Samsung Galaxy Tab 2 Error 7 TWRP Lineage OS - Galaxy Tab 2 Q&A, Help & Troubleshooting

I accidentally installed espressowifi build on my Samsung Tab 2 P5100. It works although the audio,youtube videos, and camera won't work. Then, I tried flashing an espresso3g Lineage OS then error 7 popped out saying "This ROM is not built for your device" (something like that). I looked at the build info of my device and its written that it has changed to espressowifi build. Any way to fix this?

Which version of LineageOS in particular are you trying to flash?

Lineage OS 14 - Nougat Android 7.1.2.

HippoInWindow said:
Which version of LineageOS in particular are you trying to flash?
Click to expand...
Click to collapse
IDK what I did but my Tab is 3G version. I downloaded the Wi-Fi version and flashed it in my Tablet. It booted up and it works. Then issues came up, no sounds, cant play videos, and camera is not accessible. I then looked at the build and it was changed to espressowifi so when I tried installing the other compatible ROM with my device, it does not work. Because when I installed the espressowifi ROM, it also did change the build info of my device. So what can I do to fix it?

I did go there

SoIomon said:
IDK what I did but my Tab is 3G version. I downloaded the Wi-Fi version and flashed it in my Tablet. It booted up and it works. Then issues came up, no sounds, cant play videos, and camera is not accessible. I then looked at the build and it was changed to espressowifi so when I tried installing the other compatible ROM with my device, it does not work. Because when I installed the espressowifi ROM, it also did change the build info of my device. So what can I do to fix it?
Click to expand...
Click to collapse
Wipe all than in TWRP, than reboot in TWRP again, after that use SD-card to flash the right vesion

i think the lineage os ROM is buggy not really because of what I did. I will change to a more stable ROM. XDA Devs here say that go with OMNI ROM.

SoIomon said:
i think the lineage os ROM is buggy not really because of what I did. I will change to a more stable ROM. XDA Devs here say that go with OMNI ROM.
Click to expand...
Click to collapse
For stability use RessurectionRemixOS 5.7.4 and don't use gapps. Gapps are pure trouble on prehistoric tab 2.

Ah, it did not work. Prolly gonna go back to stock ROM and back up my Custom ROM

I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD.

SoIomon said:
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD.
Click to expand...
Click to collapse
Wtf kingroot malware you recommended. Shuuush.. DONT USE THAT [email protected] KING ROOT..
Install official ROM from odin,
Boot once, than go back to download mode,
Connect tab to odin and flash TWRP.
Boot to TWRP and wipe all than install custom ROM + magisk.. reboot to system
And viola all done.

I used it but ok. if its a malware, then use an antivirus. idc what you say, this is what i did.

i mean, you dont need a rooted phone for twrp recovery but thats what i did so shush. lmao. why so mad.

SoIomon said:
I used it but ok. if its a malware, then use an antivirus. idc what you say, this is what i did.
Click to expand...
Click to collapse
Lol antivirus lmao malware in system lool
Good luck! When a virus get as root in system, no antivirus cant delete it. And Antiviruses on android suc.ks as h3ll.
Be carefull what you'll install on your device.
Mad?? I'm not mad but confused by your method lol. So complicated for nothing lool.

drnightshadow said:
Lol antivirus lmao malware in system lool
Good luck! When a virus get as root in system, no antivirus cant delete it. And Antiviruses on android suc.ks as h3ll.
Be carefull what you'll install on your device.
Mad?? I'm not mad but confused by your method lol. So complicated for nothing lool.
Click to expand...
Click to collapse
u find it, when your phone is rooted, you can delete it.

then sorry, this is what I did. its your freedom if you want to follow. theres no virus on my system so idk what are you saying but ok. then just tell them not to install kingroot. i just installed it cause i wanted to. wtf is ur problem. this is my choice lmao

