Code:
/* * I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). * Please do some research if you have any concerns about features included in the products you find here before flashing it! * YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. * Your warranty will be void if you tamper with any part of your device / software. * Same statement for XDA. */
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's Different from lineageOS 16? or Why lineageOS 16 MOD? :
Very few minor changes which i usually miss in lineage-OS. So i decided to include those features and make my own lineage-OS build. I am just a noob when it comes to this stuff, so it won;t be turning into a ROM with lots of features. I will add some minor changes and also include some changes which are being reviewed but not yet merged. Sort of like sneak peak or aplha lineage OS 16 build.
As of now whats different from lineage-OS 16 and also what i am working on.
Customization of QS tiles (Omni Style)
Ability to set ringtone of both sims.
Show icon of package associated with Toast
turn on development settings by default
Added cycle mode for QS location tile
Included MIUI cam
ScreenShot sound Settings
New voLTE icon, oxygenOS style
Dark theme notifications fixed.
auto call recording
Font manager
Pixel Style lockscreen weather
Q style battery icon
gaming mode and sound tile
LockScreen Charging info and toggle
Screenshot sound toggle
What's working :
Boots
Volte
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
voice over wifi works for airtel(airtel india)
Known issues:
2 QS tile in landscape Mode are outside notification drawer if you set columns too high. (trying to fix it)
CREDITS @GuaiYiHU (this build would have not been possible without his work)
jhenrique09 (again lot of stuff for whyred)
Nidhun Balaji (for dirac support in los)
Bladeyy (for helping me with some silly mistakes and more)
Adams for wasting his limited data on my test builds.
Lineage Team Ofcourse
just remind me if i missed someone
Source Code:
https://github.com/lineagemod/android
ROM OS Version: 9.x Pie
Based On: Lineage OS
Version Information
Status: Stable
Created 2019-01-05
Last Updated 2019-06-13
Download http://bit.ly/los16mod-whyred-afh
http://bit.ly/los16mod-whyred-sf
TEST Build (everything works, just test builds for new features)
https://sourceforge.net/projects/kapiljhajhria/files/test/
Will cause device to force Encrypt(not sure but just to be safe)
Make Sure to flash FDE disabler Zip if you want your device to stay decrypted.
Change-logs
19/04/20
April Security Patch
Q wifi icon
Note:
Download from AFH, not able to upload to SF
29-03-20
Downlaod from Gdrive(not able to uplaod to SF or AFH for now)
March Security patch
Note
I started from scratch. complete rebase. So you need to do clean flash.
so far features that i have added back
1. qs tile customization
2. screenshot sound toggle
3. los network meter bug fix
4. add gamin mode tile
5. OOS style switches
6. MIUI camera
7. auto call recording
8. dPhone ringtone setting for Multi SIM device
9. Add deep sleep info to uptime
will try to add other features along the way.
15-02-2020
download from HERE
feb security patch
22-08-2019
Device CL
- Vendor blobs updates from MIUI
- GCam fixes
- Perf blobs fixes
- Audio configs cleanup
- GCam patch included
- I made a patch to ignore RSSNR signal level
and more
-same as srfarias's build as its based on his trees.
»Upstreamed Los
[Los feature]Now the devices connected to your whyred hotspot can make use of its VPN. This means if you are using adblocker like adguard then all the device connected to your hotspot will have adguard protection as well.
?
My internet is down from last 24hr, so it will take me time to upload the rom to SF.
11-08-2019
Clean Flash reuqired
Device CL
- Vendor blobs updates from MIUI 9.8.8
- In call volume fixes
- Other audio issues fixes
- Set fifo ui prop for EAS
- Dexpreopt all except prebuilts
- Build fingerprint from miui stable to fix cts
-and lot more, same as srfarias's build as its based on his trees.
ROM CL
»Aug SP
»Los Upstreamed
»VoLTE icon toggle
»Auto Face Unlock toggle
»Lockscreen Charging info and toggle
»Battery icons option FC fixed
I rebased the rom recently to fix battery icon options FC. will add back microg support in next build.
Features so far
»QS customization
»Turn on development settings by default
»Screenshot sound toggle
»Phone ringtone setting for Multi SIM device
»Add support for theming notifications
»Implement weather on lockscreen like Pixels
»Sound tile
»Gaming Mode tile
»Auto face unlock toggle
»VoLTE icon and its toggle
»Font engine service, around 40 custom fonts option to choose from
14-07-2019
»july security patch»los upstreamed
»Q style battery option and voLTE icon has been removed for now, it will be added later. portrait and text option are the only available options under battery icon styles for now.
Note:
i am busy this month so no features this month. will add more features next month. OTA still not working as i don't have enough time right now. will fix it next month.
11-05-2019 (Pie Firmware only)
-May Security Patch
-blobs Update to MIUI 9.4.25
-Los Upstreamed
17-04-2019 (Pie Firmware needed)
»Supports Pie firmware Now only pie firmware
» MAC randomization (under Developer options)
»GuaiYiHu's Kernel Upstreamed (pubg HD mode and Kcal added)
»Los Upstreamed.
» Not Pushing OTA for this build as it needs Clean flash.
11-04-2019
-working OTA
-can check Changelogs from Updater app as well
-April Security patch
-Los Upstreamed
24-02-19
Changelogs:
- network meter fixed (los upstreamed)
- guaiyihu's kernel upstreamed.
- Update SDM blobs from LA.UM.7.4.r1-04100-8x98.0
- Pin critical apps and system services that get swapped, pin launcher as welll.
- also in previous build users were not able to flash some custom kernels. thats fixed as well.
- can choose hd mode in pubg now?
- and some other small changes/fixes as well.
06-02-19
[/HIDE]
- Added Dirac support
-f2fs support added (only ROM, not kernel)
-feb seucrity patch
-sound tile added
-fixed whatsapp video recording not working
- Update build fingerprint to MIUI V10.2.2.0.OEICNXM
- Update vendor security patch level
-Add support for forcing 18:9 full screen aspect ratio
-Fixed night light, reading mode
-Fixed sms notification sound (need confirmation from more users)
-Fixed wifi and hotspot issue faced by some user on previous build.(again, need more confirmations)
»dirac support temporary, might be removed in next build. depends on user feedback
»if u don't notice any difference try stopping music and resuming it again.
»SF mirror takes time, will be up soon on SF as well.
» thanks to Nidhun Balaji, GuaiYiHu and jhenrique09 for this build.
[/HIDE]
13-01-19
-Selinux Enforcing
-Added voLTE icon
-Added option to disable Screenshot sound
-Added Auto Call recording option in dialer.
-removed Lineage Camera2, wasn't working anyway.
-Smart Lock enabled by default. Makes it easier to find face unlock now.
-Also now face unlock takes you directy to homescreen, before it used to just unlock device but still stayed on lockscreen.
-Gcam Removed temporarily, will be back soon.
- As usual upstream, upstream, upstream
09-01-2019
-Jan security patch
-Fix no default ringtone for slot2
- added gaming mode tile
-Implement aggressve DeviceIdle
05-01-2019
-Update some blobs from MIUI V10.2.1.0.OEICNFK
-Privacy Guard is now working
-Supports Encrypted Device now. You don't need decrypted Device.
-Singature Spoofing for MicroG (Let me know in the group if MicroG is working for you. As i haven't tested it. But signature Spoofing Works)
-Upstreamed Sources
FAQ and More
Q: Does it Support Dual LTE?
A: Yes
Q: Does it have data switch bug?
A: No it doesn't. If you are using dual sim then you can easily switch data sim and if you use Sim2 for data then it won't reset to Sim 1 on reboot.
Q: Can i use google pay and other such apps?
A: Yes, make sure to use magisk hide and hide root from google Service framework, com.google.android.gms.setup and google pay. You don't have to deny phone permission of google play services in this rom. if some other app detect root then you can try to hide phone permission as well. But for google pay you don't have to do it. Just magisk hide is enough.
You can also go to magisk manager settings and tap on hide magisk manager. After this is done just toggle magisk hide off and one once. Also force stop the app and launch it again. Reboot.
Even after everything, if some app is detecting root then you are out of luck. .
Q: My device is encrypted. Can i flash this ROM without wiping my device?
A: Yes you can. as of 05/01/19 this ROM supports Encrypted device.
Q: How to prevent Force encryption?
A: If your device is decrypted and you want to stay decrypted then check out this XDA Thread .
But if your device is encrypted and you want to decrypt your device then you will have to wipe your device and loose all data.
Q: Which gapps do you recommend?
