»Font engine service, around 40 custom fonts option to choose from
14-07-2019
»july security patch»los upstreamed
»Q style battery option and voLTE icon has been removed for now, it will be added later. portrait and text option are the only available options under battery icon styles for now.
Note:
i am busy this month so no features this month. will add more features next month. OTA still not working as i don't have enough time right now. will fix it next month.
11-05-2019 (Pie Firmware only)
-May Security Patch
-blobs Update to MIUI 9.4.25
-Los Upstreamed
17-04-2019 (Pie Firmware needed)
»Supports Pie firmware Now only pie firmware
» MAC randomization (under Developer options)
»GuaiYiHu's Kernel Upstreamed (pubg HD mode and Kcal added)
»Los Upstreamed.
» Not Pushing OTA for this build as it needs Clean flash.
11-04-2019
-working OTA
-can check Changelogs from Updater app as well
-April Security patch
-Los Upstreamed
24-02-19
Changelogs:
- network meter fixed (los upstreamed)
- guaiyihu's kernel upstreamed.
- Update SDM blobs from LA.UM.7.4.r1-04100-8x98.0
- Pin critical apps and system services that get swapped, pin launcher as welll.
- also in previous build users were not able to flash some custom kernels. thats fixed as well.
- can choose hd mode in pubg now?
- and some other small changes/fixes as well.
06-02-19
[/HIDE]
- Added Dirac support
-f2fs support added (only ROM, not kernel)
-feb seucrity patch
-sound tile added
-fixed whatsapp video recording not working
- Update build fingerprint to MIUI V10.2.2.0.OEICNXM
- Update vendor security patch level
-Add support for forcing 18:9 full screen aspect ratio
-Fixed night light, reading mode
-Fixed sms notification sound (need confirmation from more users)
-Fixed wifi and hotspot issue faced by some user on previous build.(again, need more confirmations)
»dirac support temporary, might be removed in next build. depends on user feedback
»if u don't notice any difference try stopping music and resuming it again.
»SF mirror takes time, will be up soon on SF as well.
» thanks to Nidhun Balaji, GuaiYiHu and jhenrique09 for this build.
[/HIDE]
13-01-19
-Selinux Enforcing
-Added voLTE icon
-Added option to disable Screenshot sound
-Added Auto Call recording option in dialer.
-removed Lineage Camera2, wasn't working anyway.
-Smart Lock enabled by default. Makes it easier to find face unlock now.
-Also now face unlock takes you directy to homescreen, before it used to just unlock device but still stayed on lockscreen.
-Gcam Removed temporarily, will be back soon.
- As usual upstream, upstream, upstream
09-01-2019
-Jan security patch
-Fix no default ringtone for slot2
- added gaming mode tile
-Implement aggressve DeviceIdle
05-01-2019
-Update some blobs from MIUI V10.2.1.0.OEICNFK
-Privacy Guard is now working
-Supports Encrypted Device now. You don't need decrypted Device.
-Singature Spoofing for MicroG (Let me know in the group if MicroG is working for you. As i haven't tested it. But signature Spoofing Works)
-Upstreamed Sources
​
FAQ and More
​Q: Does it Support Dual LTE?
A: Yes
Q: Does it have data switch bug?
A: No it doesn't. If you are using dual sim then you can easily switch data sim and if you use Sim2 for data then it won't reset to Sim 1 on reboot.
Q: Can i use google pay and other such apps?
A: Yes, make sure to use magisk hide and hide root from google Service framework, com.google.android.gms.setup and google pay. You don't have to deny phone permission of google play services in this rom. if some other app detect root then you can try to hide phone permission as well. But for google pay you don't have to do it. Just magisk hide is enough.
You can also go to magisk manager settings and tap on hide magisk manager. After this is done just toggle magisk hide off and one once. Also force stop the app and launch it again. Reboot.
Even after everything, if some app is detecting root then you are out of luck. .
Q: My device is encrypted. Can i flash this ROM without wiping my device?
A: Yes you can. as of 05/01/19 this ROM supports Encrypted device.
Q: How to prevent Force encryption?
A: If your device is decrypted and you want to stay decrypted then check out this XDA Thread .
But if your device is encrypted and you want to decrypt your device then you will have to wipe your device and loose all data.
Q: Which gapps do you recommend?
A: Pico or nano
Q: Does it Support MicroG?
A: It should, i have added Signature Spoofing in 05/01/19 build. Give it a try and let me know. Also as far as i know, microG is still in sort of beta phase for Android Pie. Isn't it? So make sure to check this first and only then Report any issue with microG. First check if its MicroG issue on pie or if its not then let me know the issue.
