Hi everyone!
Got this Miphone A3 yesterday, and I been searching like a fool after information about this damn phone but it ain't a easy thing to find.
But hey, what do you expect from a cloned iphone
So here's my question:
Anyone sitting on a Miphone and have you done anything with it, most imporant for everything, ROOTED?
Phone info on the phone:
Model number:
A8
Where I bought it, it said A3 on the site (mobino1), same on the battery.
But instead of the iPhone Ui it has the Android Ui pretty sweet that it didnt have the iPhone Ui.
Firmware:
1.5
Don't have Android Market app, but everything looks like Android, also works to install . apk apps tried to install apps from 1.6+ but doesn't work.
Kernel:
2.6.25
Build number:
Linkworld Project .0002_A.1_01r_100129
Been looking for that build number for a while now, don't have any info at all on that one.
Hope some1 here has some info, would be a blessing for me!
EDIT:
I found my way into what i think is the recovery mode, came up a where is said enter flash mode put in usb cable, with red background. Then when i did that, the screen turn blue saying "Enter Flash mode, Begin to flash image..."
Been reading a lot, and i never came up with that kind of "bootloader" just saying that
hope some1 could give me some tips
hi, one of the stores provided firmware from A3, I do not know how fresh. ussd queries are unsuccessful, after ussd calls to hang up. In flash mode turns pressing the upper side volume buttons and switch.
depositfilescom/files/0po3pwcu6 - miphone A3 rom
thanks for that one!
flashed my phone, worked! but it wasnt the same version. this one was with the iphone ui (using ahome)
Model number:
A3
Build number: A3 Project.0001_18r_100411
Seems like my 3G connection does not work with this version. ussd, unsuccessful on this version too, same with previous version.
I was wondering, tried to open the one.bin (flash image) but cannot extract it. Any way to extract the image and try to reconfigure the build?
the phone using "tavor platform" flashing software, anyone know anything about tavor platform?
still trying 2 modify the rom I have, no luck so far.
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
xift said:
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
Click to expand...
Click to collapse
I been trying to extract the .bin file MagicIso can read the file using it "missing files" but can't read the files when extracted. Trying to find a program that could read the rom file, have you done anything to update the phone? Do you have a rom file, if so could you upload it pls?
tried to get the firmware from mobino1 but they just ignore mig those bastards.
Ernest25
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
Click to expand...
Click to collapse
Do you want to flash your phone with the .bin file you already have or do you want to know how to update the phone to android 1.6+?
To flash your phone with tavor flashing software, you need to run the flash program in XP and press "volume up" and "power" on the phone to get to flash mode, then plug in the usb with the flash program open, and it automatically flash the phone.
About updating the phone to a newer version of android I have not a solution.
I been trying to, get info on the hardware so I could try to cook a own rom with at least android 2.0
Cheers
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
xift said:
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
Click to expand...
Click to collapse
Ernest25 said:
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
Click to expand...
Click to collapse
If they just told me straight up, we just sell the phone, we don't have any contact what so ever with the manufacture or developers I would accept it. But this just pissed me off.
I've been asking around on other sites that sells the phone, waiting on answers from them. Hopefully they are more friendly.
Don't downgrade, that was a mistake for me (the rom file azat182 nicely posted).
I tried something yesterday, made a own .bin file with android 2.1 but the flash program wouldn't start with it (parse ini error) so I tricked the flash program that it would flash the one.bin (azat182) rom file.
After it opened I replaced the .bin file with mine. Everything seems to work fine, did every step it should like, root system etc finished 100% when I tried to turn the phone on I couldn't, maybe it didn't know were the power "button" source came from.
The android source was made for an other phone, so I wasn't surprised.
Plugged the usb back in, and luckily the phone connected somehow with the computer so I flash it with the (azat182) rom and I'm back at square -1
but now I think, if I could find out the hardware/drivers on this damn phone it would work to cook a own rom using that method.
Cheers
Oh hey, someone else with one of these phones. I've been messing with mine for a while, started out with the A8 rom (from fastcardtech), and have flashed the A3 rom to the device. I've noticed that the gps works a lot better in the A3 rom than the A8, so it's not much of a downgrade, imo. Recently I've made some headway with an android 2.1 port to the device.
Anyway, this device isn't hard to root. If you adb into it, you can get root from the device by remounting /system as RW and pushing a fixed su binary to /system/bin, or wherever it goes, it's been a while
The MTD partitioning in the Miphone's rom is a big giant mess. The rom is split into 25 partitions, the kernel isn't in boot.img like it's supposed to be, neither are the kernel parameters.