A: Pico or nano
Q: Does it Support MicroG?
A: It should, i have added Signature Spoofing in 05/01/19 build. Give it a try and let me know. Also as far as i know, microG is still in sort of beta phase for Android Pie. Isn't it? So make sure to check this first and only then Report any issue with microG. First check if its MicroG issue on pie or if its not then let me know the issue.
Q: Can you add xyz feature?
A: I am not a developer, i can compile roms and fix some conflicts. You are free to request features but that doesn't mean i will add them. I might consider them and try to add them. But i might not be successful .Because as i have told you already. I am not a pro.
Q: No Progress bar when i download apps from playstore.
A: Go to Settings-Apps and from top right corner. Tap on 3 dot and enable show system app. Now look for android Setup and disable this app. Reboot.
[COLOR=inherit !important]
#s3gt_translate_tooltip_mini { display: none !important; }[/COLOR]
Just in case
Download link of 05 01 2019 doesn't exist
Edit now exist
venezolano69 said:
Download link of 05 01 2019 doesn't exist
Edit now exist
Click to expand...
Click to collapse
it does now. was uploading the build. Its done now. also added change logs
Forgot to add signature spoofing in CL, adding it now
Wew...congrats.
Great work! Can I choose the performance profile in setting s-battery- battery saver and performance? Like the pic shows, thanks you very much.
Hi nice ROM bro, how you doing? Some bugs name you saying did you updated them?
cwr250 said:
Great work! Can I choose the performance profile in setting s-battery- battery saver and performance? Like the pic shows, thanks you very much.
Click to expand...
Click to collapse
Yes you can
Sent from my Redmi Note 5 Pro using Tapatalk
Azharlala said:
Hi nice ROM bro, how you doing? Some bugs name you saying did you updated them?
Click to expand...
Click to collapse
OP is updated with everything. Bugs that i am aware of and working on. If you find more then report and i will add it to the list
Sent from my Redmi Note 5 Pro using Tapatalk
Hi, can you customize the main screen so that you can add your iconopacks like in LineageOS 15.1?
is carrier video call working vilte
Dgonix said:
Hi, can you customize the main screen so that you can add your iconopacks like in LineageOS 15.1?
Click to expand...
Click to collapse
Its a launcher feature. Los15 didn't had quickstep. Los16 uses quickstep. You can use any third-party launcher. I will try to add los15 launcher as well in next build.
kcala said:
is carrier video call working vilte
Click to expand...
Click to collapse
Haven't tested it as i don't use it. Is it working in other Pie roms? Is yes then it should work here as well. I will try to test it..
How's the battery on this ROM? How much SOT can I get?
Kapiljhajhria said:
Haven't tested it as i don't use it. Is it working in other Pie roms? Is yes then it should work here as well. I will try to test it..
Click to expand...
Click to collapse
No, All pie rom i used till now self video shows but call disconnect the moment call connects
kcala said:
No, All pie rom i used till now self video shows but call disconnect the moment call connects
Click to expand...
Click to collapse
Will test as soon as i can. I never use it so can't really test it.
Sent from my Redmi Note 5 Pro using Tapatalk
Kapiljhajhria said:
Will test as soon as i can. I never use it so can't really test it.
Sent from my Redmi Note 5 Pro using Tapatalk
Click to expand...
Click to collapse
Thanks
Added game mode tile[emoji7]
For next update.
Sent from my Redmi Note 5 Pro using Tapatalk
Related
This is a Official Build of madOS ( based on AOSP N ) for Jiayu S3 (Adv./Basic/Pro) with MTK 6752 SoC
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download ROM from M.A.D. Facebook
OR via xda DevDB
Download OpenGapps nano or pico from OpenGapps
(choose Arm64 and Android 7.0 / Android 7.1 / Android 7.1.x -Depending on the rom build you downloaded)
Download BeansGapps MINI from BeansGapps
(choose the MINI Package)
Boot to recovery
Wipe data if you are not coming from AOSP N / madOS already
Install rom
Reboot to recovery again, and Flash your desire Gapps
Reboot
Working:
RIL (Calls /SMS, Data connection)
Wifi
Bluetooth
Audio / Mediaserver
Sensors
Lights
Both storages & MTP
HW de/encoding
Camera (photos)
GPS & aGPS
Audio recorder (both mono & stereo)
HDR photos
Camcorder
NFC ( available only on the advance version)
Not working:
You tell me
XDA:DevDB Information
[ROM] [ 7.0 | 7.1 | 7.1.1 | 7.1.2 ] Official madOS - Jiayu S3 [MT6752], ROM for the JiaYu S3
Contributors
superdragonpt, DerTeufel1980, fire855
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-10-26
Created 2016-08-31
Last Updated 2017-05-27
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP recovery for the Jiayu s3
available here
Update to TWRP v: 3.1.1-0 Mandatory for 7.1.2:
available here
Q: Do i need to make full wipes?
A: Usually that is only needed when there's big changes or Android version is updated,
i.e.: Going from n7.1.1 to n7.1.2, full wipes are mandatory
Q: What is "full wipes" ?
A: To Wipe : ART Cache; Cache; System; DATA
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: What's working ?
A: Check first Post for current status
Update for 7.1.1
Q: When I try to install the ROM it says "Error 7 symlink failed", what gives?
A: You need to unmount /system first on twrp
Q: After flashing TWRP says "No OS Installed?"
A: Ignore this message. If the ROM flash indicated as being successful, you can swipe to reboot and the OS should boot.
Q: Do i really need full wipes?
A: Yeah
Q: App "x" doesn't work, why?
A: Probably not compatible with Nougat yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with SuperSU v2.76 onwards.
For 7.1.2: Latest SuperSU ( 2.79, etc)
Q: Does xposed work?
A: As of now, there's no Xposed for N, so no
Q: Does busybox still works on Nougat?
A: yes
Q: AdAway no longer works on Nougat, what can I do?
A: Simply install busybox first, available from the Play Store, and it'll download hosts and work just fine then
Q: Data Connection does not work, why?
A: The ROM, already includes latest APNs, if you still have no active data connection, check your APN settings
Q: How is battery life with Nougat on the Jiayu?
A: It should be comparable to Marshmallow.
Update: We've already fixed several memory leaks and draining issues
Q: Does this build support Vulcan?
A: No. Vulcan does not provide support for MediaTek (yet?)
Q: Does doze work in this build?
A: Yes. You do not have to enable anything; it is active by default.
Q: Does this ROM supports Substratum ?
A: YES, latest rootless substratum is supported on madOS
madOS: We are now an Official Substratum supported rom
Q: Does the ROM features disabling SIMs , On Settings SIM Options?
A: YES, we've now merged our own implementation (adapted for N)
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A: BeansGapps or Open GAPPS
Update 7.1.2
Beans GAPPS (MINI) or OpenGapps (pico/nano) Packages, are recommended
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
Slim Roms
Pure Nexus
AOSPA
Lineage
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...
Change Logs
Build [7.0] 20160831 -ALPHA-
First release
Build [7.0] 20160904 - Beta 1
Fixed RIL (Incoming Calls, other ril issues)
Fixed Data connection
Fixed Hardware decoder/encoder
Fixed Sound / Mediaserver issues
Fixed Camera (Photos)
Fixed RadioFM
Fixed Hardware Keys lights
Other system issues fixed here and there
Added M.A.D. extras (fastcharge, smartwake, performance settings, sensor tool)
Also:
Working Modded Gapps
Build [7.0] 20160912- Beta 2
Updated to Android 7.0.0_r6 NRD90U (security patch level 6 September)
Updated Kernel to 3.10.102
Fixed GPS & aGPS.
Added fulls APNs (most recent from CM14, stock AOSP only haves some US carriers)
Removed AOSP Music app (incompatible)
Added Gello ( CyanogenMod) Web Browser
Fixed Data Usage Monitor
Fixed Data saver
Other issues fixed here & there
Build [7.0] 20160923- RC 1 ( Release Candidate )
Repo sync latest 7.0.0_r6
Updated kernel version to 3.10.103
power: wakeup improvements
sched and cpufreq improvements
Slub, slab, mm upstream merges
Added more advanced TCP Congestions Control algoritms
( Available now: Westwood, reno, bic, cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp, illinois)
--> Deafault TCP Cong. is now the newest Westwood
CPU Governors: Interactive and Userspace updated to N, added new Wheatley Gov (it's great for performance/battery)
I/O sched: Added newest FIOPS
ARM upstreams
Fixed audio recording
Fixed sensors calibration
Fixed FMRadio issues (volume control, audio routing and now a working FM recording)
Switched to new N audio policy configuration
Fixed DRM issues
Switched to newest OpenGL, GLes
Quick Settings: Add Reboot & Reboot to Recovery Tile
Google Apps : Fix SetupWizard Force Closes
Google Apps : System-Apps Work around for apps signature v2
Google Apps : Fix & grant default permissions
Google Apps : Fix some weird issue where contacts would never sync
Google Audio Files from Android 7 (AOSP N, still uses Old ones ), ringtones, UI,etc.