Related

[Q] Odin3: checkboxes are disabled

Hi there,
I got a brand new Galaxy Note 10.1 this weekend and tried to get my hands dirty on rooting it just yesterday. So I got Odin3, CWM and SuperSU, installed Samsung Kies and thought I were good to go. Unfortunately, after doing what some guides tell me to do, I'm still on official device status.
Before I go into detail: I had to manually edit the Odin3 INI file to force the device NOT to auto reboot after flashing the CWM - the checkboxes in Odin3 were disabled and greyed out. Can someone explain why and if that might be the cause of my problems?
HoPi` said:
Hi there,
I got a brand new Galaxy Note 10.1 this weekend and tried to get my hands dirty on rooting it just yesterday. So I got Odin3, CWM and SuperSU, installed Samsung Kies and thought I were good to go. Unfortunately, after doing what some guides tell me to do, I'm still on official device status.
Before I go into detail: I had to manually edit the Odin3 INI file to force the device NOT to auto reboot after flashing the CWM - the checkboxes in Odin3 were disabled and greyed out. Can someone explain why and if that might be the cause of my problems?
Click to expand...
Click to collapse
Download a clean copy of Odin and install .
Auto Reboot is normal .
Root and Recovery TWRP
http://forum.xda-developers.com/showthread.php?t=1851548
Root and Recovery CWM
http://forum.xda-developers.com/showthread.php?t=1831173
jje
Thanks, but that didn't help either. Auto-Rebooting brings me back to stock, device state official. I tried to install CWM-SuperSU-v0.99.zip manually via CWM, but a reboot later it's still "official" and apps that need root access either run forever ("checking...") or freeze the tablet. But since this is getting off topic, I might be better off asking in other threads.
Thanks anyway!
HoPi` said:
Thanks, but that didn't help either. Auto-Rebooting brings me back to stock, device state official. I tried to install CWM-SuperSU-v0.99.zip manually via CWM, but a reboot later it's still "official" and apps that need root access either run forever ("checking...") or freeze the tablet.
Click to expand...
Click to collapse
Then you are not understanding instructions .
What is your intention .
Root or flash a stock rom .
Root via either method i posted .
Stock rom direct flash tar file via Odin.
ODIN flash is a tar not a zip.
Custom rom via a rooted phone with recovery zip file from ext sd card or sd card .
jje
Come on, the instructions are pretty clear boot in Odin Mode, click a button in Odin, let it restart, finished. The SuperSU zip file is from another guide, where the tar-file didn't include it. So I tried to manually install it via CWM (I think it was 6.0.2.7 or 8), but that didn't work either. Whenever the device reboots, Root Checker Basic runs for a few minutes and says "Sorry, the device does not have proper root access". If it helps, I used this guide:
http://www.android-hilfe.de/root-cu...ly-root-fuer-anfaenger-n8000-n8010-n8020.html
Even though it's in german, the screenshots are pretty obvious.
Sorry never ever seen any method with those sort of instructions.Personally not a clue what they mean .
I have used two methods as posted to root note 4 or 5 times. Rooted standard Samsung phones with cwm and root hundreds of times without any of those instructions.
Even run one standard cwm root via Odin to allow a specific rom install followed by a reroot using TWRP this afternoon .
jje
Sent from my GT-N8010 using xda premium
Thanks to Darkman, I finally got it. The problem was the current firmware update from Samsung. I reflashed with the version from January, followed his tutorial (like I did before - wow, after doing this 3-4 times, it certainly becomes second nature), and BAM, the device is rooted. Thanks anyway JJegan

