Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap.
EmiliuxPlayz said:
Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap.
Click to expand...
Click to collapse
tried all the usb sockets on my computer, noting changed
When i try to power up the phone it says: " Firmware update encountered an issue. Please select recovery mode in Kies & try again."
Install TWRP Recovery in your Note 4 I had also this issue early. First Root your device then install twrp recovery and download Tedy Bear Rom Android 6 Marshmallow easily Available on this thread https://forum.xda-developers.com/t/...10c-h-tedybear-rom-v1-5-updated-v1-5.3768967/
Related
I had already rooted My S6 and install Xero lite rom It's still work fine. Then I try to install Axis rom in twrp
after i was flash my phone look seem got a bootloop ,my screen stuck on "Samsung Galaxy s6 Powered by android " but sound have loop again and again. I Try to put another rom file with Usb Cable and it didn't work then i try to flash stock rom with Odin because my phone still able to get in download mode but when i click start to flash It Show error and fail
can anyone help me please?
Sorry for my bad English skill.
Thankyou.
Bring your S6 back to Samsung for warranty repair.
tan3warut4 said:
I had already rooted My S6 and install Xero lite rom It's still work fine. Then I try to install Axis rom in twrp
after i was flash my phone look seem got a bootloop ,my screen stuck on "Samsung Galaxy s6 Powered by android " but sound have loop again and again. I Try to put another rom file with Usb Cable and it didn't work then i try to flash stock rom with Odin because my phone still able to get in download mode but when i click start to flash It Show error and fail
can anyone help me please?
Sorry for my bad English skill.
Thankyou.
Click to expand...
Click to collapse
When you tried to installed Axis ROM you do a dirty flash or a clean wipe? Can you still get into twrp recovery?
Piece of advice always do a backup or at least have a backup available on your phone.
Make sure to do a clean wipe and then install the ROM. If none of them work flash the official stock ROM for your phone via Odin
hello everyone! I tried to root my note 4 (sm-n910c) 5.1.1 lollipop using this trick http://forum.xda-developers.com/note-4/general/root-note-4-sm-n910c-t2977948 but after press start in odin a "recovery is not a seandroid" appears which is different pop up from the video and after that my phone keeps rebooting again and again in boot loop.
after that I head over here http://forum.xda-developers.com/note-4/development/note-4-910c-kernel-talexop-5-1-1-t3192767. I tried to flash twrp using odin but it didn't work. I mean after flashing my mobile reboots again and again just the same problem. I pulled out the battery and tried to access twrp recovery to flash a custom kernel. but I cant. I cant access twrp. its just bringing me to download mode.
I am wondering if I flash a custom kernel using odin will it work? but those kernels from the link above are all in .zip and not in .tar. so not able to flash using odin.
please help me! I've been searching the whole day just to fix my phone but still got nothing.
Hello,
Try posting your question in the forum linked below.
http://forum.xda-developers.com/note-4/help
The experts there may be able to help. Good luck.
hey guys i tried many a times to install custom rom on my samsung s6 coz i am bored with touchwiz marshmallow
soo when i flash twrp with odin and when i enter TWRP and then reboot without doing anything it wont reboot it just keeps comming Samsung s6 boot again n again
SOO i need help guys i have CM13 for samsung s6 and in installation also it creates error of updater error 7
i edited updater-script and removed setprop line and when i flashed it successfully flashed but when i reboot to system it shows samsung s6 boot with kernel is not seandroid enforcing
Please guys help me to fix i am bored with touchwiz want to use other rom help
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
forumber2 said:
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
Click to expand...
Click to collapse
i have also flashed noble rom same issues pls ****ing help
and btw when i flash arters recovery i can successfully log in its recovery but later on when i flash something and press reboot system then that button doesnt work it just shows it was pressed and is stucked there and can't even move from there
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
S6 SMG920F
Hello,I flashed a bootanimation for it,but when it rebooted nothing showed up!! I have pixel ROM installed and i believe that the problem happened to many users.