Status bar carrier: don't show Emergency text if no sim is installed
Dex preopt optimizations
Drop more useless / buggy stock Nougat apps
Switched from AOSP Launcher2, to the newest AOSP Launcher3
Materialize toast frames
Several memory leaks fixed
Several Null Pointers fixed
Some missing symbols fixed
Several SystemUI fixs
improve priority for callerinfo selection
Fix ListView issue, when is not scrolled properly with arrows
Fixed some MediaScanner issues
Added support for more webviews
Telephony: Signal strengh improvements (WIP)
SmartWake: Red!
Added ExFAT: initial support
Show icon of package associated with Toast
Optimize IncallUI delay for voice calls
Show LTE instead of 4G (Consistent with Stock behaviour)
Activate some missing DOZE features, that where missing
Update gello Browser version
Make restorecon_recursive work for /data
healthd: increase healthd fast timer to 10mins instead of 1min
Unicode: Correct length computation and add checks for utf16->utf8
camera: Fix a weird high battery drain when using flashlight
Always show screen on time
Skip Misc/Overcounted battery stats
Add fastscroll to the Manage applications screen
Wi-Fi WPS Materialized icon
Open app when clicking on icon in App Info screen
Some BT issues fixed/improved
Show application's package name in the "App info" screen
Remove all Google Legal stuff, System Update Settings (we are not Nexus ...)
And other stuff i likely forgot to mention ...
Build [7.1] 20161026- STABLE 1
Updated to latest Nougat: 7.1 [ NDE63P ]
user build now (userdebug contains su for command line, and some games requires device to be un-rooted, at all stages)
Fix audio recording (mono / stereo now working)
Fix NFC
Fix Camcorder ( check note)
Fix battery draaaaaain
( & more mem leaks patched )
Fix Adaptive Brightness issues
Added full substratum / masquerade support
( Theme Engine )
Added reboot Options
M.A.D. Settings: Fixed all issues & added some more options
More custom M.A.D. options:
Dual ringtone (choose a ringtone per SIM)
Option to Enable/ Disable SIM Cards
SIM color ( colorize Network bars,etc per SIM)
APP-OPS
Others..
New Wi-Fi WPA supplicant
Reworked RIL (network) with many fixs for N
Reworked Audio driver
Added standalone file manager
Reworked SNAP Camera with Better MTK compatibility
Added custom headphone control:
(3 buttons: the right and the left one (normally only for volume) can switch now between tracks with a longer click)
And of course Rom is packed with new 7.1 features : Night Light, etc ...
Changelog is quite extensive, will add more relevant changes if I remember...
Build [7.1] 20161123 - Stable 2
Changelog:
- Updated to NDE63X (security patch level: 6th November)
- fixed camera recording
- fixed all audio quality issues
- fixed NFC
- Updated bluetooth system (incall audio still broken )
- Added partial screenshot feature (long press on screenshot in power menu)
- Improved sim switch
- Fixed flashlight tile
- Various other improvements
Build [7.1] 20161203 - Stable 3
Changelog:
- fixed BT call audio
- fixed 'prevent audio ducking'
- improved webview package handling
- fix theming of 'button settings'
- add Russian translations by Borizzz
(more translations to come)
- Various other improvements
Build [7.1.1] 20161207 - Stable 4
Changelog:
- update to Android 7.1.1
- improved bt audio
- added 'longpress button to kll foreground app'
- fix screen unpinning
- improved Russian translations by Borizzz (more translations to come)
- Various other improvements
Build [7.1.1] 20161212 - Stable 5
Changelog:
- fixed led notification for missed calls
- improved substratum support (OMS7)
- fixed tethering
- added option to control scroll friction and velocity
- added PixelUI navbar
- fix black screen issue
- fix setting of wallpapers
- Various other improvements
Build [7.1.1] 20170105 - Stable 6
Updated to N4F26M
Security patch level: 5th January 2017
Enabled Enforcing SELinux
Added long-press power for toggling torch feature
Merged security patches
Fixed notification led settings
Other small improvements
Build [7.1.1] 20170122 - Stable 7
Updated to 7.1.1 ( N6F26Q )
Improved SE Enforcing Linux (fixed some denials)
Improved Satellite Navigation: Glonass now is properly used & better precision
Improved LED custom Settings
Improved Tethering
Improved SmartWake
Improved hall sensor support ( flip cover )
Added Battery customizations (M.A.D. Extras)
Improved media HW decoding & encoding
Better handling of other WebViews
Fixed some ANRs & NullPointers & other optimizations
Added new Russian Translations (thx to Borizzz)
Others things i likely forgot
Build [7.1.1] 20170213 - Stable 8
Updated to 7.1.1 r22 ( NMF26X )
Security patch level: February 5, 2017
Improved media HW DEC & ENC (partially revert some changes introduced on latest build)
--> youtube 720p/1080p @60fps plays fine (no "zoom bug" )
Increased Volume Levels ( MIC/ LoudSpeaker/ Media, etc)
Other sound improvements (Quality)
Improved Hall sensor ( new own handling )
Camera: Improvements on default app ( Snap )
Update System Sounds (ringtones/ etc)
More Russian Translations ( @Borizzz ; thx again )
M.A.D. Extras Settings:
Battery Customizations:
Option to change status style (portrait; icon landscape; circle; text; hidden)
Battery Percentage (inside icon; hidden; next to the icon)
Double-tap to sleep
Brightness Control
Slidding Home button
Clock Customizations:
Option to show clock and Date
Option to show clock seconds
Alignement: Right clock; left; Center
AM / PM Clock
Date Options: Hidden; Small; Normal
Date format
Network Traffic Customizations:
Options for Network Traffic Monitor (ingoing, outgoing; both)
Display Unit
Update interval
Hide/ Show arrows
Auto hide
Inactivity threshold
Navigation Bar Customizations:
Buttons & Layout Options
Show / hide arrows keys
Enable/ disable Pixel design
Nav Bar dimension Options ( choose dp for height/width)
Nav Bar button tint ( choose color)
Slide Nav bar actions
Nav Bar Navigation dimmer options
Dynamic NavBar Background
Option to choose NavBar on/when in rotation
Many other small improvements
Build madOS [7.1.1] 20170309 ( Stable 09)
Changelog:
Update to 7.1.1 r28 N6F26U
Android Security Patch Level: March 5, 2017
Kernel updated to 3.10.105
(including many security Fix's)
Added new M.A.D. Offline animation
Improvements on default camera app (Snap)
Added new rootless substratum Theme Engine
[*]Added Scheduled power ON/OFF
( with the hability of power OFF alarms)
Added new translations:
- German translated by M.A.D. team & curtisy1
- Portugese (PT) translated by M.A.D. team & fusant
- Russian translated by Borizzz
- French translated by Wandrille du Chalard
- Greek translated by sokolataki
- Chinese (Simplified) translated by Han Jian
- Catalan translated by Si-nek
- Italian translated by LucaT69
- Spanish translated by Danic23
Improved M.A.D. Navigation Bar
Fixed WhatsApp issues
Improvements and fixs on QS
Many, many other small issues fixed
Build madOS [7.1.1] 20170311 ( Stable 10)
Changelog:
Fixed a (huge) Memory leak, introduced on latest build
Fixed Scheduled power ON & power OFF alarms
M.A.D. Extras: PIE is here!
Rom performance optimizations
New translations from Github merged
Build madOS [7.1.2] 20170527 ( Stable 11)
Update to 7.1.2
Patch Level: May 2017
madOS version v1.1
Introducing:
madlauncher: (AOSP based, but on mad steroids with several options)
madCamera: Our own camera (with several improvements for MediaTek based devices)
Telephony :
RIL improvements
Fixed a badass NullPointer on Telephony (Operator related)
Network / SIM Status fixes
wlan and connection improvements
Camera improvements & fixes
Added sdcardfs support
Support for the new substratum (madOS is now an official supported rom)
Other Features:
omnijaws weather (Lockscreen & Status bar,etc)
--> with huge madOS improvememts over the original implementations
Power Menu Options
One handed mode
Lockscreen PIN quick unlock & quick unlock improvements
Added SIP Options
QS (Quick Settings) Options
Custom Carrier Label options
madOS NavBar: fixup
Bluetooth: battery status options
AlarmsBlocker
WakelockBlocker
Recents Options
Pie: New SlimPie (ported by mad from lp to N) & improved
Tiles:
CompassTile
NFC Tile
Compass & Language toggle Tiles
madOS Tile
etc ..