Q: Can you add xyz feature?
A: I am not a developer, i can compile roms and fix some conflicts. You are free to request features but that doesn't mean i will add them. I might consider them and try to add them. But i might not be successful .Because as i have told you already. I am not a pro.
Q: No Progress bar when i download apps from playstore.
A: Go to Settings-Apps and from top right corner. Tap on 3 dot and enable show system app. Now look for android Setup and disable this app. Reboot.
​[COLOR=inherit !important]
#s3gt_translate_tooltip_mini { display: none !important; }[/COLOR]
Just in case
Download link of 05 01 2019 doesn't exist
Edit now exist
venezolano69 said:
Download link of 05 01 2019 doesn't exist
Edit now exist
Click to expand...
Click to collapse
it does now. was uploading the build. Its done now. also added change logs
Forgot to add signature spoofing in CL, adding it now
Wew...congrats.
Great work! Can I choose the performance profile in setting s-battery- battery saver and performance? Like the pic shows, thanks you very much.
Hi nice ROM bro, how you doing? Some bugs name you saying did you updated them?
cwr250 said:
Great work! Can I choose the performance profile in setting s-battery- battery saver and performance? Like the pic shows, thanks you very much.
Click to expand...
Click to collapse
Yes you can
Sent from my Redmi Note 5 Pro using Tapatalk
Azharlala said:
Hi nice ROM bro, how you doing? Some bugs name you saying did you updated them?
Click to expand...
Click to collapse
OP is updated with everything. Bugs that i am aware of and working on. If you find more then report and i will add it to the list
Sent from my Redmi Note 5 Pro using Tapatalk
Hi, can you customize the main screen so that you can add your iconopacks like in LineageOS 15.1?
is carrier video call working vilte
Dgonix said:
Hi, can you customize the main screen so that you can add your iconopacks like in LineageOS 15.1?
Click to expand...
Click to collapse
Its a launcher feature. Los15 didn't had quickstep. Los16 uses quickstep. You can use any third-party launcher. I will try to add los15 launcher as well in next build.
kcala said:
is carrier video call working vilte
Click to expand...
Click to collapse
Haven't tested it as i don't use it. Is it working in other Pie roms? Is yes then it should work here as well. I will try to test it..
How's the battery on this ROM? How much SOT can I get?
Kapiljhajhria said:
Haven't tested it as i don't use it. Is it working in other Pie roms? Is yes then it should work here as well. I will try to test it..
Click to expand...
Click to collapse
No, All pie rom i used till now self video shows but call disconnect the moment call connects
kcala said:
No, All pie rom i used till now self video shows but call disconnect the moment call connects
Click to expand...
Click to collapse
Will test as soon as i can. I never use it so can't really test it.
Sent from my Redmi Note 5 Pro using Tapatalk
Kapiljhajhria said:
Will test as soon as i can. I never use it so can't really test it.
Sent from my Redmi Note 5 Pro using Tapatalk
Click to expand...
Click to collapse
Thanks
Added game mode tile[emoji7]
For next update.
Sent from my Redmi Note 5 Pro using Tapatalk

[ROM][9.0][OFFICIAL][LA.UM.7.3.r1] Reloaded-CAF [31-05-2019]

Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
About Project
Reloaded-CAF is a Custom ROM which is based on CAF. The main aim of this ROM is to bring stock AOSP experience as much as possible while maintaining performance, smoothness and good battery backup. I hope that you'll all love this project, and help us, shape it even better. Meanwhile, all of our sources are publicly available on our Github. Hope you enjoy your stay and like our work on Reloaded-CAF. We did add some features to improve the overall experience.
What's CAF?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN, and Linux-MSM. Code Aurora is basically AOSP + Qualcomm specific enhancements and optimization.
Features:
* Buttons
Enable/disable navbar
Invert navbar keys
Volume key wake
Volume key music control
* Status bar
Battery style options
Clock customizations
4G/LTE toggle
VoLTE icon toggle
Quick pulldown
Network Traffic Indicator
QS row/column settings
* Lights
Battery lights/Notification lights toggle
LED pulse when battery low toggle
* Display
System-wide dark mode
Accents color options
Proximity check on wake
Double tap to sleep on statusbar and lockscreen
* Sound and vibration
In-call vibration options
Ringtone chooser for 2nd sim card
Fingerprint authentication vibration
Screenshot sound toggle
Toggle for silent notifications while screen on
* Security
Advanced Reboot menu
AppOps
* Lockscreen
Disable qs on secure lock screen
Pin quick unlock
Auto Face unlock
Charging info
* QS Tiles
Power
Sync
Heads up
Caffeine
Screenshot
* Gestures
3 Finger swipe for screenshot
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte.
