TCL U55C7006 - General Questions and Answers

Hi all,
got a TCL U55C7006 that stop booting at android logo animation forever.
I have tried the several method on USB KEY:
using Update.pkg from V8-T658T01-LF1V574_PKG_USB_GMC.zip
V8-T658T01-LF1V574.zip
then pressing on power stick in the background for 30s... nothing
Sometime I get an image onto the tcl logo with a "tv and red cross" and error message...
It is very disapointing: the tv is still working, but android is just crashed...
Someone got this problem and has solved it?
Thanx

Hello,
I have newly bought a tcl tv u55c7006. Firmware is :
Hardware : MT5891
Model : Percee TV
Build number : OTT1.180130.001
Build date UTC : 20180726-140542
Android v : 8.0.0
Baseband v: -----
Kernel v : 3.10.79 ([email protected]) (gcc version 4.8.2 20131014 (prerelease) (Linaro GCC 4.8-2013.10) ) #1 SMP Mon Jan 13 23:40:04 CST 2020
=> everything looks running but no signal in TV input. Antenna cable is ok (tested with another Tv). Found stations:32 but no pictures, no programme selectable.
Which newest firmware is better for this model?
I am living in France.
Thank for your attention and feedback.

Do you get something similar to this?
Or it doesnt get to fully install the firmware?

I did not see Tv channel after searching and found 39 channels but it is my issue. After upgrade to MT58 LF1V574. The issue is the same. Some channels are found but none is memorized!

kelly-x974 said:
Hi all,
got a TCL U55C7006 that stop booting at android logo animation forever.
I have tried the several method on USB KEY:
using Update.pkg from V8-T658T01-LF1V574_PKG_USB_GMC.zip
V8-T658T01-LF1V574.zip
then pressing on power stick in the background for 30s... nothing
Sometime I get an image onto the tcl logo with a "tv and red cross" and error message...
It is very disapointing: the tv is still working, but android is just crashed...
Someone got this problem and has solved it?
Thanx
Click to expand...
Click to collapse
Did you solve it? I have the same issue now

XDAmagic said:
Did you solve it? I have the same issue now
Click to expand...
Click to collapse
Anyone ever made this work? My u55c7006 crashes on random between 5 and 20 secs, tcl or android logo

Related

Eken T01A not working after FW Update.

Hi I got Eken T01A tablet. But last night I forgot to switch off the device, hence the battery got drained completely. After that I charged the device, but when I turn it on I have the battery picture with an exclamation mark.
I searched in Google and found that, reflashing the device will fix the issue. So I re-flashed the device with this FW : t01a-zx-0329_worked-1.img
The battery issue get resolved after this FW update and device get switched ON. But the Display is splitted in to 2 parts ( see the attached image) and touch is not working. The device was completely useless.
So I searched again and downloaded and re-flashed with this FW :sun4i_crane-T01A-V1.4_m7660-20120731. But the issues are not fixed.
The dispaly is showing splitted and the touch is working in opposite direction. That is when I drag horizontally, the device is sensing it as vertical movement and vice-versa. The camera is not working. The screen rotation is working perfectly. When I connect a mouse it will work.
I have attached the screen shots of the device.
Here is the complete details of the device.
Model Number : T01A
Android Version : 4.0.4
Base Band Version : 1.4rc3
Kernel Version : 3.0.8+ [email protected] #53 Jul26 16:44:59 CST2012
Build Number : crane_m 1003h6-eng 4.0.4 IMM76D 20120731
Please help me fixing the issue.
Thanks,
Arun S
arunssasidhar said:
Hi I got Eken T01A tablet. But last night I forgot to switch off the device, hence the battery got drained completely. After that I charged the device, but when I turn it on I have the battery picture with an exclamation mark.
I searched in Google and found that, reflashing the device will fix the issue. So I re-flashed the device with this FW : t01a-zx-0329_worked-1.img
The battery issue get resolved after this FW update and device get switched ON. But the Display is splitted in to 2 parts ( see the attached image) and touch is not working. The device was completely useless.
So I searched again and downloaded and re-flashed with this FW :sun4i_crane-T01A-V1.4_m7660-20120731. But the issues are not fixed.
The dispaly is showing splitted and the touch is working in opposite direction. That is when I drag horizontally, the device is sensing it as vertical movement and vice-versa. The camera is not working. The screen rotation is working perfectly. When I connect a mouse it will work.
I have attached the screen shots of the device.
Here is the complete details of the device.
Model Number : T01A
Android Version : 4.0.4
Base Band Version : 1.4rc3
Kernel Version : 3.0.8+ [email protected] #53 Jul26 16:44:59 CST2012
Build Number : crane_m 1003h6-eng 4.0.4 IMM76D 20120731
Please help me fixing the issue.
Thanks,
Arun S
Click to expand...
Click to collapse
I have Supervox Your Tab, this is clone of Eken T01A. I flashed with FW sun4i_crane-T01A-V1.4_m6225-20120731, and work OK.
Link for FW:
Code:
ftp://202.105.131.8/T01A-V1.4_6225.rar