Other fixes & Improvements:
couple GAPPS related issues
location provider errors
SchedulePowerOnOff
facelock
Removed Gello , Welcome chromium
faster app switching
AppOps
gesture events
PhoneWindowManager
anr's
NPE's
memory leaks
masOS offline charging animation
Dashboard & madOS settings cleanup
Miracast issues on some dongles
There's other fixes & features included on this release
--> Too much to write on a changelog
Build madOS [7.1.2] 20170605 ( Stable 12)
madCamera fixs (including write to ext SDcard)
DeskClock fixs (including the alarms gone on rotation)
Fix mounting SD on PC (windows) (introduced by the new sdcardfs feature)
Update APN's (including some issues reported by some members)
Camera improvements (including Sensor Hal improvement & HDR & other things...)
Add Granular Volume Steps (thanks to @genesisalgor for the suggestion)
Improved ViPER4Android Compatibility
Fixed an issue with android beam image transfering
UI improvements
Fix derp: YouTube full screen (via browser, broken vp9 was mistakenly re-added on previous build)
some small other things
Build madOS [7.1.2] 20170819 ( Stable 13)
Patch Level: August 2017
Kernel version 3.10.107
Wifi improvements
Fixed substratum issues
New feature for showing charging current & voltage on lockscreen
Added F2FS support
Reworked MTK RIL implementation
Some more improvements
Yeah! There it is
The M.A.D. Team
Thanks, thanks, very thanks!!!!!
well done M.A.D very good for first realease
there are some problem that i am sure that our best team will solve them
my feedbacks
browser dont work
when i go to development option settings crashed
i cant connect to data but 3g signal reception is very very good but not 4g for me maybe if i had band mode can activate it
THANKS FOR YOUR WORK
Let me just say this is an ALPHA (advanced alpha)
Not for daily use, but for test purposes..
The 6752 will be hopefully in the same state as the aosp N for the plus variant soon
Maybe if I have time I'll release alpha 2 tomorrow with couple things fixed
Cheers
Will there be an AICP, too?
Sent by my NOKIA 5210™
This is wonderful, keep up the good work
Sent from my s3
MAD about getting the freshest ROMs.
zed-78 said:
Will there be an AICP, too?
Sent by my NOKIA 5210™
Click to expand...
Click to collapse
There's no even N Aicp yet [emoji14]
And wow, almost everything was fixed on Plus variant, that is impressively fast. Know our will receive it soon.
Well @superdragonpt I had to do a big "gambiarra" to test it without USB port, but managed haha [emoji14]
Enviado de meu S3 usando Tapatalk
Another bug I don't know if I am only me that have it. I have good signal I can make calls but I can't receive calls
Damn MAD Team, i was so happy with Aicp11v2 until you announced N for mtk6752. I had absolutely no problems with Aicp, even the modem is the best one i ever had on S3. I deactivate every frequencies with the help of the site http://willmyphonework.net/ , posted by a user here in forum.
Un-f-u-c-k-in-believable.
Just don't abandon MM like it was with LP. :good:
N looks nice. I know its an advanced alpha, bu i post the bugs i found in my short testing, hope that is appreciated by devs:
- twrp3.0.2 from Derteufel gives 2 unknown command error but installed anyway
- Google play services keeps on crashing (gapps related)
- Setup assistant keeps on crashing (maybe gapps related too)
- could not connect to wifi with wpa enterprise encryption; i entered username and password but the connect button remains grey (unhitable)
g.andi said:
N looks nice. I know its an advanced alpha, bu i post the bugs i found in my short testing, hope that is appreciated by devs:
- twrp3.0.2 from Derteufel gives 2 unknown command error but installed anyway
- Google play services keeps on crashing (gapps related)
- Setup assistant keeps on crashing (maybe gapps related too)
- could not connect to wifi with wpa enterprise encryption; i entered username and password but the connect button remains grey (unhitable)
Click to expand...
Click to collapse
Twrp errors are warnings, ROM still installs fine
GAPPS N are still in beta, they do make several crash's, it's an general known bug
Thanks for feedback
Cheers
@superdragonpt dear dev I install the rom without gapps I find that problems
1 no data
2 no 4g (second sim)
3 canj acess dev options (settings crashed)
4 cant receive calls
5 when make call cant activate heardphone
6 browser dont work
7 musib crashed
8 on soft buttons lights
That's I don't remember if I had over issues thanks
MAD
This work is sensational. I never thought I could have Nougat in my Jiayu S3. Thank you for this version and the Alpha Beta next and perhaps final and stable version someday
Had a wifi connection but could not go on opening account.
It looks like that it was not possible to make a connection
genesisalgor said:
There's no even N Aicp yet [emoji14]
And wow, almost everything was fixed on Plus variant, that is impressively fast. Know our will receive it soon.
Well @superdragonpt I had to do a big "gambiarra" to test it without USB port, but managed haha [emoji14]
Enviado de meu S3 usando Tapatalk
Click to expand...
Click to collapse
I prefer cm14, this released more earlier?
But icp too hahaha
Enviado desde mi s3 mediante Tapatalk
Hi guys,
I'm building an extra lean LineageOS 14.1 ROM for oneplus3/3T with a few added features. A lot of packages have been stripped down, only the bare minimum is built to provide a fast and stable ROM. That gives you much more freedom as you can install exactly what you really want from the Playstore. You can install most of the missing packages manually, they are available in a flashable zip on the server (see second post).
My approach for DARK ROM 14.1 is to add as many Pixel features as possible while keeping a solid LineageOS base.
Key features
- Full OMS support (rootless)
- Signature spoofing support
- Pixel Launcher (with the provided GAPPS package)
- Pixel animated navbar (with on/off switch)
- Pixel sounds
- Pixel accent colors
- Pixel bootanimation with sound
- Rounded icons
- Google Assistant
- Night Light
- Night Light Brightness
- Choose between dialer and voice assistant in lockscreen
- Hide next alarm from expanded status bar and lockscreen
- Disable the boot animation sound
- Secure lockscreen (disables status bar pull down, quick settings tiles, power button and lockscreen shortcuts)
- Double tap the lock icon on the lockscreen to sleep
- Longpress power button while screen off to trigger flashlight
- Hide bluetooth icon when disconnected
- Volume steps
- Quick unlock pin/password
- Remove album art from lockscreen
- Date in status bar
- Battery bar
- Custom headers
- Smart pulldown
- Volume button controls media volume anywhere
- Change navbar height
- Screenshot tile
- Caffeine tile
- Sync tile
- Reboot/recovery tile
- Music tile
- USB Tethering tile
- NFC tile
- Quick settings custom rows/columns
- Turn on/off mobile data with single click on collapsed quick settings
- Status bar ticker
- Separate ring and notification volume
- Specific color for 100% charged battery
- Prevent accidental wakeup
- Remove settings suggestions
- Show WiFi SSID in status bar
- Show carrier label in status bar
- Hide carrier label when WiFi SSID is showing
- Hide carrier label on the lockscreen (or rename to whatever you want)
- Hide the low battery warning notification
- Remove the orange status bar and navigation bar when in battery saver mode
- One hand mode
- Choose doze brightness
- Adjust animation scale precisely with a slider
- Dynamic nav bar color (changes color to the same of status bar)
- In-call vibration options (on connect, on call waiting and on disconnect)
Screenshots
SafetyNet
The ROM is already designed to pass SafetyNet out of the box. No need to lock the bootloader (which I advise you to do ONLY on a pure factory image install) because the kernel has the patch for it. If you want root, you'll need to install Magisk, which comes pre-rooted. Then, enable Magisk Hide in Magisk Manager, hard reboot and you should be good to go. Also, do not enable busybox in Magisk Manager, that will cause you to randomly lose root. You'll get all you need to know on the Magisk thread.
ViPER4Android/ViPER4Arise
The ROM is designed to work with both ViPER4Android and ViPER4Arise out of the box without the need for SuperSU or any Magisk module. The SEPolicy already contains the necessary permissions for them to work even in Enforcing. All you need to do is flash the package of your choice.
