Database Info

[Q] [Root and Upgrade a cloned phone

Hi to everyone. Ive red til' now the forum but it's a very difficult situation.. I got a cloned Note(|)
So here we starts
My phone is an :
Manufacturer: alps
Model: e1809c_v75_gq1008_9p017
Version: eng.root.1352985437
Drivers: mt65xx
Android Version: 4.0.4
Kernel Version: 3.0.13 (yes it's written just this number and a date"thu nov ecc.)
Rooting
Problems: Main problem is i dont have download mode, i have "factory mode" when im trying to get into download mode. Recovery Mode is working
what i have tried: SuperOneclick, Oneclick,z4r00t, busybox, gingerbread
In any case the problem is "my device is not supported
even with installed drivers.
Upgrading
Problems: exactly the same thing, i can't enter in download mode. plus i dont know if i mount a rom in a cloned phone what could happen.
and where find "special ROMS" for my phone.
Thanks so much for your support, i think i have an headache because i tried too many time to unlock this device
I have to say congratulations for the forum .

Hisoka<3 said:
Hi to everyone. Ive red til' now the forum but it's a very difficult situation.. I got a cloned Note(|)
So here we starts
My phone is an :
Manufacturer: alps
Model: e1809c_v75_gq1008_9p017
Version: eng.root.1352985437
Drivers: mt65xx
Android Version: 4.0.4
Kernel Version: 3.0.13 (yes it's written just this number and a date"thu nov ecc.)
Rooting
Problems: Main problem is i dont have download mode, i have "factory mode" when im trying to get into download mode. Recovery Mode is working
what i have tried: SuperOneclick, Oneclick,z4r00t, busybox, gingerbread
In any case the problem is "my device is not supported
even with installed drivers.
Upgrading
Problems: exactly the same thing, i can't enter in download mode. plus i dont know if i mount a rom in a cloned phone what could happen.
and where find "special ROMS" for my phone.
Thanks so much for your support, i think i have an headache because i tried too many time to unlock this device
I have to say congratulations for the forum .
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=1886460

prasad12ka4 said:
Try this:
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
Excuse me, have you got any other alternative? because actually its not working.
"Permission denied" "failed to copy /data/app/"

[Q] please help i tryed eeryting i know

when I turn on tablet flytouch 8 (superpad 8) it hangs on android wrighting I try to get in to recovery mode with power plus home key all I get is the android man on his back with red explaintion mark I have tried other button combs with no joy so is there a way to get in to recovery mode to factory rest it mt table is
model number bc1003
android version 4.0.4
baseband 1.5rc4
kernel version 3.0.8 [email protected] #2
build number crane_bc1003-eng 4.0.4 imm76d 20120810 test-keys
or can someone help me find bc1003 tablet pc driver so then I might be able to use odin to reinstall a rom
please help

[Q] bootloop i8190

hello i dont know what to do and im in a panic i have the s3 mini i8190 and its rooted but when i was playing with supersu i ticked a box with something to do with supersu boot etc etc and now my phone is in a bootloop i can still see all the stuff when i boot phone holding vol+menu+power on sd card and i can see recovery clockworkmods but they just say file error ive installed adb and fastboot onto my computer also the drivers for my samsung also been installed and ive been trying to find out what i need to do now to get the adb fastboot commands so i can try to work out what i need to do to get my phone back working any advice would be so helpful as im beginning to think ive messed it up but the good thing is i can still see commands on the phone in recovery mode etc etc
my name is conner thanks for you time email connertheoleon @hotmail.co.uk
bb chip samsung golden
ms board golden
imei1 358951000126716
imei2 358951000126724
modem ver naui.11amd.w11.50.sp.v37.2013/05/11 11.15
bar code 0904010101028377085310_18081810
uboot ver 2010.06
kernel ver 3.0.13-380934 ([email protected] ep-110) (gcc version n 4.4.3 (gcc ) 2 smp
preempt wed oct 24 23 40;54 kst 2012
android ver 4.1.1
sw ver alps.gb2.mp.v2.30
custom build verno 1375683732

MT6572 clone M7 screen problem...Please help!

Hello to all. I would like to ask you advice/ opinion regarding my case. I own a Lenovo clone M7 MT6572 with those features:
Hardware : MT6572
Model : M7
Build number : A10E_AX_CHT_S7_MTH_V02_10042015
Build date UTC : 20150410-100306
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V36.P3, 2015/01/08 16:13
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Apr 10 18:01:07 CST 2015
It's rooted, but it still retains it's original ROM.
Suddenly ,out of the blue, the upper part of the screen (the area around the clock) started to blink or to flick, like in a PC monitor when you set the frequency to high.
The worst part was ,after a while , the 9/10 part of the screen went black (black out) except the small upper flickering part,which was still responsive to touch.If i close it for a couple minutes it is restored but for a short period of time.
I tried a lot like reseting and restoring the factory settings, formating the system and cache,but nothing seems to be the solution.
It's any way to boot it in safe mode? Do you believe is a software or a hardware problem? Any suggestion will be welcome

TCL U55C7006

Hi all,
got a TCL U55C7006 that stop booting at android logo animation forever.
I have tried the several method on USB KEY:
using Update.pkg from V8-T658T01-LF1V574_PKG_USB_GMC.zip
V8-T658T01-LF1V574.zip
then pressing on power stick in the background for 30s... nothing
Sometime I get an image onto the tcl logo with a "tv and red cross" and error message...
It is very disapointing: the tv is still working, but android is just crashed...
Someone got this problem and has solved it?
Thanx

Hello,
I have newly bought a tcl tv u55c7006. Firmware is :
Hardware : MT5891
Model : Percee TV
Build number : OTT1.180130.001
Build date UTC : 20180726-140542
Android v : 8.0.0
Baseband v: -----
Kernel v : 3.10.79 ([email protected]) (gcc version 4.8.2 20131014 (prerelease) (Linaro GCC 4.8-2013.10) ) #1 SMP Mon Jan 13 23:40:04 CST 2020
=> everything looks running but no signal in TV input. Antenna cable is ok (tested with another Tv). Found stations:32 but no pictures, no programme selectable.
Which newest firmware is better for this model?
I am living in France.
Thank for your attention and feedback.

Do you get something similar to this?
Or it doesnt get to fully install the firmware?

I did not see Tv channel after searching and found 39 channels but it is my issue. After upgrade to MT58 LF1V574. The issue is the same. Some channels are found but none is memorized!

kelly-x974 said:
Hi all,
got a TCL U55C7006 that stop booting at android logo animation forever.
I have tried the several method on USB KEY:
using Update.pkg from V8-T658T01-LF1V574_PKG_USB_GMC.zip
V8-T658T01-LF1V574.zip
then pressing on power stick in the background for 30s... nothing
Sometime I get an image onto the tcl logo with a "tv and red cross" and error message...
It is very disapointing: the tv is still working, but android is just crashed...
Someone got this problem and has solved it?
Thanx
Click to expand...
Click to collapse
Did you solve it? I have the same issue now

XDAmagic said:
Did you solve it? I have the same issue now
Click to expand...
Click to collapse
Anyone ever made this work? My u55c7006 crashes on random between 5 and 20 secs, tcl or android logo