Known issues:
You tell me
Instructions :
Download the latest build and GApps
Reboot to recovery and wipe system, data, cache, dalvik
Flash Pie vendor and Firmware, if you are on oreo vendor
Flash the latest build and Gapps
Flash magisk, if you want root access (optional)
Reboot
Downloads :
Reloaded-CAF: CLICK HERE
OpenGapps [arm64/9.0]: CLICK HERE
Telegram Groups:
Reloaded Telegram Group
Redmi Note 6 Pro Telegram Group
Redmi Note 6 Pro Telegram Channel
FAQ
Why is the security patch older than the latest AOSP patch?
CAF focus on delivering the latest hardware patches and are usually about a month behind Google on security patches, on the other hand, Google is usually a month or more behind on them on caf patches (sometimes months). No point in complaining about it, if you want the latest security patch, go with an AOSP based rom (like LineageOS), if you want latest Qualcomm optimizations for our hardware as well as fixes, go with caf, it's as simple as that.
Kernel Source: HERE
Device Source: HERE
And huge thanks to @fernandÃOdj for testing
XDA:DevDB Information
Reloaded-CAF, ROM for the Xiaomi Redmi Note 6 Pro
Contributors
@Pavanpatel @riteshsaxena @blackman01 @rama982
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Pie
Based On: CAF
Version Information
Status: Initial Release
Release Date: 2019-05-31
Created 2019-05-31
Last Updated 2019-09-31
Build Date 31-5-2019:
• Initial Build
Some Screenshots:
Perfect rom. You must try. Perfect, nice, good ROM perfect perfect perfect. I liked.
---------- Post added at 10:05 PM ---------- Previous post was at 10:05 PM ----------
please come on
Battery usage not wiping!!
Which camera is this rom using? Thanks!
Cioffaz said:
Which camera is this rom using? Thanks!
Click to expand...
Click to collapse
Looks a lot like Gcam, really simple camera with few options.
deathhall said:
Looks a lot like Gcam, really simple camera with few options.
Click to expand...
Click to collapse
I've read in many posts and telegram group that activating gcam is a bit tricky on tulip. Can anyone confirm that the camera (gcam) is working fine?
It also seems to me from the screens that there are two cameras...am i wrong about it?
Many thanks!
Cioffaz said:
I've read in many posts and telegram group that activating gcam is a bit tricky on tulip. Can anyone confirm that the camera (gcam) is working fine?
It also seems to me from the screens that there are two cameras...am i wrong about it?
Many thanks!
Click to expand...
Click to collapse
Besides chrome, these are the default apps that was with the latest ROM and gapps (nano). The camera is the first screenshot in the 2nd post, the one in the second to last screenshot wasn't included in the ROM. The apk just lists it as com.android.camera2
Really good rom, been using reloaded for 2 days now. And i think I'll use this as mu daily rom.
Anyway, i hope reloaded development for tulip will continued just like other rom
How abt the battery backup how many hours of sot can expect from this rom
galileogarin said:
Really good rom, been using reloaded for 2 days now. And i think I'll use this as mu daily rom.
Anyway, i hope reloaded development for tulip will continued just like other rom
Click to expand...
Click to collapse
It's getting continued till the time i own this device so don't worry we have a long journey to cover.
[email protected] said:
How abt the battery backup how many hours of sot can expect from this rom
Click to expand...
Click to collapse
It's totally upon your usage. So it's better try out yourself and let us know as well.
My new daily driver. Perfect rom, thank you!
Which Gcam is best suitable for this ROM? And what recovery should I use?
best rom i.ve tried
nullspirit said:
Which Gcam is best suitable for this ROM? And what recovery should I use?
Click to expand...
Click to collapse
Use latest unofficial twrp by @rama982
https://t.me/tulip_updates/1014
Pavanpatel said:
It's getting continued till the time i own this device so don't worry we have a long journey to cover.
Click to expand...
Click to collapse
Whoa dude, Nice to hear that. ??
A new build is available for download.
Build Date: 18-06-2019
Changelogs:
• An improved theme engine with a lot of new accents colors and a black theme.
• A new and improved launcher with google feed integration, icon pack support, icon size customization, gestures support, etc.
• Added support for microg.
• Fixed booting with Encryption.
• June security patch merged.