Installation
Please refer to the official LineageOS thread for recovery or other device specific images.
If coming from any other ROM
- Backup first... always backup first
- Wipe system, data, cache and dalvik cache
- Install DARK ROM
- Install provided GAPPS (mandatory)
- Install root package of your choice (I recommend Magisk)
Enjoy !
If coming from a previous build of mine
- Backup (you know it)
- Dirty flash DARK ROM
- Install root package of your choice
Enjoy! (if anything goes wrong, clean flash)
Download
To download the whole ROM
Oneplus3/3T
To download GAPPS and Extras
Extras
To download delta updates
Go to Settings/About phone/System updates and use the OpenDelta app to automatically download delta updates.
Delta Updates
Here are a few explanations on how to use delta updates. First, you will need to keep the first full build you downloaded on your sdcard (any full build that have NIGHTLY in the filename will do). I recommend that you keep it on the root of your sdcard until you flash a new build with the OpenDelta app. After that, the OpenDelta app will automatically place a new flashable zip inside the OpenDelta folder that will be used for the next delta updates. At that point you can delete the build on the root of your sdcard, but you will need to keep the (latest) file in the OpenDelta folder at all times to keep the delta updates working.
You will also notice a folder named FlashAfterUpdate in the OpenDelta folder. As its name suggests, any flashable zip files that you put in this folder will be flashed automatically after the update. I recommend that you put all your extra flashable zips there, cause if you use the app to auto-flash the latest build, it will reboot automatically after updating, which means you won't have the opportunity to manually flash other zips. If you want root to survive, you need to put your root package there.
Translations
If you want to help translate the ROM in your language, here are my Crowdin projects. Let me know if you want me to add another language.
SystemUI
Settings
CMParts
Donations
Please consider a donation if you like my work ! I spend a lot of time and effort working on this, so if you can spare a few bucks, please buy me a beer (so I can relax when I'm stuck on a stubborn bug) or a coffee (so I can work on it later in the night). If you decide to do so, I'll gladly add you to the Donation Hall of Fame (see second post)
Source code
GitHub
Thanks and credit
LineageOS
All the good devs who contributed to the features I added
Donation Hall of Fame
- alsheron X2 !!!
- cryu1
- OldoTRONic X2 !!!
- Cissmayazz
- twili9ht
- krombopulos X2 !!!
- squandry
- zerand
- strangethings
- jerunk
- hurricurry
- Sui77
- mistersixt
- gillboyzz
- vurey
- jstargz
- the_house
- WSeb
- hawgguy
- spibbs
- ProBird79
- focus-pocus
- CyberpodS2 X2 !!!
- herbie13 X2 !!!
- atharwaqas
- BoozYooNit X2 !!!
- NJD316
- velvel
- ChrisPadduDubbu X2 !!!
- mrtsunami92
- caballon
- deafbum
Many thanks to those generous donors !!! They make DARK ROM possible.
Extra Packages
On the server you will find a file named ExtraPackages_date.zip which contains a few apps that are not available out of the box in my builds (see list). You won't have to flash it every update, since there is a survival script. I suggest you open the zip and remove the files you don't need before flashing it the first time.
Here is what's included:
- Calendar (AOSP Calendar)
- Contacts (AOSP Contacts)
- DeskClock (AOSP Clock)
- Dialer (AOSP Dialer)
- Eleven (LOS Music player)
- ExactCalculator (LOS Calculator)
- Gallery2 (AOSP Photos)
- Jelly (LOS Browser)
- LatinIME (AOSP Keyboard)
- Messaging (AOSP SMS)
- Recorder (LOS Recorder)
- Snap (LOS Camera)
- Stk (AOSP SIM card toolkit)
- Trebuchet (LOS Launcher)
Note that if you install my GAPPS and the complete Extra packages, you'll end up with two Phone app and two Contacts apps. Simply delete the GoogleContacts and GoogleDialer in the system/priv-app and reboot. If you choose to use the AOSP Dialer instead of Google Dialer, you'll need to go to Settings/Apps/Gear Icon (top right) and choose the AOSP Dialer as default phone app, otherwise you won't be able to make calls.
Thanks! I will try
I've ran your ROM on my Nexus 6P, was awesome! Best rom for the 6P I'm sure it will fair very well here as well! As for now tho I'm leaving my 3T in touched but interested to see what others think of your ROM.
Was this just ported from the 6P then??
Alex1188 said:
I've ran your ROM on my Nexus 6P, was awesome! Best rom for the 6P I'm sure it will fair very well here as well! As for now tho I'm leaving my 3T in touched but interested to see what others think of your ROM.
Was this just ported from the 6P then??
Click to expand...
Click to collapse
Yes, it's the exact same ROM as the 6P
Looks Nice.. will try
Hey! Your ROM was the daily driver on my Nexus 5 till a few months back! I used the CAF version and that rocked. Hope to see the same stability and battery life increases here too! All the best @Dark_Eyes_!
Looks promising! ?
Nice to see you here mate.!!
Just flashed this ROM, seriously this thing is stable as f***!
@Dark_Eyes_ the only bug I found is the inability to enable the on-screen navigation bar. The toggles itself works and the hardware keys gets disabled, but the navigation bar never comes up. Nothing is recorded in the logcat that would be useful to debug this problem.
HAL1 or HAL3 ? in this ROM
Want to know if i'll be able to use google camera or the Nexus CameraNX mod in this ROM.
Is it only me facing network drop issues and heating even with light usage and one last thing camera takes way more time for focusing
really loving rom so far but no nav bar it shows up
Going to give this a go. Looks awesome. Good work.
Plz make for oneplus 3
Cybertron™ said:
Plz make for oneplus 3
Click to expand...
Click to collapse
It is for OP3 as for OP3T...it's in cross development section
Amazing
kentexcitebot said:
Just flashed this ROM, seriously this thing is stable as f***!
@Dark_Eyes_ the only bug I found is the inability to enable the on-screen navigation bar. The toggles itself works and the hardware keys gets disabled, but the navigation bar never comes up. Nothing is recorded in the logcat that would be useful to debug this problem.
Click to expand...
Click to collapse
I knew about the nav bar, but I was hoping that a logcat would tell me where to start looking. OP3 is the only device I support that have hardware keys. Is it working fine in the official LineageOS builds?
subashchandran said:
HAL1 or HAL3 ? in this ROM
Want to know if i'll be able to use google camera or the Nexus CameraNX mod in this ROM.
Click to expand...
Click to collapse
As of now Google camera doesn't work, but I saw that LineageOS have some commits pending to enable HAL3. I won't be fooling around on this, since I don't own the device, and I'll merge whatever LineageOS merges.
Bootanimation is not in pixel, still looks like in cyanogenmod
New build is up!
Guys,
I just released a new build with a few fixes. On-screen navbar should be fixed and the bootanimation should be pixel now. I also merged all the latest updates from LineageOS. Delta updates should be up, please report how it goes.
Hope everything is fine now! Please give feedback
Enjoy!
Hi guys,
I'm building an extra lean LineageOS 14.1 ROM for bullhead with a few added features. A lot of packages have been stripped down, only the bare minimum is built to provide a fast and stable ROM. That gives you much more freedom as you can install exactly what you really want from the Playstore. You can install most of the missing packages manually, they are available in a flashable zip on the server (see second post).
My approach for DARK ROM 14.1 is to add as many Pixel features as possible while keeping a solid LineageOS base.