The bootloader is dumb, it doesn't check for signed images. The A3 image and A8 image are both engineering builds.
wow you seem to know a lot about it...
does 3g work for you in the a3 rom? also gps doesn't work for me in a8... so a3 could be a possibility if 3g worked.
how did you adb your phone? I could not connect... the driver just didn't show a phone. although I changed the vendor ids etc...
could you write a short tutorial of some sort? would be nice!
if you are root, couldn't you make a backup of your firmware?
is there a downloadable a8 rom at fastcardtech?
regards, xift
I haven't been able to get 3g working, just edge. I don't think the 3g will work in the US, as none of the carriers will work with just wcdma2100, but I'm no expert on the subject. I've had reasonably good luck with the gps with an app called Maverick, but I don't have a data plan currently, so no agps. With gps alone, it takes about a minute or so in an open area to acquire a lock.
For ADB, there's a driver in the android sdk, but don't bother with it. Instead, the phone's going to show up as a rndis/ethernet gadget. For windows, drivers for this can be found at webos-internals.org/wiki/USBnet_networking_setup, just the .inf is all you'll need; MacOS and Linux will just see the ethernet gadget. Once that's installed, the phone will show up on the PC side as a network interface that will need an IP address; I've been using 169.254.231.10 and subnet 255.255.255.0. Once your network interface is configured, you should be able to run adb connect 169.254.231.168:5555, assuming you've got your android sdk tool set up already. From there, you can adb shell in and poke around. Once you get an adb shell, you'll have a root prompt, but to get 'rooted' so that other android apps can make use of it, you'll want to run adb remount to remount /system as RW, then copy a working version of su over to the phone. I think superuser whitelist comes with one.
I don't usually go to that much trouble, as I end up cycling between the A3 firmware and my Eclair build a lot, and the A3 rom is jacked up to where it's a pain to get a terminal emulator running on it. Adb from my desktop seems to get the most mileage.
Fastcardtech didn't have any useful information about recovery firmware that they had, a release date for an android 2.1 rom, information on the manufacturer, anything.
Wow thanks a lot... I tried with the sdk driver.
port 5555 seemed blocked there although it was obviously responding (took much longer than other ports). Thanks for your help - I'll try that one.
Could you upload your eclaire build?
I don't have much time at the moment because of my bachelor's thesis. But I'd like to see that and maybe I could help a bit. Although I do not have any experience with mobile devices etc.
You may need to mess with the usb debugging option. After flashing to the a3 rom, it's enabled. I remember it being the same between the a8 and a3 roms.
At some point, yeah, I'll my eclair build up. I'd like to at least get bluetooth, gsm and wifi going again before I do. I don't have a rom that you'd be able to flash currently; more like a big pile of build scripts, and install scripts for the android system and ramdisk.
yeah I understand that. You could open a google code project or something.
nice to know that there is somebody working on this.
usb debugging is enabled by default. I'll just have to try again.
thanks for your help so far.
file inf
I not have disk only cd and dvd when I will install the drive without the disk says no drive found I save the file as usbnet-pre.inf
if anyone can help me pls
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
xift said:
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
Click to expand...
Click to collapse
linux complicated for me but thank you I hope good news from you about how root this bastard mobile
I have the A3 if you're interested I can pass to you
Does anyone know where I can get the tun.ko for the G2X?
Thanks.
I believe Faux has a kernel that has tun.ko in it. Are you working on openvpn?
Does anyone have a link to download the tun.ko driver for G2x? I'd prefer not to flash a ROM atm. Everything is working nice on my stock ROM for now. Going to wait until GB update if it ever gets released.
Need to get OpenVPN or VPNC working for my work's Cisco ASA.
Tun.ko isn't a driver, its a kernel module. The kernel needs to support it, so just copying it over might not help.
Sent from my LG-P999
Ah, I see. Not super linux savy so assumed it was a driver. Is it pretty easy to enable the module? Is there a huge risk in f-ing up your kernel / phone? If there's a guide that's relatively easy, might be worth a try.
Why did Android not support the most common VPN connection type out there? No support for PSK with group user/pass drives me batty.
It's really easy to flash a custom kernel, and it'll probably make things run a little smoother on your phone.
If you're still using the stock rom just flash this kernel as you would a rom: http://forum.xda-developers.com/showthread.php?t=1102720
It'll flash the new kernel but leave your rom intact with no changes.
I may be wrong, but i think you'll need a custom rom with OpenVNP built in to work. I dont think just flashing the kernel with this module will just magically give you new functionality, but it's worth a shot.
I wanted to try out Kali Linux for the first time today but when I checked out their website, it showed a download link only for cm12.1 version, since I don't know much about Kali Linux. What can I do to install it on COS13?