[Q] [MT6573] Clear Flash Accidentally on Beyond BPad at Recovery Mode

Hello at all,
Please Help Me..........
I bought one tablet called Beyond BPad made in Indonesia with MT6573 CPU.
Why ? Because I'm Indonesian. It has two Sim Cards
Is not the best phone in the world, but it's enough for me for every basics days
So, After install all my applications, and working well... I want make the device better
accidentally, i entered "Recovery Mode" by pressing Back+Down Vol+Power buttons.
I dont know what i'm doing, I choose "Clear Flash". And suddenly, this device cannot start at all. Im tryng to reenter "Recovery Mode" but i cant. Its only showing Android Logo and Triangle with "!".
My questions is:
1. What is happened?
2. How to fix it?
3. Its any hope for me to solve it by tools anyway?
For adds: Ive been to solve it myself. by connected the device to my Notebook Acer Aspire 4730z. I also install the USBdrivers. But, it cannot read the device. Im trying to find the problem. It shows in devices properties that Android Composite Devices said "Currently, this hardware device is not connected to the computer. (Code 45)". is it because i install wrong drivers? Is there anyway to fix this?
when i'm trying to "Factory Mode" it still works.
After I have one menu with:
- Full Test
- Item Test
- Test Report
- Clear Flash
- Version
- Reboot
I choose - Version and it shows:
bb chip : mt6573
ms board. : qishang73_gb
imei1: unknown
imei2: unknown
modem ver.: MAUI.11AMD.W11.37.SP.V8.F2. 2012/03/28 18:04
Bar Code: 040501234567890123456710
Build Time: Fri Apr 13 2012, 12:10:05
UBoot ver: 2010.06
Kernel Ver: 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) #2 PREEMPT Fri Apr 13 2012, 14:04:31 CST
Android Ver.: 2.3.6
SW Ver.: ALPS.GB.FDD2.MP.V3.14
Custom Ver.: release.v2.02
anyone can help my problem? i love this android so much.
thank you for help me.
i think i have the same tablet
rpplt said:
Hello at all,
Please Help Me..........
I bought one tablet called Beyond BPad made in Indonesia with MT6573 CPU.
Why ? Because I'm Indonesian. It has two Sim Cards
Is not the best phone in the world, but it's enough for me for every basics days
So, After install all my applications, and working well... I want make the device better
accidentally, i entered "Recovery Mode" by pressing Back+Down Vol+Power buttons.
I dont know what i'm doing, I choose "Clear Flash". And suddenly, this device cannot start at all. Im tryng to reenter "Recovery Mode" but i cant. Its only showing Android Logo and Triangle with "!".
My questions is:
1. What is happened?
2. How to fix it?
3. Its any hope for me to solve it by tools anyway?
For adds: Ive been to solve it myself. by connected the device to my Notebook Acer Aspire 4730z. I also install the USBdrivers. But, it cannot read the device. Im trying to find the problem. It shows in devices properties that Android Composite Devices said "Currently, this hardware device is not connected to the computer. (Code 45)". is it because i install wrong drivers? Is there anyway to fix this?
when i'm trying to "Factory Mode" it still works.
After I have one menu with:
- Full Test
- Item Test
- Test Report
- Clear Flash
- Version
- Reboot
I choose - Version and it shows:
bb chip : mt6573
ms board. : qishang73_gb
imei1: unknown
imei2: unknown
modem ver.: MAUI.11AMD.W11.37.SP.V8.F2. 2012/03/28 18:04
Bar Code: 040501234567890123456710
Build Time: Fri Apr 13 2012, 12:10:05
UBoot ver: 2010.06
Kernel Ver: 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) #2 PREEMPT Fri Apr 13 2012, 14:04:31 CST
Android Ver.: 2.3.6
SW Ver.: ALPS.GB.FDD2.MP.V3.14
Custom Ver.: release.v2.02
anyone can help my problem? i love this android so much.
thank you for help me.
Click to expand...
Click to collapse
i hope u found a solution for ur problem.... my tablet has the same information u provided ..is there a way i can update its android version?