Key features
- Full OMS support (rootless)
- Signature spoofing support
- Pixel Launcher (with the provided GAPPS package)
- Pixel animated navbar (with on/off switch)
- Pixel sounds
- Pixel accent colors
- Pixel bootanimation with sound
- Rounded icons
- Google Assistant
- Night Light
- Night Light Brightness
- Choose between dialer and voice assistant in lockscreen
- Hide next alarm from expanded status bar and lockscreen
- Disable the boot animation sound
- Secure lockscreen (disables status bar pull down, quick settings tiles, power button and lockscreen shortcuts)
- Double tap the lock icon on the lockscreen to sleep
- Longpress power button while screen off to trigger flashlight
- Hide bluetooth icon when disconnected
- Volume steps
- Quick unlock pin/password
- Remove album art from lockscreen
- Date in status bar
- Battery bar
- Custom headers
- Smart pulldown
- Volume button controls media volume anywhere
- Change navbar height
- Screenshot tile
- Caffeine tile
- Sync tile
- Reboot/recovery tile
- Music tile
- USB Tethering tile
- NFC tile
- Quick settings custom rows/columns
- Turn on/off mobile data with single click on collapsed quick settings
- Status bar ticker
- Separate ring and notification volume
- Specific color for 100% charged battery
- Prevent accidental wakeup
- Remove settings suggestions
- Show WiFi SSID in status bar
- Show carrier label in status bar
- Hide carrier label when WiFi SSID is showing
- Hide carrier label on the lockscreen (or rename to whatever you want)
- Hide the low battery warning notification
- Remove the orange status bar and navigation bar when in battery saver mode
- One hand mode
- Choose doze brightness
- Adjust animation scale precisely with a slider
- Dynamic nav bar color (changes color to the same of status bar)
- In-call vibration options (on connect, on call waiting and on disconnect)
Screenshots
SafetyNet
The ROM is already designed to pass SafetyNet out of the box. No need to lock the bootloader (which I advise you to do ONLY on a pure factory image install) because the kernel has the patch for it. If you want root, you'll need to install Magisk, which comes pre-rooted. Then, enable Magisk Hide in Magisk Manager, hard reboot and you should be good to go. Also, do not enable busybox in Magisk Manager, that will cause you to randomly lose root. You'll get all you need to know on the Magisk thread.
ViPER4Android/ViPER4Arise
The ROM is designed to work with both ViPER4Android and ViPER4Arise out of the box without the need for SuperSU or any Magisk module. The SEPolicy already contains the necessary permissions for them to work even in Enforcing. All you need to do is flash the package of your choice.
Installation
Please refer to the official LineageOS thread for recovery or other device specific images (radio, bootloader, vendor).
If coming from any other ROM
- Backup first... always backup first
- Wipe system, data, cache and dalvik cache
- Install DARK ROM
- Install provided GAPPS (mandatory)
- Install root package of your choice (I recommend Magisk)
Enjoy !
If coming from a previous build of mine
- Backup (you know it)
- Dirty flash DARK ROM
- Install root package of your choice
Enjoy! (if anything goes wrong, clean flash)
Download
To download the whole ROM
Bullhead
To download GAPPS and Extras
Extras
To download delta updates
Go to Settings/About phone/System updates and use the OpenDelta app to automatically download delta updates.
Delta Updates
Here are a few explanations on how to use delta updates. First, you will need to keep the first full build you downloaded on your sdcard (any full build that have NIGHTLY in the filename will do). I recommend that you keep it on the root of your sdcard until you flash a new build with the OpenDelta app. After that, the OpenDelta app will automatically place a new flashable zip inside the OpenDelta folder that will be used for the next delta updates. At that point you can delete the build on the root of your sdcard, but you will need to keep the (latest) file in the OpenDelta folder at all times to keep the delta updates working.
You will also notice a folder named FlashAfterUpdate in the OpenDelta folder. As its name suggests, any flashable zip files that you put in this folder will be flashed automatically after the update. I recommend that you put all your extra flashable zips there, cause if you use the app to auto-flash the latest build, it will reboot automatically after updating, which means you won't have the opportunity to manually flash other zips. If you want root to survive, you need to put your root package there.
Translations
If you want to help translate the ROM in your language, here are my Crowdin projects. Let me know if you want me to add another language.
SystemUI
Settings
CMParts
Donations
Please consider a donation if you like my work ! I spend a lot of time and effort working on this, so if you can spare a few bucks, please buy me a beer (so I can relax when I'm stuck on a stubborn bug) or a coffee (so I can work on it later in the night). If you decide to do so, I'll gladly add you to the Donation Hall of Fame (see second post)
Source code
GitHub
Thanks and credit
LineageOS
All the good devs who contributed to the features I added
Donation Hall of Fame
- alsheron X2 !!!
- cryu1
- OldoTRONic X2 !!!
- Cissmayazz
- twili9ht
- krombopulos X2 !!!
- squandry
- zerand
- strangethings
- jerunk
- hurricurry
- Sui77
- mistersixt
- gillboyzz
- vurey
- jstargz
- the_house
- WSeb
- hawgguy
- spibbs
- ProBird79
- focus-pocus
- CyberpodS2 X2 !!!
- herbie13 X2 !!!
- atharwaqas
- BoozYooNit X2 !!!
- NJD316
- velvel
- ChrisPadduDubbu X2 !!!
- mrtsunami92
- caballon
- deafbum
Many thanks to those generous donors !!! They make DARK ROM possible.
Extra Packages
On the server you will find a file named ExtraPackages_date.zip which contains a few apps that are not available out of the box in my builds (see list). You won't have to flash it every update, since there is a survival script. I suggest you open the zip and remove the files you don't need before flashing it the first time.
Here is what's included:
- Calendar (AOSP Calendar)
- Contacts (AOSP Contacts)
- DeskClock (AOSP Clock)
- Dialer (AOSP Dialer)
- Eleven (LOS Music player)
- ExactCalculator (LOS Calculator)
- Gallery2 (AOSP Photos)
- Jelly (LOS Browser)
- LatinIME (AOSP Keyboard)
- Messaging (AOSP SMS)
- Recorder (LOS Recorder)
- Snap (LOS Camera)
- Stk (AOSP SIM card toolkit)
- Trebuchet (LOS Launcher)
Note that if you install my GAPPS and the complete Extra packages, you'll end up with two Phone app and two Contacts apps. Simply delete the GoogleContacts and GoogleDialer in the system/priv-app and reboot. If you choose to use the AOSP Dialer instead of Google Dialer, you'll need to go to Settings/Apps/Gear Icon (top right) and choose the AOSP Dialer as default phone app, otherwise you won't be able to make calls.
Downloading now, looking forward to trying this rom out. Lots of awesome features up there!
Ok, first ROM in a while thst I would like to try. The feature list looks very well designed and thought about. Thank You
Thx for the new rom
Thanks Dark_Eyes_ I've been missing this ROM since upgrading from Nexus 5 to 5x. It's working well so far. Awesome work ?
Woooow thanks ....??
Sent from my Nexus 5X using XDA-Developers Legacy app
Hi, when using settings-display-color calibration I get a 'lineage os system error ' . No other issues found so far. Anyone else get this? Cheers.
EDIT: Im set to English UK btw.
herbie13 said:
Hi, when using settings-display-color calibration I get a 'lineage os system error ' . No other issues found so far. Anyone else get this? Cheers.
EDIT: Im set to English UK btw.
Click to expand...
Click to collapse
Thanks for reporting. I already found the solution, it will be fixed in the next update. For the time being simply switch to English (US), edit the color calibration and switch back to your desired language. Cheers!
Hi Dark_Eyes_ I'm really finding the new 7.1.2 feature allowing a swipe down on the fingerprint sensor when unlocked to access pulldown notifications really useful. I see that there are a few apps out there that can enhance its use but all seem to have their probs . Is this something you can play with ? I can think of all sorts of uses but a first would be a tap of the fingerprint sensor to switch off screen when on. Cheers
herbie13 said:
Hi Dark_Eyes_ I'm really finding the new 7.1.2 feature allowing a swipe down on the fingerprint sensor when unlocked to access pulldown notifications really useful. I see that there are a few apps out there that can enhance its use but all seem to have their probs . Is this something you can play with ? I can think of all sorts of uses but a first would be a tap of the fingerprint sensor to switch off screen when on. Cheers
Click to expand...
Click to collapse
There's an app for that
Sent from my Nexus 5X using Tapatalk
herbie13 said:
Hi Dark_Eyes_ I'm really finding the new 7.1.2 feature allowing a swipe down on the fingerprint sensor when unlocked to access pulldown notifications really useful. I see that there are a few apps out there that can enhance its use but all seem to have their probs . Is this something you can play with ? I can think of all sorts of uses but a first would be a tap of the fingerprint sensor to switch off screen when on. Cheers
Click to expand...
Click to collapse
Also maybe to keep screen on while finger on sensor.
Sent from my Bullhead using Tapatalk
iamterence said:
There's an app for that
Click to expand...
Click to collapse
Hi, I have tried a few with not much success. Can you recommend a good one that works well on the 5x ? Thanks
This ROM is awesome! Android Pay works, which is awesome, because I struggled getting Magisk to work on stock rom. I've been staying away from ROMs for a while now, but when I saw your feature list, I couldn't help but try. Really glad I did!
Thanks for the rom...!!
Sent from my Nexus 5X using XDA-Developers Legacy app
@Dark_Eyes_ glad to see you in Bullhead branch. I was so much enjoying Bliss roms until my Hammerhead's wifi chip decided to fail only 2 weeks after warranty expired. The cost of replacement of whole logic board was the same as buying the new 5X at that time 2 years on market already.
