my android car stereo stuck on logo - MTCD Android Head Units Q&A

Hi
my lovely car that I have bought 3 years ago and has a nice android screen, has stuck a week ago on Toyota logo after was connected on internet. I never updated. I finally knew how to get in into recovery mode, and I download many updated from here via usb but none of them get work with it. please I need a help from you, I have been to many stores here in Saudi but no one of them know anything how to fix it.
Here is some information about my android car:
Version of the intention: 3.0.36+
[email protected] #1655
version number:
rk30sdk-eng4.2.2 15012015.15:42:22
MCU version:
MTCB-YZ-V2.21

Related

[Q] [Root and Upgrade a cloned phone

Hi to everyone. Ive red til' now the forum but it's a very difficult situation.. I got a cloned Note(|)
So here we starts
My phone is an :
Manufacturer: alps
Model: e1809c_v75_gq1008_9p017
Version: eng.root.1352985437
Drivers: mt65xx
Android Version: 4.0.4
Kernel Version: 3.0.13 (yes it's written just this number and a date"thu nov ecc.)
Rooting
Problems: Main problem is i dont have download mode, i have "factory mode" when im trying to get into download mode. Recovery Mode is working
what i have tried: SuperOneclick, Oneclick,z4r00t, busybox, gingerbread
In any case the problem is "my device is not supported
even with installed drivers.
Upgrading
Problems: exactly the same thing, i can't enter in download mode. plus i dont know if i mount a rom in a cloned phone what could happen.
and where find "special ROMS" for my phone.
Thanks so much for your support, i think i have an headache because i tried too many time to unlock this device
I have to say congratulations for the forum .
Hisoka<3 said:
Hi to everyone. Ive red til' now the forum but it's a very difficult situation.. I got a cloned Note(|)
So here we starts
My phone is an :
Manufacturer: alps
Model: e1809c_v75_gq1008_9p017
Version: eng.root.1352985437
Drivers: mt65xx
Android Version: 4.0.4
Kernel Version: 3.0.13 (yes it's written just this number and a date"thu nov ecc.)
Rooting
Problems: Main problem is i dont have download mode, i have "factory mode" when im trying to get into download mode. Recovery Mode is working
what i have tried: SuperOneclick, Oneclick,z4r00t, busybox, gingerbread
In any case the problem is "my device is not supported
even with installed drivers.
Upgrading
Problems: exactly the same thing, i can't enter in download mode. plus i dont know if i mount a rom in a cloned phone what could happen.
and where find "special ROMS" for my phone.
Thanks so much for your support, i think i have an headache because i tried too many time to unlock this device
I have to say congratulations for the forum .
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=1886460
prasad12ka4 said:
Try this:
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
Excuse me, have you got any other alternative? because actually its not working.
"Permission denied" "failed to copy /data/app/"

[Q] XDE Technologies i9220 Galaxy Note Clone ROM needed

Hi all! I have recently purchased the above mentioned phone and it's gone haywire. It just cant boot it stands an the start logo. Fastboot mode works like a charm but the recovery menu dissapeared. Can someone please who has the same phone pull out the original system.img, boot.img and recovery.img through adb and put it here so I can try to flash it through fastboot. When the phone worked it had this:
GINGERBREAD.XXKL3
kernel [email protected]#2
model I9220DDKL
It's android 4.0.9 which I know doesnt exist but if someone has a phone like me I would be very thankful. I don't want to send it to China for repairs because I'm from Europe and it would take ages. Customer support of the company that makes it wouldn't help me at all.
So if someone can do this I would be very grateful.
Thanks in advance