Be a developer and make it.
https://github.com/offensive-security/kali-nethunter/wiki
According to this page which I stumbled upon while reading about NetHunter after a google search, it's new to me, I see that it supports either 12.1 or 13 with the zip. Just gotta read man, that's all.
silverton said:
Be a developer and make it.
https://github.com/offensive-security/kali-nethunter/wiki
According to this page which I stumbled upon while reading about NetHunter after a google search, it's new to me, I see that it supports either 12.1 or 13 with the zip. Just gotta read man, that's all.
Click to expand...
Click to collapse
The big question is will it support COS 13, cause I'm on COS 13 and not CM 13
It's mostly the same. Back up your ROM and give it a go.
Kali net hunter for bacon marshmallow
https://www.androidfilehost.com/?fid=24533103863138348
And net hunter kernel
https://www.androidfilehost.com/?fid=24533103863138347
I flashed COS 13 TWRP flashable zip and boot then reboot to twrp again and flash kali net hunter and update and kernel .
I flashed successfully but after that what to do with these applications ? Anybody can explain about net hunter apps and how to use ?
i need some help devs,
im a newbie and i tried to port custom aosp rom using tutorials i found on the internet,and of course here. i replaced all files and pack port rom in zip but unable to flash it,it says error executing updater binary in zip .......
im using leagoo elite with stock rom rooted and tried to port aosp 7.0 for another device but same specs except kernel (newer) in rom
i didnt managed to find tutorial how to port kernel so i just replaced boot.img,
and one little thing, rom i tried to port was packed to new.dat files,and i managed to unpack but cant repack it again
i read that if u flash via recovery only boot.img has to be in img file or correct me if iam wrong
please help me with this or with tutorials or guide me throu this,
im just a guy who wants latest android for his phone but there is no devs that work on this phone
if there is anyone who is willing to do this for me i can pm him links for download of everything he needs and i can make a donation if it works, cheers
sry for bad english
You will need to find pre-built blobs for your device or extract them. If they do not work on newer Android versions you will need to hack them or find alternatives. Not everything is the same about the device, including the panel, camera etc... You will hopefully not need to edit the kernel for the blobs to work properly, but it's a lot more work than you think it is.
BRiANj64 said:
You will need to find pre-built blobs for your device or extract them. If they do not work on newer Android versions you will need to hack them or find alternatives. Not everything is the same about the device, including the panel, camera etc... You will hopefully not need to edit the kernel for the blobs to work properly, but it's a lot more work than you think it is.
Click to expand...
Click to collapse
I found the phone with exact same specs procesor ram storage camera mp not sure about lenses but i dont find tha as important, only thing that is different is kernel version. Blobs are? I know its not easy but im trying to learn something. I found 101 guide for this but after reading all of that it just messes up in my head. I would like to find someone who can walk me through that step by step and share his knowledge
skinheadXhc said:
I found the phone with exact same specs procesor ram storage camera mp not sure about lenses but i dont find tha as important, only thing that is different is kernel version. Blobs are? I know its not easy but im trying to learn something. I found 101 guide for this but after reading all of that it just messes up in my head. I would like to find someone who can walk me through that step by step and share his knowledge
Click to expand...
Click to collapse
Blobs are pre-built drivers that do not have a source and thus cannot be built by CM themselves. You could try to compare all the drivers in system/libs on stock ROM of your device and CM of the other. There are tutorials on how to port CM to any device, try to search for such topics, they are very helpful.
I have been searching for kernel with nethunter patch for Jason, but unfortunately it seems no one has ever develop it.
If someone had compiled or have kernel for our device that can use full possibility of nethunter, please share guys ...
Sorry for my English :laugh:
Hello, bro. I've got the same problem. I did it: I'm installed nethunter by using TWRP. Yes, I downloaded "nethunter-generic-arm64.zip" and installed it. Even HID attacks are worked. For wifi adapters (not bluetooth), try "Wireless Firmware Nethunter". If you've got Magisk Manager, go to "Modules" and find and download "Wireless Firmware for Nethunter". Then reboot to TWRP and go to /sdcard/Download and find Wireless-Firmware-For-Nethunter.zip and download it. But I don't know, will it help you. I've got wifi-adapter TP-LINK, my phone can't work with him but see it.
$ lsusb
TP-LINK Wireless Adapter
(ifconfig don't see Wireless Adapter.) (I hope it's problem of my bad USB-OTG). For bluetooth, I didn't find anything. I tried to build kernel for jason, but there is really much prolem and errors. Maybe, I will make it... It's really difficult.