Sent from my Bullhead using Tapatalk
Flashed it yesterday and haven't had any issue. Thanks for the ROM. Hope you keep up the good work.
Im on the PixelROM for some quite time. It was so far the easiest hassle free choice for me with so little free time. Installer all in one all together with bootloders and radios all up to date. Bliss was kind of very slow with development lately for this device. I would like to try this ROM cuz I had good memories of @Dark_Eyes_
A few questions though...
1. Compatible with cf SuperSu?
2. How about Open Aroma GApps?
3. What about other custom kernels according to SafetyNet?
Thanks for this ROM
jugoslavpetrovic said:
Im on the PixelROM for some quite time. It was so far the easiest hassle free choice for me with so little free time. Installer all in one all together with bootloders and radios all up to date. Bliss was kind of very slow with development lately for this device. I would like to try this ROM cuz I had good memories of @Dark_Eyes_
A few questions though...
1. Compatible with cf SuperSu?
2. How about Open Aroma GApps?
3. What about other custom kernels according to SafetyNet?
Thanks for this ROM
Click to expand...
Click to collapse
1. Yes, but it might not pass SafetyNet
2. Yes, but you'll need to install at least Google dialer, Google keyboard and pixel launcher.
3. Other kernels might or might not pass SafetyNet. It's most likely up to them, but usually using Magisk will make them work. You might need the beta v13 though.
Dark_Eyes_ said:
1. Yes, but it might not pass SafetyNet
2. Yes, but you'll need to install at least Google dialer, Google keyboard and pixel launcher.
3. Other kernels might or might not pass SafetyNet. It's most likely up to them, but usually using Magisk will make them work. You might need the beta v13 though.
Click to expand...
Click to collapse
Thanks.
SafetyNet is not my priority, never ever played pokemon go or was paying via NFC since Android Pay is not yet supported in my country, I look more to stability and better (less) battety drain, but thanks for clearifying.
Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
About Project
Reloaded-CAF is a Custom ROM which is based on CAF. The main aim of this ROM is to bring stock AOSP experience as much as possible while maintaining performance, smoothness and good battery backup. I hope that you'll all love this project, and help us, shape it even better. Meanwhile, all of our sources are publicly available on our Github. Hope you enjoy your stay and like our work on Reloaded-CAF. We did add some features to improve the overall experience.
What's CAF?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN, and Linux-MSM. Code Aurora is basically AOSP + Qualcomm specific enhancements and optimization.
Features:
* Buttons
Enable/disable navbar
Invert navbar keys
Volume key wake
Volume key music control
* Status bar
Battery style options
Clock customizations
4G/LTE toggle
VoLTE icon toggle
Quick pulldown
Network Traffic Indicator
QS row/column settings
* Lights
Battery lights/Notification lights toggle
LED pulse when battery low toggle
* Display
System-wide dark mode
Accents color options
Proximity check on wake
Double tap to sleep on statusbar and lockscreen
* Sound and vibration
In-call vibration options
Ringtone chooser for 2nd sim card
Fingerprint authentication vibration
Screenshot sound toggle
Toggle for silent notifications while screen on
* Security
Advanced Reboot menu
AppOps
* Lockscreen
Disable qs on secure lock screen
Pin quick unlock
Auto Face unlock
Charging info
* QS Tiles
Power
Sync
Heads up
Caffeine
Screenshot
* Gestures
3 Finger swipe for screenshot
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte.
Known issues:
You tell me
Instructions :
Download the latest build and GApps
Reboot to recovery and wipe system, data, cache, dalvik
Flash Pie vendor and Firmware, if you are on oreo vendor
Flash the latest build and Gapps
Flash magisk, if you want root access (optional)
Reboot
Downloads :
Reloaded-CAF: CLICK HERE
OpenGapps [arm64/9.0]: CLICK HERE
Telegram Groups:
Reloaded Telegram Group
Redmi Note 6 Pro Telegram Group
Redmi Note 6 Pro Telegram Channel
FAQ
Why is the security patch older than the latest AOSP patch?
CAF focus on delivering the latest hardware patches and are usually about a month behind Google on security patches, on the other hand, Google is usually a month or more behind on them on caf patches (sometimes months). No point in complaining about it, if you want the latest security patch, go with an AOSP based rom (like LineageOS), if you want latest Qualcomm optimizations for our hardware as well as fixes, go with caf, it's as simple as that.
Kernel Source: HERE
Device Source: HERE
And huge thanks to @fernandÃOdj for testing
XDA:DevDB Information
Reloaded-CAF, ROM for the Xiaomi Redmi Note 6 Pro
Contributors
@Pavanpatel @riteshsaxena @blackman01 @rama982
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Pie
Based On: CAF
Version Information
Status: Initial Release
Release Date: 2019-05-31
Created 2019-05-31
Last Updated 2019-09-31
Build Date 31-5-2019:
• Initial Build
Some Screenshots:
Perfect rom. You must try. Perfect, nice, good ROM perfect perfect perfect. I liked.
---------- Post added at 10:05 PM ---------- Previous post was at 10:05 PM ----------
please come on
Battery usage not wiping!!
Which camera is this rom using? Thanks!
Cioffaz said:
Which camera is this rom using? Thanks!
Click to expand...
Click to collapse
Looks a lot like Gcam, really simple camera with few options.
deathhall said:
Looks a lot like Gcam, really simple camera with few options.
Click to expand...
Click to collapse
I've read in many posts and telegram group that activating gcam is a bit tricky on tulip. Can anyone confirm that the camera (gcam) is working fine?
It also seems to me from the screens that there are two cameras...am i wrong about it?
Many thanks!
Cioffaz said:
I've read in many posts and telegram group that activating gcam is a bit tricky on tulip. Can anyone confirm that the camera (gcam) is working fine?
It also seems to me from the screens that there are two cameras...am i wrong about it?
Many thanks!
Click to expand...
Click to collapse
Besides chrome, these are the default apps that was with the latest ROM and gapps (nano). The camera is the first screenshot in the 2nd post, the one in the second to last screenshot wasn't included in the ROM. The apk just lists it as com.android.camera2
Really good rom, been using reloaded for 2 days now. And i think I'll use this as mu daily rom.
Anyway, i hope reloaded development for tulip will continued just like other rom
How abt the battery backup how many hours of sot can expect from this rom
galileogarin said:
Really good rom, been using reloaded for 2 days now. And i think I'll use this as mu daily rom.
Anyway, i hope reloaded development for tulip will continued just like other rom
Click to expand...
Click to collapse
It's getting continued till the time i own this device so don't worry we have a long journey to cover.
[email protected] said:
How abt the battery backup how many hours of sot can expect from this rom
Click to expand...
Click to collapse
It's totally upon your usage. So it's better try out yourself and let us know as well.
My new daily driver. Perfect rom, thank you!
Which Gcam is best suitable for this ROM? And what recovery should I use?
best rom i.ve tried
nullspirit said:
Which Gcam is best suitable for this ROM? And what recovery should I use?
Click to expand...
Click to collapse
Use latest unofficial twrp by @rama982
https://t.me/tulip_updates/1014
Pavanpatel said:
It's getting continued till the time i own this device so don't worry we have a long journey to cover.
Click to expand...
Click to collapse
Whoa dude, Nice to hear that. ??
A new build is available for download.
Build Date: 18-06-2019
Changelogs:
• An improved theme engine with a lot of new accents colors and a black theme.
• A new and improved launcher with google feed integration, icon pack support, icon size customization, gestures support, etc.
• Added support for microg.
• Fixed booting with Encryption.
• June security patch merged.
• Updated ANT+ vendor blobs from lavender
• Added boosted frameworks
• Update mlipay blobs to 1.1
• Drop mi sound enchancer
• Maybe something more
Download: FROM HERE
Please support me by donating: Paypal
Join the team: Click Here
Enjoy.
Double tap to wake doesn't work on the latest build.
Anyone facing same issue?
crDroid+ v7.13 for OnePlus 7t "hotdogb"
Preamble
I always preferred Cyanogen/LineageOS based ROMs over dozens of AOSP forks floating around and managed by unknown individual hobbyist developers since Lineage has some foundation and core development behind it at least.
But just plain Lineage is too flat in terms of features I would like to have and unfortunately there are almost no forks I am aware of except great crDroid ROM.
crDroid itself has almost everything I need but some little nifty features which make daily life even better.
So that's my daily driver ROM I decided to share with the community, crDroid packed with additional features.