[Q] bootloop i8190

hello i dont know what to do and im in a panic i have the s3 mini i8190 and its rooted but when i was playing with supersu i ticked a box with something to do with supersu boot etc etc and now my phone is in a bootloop i can still see all the stuff when i boot phone holding vol+menu+power on sd card and i can see recovery clockworkmods but they just say file error ive installed adb and fastboot onto my computer also the drivers for my samsung also been installed and ive been trying to find out what i need to do now to get the adb fastboot commands so i can try to work out what i need to do to get my phone back working any advice would be so helpful as im beginning to think ive messed it up but the good thing is i can still see commands on the phone in recovery mode etc etc
my name is conner thanks for you time email connertheoleon @hotmail.co.uk
bb chip samsung golden
ms board golden
imei1 358951000126716
imei2 358951000126724
modem ver naui.11amd.w11.50.sp.v37.2013/05/11 11.15
bar code 0904010101028377085310_18081810
uboot ver 2010.06
kernel ver 3.0.13-380934 ([email protected] ep-110) (gcc version n 4.4.3 (gcc ) 2 smp
preempt wed oct 24 23 40;54 kst 2012
android ver 4.1.1
sw ver alps.gb2.mp.v2.30
custom build verno 1375683732

MT6572 clone M7 screen problem...Please help!

Hello to all. I would like to ask you advice/ opinion regarding my case. I own a Lenovo clone M7 MT6572 with those features:
Hardware : MT6572
Model : M7
Build number : A10E_AX_CHT_S7_MTH_V02_10042015
Build date UTC : 20150410-100306
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V36.P3, 2015/01/08 16:13
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Apr 10 18:01:07 CST 2015
It's rooted, but it still retains it's original ROM.
Suddenly ,out of the blue, the upper part of the screen (the area around the clock) started to blink or to flick, like in a PC monitor when you set the frequency to high.
The worst part was ,after a while , the 9/10 part of the screen went black (black out) except the small upper flickering part,which was still responsive to touch.If i close it for a couple minutes it is restored but for a short period of time.
I tried a lot like reseting and restoring the factory settings, formating the system and cache,but nothing seems to be the solution.
It's any way to boot it in safe mode? Do you believe is a software or a hardware problem? Any suggestion will be welcome

my android car stereo stuck on logo

Hi
my lovely car that I have bought 3 years ago and has a nice android screen, has stuck a week ago on Toyota logo after was connected on internet. I never updated. I finally knew how to get in into recovery mode, and I download many updated from here via usb but none of them get work with it. please I need a help from you, I have been to many stores here in Saudi but no one of them know anything how to fix it.
Here is some information about my android car:
Version of the intention: 3.0.36+
[email protected] #1655
version number:
rk30sdk-eng4.2.2 15012015.15:42:22
MCU version:
MTCB-YZ-V2.21

Categories

Resources