• Updated ANT+ vendor blobs from lavender
• Added boosted frameworks
• Update mlipay blobs to 1.1
• Drop mi sound enchancer
• Maybe something more
Download: FROM HERE
Please support me by donating: Paypal
Join the team: Click Here
Enjoy.
Double tap to wake doesn't work on the latest build.
Anyone facing same issue?

Development [ROM][OOS Cam][Android 12.1]StagOS 12.1[lemonade][FINAL][08/09/2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey another day another rom, that's what you might be thinking. but we at stag aim towards elegance. We are learners just like everyone out there, This is small project we have started which helps us learn every single day. Why Stag, you might question, my answer would be why not. After all Harry's patronus was a stag(pun intended). After having a couple of iterations, we still intend to stick to our roots, and keep refining what we have. With Android 12, Stag would still be aiming at an elegantly beautiful close to stock experience, that satisfies just the features and customisations you'd crave for (nothing more, nothing less), at the same time being blazing fast and silky smooth. You'll have to try it to believe it .
~Sic Parvis Magna~
PS: for people wondering what sic parvis magna is, it translates to great endings from small beginnings, Something i picked up while playing a game.
Credits where they are Due:
Google(No explanation needed n this regards)
Lineage(For starting of the custom rom war)​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This Build is a Beta Build, I will not be responsible for any kind of issues that might come up (while flashing)
Pristine Build - Non Gapps: Download Here
Gapps Build: Download Here
Bugs
You tell me ​
Features​
Refresh rate switch
Advanced Reboot
Google Style monet made better thanks to ProtonAOSP and kdragon
OOS Style Screen Recorder (Check qs tiles)
Enforcing Build
CTS Passes
Unlimited Google photos backup (Fingerprint spoofed)
CTS Passes sucessfully
Face Unlock
Less Annoying Notifications
Working Gcam Pre Installed
Ambient Display Gestures
Off Screen Getures
OTA Support
And much much more, hope you all love the build.
The build will be updated with bug fixes, but please don't ask ETA.
Hope you like it.
Please follow the instructions properly.
**Make sure your boot loader is unlocked**
Spoiler: If you are on OOS 11 or OOS 11 based ROM
Follow These Instructions if you are on OOS 11 or OOS 11 Based ROM
Download the boot.img from here
Reboot to bootloader
Use the following command to flash boot.img to both slots
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Reboot to recovery
Format Data (Optional if already on Stag)
Select Apply update
Run the following command
Code:
adb sideload romname.zip
Spoiler: If you are on OOS 12 or OOS 12 based ROM
Follow These Instructions if you are on OOS 12 or OOS 12 Based ROM
Download the boot.img, vendor_boot.img, debt.img from here
Reboot to bootloader
Use the following command to flash boot.img to both slots
Code:
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Reboot to recovery
Format Data (Optional if already on Stag)
Select Apply update
Run the following command
Code:
adb sideload romname.zip
If none of the above methods work, please use the following.
Spoiler: If nothing works
Beware this is OOS 12 C.48 based build so it is important that you follow instructions properly and that you are own OOS 12 C.48.
All builds can be found here
The Proper due credits will be updated promptly, A huge thanks to the Lineage team and luk for bring up of OnePlus 9 trees.
A huge huge thanks to everyone who helped me test it, and develop:
@chandu dyavanapelli for helping me with 12 bringup
and
@aswin_a_s forhelping me deal with some huge issues, and stabilizing source (both rom and device)​@tbiwalkar for always actively testing out 9 builds all the time​EtherealRemnant for testing in general and also, testing multiple builds out to help me fix Verizon.​Yashwant for testing almost all the builds, which made it possible for this build today
Robert, @Jhoopes517, rohan, avid_droid for testing the builds promptly and reporting all the major bugs.
This release would have been super difficult without your help. Thanks a lot.
I am extremeley sorry if I forgot someone, please dm me and I will promptly add your names.
and currently this build is work in progress.​
ROM
Kernel
Device Tree​
I work on this project as a hobby, and the money for the servers completely go out from my pocket.
If you like my work it'd be great if you could: https://buymeacoffee.com/vjspranav
I would really appreciate it.
Thanks and hope you enjoy the build
ROM OS Version: Android 12.1
ROM Kernel: Linux 5.4.x GKI
Based On: AOSP
Version Information
Status: OFFICIAL
Current Build Version: 12.1
Build Release Date: 2022-08-09
Reserved for SS
Changelog - 08/09/2022
Hey everyone, this update took a bit longer. I have been super busy with life. I'll keep changelog this time short and concise.
