Warning :- I am not responsible for any kind of your device damage like soft or
hard brick . DO IT OWN YOUR RISK
Pre- requirements ?
1. Bootloader unlocked
2. Pc / laptop with windows operating system
3. Patience
Tool required
1. OST 6.0.4
https://drive.google.com/open?id=1n91aYT9Di6_v4F3Wjlv8TjfeLc64AcYA
2. Notepad ++
https://notepad-plus-plus.org/download/v7.6.6.html
3. Winrar
https://www.rarlab.com/download.htm
4. Platform tool
https://developer.android.com/studio/releases/platform-tools
5. Nokia driver
https://github.com/StollD/nokia-driver-installer/raw/master/out/Phone_Nokia_USB_Driver_v1.4.0.exe
6. nb0 unpaker
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
7. Firmware file ( Oreo 8.1 )
https://fih-firmware.hikaricalyx.com/hmd_en.html#b2n
Steps of flashing
1. Download all files from the link given
2. Extract the file B2N...... .nb0.7z/zip using
winrar
3. Then extract B2N.... .nb0 file using nb0
unpacker
4. Find .mlf file in extracted files and edit in Notepad as the value given below ?
INITOPTION = 0x20000
INITDLTYPE = 0x60
SECURITY_VER = 0x0001
And save the file
5. Run ost tool on your pc/ laptop
6. Select .mlf file on ost tool
7. Reboot your device to download mode
and connect to PC/laptop
8. Flash and wait for boot up
Note :- The process will take time
For other processes follow other guide???
Purak6 said:
Warning :- I am not responsible for any kind of your device damage like soft or
hard brick . DO IT OWN YOUR RISK
Pre- requirements
1. Bootloader unlocked
Note :- The process will take time
For other processes follow other guide
Click to expand...
Click to collapse
any method for locked devices with Developer Preview 4 running
AlahmadPR said:
any method for locked devices with Developer Preview 4 running
Click to expand...
Click to collapse
You can flash latest rom ( march full rom zip pie )
Dear users, I have a Nokia 7 plus updated to the latest fw (android 10 I guess). Because of full memory or because something else the OS doesn't start. It appears a mini recovery where It's written "impossible load the android system. Your data could be damaged.....and so on.... I have just two options:
1) Retry (obviously this option doesn't work)
2) Restore factory settings
I've some data important data inside the phone and I'd like to recover them.
Unfortunately I've never modified the recovery so I guess I've also a locked bootloader, so the TWRP isn't an option. I was thinking about download the original FW and to reinstall it Via ADB. Usually I used this method with samsung through ODIN and often it worked.
Could it works for your opinions?
Thanks for your help,
waiting for your response
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description: Flashable full realme ui firmware packages for twrp.
BE AWARE OF BACKING UP YOUR FILES, APPS AND SETTINGS BEFORE DOING THIS PROCEDURE, YOU MAY LOSE YOUR DATA.
Package Utilities: Upgrade, Downgrade, Change Region and Return to Stock Firmware.
Requirements:
- Unlocked Bootloader
- TWRP or Another custom recovery (TWRP: Download Here)
How to install: (Video Guide: Here)
1. Extract the zip package into a folder.
2. Connect your phone to your PC and move that folder to your phone.
3. Open a terminal or a command line window.
4. Run adb reboot recovery on your PC or simply hold volume down while turning power on to boot your device into the fastboot and use the volume buttons until you reach the option "Recovery mode" and press the power button.
5. In TWRP select Install
6. Use Install Image to switch to image installation mode.
7. Select SuperPartition.img from the folder that you move to the mobile.
8. Select Super partition.
9. Swipe the slider on the bottom to the right to confirm.
10. Return to the TWRP menu
11. Select Install again.
12. Select FlashablePackage.zip from the folder that you move to the mobile.
13. Swipe the slider on the bottom to the right to confirm.
14. Restart your phone and Done!
Alternative installation: (Video Guide: Here)
For those who are having problems with twrp internal storage.
Only PC
1. Extract the firmware zip package and twrp zip package into a folder, then rename the img extracted from the twrp package to twrp.img.
2. Open computer terminal in this folder and connect your device to the computer.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. In the computer terminal type fastboot flash recovery twrp.img
5. After installing go back to the device and use the volume buttons until you reach the option "Recovery mode" and press the power button.
