I have a Google Pixel 1, which I have not used for 1 year.
I have now plugged the phone into the charger and fully charged the battery.
However, it does not turn on. If I connect it to the PC only the message "Qualcoom HS-USB QDLoader9008 COM5" appears in the device manager.
Related
Hi All,
1) when i plug in charger into the phone, there is no sound, no led, no anination in statur bar of charging. But the phone is charging perfectly in the background. (using xiaomi original 2A charger with original cable).
2) when i restart the phone while charging it restarts and shows yellow charging led(and turns green too at 100%), but if plug out the charger the led goes away and comes only after i restart again.
2)when i plug in the phone in laptop usb it does nothing. no internal storage shown, nothing in device manager, nothing is detected in misuite as well. i cant access usb at all.
3) phone is only detected in fastbooth mode by miflash which i used to update to latest xiaomi official rom.
what ive tried.
1) various chargers and data cables of different ratings.
2) i have reinstalled all mi4i drivers, adb drivers, misuite etc.
3) have wiped cache several times.
4) have installed latest room.
no idea whats going on. is it a known bug or something? please help
Hello.
I'd like to bring this phone back from the dead. It's completely dead. Cant turn it on. No button combos help. Tried charging it for hours, nothing.
The only thing that does anything is connecting it to PC, which shows up as "Qualcomm HS-USB QDloader 9008 (COM5)". [lets call this QDL for short]
I can change that to "Unknown USB Device" [lets call this UNK for short] using this trick: http://unlimited.io/qhsusbdload.htm easily.
When I open QPST and phone is UNK I can't see it inside.
When I open QPST and phone is QDL I can see it, and it says it's in "download" mode.
Please advise what should I do or try next?
Hello guys, I rooted my HTC one S about four months ago and since then stopped using it as a daily driver, I used to play games, but about two months I did not touch it and I guess its battery juice dried. since yesterday I tried every single method to get in powered it on but I failed, even charging led is not responding, I kept it on charge for 12 hours, even I did jump start for battery, but all useless, one thing I get one noticeable thing that is, when I connect device to my computer, computer recognises as "quectel QDloader 9008"
I am kind of broken now, anyone else faces this problem?
any help will be appreciated.
Okay, so....
What happened:
I was checking my email at work, sitting at my desk, not plugged into anything, when my 13month old Pixel 2 froze and shut off (at >75% battery).
...After that, it never turned on again...
Before anyone asks:
I've never dropped it
I've never exposed it to water.
I've never used anything but the OS it came with (and so I've never installed any kind of TWRP or anything else. I've been a pure vanilla user)
What I have tried:
Holding Power for a solid minute = No response
Power+VolumeUp = No response
Power+VolumeDown = No response
Absolutely no screen flashes, or vibrations.
No light comes on when I connect to the charger either.
What DOES cause a response?:
Every once in a while if I spam click the power button, the red charge light comes on for a split second.
When I connect to my PC via USB, the phones storage is NOT found.
When I run Command Line, it is not found when I use the "ADB Devices" command either.
4) When connected via USB to my PC, it shows up in Device Manager under "Ports (COM & LPT)" as...
"Qualcomm HS-USB QDLoader 9008 (COM3)"
BTW, I didn't make the original post. I read it and it's the same thing that happened to me.
TheLapicero said:
Okay, so....
What happened:
I was checking my email at work, sitting at my desk, not plugged into anything, when my 13month old Pixel 2 froze and shut off (at >75% battery).
...After that, it never turned on again...
Before anyone asks:
I've never dropped it
I've never exposed it to water.
I've never used anything but the OS it came with (and so I've never installed any kind of TWRP or anything else. I've been a pure vanilla user)
What I have tried:
Holding Power for a solid minute = No response
Power+VolumeUp = No response
Power+VolumeDown = No response
Absolutely no screen flashes, or vibrations.
No light comes on when I connect to the charger either.
What DOES cause a response?:
Every once in a while if I spam click the power button, the red charge light comes on for a split second.
When I connect to my PC via USB, the phones storage is NOT found.
When I run Command Line, it is not found when I use the "ADB Devices" command either.
4) When connected via USB to my PC, it shows up in Device Manager under "Ports (COM & LPT)" as...
"Qualcomm HS-USB QDLoader 9008 (COM3)"
BTW, I didn't make the original post. I read it and it's the same thing that happened to me.
Click to expand...
Click to collapse
Hi, have you found a solution to this problem? I got a hard brick after the update (
I have One plus three(android 9.0) . My phone once got dead due to low battery. I plugged the phone and restarted the device but on restarting at 0% itself the screen got line lines(black and purple) and the suddenly my phone shut down again.Afterward, its not responding, no response nothing not able to get to even one plus logo, led in not working, My PC(windows 10) is also not detecting the phone.
I tried to unbrick it using https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700.
But the phone is not detected not of these and obviously not as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)] in device manager.
But the deviceOne Plus 3 hands free HF keeps getting installed in device manager.
It also installs the bluetooth drivers and SMS/MMS under other devices when connecting the device with PC, once uninstalled and connected again.
Thanks.
Good morning community, I have a problem with a J8 that does not show signs of life, it has a battery but it does not turn on.
I connect it to the computer and it gives me "QUALCOMM HS-USB QDLoader 9008". It does not go into download mode or anything, the cell phone was running, waiting for the client to confirm me change the module and it stopped working, previously it turned on but the touch screen was not working