Let's call it crDroid+
Features
===== 30 September, 2021
- WiFi & Bluetooth timeout settings
- Dialer revamed to look like OOS
====== 06.09.21 build:
* Alarm & Wakelock Blockers
* Extended Navigation Gestures
* Classical AppOps backported to Android R
* Colored status bar icons
* Double Tap to trigger doze screen
* ForceDark blacklist (exclude specific apps from being "forcibly darken" if you have this setting enabled)
* Vibration patterns from OOS
* Recents: add kill action button to app shortcuts popup
* Fluid v2 & ShapeShift Android 12 locksreen clocks
* OOS icons & sounds
* Correct device model number detection (by default it's hardcoded to HD1905)
* ..and several minor fixes
Installation
It's the same as for original crDroid (perhaps LineageOS guide will work too)
The ROM has no gapps bundled so you have to install gapps of your choice (im using NikGapps) or microG (original crDroid has signature spoofing so it should work as well)
Downloads
Sourceforge
Sources
ROM: https://github.com/crdroidandroid
Kernel: kernel Source
Issues
Perhaps the same as for original crDroid but I'm not aware of any atm
Kudos
crDroid & LineageOS maintainers, The Community, contributors & patches authors
reserved
Thanks Bro.
I'm on HD1905 (originally global rom but now on Lineage)
Is the mic working on this rom for calls? It doesn't work for me on Lineage.
xdabushrang3r said:
I'm on HD1905 (originally global rom but now on Lineage)
Is the mic working on this rom for calls? It doesn't work for me on Lineage.
Click to expand...
Click to collapse
I'm on HD1903 and mic is OK. Can't say anything about 1905 but there's a chance it does not since crDroid itself is Lineage based ROM. Device tree used for building is a bit different though.
faust93 said:
I'm on HD1903 and mic is OK. Can't say anything about 1905 but there's a chance it does not since crDroid itself is Lineage based ROM. Device tree used for building is a bit different though.
Click to expand...
Click to collapse
Thanks mate.
I'll try it out
faust93 said:
crDroid+ v7.9 for OnePlus 7t "hotdogb"
Click to expand...
Click to collapse
Hi Bro,
First of all thank you for sharing such amazing work with US. Further just observed appended issues,
1- Finger Print did not working properly (Tested with all color overlays)
2- Dual Sim did not working on T mobile and maybe you need to add the DSDS fix to get it working
3- Further will report if observed
Except above ROM is working fine and Micro G as well.
Just signed in After years on XDA just because of this reply
Stay Safe & Blessed
Edit: @faust93 just test an build crdroid build having dual Sim fix for t mobile variant finger print also working, so please rebuild if you have time.
Thanks to @mukesh22584 for his great help and support in adding dual Sim fix in official crdroid for us.
Downloaded the dec release, tried to installed, got an interesting error from recovery.
"Package is for product Oneplus7t but expected hotdogb."
Isn't the oneplus 7t's codename hotdogb?
Update:
Installed the latest Lineage recovery, rather than the one in the directions, and was able to get the rom to install.
Is there a way to reduce the minimum volume during calls with this rom? I have my volume set to the lowest level, but I can't hold my phone against my head because the speaker is too loud.
I have tried enabling/disabling the speakerphone and adjusting the volume slider with no change on the minimum volume output of a regular call.
faust93 said:
crDroid+ v7.11 for OnePlus 7t "hotdogb"
So that's my daily driver ROM I decided to share with the community, crDroid packed with additional features.
Let's call it crDroid+
Features
===== 30 September, 2021
- WiFi & Bluetooth timeout settings
- Dialer revamed to look like OOS
====== 06.09.21 build:
* Alarm & Wakelock Blockers
* Extended Navigation Gestures
* Classical AppOps backported to Android R
* Colored status bar icons
* Double Tap to trigger doze screen
* ForceDark blacklist (exclude specific apps from being "forcibly darken" if you have this setting enabled)
* Vibration patterns from OOS
* Recents: add kill action button to app shortcuts popup
* Fluid v2 & ShapeShift Android 12 locksreen clocks
* OOS icons & sounds
* Correct device model number detection (by default it's hardcoded to HD1905)
* ..and several minor fixes
Click to expand...
Click to collapse
thanks for updating. you just change features and dont add gapps yes? so its basicly the same like official?
wizardknight said:
Is there a way to reduce the minimum volume during calls with this rom? I have my volume set to the lowest level, but I can't hold my phone against my head because the speaker is too loud.
I have tried enabling/disabling the speakerphone and adjusting the volume slider with no change on the minimum volume output of a regular call.
Click to expand...
Click to collapse
Hmm, that's weird. Have no such problem. Do you have any audio mods installed like viper etc? Also check default audiofx/moto audio settings, may be they affect somehow..
pxrave said:
thanks for updating. you just change features and dont add gapps yes? so its basicly the same like official?
Click to expand...
Click to collapse
Exactly, same code base/device trees + additional features and no gapps.
faust93 said:
Hmm, that's weird. Have no such problem. Do you have any audio mods installed like viper etc? Also check default audiofx/moto audio settings, may be they affect somehow..
Click to expand...
Click to collapse
Nope. Clean install. Nothing installed at all other than gapps and root, and call volume set to the lowest level is easily what I would expect at mid to high levels on any device. I want to turn down the volume, but can't as I am already at the lowest setting.
My mother called me this afternoon and I had to hold the phone 5" away from my head during the entire call because of how loud it was.
I've been trying to find a way to edit the /vendor/ect/mixer_paths files in hopes I can reduce the call gain, but every time I make a change the file size drops to 0. After that the system will no longer reboot, and I have to do a clean install.
wizardknight said:
Nope. Clean install. Nothing installed at all other than gapps and root, and call volume set to the lowest level is easily what I would expect at mid to high levels on any device. I want to turn down the volume, but can't as I am already at the lowest setting.
My mother called me this afternoon and I had to hold the phone 5" away from my head during the entire call because of how loud it was.
I've been trying to find a way to edit the /vendor/ect/mixer_paths files in hopes I can reduce the call gain, but every time I make a change the file size drops to 0. After that the system will no longer reboot, and I have to do a clean install.
Click to expand...
Click to collapse
So you mean in-call volume does not work at all or the lowest is too loud still? Check "crDroid Settings->Sound->Volume steps" and try to adjust Voice Call item.
faust93 said:
So you mean in-call volume does not work at all or the lowest is too loud still? Check "crDroid Settings->Sound->Volume steps" and try to adjust Voice Call item.
Click to expand...
Click to collapse
The incall volume, at the lowest level, is like having the speakerphone turned on. I can set the phone down and clearly hear what is being said. At the lowest level is is too way loud.
I have already been able to increase the number of volume steps, unfortunately it doesn't reduce the volume level of the lowest step. Or if it is reducing the volume level is is by a trivial amount.
@faust93
Any chance you could build an update that includes this patch for the brightness? It looks like it would really smooth out the brightness ramp curve.
https://review.lineageos.org/c/LineageOS/android_device_xiaomi_beryllium/+/320942/
wizardknight said:
@faust93
Any chance you could build an update that includes this patch for the brightness? It looks like it would really smooth out the brightness ramp curve.
https://review.lineageos.org/c/LineageOS/android_device_xiaomi_beryllium/+/320942/
Click to expand...
Click to collapse
Hi. Though it's for different device I have applied the patch in 220109 build. But it did not make things much better IMHO...
faust93 said:
Hi. Though it's for different device I have applied the patch in 220109 build. But it did not make things much better IMHO...
Click to expand...
Click to collapse
That's too bad. Thanks for giving it a shot.
Anything else interesting in the new build?
Is there some changelog for latest builds?
pxrave said:
Is there some changelog for latest builds?
Click to expand...
Click to collapse
EDIT: WRONG DEVICE
crDroid 8.0 - OFFICIAL | Android 12.
Updated: 11/01/'22
Source Changelog:
• Initial stable version
Device Changelog:
• Initial VNDK 31 Stable build
Notes:
• Clean flash must from crDroid A11.
• Report only device related issues as rom
source code is still beta.
• Non Dynamic Build
• Recommended BitGapps
crDroid.net - Download crDroid v8 for Redmi Note 8 Pro (begonia)
official crDroid v8 for Redmi Note 8 Pro (begonia)
crdroid.net
LINK FOR CORRECT DEVICE:
crDroid.net - Download crDroid v7 for OnePlus 7T (hotdogb)
official crDroid v7 for OnePlus 7T (hotdogb)
crdroid.net