1. OOS Cam is finally here, everything works.
2. Build is based on August Patch
3. Added volte icon
4. And some stability fixes .
Hope you enjoy this release, this will be the final A12 release for OP9 series, see you in A13
Changelog - 20/07/2022
Hola, We're here quicker then before. This stag build is a simple elegant build that has some beautiful additions. Firstly the build is updated to July Security Patch. Up to date AF.
I'll directly jump on to changelog:
1. Now you have multiple options in alert slider, it's a waste just using alert slider for silent, sound and vibrate. Let's use it for a lot more than that. We call it the Awesome Alert Slider.
2. Added option for higher touch sampling rate.
3. We have an OOS style clear all icon in notifications, it's boring to see clear all text.
4. Now you can flaunt android 12L in your version hehe.
5. We have a screen off fod now, you can use fingerprint when screen is off. You can find the option in Settings > System > Gestures.
6. And many crashes fixed internally )
Changelog - 23/06/2022
Guys this is a small hot fix build that ensures that sensors are fixed. The older update had a bug due to which all sensors stopped working
Changelog - 21/06/2022 - Sensors Broken
Hiya, This time the changelog might turn out pretty long, so yup stay tuned. Before anything else, Yes I realise the time between updates is kinda long, honestly I really try had to get it to you guys much sooner, but this is the best I can do. Another factor that comes in is, every time I add a new feature or fix a bug, I feel like there's something else that can be better, and I go on to fix/work on that, this cycle keeps happening because come on guys, I want to ship out nothing but the absolute best for you guys to use.
And this time with the OOS 12 base, a lot of things broke, and I had to work on fixing things from around up, so without further ado I'll jump right into the changelog. As always, will start with what's bad
Assuming not everyone will read through, please follow the install instructions carefully, as mentioned in OP. else you might end up in brick
So there are two known bugs which I really couldn't fix at this point:
1. Low mic volume in recording apps, calls are perfectly fine (some reported that if you turn on speaker in call once after every reboot, the mic seemingly becomes better)
2. Speaker starts crackling in specific audio (only on max volume) otherwise it's absolutely fine as long as you don't hit the absolulte max.
Ok that aside, now let's get into the good news, the juicy part :
Device Specific:
1. Ok the biggest change, Now the builds are going to be OOS 12 based, partly the reason why there was an even bigger delay, but man o man, the build just flies, you'll forget using any other OS.
2. Biggest challenge was to get the haptics right, the vibrations you feel when you touch your keyboard, or the the haptics when there's a notification, OOS 12 base created a huge mess with them but guess what, you'll not have to worry about them because the haptics are much much better than ever, you'll just fall in love with how your phone vibes (literally hehe).
3. On a few requests, I've decided not to include Gcam in this build, whoever wants are free to install whichever version you want to go with .
4. Verizon sims should finally work, Had multiple tests this time so you should have it working for sure, here's to everyone waiting with a Verizon sim.
5. And everything else that yo love and remember from previous version exactly as they were, if not better
Rom Side:
So here's a lot more magic this time, about time I felt the need of a few essential and good to have feature additions without in the slightest compromising how the usability feels.
1. We now have a working GameSpace dashboard, like for every gaming enthusiasts, finally you can game with the full power without any disturbance of notification.
2. Again for all the gamers out there, we have added some props to allow a game to unlock the maximum FPS possible, for more info:
Spoiler: Click Here
* Free Fire - Spoof Asus ROG Phone 1 will unlock 90 FPS
* COD Mobile - Spoof Xperia 5 || will unlock 120 FPS (only on multiplayer mode)
* PUBG Mobile - Spoof OnePlus 8 Pro will unlock 90 FPS
* Wild Rift - Spoof OnePlus 8 Pro will unlock 120 FPS
* Cyber Hunter - Spoof OnePlus 8 Pro will unlock 90 FPS
* Fortnite - Spoof OnePlus 8 Pro will unlock 90 FPS
3. For apps builds, now we ship a modded Pixel Launcher (credits: source). Gone is the pain of using a half baked custom icons. This is a much more optimised pixel launcher with a lot more goodies (like upto 6x9 grid in launcher)
4. A small aesthetic change, re arranged the layout of qs tiles, gone are the tiles which you rarely used and a rather depreciated wifi/mobile data tile. Now we have separate tiles for mobile data and wifi just like we remember and love from Android 11, and that's what is default.
5. Ohh and on the note of QS tiles, Hasn't it been annoying when you long tap on wifi just to be able to quickly connect but you are having to change the screen, now a small panel pops up as an overlay on the existing screen allowing you to work without leaving whatever you were doing.