Baffled about my Tab 2

I have a Galaxy Tab 2 7.0 gt3113. It is rooted,and I want to install a rom. The factory rom/kernel lags...get stuck ....and with all I have read the roms out there make a big difference. But I'm having a problem....I'm using rom manager and rom toolbox and I cant seem to install a rom. It load the rom whether from the computer or the download option but when it boot into recovery I get an error saying that the sd card is not found and I just end up manually re-booting the device....Ive tried this a few times choosing different things at the screen...a(abd....cashe....external storage....) it all ends up the same.....anyone have any idea what this means? I'm learning as I go....and was thinking about un-rooting my device then rooting it again.....maybe I did something wrong?
Complety bewildered....
Speedy8311 said:
I have a Galaxy Tab 2 7.0 gt3113. It is rooted,and I want to install a rom. The factory rom/kernel lags...get stuck ....and with all I have read the roms out there make a big difference. But I'm having a problem....I'm using rom manager and rom toolbox and I cant seem to install a rom. It load the rom whether from the computer or the download option but when it boot into recovery I get an error saying that the sd card is not found and I just end up manually re-booting the device....Ive tried this a few times choosing different things at the screen...a(abd....cashe....external storage....) it all ends up the same.....anyone have any idea what this means? I'm learning as I go....and was thinking about un-rooting my device then rooting it again.....maybe I did something wrong?
Complety bewildered....
Click to expand...
Click to collapse
if you are able to boot into recovery then please wipe cache partition and do a factory reset and then try to revert to stock rom
Speedy8311 said:
But I'm having a problem....I'm using rom manager and rom toolbox
Click to expand...
Click to collapse
For starters, stay away from ROM Manager! It's known to cause different sorts of problems on different devices while installing CWM and ROMs. I have only good things to say about ROM Toolbox in terms of tweaks and utilities, but never used it for ROM installation, and would suggest not to. Just download the ROM you want from its original source, put it on internal or external storage, and flash using your recovery (my personal all-time favourite is PhilZ Touch CWM, not sure what you are using). Do the proper wipes before flashing (full wipe is always recommended, especially between stock and CM/AOSP ROMs. Make sure you also flash other possibly applicable components (depends on the ROM and your preferences) -- gapps, kernel, etc. See if it works that way. I just don't see any reason to use 3rd-party apps for "ROM management" -- the simpler the process, the better.
I'm going to try to put a new rom on the tab tonight without using a program,i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Speedy8311 said:
I'm going to try to put a new rom on the tab tonight without using a program,i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Click to expand...
Click to collapse
Power+Volume up
This is the screen I get....what do I press? I know its a silly question but this IS where I was at and getting the could not find sd card error
Speedy8311 said:
i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Click to expand...
Click to collapse
Speedy8311 said:
This is the screen I get....what do I press? I know its a silly question but this IS where I was at and getting the could not find sd card error
Click to expand...
Click to collapse
You are in recovery... To get to download mode on P31xx for using Odin you need to press and hold Volume DOWN + Power.
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Speedy8311 said:
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Click to expand...
Click to collapse
I think you need to do some research.
http://forum.xda-developers.com/showthread.php?t=1900055
Speedy8311 said:
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Click to expand...
Click to collapse
Man, that sounds scary! You really need to do some reading on the basics, before you screw something up.
You can flash ZIP files from recovery, including ROMs, kernels, recoveries, and apps. However, you need Odin, a PC connection, and a download mode on your tab in order to flash things like official ROM packages (typically in tar.md5 format).
If you want to flash the ROM in zip format, you can do that in recovery. In general, if you have problems doing that, your other option is Odin and a stock ROM; then you can start over.
Looking closely at your photo, you have a stock recovery. You can only flash signed zips from it, which means you won't be able to flash custom ROMs or kernels. I would suggest to start with flashing a custom recovery (look up PhilZ Touch CWM, it's the best). This will make things easier for you.