6. In TWRP select Advanced and then ADB Sideload
7. Swipe the slider on the bottom to the right to confirm.
8. In the computer terminal type adb sideload FlashablePackage.zip
9. Wait for the installation to finish, and go back to the menu and restart in Bootloader.
10. In the computer terminal type fastboot flash super SuperPartition.img
11. Wait for the installation to finish.
12. Restart your phone and Done!
Important Note: If you are having trouble booting or want to do a clean install, you will need to go back to recovery mode, as explained earlier, and format data.
Note: after this process if you want to lock the bootloader, restart again in fastboot mode and type the command "fastboot flashing lock"
Download List:
All Files: Explorer Folder
Europe:
RUI 3.0 Android 12 C.07: Download
RUI 3.0 Android 12 C.06: Download
RUI 3.0 Android 12 C.04: Download
RUI 3.0 Android 12 C.02: Download
RUI 2.0 Android 11 A.09: Download
---------------------------
India:
RUI 3.0 Android 12 C.08: Download
RUI 3.0 Android 12 C.07: Download
RUI 3.0 Android 12 C.05: Download
RUI 3.0 Android 12 C.04: Download
RUI 2.0 Android 11 A.09: Download
---------------------------
Global (Russia, Middle East, Africa, Latin America, and other regions):
RUI 3.0 Android 12 C.07: Download
RUI 3.0 Android 12 C.06: Download
RUI 3.0 Android 12 C.04: Download
RUI 3.0 Android 12 C.02: Download
RUI 2.0 Android 11 A.02: Download
---------------------------
China:
RUI 2.0 Android 11 A.06: Download
---------------------------
DragonBall:
RUI 2.0 Android 11 A.04: Download
Great job thanks!
Fantastic
Fantastic, i will wait for global
And can you give maybe a similar very clear guide on how to install twrp ?
Magst64 said:
Fantastic, i will wait for global
And can you give maybe a similar very clear guide on how to install twrp ?
Click to expand...
Click to collapse
in the videos I give as an guide I show you how to install twrp
SrCDA said:
in the videos I give as an guide I show you how to install twrp
Click to expand...
Click to collapse
Thanks i didn't see it on the small screen, watched again on the PC and could see the commands to install twrp.
What is the difference between Europe and Global?
Similar question, how to identify the correct rom version? I'm not sure if I have EU or GLOBAL rom. I'm currently stuck at A.09 update with Rui 2.0. Already tried to force ota trough various VPNs but no luck. In engineering mode I see my country code is: XE10000
Factory version: RMX3370GDPR_11_A.09_2022031701120000
reand86 said:
Similar question, how to identify the correct rom version? I'm not sure if I have EU or GLOBAL rom. I'm currently stuck at A.09 update with Rui 2.0. Already tried to force ota trough various VPNs but no luck. In engineering mode I see my country code is: XE10000
Factory version: RMX3370GDPR_11_A.09_2022031701120000
Click to expand...
Click to collapse
GDPR is europe
SrCDA said:
Description: Flashable full realme ui firmware packages for twrp.
BE AWARE OF BACKING UP YOUR FILES, APPS AND SETTINGS BEFORE DOING THIS PROCEDURE, YOU MAY LOSE YOUR DATA.
Package Utilities: Upgrade, Downgrade, Change Region and Return to Stock Firmware.
Requirements:
- Unlocked Bootloader
- TWRP or Another custom recovery
How to install: (Video Guide: Here)
1. Extract the zip package into a folder.
2. Connect your phone to your PC and move that folder to your phone.
3. Open a terminal or a command line window.
4. Run adb reboot recovery on your PC or simply hold volume down while turning power on to boot your device into the fastboot and use the volume buttons until you reach the option "Recovery mode" and press the power button.
5. In TWRP select Install
6. Use Install Image to switch to image installation mode.
7. Select SuperPartition.img from the folder that you move to the mobile.
8. Select Super partition.
9. Swipe the slider on the bottom to the right to confirm.
10. Return to the TWRP menu
11. Select Install again.
12. Select FlashablePackage.zip from the folder that you move to the mobile.
13. Swipe the slider on the bottom to the right to confirm.
14. Restart your phone and Done!
Alternative installation: (Video Guide: Here)
For those who are having problems with twrp internal storage.