6. A proper lock screen charging info, Instead of the boring wrong display, the estimate and wattage have now been fixed, and as multiple people questioned, yes Warp Charging does work .
7. And a highly requested feature (and I can see why), long press power button to turn on torch. You ask and thee shall receive, this build comes with the said feature.
8. Now we allow you to have a haptic feedback on QS tiles, when you tap on that, you know want that, don't you.
9. Some over the hood source changes, that'll make scrolling and animations go whoosh (faster and smoother), especially optimising the download and upload animations.
10. And a huge addition to feature list, Network traffic on status bar. For everyone who have been asking it is finally here.
11. Making life easier with this one, giving you an option to complete pull down the quick status bar either from left side or right side, depending on what you select. So you select, let's say right side, now if you pull down from left you'll have notifications. and if you pull down from right side you'll have the QS tiles. pretty handy right .
12. Added an Ambient music ticker, that'll flash new songs on ambient display, I personally love this, happy to finally be able to have it on stag .
13. Ok finally everything bugging with lock screen pin and pattern has been fixed, which allows to have scrambled pin layout back ).
14. Now directly delete a screenshot if you do not like it, directly from the preview when you take a new screenshot.
15. That's not all, now you can directly feed a screenshot into google lens, isn't that cool.
16. Added font customisation and a huge bunch of fonts, you'll absolutely love it. (We also have status bar, launcher icon customisations) you can find them in Horns > System.
17. Don't like watching '!' when mobile data is off ? worry not you can disable that now. see super thoughtful of me (just kidding)
18. If you are like me, you just want to watch the battery percentage on quick header and not something like "6 hours remaining", so like any sane person would do, I have added an option for you guys to be able to delete it.
Well that's all the changes for this update people....
oops spoke too soon, there's,more
19. Here's a little gesture touch, we now give you an option to turn of sleep either by double tapping on status bar or double tapping on Lock Screen. Use both or use neither upto you.
20. Wanna wake up your device using volume keys instead of power button. Just like shenron would say: "Your wish has been granted"
21. Ever seen a Samsung phone, Noticed their pop up notification (click here for reference), See how non intrusive and beautiful they look, don't be sad, you can have a very similar experience in stag, just go ahead and enable reticker from Horns. yay!!!
22. Ever see all the real estate in the status bar being wasted, the clock being so annoyed stuck beside camera, now you have the ability to customise it's location and the control that gives is amazing.
23. Made battery settings beautiful, added battery health info and capacity info so you also know what you have.
24. Added data usage panel.
25. Nav bar inversion, used to inverted back and recents layout, fear not when stag is here.
26. Smart auto-rotate, i.e. you rotate the phone by mistake when auto rotate is on, and phone just annoyingly rotates? not gonna happen that often anymore, phone will keep a track of your face and rotate only when it deems necessary based on orientation of your phone. (Will lead to higher battery consumption)
I could go on, but that's about most of it, there's still tiny under the hood improvements which aim at making stag ever better,
A huge change set this time, so I really am looking forward for you guys to try this build out, I really really wish you would love it and never want to leave ..
Happy Flashing
~Sic Parvis Magna~
Changelog - 10/04/2022
Hola guys long time no see, I know I promised monthly updates, but this one stretched far too long. The reasons include my college and android 12.1, which was a huge pain for me. But nevertheless here we are as stable as ever ).. Ok as always
Without further ado, I'll quickly list down the Changelog.
Bad news first:
1. We won't be having OOS camera anytime soon, Almost everything works except for rear normal photo, I need some help for fixing hence I am not including it in release builds. If anyone wants to try it out, feel free to pm me on telegram: @vjspranav.
Ok that was it, everything further just keeps getting better.
Device Specific
* Tweaked the position of alert slider UI to make it feel more natural.
* There was a small chance of sim not being detected on first boot, that has been fixed.
* Issues with Verizon have been fixed. A few devices report it as working, a few report it as broken, so you can probably just try it out and let me know.
* Wait must have been super annoying to see wrong charging info on Lock Screen, stuck at some 1hr 24 mins always. Now your phone works as it should have! Lock-screen charging info now shows correct estimates.
* One of the biggest things, we no longer spoof our whole device as pixel, It detects as a oneplus and that helps a great deal with refresh rate in a few apps. And guess what!?
CTS still successfully passes ).
* Added a bit of optimised charging support, although you can't control start stop percentage, your phone will still make sure to stop charging after a certain point. This will be adapted based on your usage.