P.S.: Sorry, didn't mean to sound harsh... It seems things got a bit confusing in the process, so questions and answers didn't really line up...
well ....I have been doin a lot of research,maybe too much lol....but the only thing I can get outta all of it is that to flash a kernel or rom or both I need to go into recovery(power and up volume) and do a wipe of the cashe and install.....then it seems to trail off there with a ok now your done go enjoy....
I cant seem to find any kinda description of what happens in between the wiping of the cashe/devlick and the install...I keep ending up in the recovey section wheather I use rom manager rom toolbox or just me following directions. I will say this though.....I do not see the cwm logo in the recovery....I stiil have the android and he lays there dead then does a quick flash to an error message then I get the menu....but there is no "mount and storage" and "backup and restore" option for me to choose from I put the tab into recovery mode and took a picture....its in the previous post.
I am still using the stock rom and kernel btw....Im not sure if I have mentioned that. I havnt been able to flash anything.
Speedy8311 said:
I am still using the stock rom and kernel btw....Im not sure if I have mentioned that. I havnt been able to flash anything.
Click to expand...
Click to collapse
Yeah, I got that. Sorry for the confusion! I updated my previous post, take a look. Stock recovery seems to be your problem here.
No harm done lol I appreciate all the help.....I'm a bit new at this,but I learn quick. Ok....I may be putting CWM or pfilze wrong way on my tab I loaded it from the play store,along but when I rooted tab I'm 99% positive that I installed CWM also . when I plug it into the computer I can see a clockwork folder.do I neeed to use odin to install philz?
is there a specific PhilZ Touch for the tab 2? or can I just download it to the computer and send it to my tab via odin?
Speedy8311 said:
when I rooted tab I'm 99% positive that I installed CWM also . when I plug it into the computer I can see a clockwork folder.do I neeed to use odin to install philz?
Click to expand...
Click to collapse
Not sure exactly what and how you did previously, but the fact is that you've got a stock recovery now. You need a custom recovery - it doesn't have to be PhilZ, even though I strongly recommend it. You can install standard CWM, too, no problem with that. To install PhilZ, you either need CWM to be already installed, or you need to use Odin.
For details and install instructions on PhilZ CWM, look here:
http://forum.xda-developers.com/showthread.php?t=2202667
Oh, BTW, as an alternative to Odin, look up the Mobile Odin by Chainfire on Play Store. It allows you to flash Odin packages from your device directly. Very useful tool! Free version will do, but the paid one has more features.
Speedy8311 said:
is there a specific PhilZ Touch for the tab 2? or can I just download it to the computer and send it to my tab via odin?
Click to expand...
Click to collapse
Yes, there is. Look in the thread I linked above.
Yep.....i got it stuck in forever boot using mobile odin.... Uugggh....I'm gonna return everything to stock and re-root it.....what ever I did the first time rooting and installing cwm I must a missed a step or something. I'll repost my progress when I'm back to stock and rooted properly
MERRY CHRISTMAS EVERYONE!!!!
YAY!!! Merry Christmas to me!!! I unrooted and repaired my tab 2 7.0 . I also re-rooted it and installed philztouch and everything is installed properly this time. Funny thing though.....after I got the tab working and before I re-rooted it...I tried to do the factory update to 4.2.2 ,since now I'm only on 4.1.1,it said that I had the latest updates available and my apps and phone list didn't auto load like when I first got my tab....hhhmmmm...anyways it works now and all root stuff and twrp is properly :highfive::highfive: only one more question...now that TWRP is working....when I want to download a kernel or rom do I leave it in Zipped form when I put it on the tab and the tab unzips it and flashs it or do I unzip it? .....sorry for all the basic questions but ya cant learn unless you ask questions
Thanks for every ones help with my Tab 2!!!
Speedy8311 said:
YAY!!! Merry Christmas to me!!! I unrooted and repaired my tab 2 7.0 .
Click to expand...
Click to collapse
Well, congrats, and merry Christmas! A bit confused - are you using PhilZ CWM, or TWRP?
As for zip files, leave them as they are, don't unzip - the recovery will install them. Just a suggestion - whenever possible, especially for large files like complete ROMs, verify the MD5 checksum to make sure your file is not corrupt during download.
just went into recovery and it says Philz touch 6