[Completed] Philips Android TV Crash / Bootloop ? 55PUS6401/12

Hey guys.
i bought a brand new philips tv 3 weeks ago. worked fine untill i started it up a few days ago.
it shows the philips logo & it is booting up android.. after optimizing the apps it says android is starting and then it reboots again.
Sometimes it even shows me the recovery mode.
Tried to install the new firmwire via recoverymode didnt work.
i already did make a call to philips they ordered parts for my tv to repair it on location.
but i just wanna watch tv haha.. maybe you guys can help me out ?
It is running the official rom. tried to wipe the cache also.
Regards,
Leroy
L2202 said:
Hey guys.
i bought a brand new philips tv 3 weeks ago. worked fine untill i started it up a few days ago.
it shows the philips logo & it is booting up android.. after optimizing the apps it says android is starting and then it reboots again.
Sometimes it even shows me the recovery mode.
Tried to install the new firmwire via recoverymode didnt work.
i already did make a call to philips they ordered parts for my tv to repair it on location.
but i just wanna watch tv haha.. maybe you guys can help me out ?
It is running the official rom. tried to wipe the cache also.
Regards,
Leroy
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here. This thread seems to be the most relevant for your issue:
Philips Android TV
Try posting your query there. Experts there may be able to help you.
Good luck

Need Firmware (update) for a DGTEC DG101TBIPS Tablet

this is a cheap tablet *$100 from BIg w (Australian discount department stores)
Tiltle: DGTEC 10.1" Tablet. With 2GB ram and 16GB
Brand: DG101TBIPS
Manufacture: DGTEC
Chip ROCKCHIP
RK3326
Android OS Version 9 pie
board: BND_RK3326_S863_A1.2
i was stupid and was my first flashing attempt, i flashed the boot and recovery with some random image file not knowing what i was doing, and now it wont turn on, cant get into recovery either. pc recognises it as unknown device if i use rock batchtool and install driver it see it rock usb but still connect/disconnects every few secs., so i guess i need to flash firmware (update) wtih rock_batch tools or some thing to unbrick.
CHEERS AND HOPE WE CAN ALL HELP EACH OTHER
Bump

TCL U55C7006

Hi all,
got a TCL U55C7006 that stop booting at android logo animation forever.
I have tried the several method on USB KEY:
using Update.pkg from V8-T658T01-LF1V574_PKG_USB_GMC.zip
V8-T658T01-LF1V574.zip
then pressing on power stick in the background for 30s... nothing
Sometime I get an image onto the tcl logo with a "tv and red cross" and error message...
It is very disapointing: the tv is still working, but android is just crashed...
Someone got this problem and has solved it?
Thanx
Hello,
I have newly bought a tcl tv u55c7006. Firmware is :
Hardware : MT5891
Model : Percee TV
Build number : OTT1.180130.001
Build date UTC : 20180726-140542
Android v : 8.0.0
Baseband v: -----
Kernel v : 3.10.79 ([email protected]) (gcc version 4.8.2 20131014 (prerelease) (Linaro GCC 4.8-2013.10) ) #1 SMP Mon Jan 13 23:40:04 CST 2020
=> everything looks running but no signal in TV input. Antenna cable is ok (tested with another Tv). Found stations:32 but no pictures, no programme selectable.
Which newest firmware is better for this model?
I am living in France.
Thank for your attention and feedback.
Do you get something similar to this?
Or it doesnt get to fully install the firmware?
I did not see Tv channel after searching and found 39 channels but it is my issue. After upgrade to MT58 LF1V574. The issue is the same. Some channels are found but none is memorized!
kelly-x974 said:
Hi all,
got a TCL U55C7006 that stop booting at android logo animation forever.
I have tried the several method on USB KEY:
using Update.pkg from V8-T658T01-LF1V574_PKG_USB_GMC.zip
V8-T658T01-LF1V574.zip
then pressing on power stick in the background for 30s... nothing
Sometime I get an image onto the tcl logo with a "tv and red cross" and error message...
It is very disapointing: the tv is still working, but android is just crashed...
Someone got this problem and has solved it?
Thanx
Click to expand...
Click to collapse
Did you solve it? I have the same issue now
XDAmagic said:
Did you solve it? I have the same issue now
Click to expand...
Click to collapse
Anyone ever made this work? My u55c7006 crashes on random between 5 and 20 secs, tcl or android logo

Categories

Resources