Only PC
1. Extract the firmware zip package and twrp zip package into a folder, then rename the img extracted from the twrp package to twrp.img.
2. Open computer terminal in this folder and connect your device to the computer.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. In the computer terminal type fastboot flash recovery twrp.img
5. After installing go back to the device and use the volume buttons until you reach the option "Recovery mode" and press the power button.
6. In TWRP select Advanced and then ADB Sideload
7. Swipe the slider on the bottom to the right to confirm.
8. In the computer terminal type adb sideload FlashablePackage.zip
9. Wait for the installation to finish, and go back to the menu and restart in Bootloader.
10. In the computer terminal type fastboot flash super SuperPartition.img
11. Wait for the installation to finish.
12. Restart your phone and Done!
Important Note: If you are having trouble booting or want to do a clean install, you will need to go back to recovery mode, as explained earlier, and format data.
Download List:
Europe:
RUI 3.0 Android 12 C.02: Download
RUI 2.0 Android 11 A.09: Download
---------------------------
India:
RUI 3.0 Android 12 C.04: Download
RUI 2.0 Android 11 A.09: Download
---------------------------
Global (Russia, Middle East, Africa, Latin America, and other regions):
RUI 3.0 Android 12 C.02: Download
RUI 2.0 Android 11 A.02: Soon
---------------------------
China:
RUI 2.0 Android 11 A.06: Soon
---------------------------
DragonBall:
RUI 2.0 Android 11 A.04: Download
Click to expand...
Click to collapse
Hello guys, just a question here: This Dragon Ball Rom is a global ROM or a stock Chinese ROM?
I bought a Realme Dragon Ball, but I asked to the vendor to put a Global ROM just because of Portuguese Language, but I read some articles that in the GLobal ROM all the Dragon Ball effects are lost, and I don't wanna lose it. So... I will download the Chinese Stock ROM again and use it in English.
This Dragon Ball is for the 12Gb/256 version?
Thank you everybody!
Claudinei_Silva said:
Hello guys, just a question here: This Dragon Ball Rom is a global ROM or a stock Chinese ROM?
I bought a Realme Dragon Ball, but I asked to the vendor to put a Global ROM just because of Portuguese Language, but I read some articles that in the GLobal ROM all the Dragon Ball effects are lost, and I don't wanna lose it. So... I will download the Chinese Stock ROM again and use it in English.
This Dragon Ball is for the 12Gb/256 version?
Thank you everybody!
Click to expand...
Click to collapse
esta versão é chinesa, não tem rom do dragonball global, oque muda da versão do dragonball e qualquer outra versão é o tema do launcher, e qualquer rom server para qualquer realme gt neo 2.
I am on A08 update, I recently unloked this device bootloader, flashed indian rom RUI 3.0 but the device touchscreen not working so I have flashed A08 Global
It fixed this issue. I relocked this device bootloader and still not received RUI 3.0 but some people inside our country is receiving RUI 3.0
Anyway, I have permission to unlock this bootloader again.
Flashing this RUI 3.0 will never brick my device?
Anyone confirm please
Which regions have realme dialer and meseges instead of google? I know that Russia and China or any other?
Nurujjamanpollob said:
I am on A08 update, I recently unloked this device bootloader, flashed indian rom RUI 3.0 but the device touchscreen not working so I have flashed A08 Global
It fixed this issue. I relocked this device bootloader and still not received RUI 3.0 but some people inside our country is receiving RUI 3.0
Anyway, I have permission to unlock this bootloader again.
Flashing this RUI 3.0 will never brick my device?
Anyone confirm please
Click to expand...
Click to collapse
No issue, i flashed it
luki2411 said:
Which regions have realme dialer and meseges instead of google? I know that Russia and China or any other?
Click to expand...
Click to collapse
Same question
Oyebittu said:
No issue, i flashed it
Click to expand...
Click to collapse
Thanks. I flashed it and it's working. I have flashed RUI 3.0 EU VERSION.
Will I able to receive future OTA update?
I relocked the Bootloader.
Nurujjamanpollob said:
Thanks. I flashed it and it's working. I have flashed RUI 3.0 EU VERSION.
Will I able to receive future OTA update?