[Q] help upgrading from 4.1 to 4.3/4

ok guys, stupid question time. i have been out of the hacking game for a while and havent been keeping up with the S3 since i was running a pretty stable version of cyanogenmod. i picked up a S5 last month and the S3 has just been sitting but the wifes phone is on its last leg so i figured i would update the S3 and give it to her since it would be an upgrade to what she has now. i was running CM 4.1.2 and tried to flash the 4.3 AllianceRom. did my usual, updated CWM, downloaded the rom, checked the MD5, flashed the new modem and rom using CWM and everything looked good. then it happened. stuck at the "galaxy SIII" logo screen. nothing got me out of it. wiped everything, tried a reinstall, downloaded the rom again and did an install, nothing. tried another rom and the install failed, tried another rom and again, install failed. so i had a copy of cleanrom 5.6 which is a 4.1.1 rom and damn if that didnt hand as well. so i did a battery pull and luckly it had installed and the phone actually booted up and into android. the only downside is for some reason i cant connect to wifi with the rom. so, i still want to try either 4.3 or 4.4 on this phone so the question is, WTF am i doing wrong that it wont boot? shouldnt i be able to go from 4.1.1 to 4.3 or 4.4 by just using CWM? help a brother out.
Make sure u cwm is the most recent
Sent from my SCH-I535 using XDA Premium 4 mobile app
Mylt1 said:
ok guys, stupid question time. i have been out of the hacking game for a while and havent been keeping up with the S3 since i was running a pretty stable version of cyanogenmod. i picked up a S5 last month and the S3 has just been sitting but the wifes phone is on its last leg so i figured i would update the S3 and give it to her since it would be an upgrade to what she has now. i was running CM 4.1.2 and tried to flash the 4.3 AllianceRom. did my usual, updated CWM, downloaded the rom, checked the MD5, flashed the new modem and rom using CWM and everything looked good. then it happened. stuck at the "galaxy SIII" logo screen. nothing got me out of it. wiped everything, tried a reinstall, downloaded the rom again and did an install, nothing. tried another rom and the install failed, tried another rom and again, install failed. so i had a copy of cleanrom 5.6 which is a 4.1.1 rom and damn if that didnt hand as well. so i did a battery pull and luckly it had installed and the phone actually booted up and into android. the only downside is for some reason i cant connect to wifi with the rom. so, i still want to try either 4.3 or 4.4 on this phone so the question is, WTF am i doing wrong that it wont boot? shouldnt i be able to go from 4.1.1 to 4.3 or 4.4 by just using CWM? help a brother out.
Click to expand...
Click to collapse
You need to use the latest PhilZ Touch Recovery (https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/) (just flash it in your current recovery). It is the best, and it works great. I would first go to "Wipe Data/Factory Reset" and choose to "Clean to Install a New ROM." Then I would go into "Advanced" and wipe dalvik cache. Then I would go into "Mounts and Storage" and format boot and modem. Then I would flash the newest modem (http://www.mediafire.com/download/v0als76t6nmtpbo/DNE1.modem.zip). Then finally install your ROM and then GApps.
yes, CWM was updated just before flashing. i installed the recommended modem for the rom i was installing. not sure why it was stuck at the logo on 4.3 when i flashed a 4.1.1 rom and it booted right up just fine.
resolved. thanks guys.
Mylt1 said:
resolved. thanks guys.
Click to expand...
Click to collapse
Curious to know what you had to do to get it working?
I have two (2) S3's that I need to update and they're both running 4.1.1 ROMs.
Any info would be much appreciated.
CenFlo said:
Curious to know what you had to do to get it working?
I have two (2) S3's that I need to update and they're both running 4.1.1 ROMs.
Any info would be much appreciated.
Click to expand...
Click to collapse
i used the Philz touch CWM found here, http://forum.xda-developers.com/showthread.php?t=2201860 worked like a charm.
jonny30bass said:
You need to use the latest PhilZ Touch Recovery (https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/) (just flash it in your current recovery). It is the best, and it works great. I would first go to "Wipe Data/Factory Reset" and choose to "Clean to Install a New ROM." Then I would go into "Advanced" and wipe dalvik cache. Then I would go into "Mounts and Storage" and format boot and modem. Then I would flash the newest modem (http://www.mediafire.com/download/v0als76t6nmtpbo/DNE1.modem.zip). Then finally install your ROM and then GApps.
Click to expand...
Click to collapse
I did all of the above and I can't get anything to work....
I updated to Philz, updated the modem and went to install a new ROM and it's error'ing out every time?
This phone was rooted from way back and it appears that I may have lost root... It's stuck at the Samsung Galaxy S III boot screen and I'm trying to get it to boot in to recovery at this time.
Edit: Was able to get in to recovery and restoring a backup now. Somethings not right when trying to go to a newer ROM.
CenFlo said:
I did all of the above and I can't get anything to work....
I updated to Philz, updated the modem and went to install a new ROM and it's error'ing out every time?
This phone was rooted from way back and it appears that I may have lost root... It's stuck at the Samsung Galaxy S III boot screen and I'm trying to get it to boot in to recovery at this time.
Edit: Was able to get in to recovery and restoring a backup now. Somethings not right when trying to go to a newer ROM.
Click to expand...
Click to collapse
Did you update to the latest version? If your on an old version and attempt to flash a 4.4 rom you will get a status 7 error everytime
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
ShapesBlue said:
Did you update to the latest version? If your on an old version and attempt to flash a 4.4 rom you will get a status 7 error everytime
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
I thought I updated to the latest Phliz and I do believe that's the error I was getting when I tried to load the ROM.
I'll check again Monday.
I appreciate the info.
The issue was with Philz.
I upgraded to the latest TWRP and loaded the new ROM fine.