* Finally for everyone not being able to flash gapps on pristine build, Now you can do so and much more, The issue has been fixed. You can flash any and every apps package, be it micro, mini, full or stock.
* For people having Indian version or any other version which does not support wireless charging, they were unable to turn off, power sharing. Now you all don't have to worry .
Rom
* Updated to Android 12.1 with April security patch, nothing but the latest and the best.
* Added back charging animation ripple removed as part of 12.1 by Google.
* Temporarily removed pocket lock as it is causing issues with device wake.
* Added quick unlock with pin, many have asked for it.
* Added option to enable always on display on charging only.
* Added options to customise fonts and styles of status bar.
* And a lot of under the hood changes thanks to both android 12.1 and also things we at stag do.
As always, stag is as good as you last remember it if not better. I really hope you enjoy the build, and keep showing the love!!.
Cheers
Changelog - 25/02/2022
Hello everyone, first of all, sorry for the delay of two months. I was super busy with life and had covid and college and stuff, secondly I am super happy and thrilled for the support everyone has been giving. I really hope you find this build and also the next exactly to your liking if not more .
Without further ado, I'll quickly list down the changelog.
Device Specific
* Firstly The clock being overlapped by camera cut out, padding issue has been fixed.
* On Lock Screen, you must've seen FP icon and charging info overlapping each other, this issue has also been fixed.
* You must've loved the new unlock animations of A12 right?, But I'm sure everyone felt, the power button location of animation is off, guess what we've got that fixed too!
* Ohh how could I forget, the dreaded ring issue, you won't have to face it anymore, every call you do will for sure have a ring giving you the peace of the call being connected and not having to face surprises.
* We Added OnePlus Specific Settings, That let you select Hyper Touch, Edge touch etc.
* Added Touch screen gestures, these are just love (we also support single tap for ambient display )
* Wake device on pick up, and a couple more ambient display options have been added.
* Build comes with a pre installed working GCam on gapps build.
* Wanted to share your battery to your friends? We have power share toggle added, you can wirelessly or through wire charge your friends phone or any chargeable device!
If you think those are good, wait till you see, what the ROM brings
Rom
* Updated to February patch.
* Ever wanted to look at your phone, and just wanted it to unlock, no sweat, stag has the long awaited face unlock support now.
* We have ota support now, all further builds can be downloaded and installed seamlessly over OTA.
* Added an idle battery manager, this helps in saving idle battery.
* Guess what ever wanted too listen to your class and YouTube, and wanted to decrease volume of your class/meeting only ? It's now possible, we have per app volume control, let your meeting run in silence and let the music begin!. (just kidding, we have the feature but don't miss out on classes )
* I believe there was an issue with no default notification or ringtone in the last build, worry not we got you covered!
* And remember that annoying screenshot sound ? I don't, because we don't have it anymore.
* And And, Live translate works, Complete the initial setup and update all apps, and you're all set.
* For all the enthusiasts, we have an amazing black theme, I know you are there and you are going to love it!
* You scared your phone gets unlocked in your pocket? Well just a toggle and your phone can be smart enough to not unlock as long as it's in your pocket! with pocket lock.
* You like your brightness slider at the bottom? Do not want to see the auto brightness icon ? Or don't want to see the bar at all ? Well you can do all of them now.
* We have saner heads up now, if you are constantly annoyed by every notification pop up on your screen! Explore it to know it.
Upcoming
* We are working on OOS Cam, we have potrait pro mode etc working, so expect to see the next build with OOS Cam .
and too much more, small changes and tweaks to make your experience the best possible!!.
Due to the volume of changes, it is highly recommended to clean flash for the best experience.
Nice flashing now !!!!
Dont try it if you are coming from oos 12 stable . no luck. You must come from oos11
*even from oos 11 no luck.
It booted fine on the TMO op9 fingerprint sensor just flashes when I try to register but other than that everything else works perfectly. Thank you!
JimmyJurner said:
It booted fine on the TMO op9 fingerprint sensor just flashes when I try to register but other than that everything else works perfectly. Thank you!
Click to expand...
Click to collapse
can you tell what recovery you used to please? and from what os did you flash it ?
Woot excited for a new rom to flash. Sick
papad13 said:
can you tell what recovery you used to please? and from what os did you flash it ?
Click to expand...
Click to collapse
I came from an older version of lineage recovery because when I tried using the newer one it would not boot to the recovery. I came from 11.2.10.10 after using the TMO convert msm
Now that it booted android 12 let me try a fresh recovery flash of the newer one and start from scratch.