I relocked the Bootloader.
Click to expand...
Click to collapse
Yes, OTA will come
Oyebittu said:
Same question
Click to expand...
Click to collapse
i checked and indonesia also has realme dialer and messages
Thanks for the guide! One cuestion, i will recieve a european version of gt neo 2, if i install indonesia firmware to gain call recording can i lock bootloader without problem to give access to bank app and OTA?
Only need call recording. Thanks in advance.
lecitron said:
Thanks for the guide! One cuestion, i will recieve a european version of gt neo 2, if i install indonesia firmware to gain call recording can i lock bootloader without problem to give access to bank app and OTA?
Only need call recording. Thanks in advance.
Click to expand...
Click to collapse
yes you can lock bootloader after changing region, and ota it works normally.
* I am not responsible for bricked devices, dead SD cards. You are choosing to follow this thread, and you are responsible for any mess !Requirements:
- Windows 8.1 or above 64-bit with Admin rights (Windows 10 64 bit recommended)
- Python Installed
- Original USB Cable provided by Realme
- At least 10GB of internet
Steps:
1. Download the tools attached below
2. In Driver/cdc-acm folder you will find cdc-acm.inf, right click and install it (You need to disable core isolation from windows security settings, if enabled)
3. Install libusb-win32-devel-filter-1.2.6.0.exe
4. Open libusb-filter-tool
5. Connect your device to your pc while pressing and holding volume up, volume down button together
6. You will see Mediatek USB PORT (COM X), select and install it and disconnect your device (Switch off your device in case, it turned on)
7. Now extract the firmware (which is in zip file), you will see a .ofp in the extracted files, use oppo_decrypter tool (link below) to extract the ofp file
8. Open SP Flash tool which is provided below and select MT6853 Scatter from wherever you extracted the ofp file, after that you need to uncheck opporeserve, special_preload, my_custom, cdt engineering
9. (USE Download only option) click on download button
10. Open MTKMETAUtility.exe and select Disable Auth
11. Connect your phone in the same USB port and with same method as above
12. SP Flash Tool should start flashing the device, after the flashing is done, disconnect and press power-button for 10+ secs to reboot, it will reboot into recovery
13. Make sure to Format Data (Yes, not wipe data, use FORMAT DATA), it should reboot automatically after you will press ok
14. Done !!!!
Downloads:
-Drivers (CSC-acm and libusb-win32-devel-filter)
-MTKMETAUTILITY
-Python
-Firmware (Realme Narzo 30 pro 5G) (Android 10)
-oppo_decrypt_tool
Is there a video version or an updated version of this tutorial? I'm with my Q2 (rmx2117) brick
the touch is not working in recovery mode
MTKMETAUTALITY is not working
AK_8K said:
MTKMETAUTALITY is not working
Click to expand...
Click to collapse
Try this one: MTK META UTILITITY: Mega
XeeXa said:
Is there a video version or an updated version of this tutorial? I'm with my Q2 (rmx2117) brick
Click to expand...
Click to collapse
You can follow these steps but try using the chinese firmware (Realme Q2), Sorry, I do not have any video tutorial for this.
I am trying to use Android Studios to Flash a custom OS onto my Razer 2.
The Razer does not connect to Wi-fi and does not have a sim card inside, so I am trying to use a workaround for the Playstore and install the CPU app to retrieve the correct Platform information from my phone. This way I can download the right Gapps File (ARM or ARM x64). and load TWERP so I can flash the ROM.
So:
1. Install Zip Archive App on Razer 2 Via android studios
2. Install CPU APK on Razer 2 Via SDK Toolkit and use Zip app on Razer to extract APK and fully install CPU on Razer
3. Check Razer Processor Architecture (ARM or ARM x64)
4. Install Gapps file and ROM
5. Boot in recovery mode and boot up TWERP
6. Use Twerp to wipe phone and install ROM and Gapps
Is there a guide on XDA forums to find out how to install APKs via USB C (Android -> PC, PC -> Android) ? I am super new to using the SDK Toolkit and it's all foreign to me.
If anyone knows where to find the platform information on phone without CPU app, please let me know. I would love to skip these steps if there is a way to do so under phone info.
I do not want to google it in case the site is incorrect. I also want to learn how to look for it on my own.
Thanks again!