-it doesn't show anything(samsung logo-first booting picture)
-it can boot to download mode only
-i flashed stock rom,but still nothing shows up
-i cannot go in recovery mode neither booting
-phone isn't recognized by kies
please HELP,I REALLY NEED HELP,I WILL TRAVEL IN 2 DAYS!!!
Learning noob said:
S6 SMG920F
Hello,I flashed a bootanimation for it,but when it rebooted nothing showed up!! I have pixel ROM installed and i believe that the problem happened to many users.
-it doesn't show anything(samsung logo-first booting picture)
-it can boot to download mode only
-i flashed stock rom,but still nothing shows up
-i cannot go in recovery mode neither booting
-phone isn't recognized by kies
please HELP,I REALLY NEED HELP,I WILL TRAVEL IN 2 DAYS!!!
Click to expand...
Click to collapse
When you go into download mode is the phone recognised by your pc ? Did you try flashing the latest stock firmware for your device through odin ?
Regards
Sawdoctor
sawdoctor said:
When you go into download mode is the phone recognised by your pc ? Did you try flashing the latest stock firmware for your device through odin ?
Regards
Sawdoctor
Click to expand...
Click to collapse
It is recognized by odin but not by samsung kies (it keeps loading)
And yes i tried flashing the latest 6.0.1 firmware from sammobile after flashing it and when the phone reboots it doesnt turn on,and no recovery mode,just odin mode
If there is any special thing to erase everything or a special firmware idk...
Learning noob said:
It is recognized by odin but not by samsung kies (it keeps loading)
And yes i tried flashing the latest 6.0.1 firmware from sammobile after flashing it and when the phone reboots it doesnt turn on,and no recovery mode,just odin mode
If there is any special thing to erase everything or a special firmware idk...
Click to expand...
Click to collapse
When you flash the latest firmware for your device with odin it passes with no errors? Flashing stock firmware with odin will replace your recovery with stock recovery. You could try flashing twrp through odin and then seeing if you can boot into twrp and flash a rom
Sent from my SM-N930F using Tapatalk
sawdoctor said:
When you flash the latest firmware for your device with odin it passes with no errors? Flashing stock firmware with odin will replace your recovery with stock recovery. You could try flashing twrp through odin and then seeing if you can boot into twrp and flash a rom
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
I did flash with no errors,but then after i flash twrp,the problem is that i cant boot into anything exept odin mode even after flashing stock rom i cant boot,i dont see any kind of animation whatsoever,like if its dead but can go into odin
Learning noob said:
I did flash with no errors,but then after i flash twrp,the problem is that i cant boot into anything exept odin mode even after flashing stock rom i cant boot,i dont see any kind of animation whatsoever,like if its dead but can go into odin
Click to expand...
Click to collapse
And after flashing stock with odin kids still doesn't recognise It? Sounds like you need to flash a rom with pit file included, kies emergency firmware rescue does this. Other than that I'm out of ideas
Sent from my SM-N930F using Tapatalk
sawdoctor said:
And after flashing stock with odin kids still doesn't recognise It? Sounds like you need to flash a rom with pit file included, kies emergency firmware rescue does this. Other than that I'm out of ideas
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
After flashing stock with odin it boots only to download mode,then i connect it to kies but it keep on the connecting device screen,it says that it is connecting but never connects with kies
Learning noob said:
After flashing stock with odin it boots only to download mode,then i connect it to kies but it keep on the connecting device screen,it says that it is connecting but never connects with kies
Click to expand...
Click to collapse
Try selecting kies emergency firmware recovery then follow the instructions to see if it connects
sawdoctor said:
Try selecting kies emergency firmware recovery then follow the instructions to see if it connects
Click to expand...
Click to collapse
I shall do that and post this night the result
sawdoctor said:
Try selecting kies emergency firmware recovery then follow the instructions to see if it connects
Click to expand...
Click to collapse
Dont you think it can be fixed by using some toolbox ? Z3x or another one idk
Learning noob said:
Dont you think it can be fixed by using some toolbox ? Z3x or another one idk
Click to expand...
Click to collapse
You can look if mskips toolbox is available for your device yes. That normally contains a software rescue package
Sent from my SM-N930F using Tapatalk