It booted to the newer recovery fine this time. Booted to the os as well. Still no fingerprint sensor. It seems it it just won't register.
JimmyJurner said:
It booted to the newer recovery fine this time. Booted to the os as well. Still no fingerprint sensor. It seems it it just won't register.
Click to expand...
Click to collapse
At initial install,use the 0626 dated LineageOs recovery.img. Any newer nightly build losrecovery may cause an issue. After installing recovery and installing system, do not attempt to flash any recovery on device. It messes up the Os. I'm running Stag and FP sensor is working fast and easy on my end
avid_droid said:
At initial install,use the 0626 dated LineageOs recovery.img. Any newer nightly build losrecovery may cause an issue. After installing recovery and installing system, do not attempt to flash any recovery on device. It messes up the Os. I'm running Stag and FP sensor is working fast and easy on my end
Click to expand...
Click to collapse
Yeah , everything else is giving a non bootable device . Only booting on fastboot
Maybe a good advice for the TS to add it in the post !!
papad13 said:
Yeah , everything else is giving a non bootable device . Only booting on fastboot
Maybe a good advice for the TS to add it in the post !!
Click to expand...
Click to collapse
Everything is being updated in OP soon.
avid_droid said:
Everything is being updated in OP soon.
Click to expand...
Click to collapse
Yep soooon,
But I spend about 3 hours just to come back on oos11.
In a "tested" build !!
Who cares
avid_droid said:
At initial install,use the 0626 dated LineageOs recovery.img. Any newer nightly build losrecovery may cause an issue. After installing recovery and installing system, do not attempt to flash any recovery on device. It messes up the Os. I'm running Stag and FP sensor is working fast and easy on my end
Click to expand...
Click to collapse
LOS RECOVERY 06/26
papad13 said:
Yep soooon,
But I spend about 3 hours just to come back on oos11.
In a "tested" build !!
Who cares
Click to expand...
Click to collapse
3hrs? I can MSM and update to 11.2.9.9 then Beta 1 and up to C.39 in less than an hour.
It's not a test build,testing is over.
I've messaged OP and instructions and files will be updated soon.
Yep ,you are the one yeaaa!!
You have it bigger !!
I can do it to !
But I was trying to install THIS rom ,with different lineage recoveries .
Because even in the first upload of the TS the recovery was for lemonadep (onep9pro)
So no luck .
I had a personal conversation with the dev and he changed it to the newest and right one .
But even this that is uploaded now it doesn't boot.
papad13 said:
Yep ,you are the one yeaaa!!
You have it bigger !!
I can do it to !
But I was trying to install THIS rom ,with different lineage recoveries .
Because even in the first upload of the TS the recovery was for lemonadep (onep9pro)
So no luck .
I had a personal conversation with the dev and he changed it to the newest and right one .
But even this that is uploaded now it doesn't boot.
Click to expand...
Click to collapse
Okay,so, I'll post instructions for you here until VJS updates it with file links.
Disclaimer: I am not responsible if you destroy your device. Method posted is tried and true and will work if directions are followed.
You must be updated to latest,11.2.10.10
Unlock bootloader
Here are the files needed:
Recovery:
https://androidfilehost.com/?fid=14943124697586357860
Copy partitions:
copy-partitions-20210323_1922.zip | by The Muppets for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
In bootloader:
fastboot flash boot losrecovery-0626.img
Reboot to recovery
adb sideload copy partitions.zip
Reboot recovery
Format data
adb sideload StagOS.zip
Reboot and enjoy
Warning: Do not attempt any other flashing of recovery as it may result in having NO OS!
avid_droid said:
Okay,so, I'll post instructions for you here until VJS updates it with file links.
Disclaimer: I am not responsible if you destroy your device. Method posted is tried and true and will work if directions are followed.
You must be updated to latest,11.2.10.10
Unlock bootloader
Here are the files needed:
Recovery:
https://androidfilehost.com/?fid=14943124697586357860
Copy partitions:
copy-partitions-20210323_1922.zip | by The Muppets for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
In bootloader:
fastboot flash boot losrecovery-0626.img
Reboot to recovery
adb sideload copy partitions.zip
Reboot recovery
Format data
adb sideload StagOS.zip
Reboot and enjoy
Warning: Do not attempt any other flashing of recovery as it may result in having NO OS!
Click to expand...
Click to collapse
Yep thanks . I knew all this !!
But it wasn't available in the op.
Even now that the dev knows that if you come from oos12 : no boot.
If you try with the newest lineage rec : no boot

Categories

Resources