Dead - off, no charge, qdload 9008 in wins - HTC One S

Hello.
I'd like to bring this phone back from the dead. It's completely dead. Cant turn it on. No button combos help. Tried charging it for hours, nothing.
The only thing that does anything is connecting it to PC, which shows up as "Qualcomm HS-USB QDloader 9008 (COM5)". [lets call this QDL for short]
I can change that to "Unknown USB Device" [lets call this UNK for short] using this trick: http://unlimited.io/qhsusbdload.htm easily.
When I open QPST and phone is UNK I can't see it inside.
When I open QPST and phone is QDL I can see it, and it says it's in "download" mode.
Please advise what should I do or try next?

Hello guys, I rooted my HTC one S about four months ago and since then stopped using it as a daily driver, I used to play games, but about two months I did not touch it and I guess its battery juice dried. since yesterday I tried every single method to get in powered it on but I failed, even charging led is not responding, I kept it on charge for 12 hours, even I did jump start for battery, but all useless, one thing I get one noticeable thing that is, when I connect device to my computer, computer recognises as "quectel QDloader 9008"
I am kind of broken now, anyone else faces this problem?
any help will be appreciated.

Related

[Q] Problem with my xt720 no power device unplugged plz help!!

Hi, i have a motorola XT720 which after a short drop it never power on again...there is no cracks nothing at the lcd...so i decide to plug to computer to see whats wrong...no response from the phone..after removing the battery for some hours after put back the battery and connect again to pc nothing except when i pushed the power button, the pc start recognize and start searching for drivers and after a while suddenly it shows device unplugged...also my phone it recognize it as an OMAP3430 device(and searching drivers for that) i have download the drivers from official page of motorola...what to do??please help!!!
Thanks anyway!!
turokomos said:
Hi, i have a motorola XT720 which after a short drop it never power on again...there is no cracks nothing at the lcd...so i decide to plug to computer to see whats wrong...no response from the phone..after removing the battery for some hours after put back the battery and connect again to pc nothing except when i pushed the power button, the pc start recognize and start searching for drivers and after a while suddenly it shows device unplugged...also my phone it recognize it as an OMAP3430 device(and searching drivers for that) i have download the drivers from official page of motorola...what to do??please help!!!
Thanks anyway!!
Click to expand...
Click to collapse
Are you sure that the battery is charged? The PC will not recognize your phone if it is not powered on
Hi, sorry for my late reply have internet problem...thanks for your reply!!! i can't even charg it as i can charge it via phone only..is there a way to charge it other that??
Thanks again!!!

Elephone P3000s not working

My phone only shows the the elephone 2 e sign when I turn it on. I have tried pressing the on and volume key when I turn it on but nothing happened. I have followed some instructions on the elephone manufacturer site about installing drivers to my computer and then trying to reinstall the firmware. Unfortunately my computers (I have tried on three different ones) does not identify that a device is connected to the computer. Therefore I can't proceed to install the driver as according to my computer it is not installed. I have tried 2 different leads as well. I would be grateful for some help as I have no idea where to go from here.
Facing a similar issue, and since there's still no reply to this thread, I would like to add up a few findings I have on this matter to maybe help others and get helped.
My P3000S is also reaching the Elephone logo and displays it for a minute and then restarts, repeating the process (aka boot-loop).
The same happens whether it is connected or not connected to the charger/computer through a USB cable. (I've tried new cables but that's not the case).
When disconnected I can stop the boot-loop only by holding down the on/off button for a few seconds (or removing the battery of course).
When connected to the the charger or computer through the USB cable I have no way to stop the boot-loop (holding down on/off just restarts it).
Now with the battery removed..:
If I connect it to the charger/computer, though the charging red light turns on normally, I can't turn on the phone using the on/off button.
However, when connected through USB to a windows computer, I can see in the device manager that, right when I connect the phone it shows up as "Mediatek Preloader USB VCOM Port" under COM ports group, for 1 second and then disappears as if it was disconnected. There's no repetition here I have to manually hold down the on/off button or disconnect and reconnect the phone from the cable to cause this to happen again.
So, I am unable to flash anything nor turn the phone on because I practically only have 1 second of its presence in my devices list.
Also, I have tried all possible combinations with the volume up/down keys and the on/off button in order to enter recovery mode, with no success..
In case anyone has faced something similar or has any ideas on a possible fix on this phone please feel free to reply.
At last a reply to my initial message. Unfortunately it was someone with the same problem as me. I took out a paypal case against the person I bought the phone from and eventually they repaired it. Unfortunately they never told me how. To make matters worse it broke again within 2 months. The phone is now sat in a draw doing nothing. I have given up on it and will never buy another Elephone phone again.

Qualcomm HS-USB QDLoader 9008 (What?)

Okay, so....
What happened:
I was checking my email at work, sitting at my desk, not plugged into anything, when my 13month old Pixel 2 froze and shut off (at >75% battery).
...After that, it never turned on again...
Before anyone asks:
I've never dropped it
I've never exposed it to water.
I've never used anything but the OS it came with (and so I've never installed any kind of TWRP or anything else. I've been a pure vanilla user)
What I have tried:
Holding Power for a solid minute = No response
Power+VolumeUp = No response
Power+VolumeDown = No response
Absolutely no screen flashes, or vibrations.
No light comes on when I connect to the charger either.
What DOES cause a response?:
Every once in a while if I spam click the power button, the red charge light comes on for a split second.
When I connect to my PC via USB, the phones storage is NOT found.
When I run Command Line, it is not found when I use the "ADB Devices" command either.
4) When connected via USB to my PC, it shows up in Device Manager under "Ports (COM & LPT)" as...
"Qualcomm HS-USB QDLoader 9008 (COM3)"
BTW, I didn't make the original post. I read it and it's the same thing that happened to me.
TheLapicero said:
Okay, so....
What happened:
I was checking my email at work, sitting at my desk, not plugged into anything, when my 13month old Pixel 2 froze and shut off (at >75% battery).
...After that, it never turned on again...
Before anyone asks:
I've never dropped it
I've never exposed it to water.
I've never used anything but the OS it came with (and so I've never installed any kind of TWRP or anything else. I've been a pure vanilla user)
What I have tried:
Holding Power for a solid minute = No response
Power+VolumeUp = No response
Power+VolumeDown = No response
Absolutely no screen flashes, or vibrations.
No light comes on when I connect to the charger either.
What DOES cause a response?:
Every once in a while if I spam click the power button, the red charge light comes on for a split second.
When I connect to my PC via USB, the phones storage is NOT found.
When I run Command Line, it is not found when I use the "ADB Devices" command either.
4) When connected via USB to my PC, it shows up in Device Manager under "Ports (COM & LPT)" as...
"Qualcomm HS-USB QDLoader 9008 (COM3)"
BTW, I didn't make the original post. I read it and it's the same thing that happened to me.
Click to expand...
Click to collapse
Hi, have you found a solution to this problem? I got a hard brick after the update (

J810m, It does not turn on

Good morning community, I have a problem with a J8 that does not show signs of life, it has a battery but it does not turn on.
I connect it to the computer and it gives me "QUALCOMM HS-USB QDLoader 9008". It does not go into download mode or anything, the cell phone was running, waiting for the client to confirm me change the module and it stopped working, previously it turned on but the touch screen was not working

OnePlus 6

Hi everyone,
I need some help with my phone, I was using my phone suddenly a glitch appear in the middle of the screen and then my phone went off. i have tried to turn it on but it doesnt.
when i connect it with phone, it detects it as
Qualcomm HS-USB QDLoader 9008​please help me to fix it
thank you very much

Categories

Resources