P5113 root, recovery, rom questions

Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
try these roms.
rocketfans14 said:
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
Click to expand...
Click to collapse
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Zte blade l said:
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Click to expand...
Click to collapse
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Not much difference.
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
rocketfans14 said:
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Click to expand...
Click to collapse
it is not necessary to unloack bootloader for tab 2 as it comes with a unlocked bootloader from stock.
Zte blade l said:
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
Click to expand...
Click to collapse
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
rocketfans14 said:
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
Click to expand...
Click to collapse
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...?
Tab 2 has got marshmallow.
Zte blade l said:
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...��
Tab 2 has got marshmallow.
Click to expand...
Click to collapse
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
billysam said:
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
Click to expand...
Click to collapse
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
rocketfans14 said:
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
Click to expand...
Click to collapse
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
Did you clear dalvik cache in recovery before flashing rom?
Zte blade l said:
Did you clear dalvik cache in recovery before flashing rom?
Click to expand...
Click to collapse
Yes, I cleared the top four options in recovery, and formatted data before flashing.
billysam said:
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
Click to expand...
Click to collapse
That's what I did. Let me just briefly summarize what I have done:
used odin with twrp
booted into recovery and made back up
cleared dalvik, cache, system, and data, formatted data
flashed update supersu, booted into system and checked root with root checker
rebooted into recovery, cleared dalvik, cache, system, and data, formatted data again
flashed cm12.1 and gapps, rebooted but ran into bootloop at splash screen
rebooted into recovery and restored back up
So I'm rooted and on stock 4.2.2 currently.
champ1919 said:
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Click to expand...
Click to collapse
I did.
Try flashing blisspop or slimLP.

Rooting S4 GT-i9505

Hello XDA.So here is the story:I had Android 5.0.1 and I rooted it with CF-Auto Root File and I had normal recovery.Everytime I entered in recovery or rebooted my phone I couldn't use my phone (all the apps crashing) so everytime it happened I factory reseted the device.I found the solution:Flashed ClockWork Recovery and went to recovery and pressed reboot and the recovery fixed it.So the problem was the root..About a week ago I flashed CrDroid Marshmallow ROM which is awesome I dont have any problem with it.All the apps r working fine battery is fine etc but I want to root it.I opened XDA and i saw SuperSu beta.I think it will work for me but the problem is that it needs to be flashed with twrp
The questions are:
Is SuperSu Beta going to work for me?
If yes,if I flash twrp and flash supersu beta is the problem in Android 5.0.1 going to appear again (i mention it in the story) cuz if yes i dont know if twrp is going to fix the problem like ClockWork Recovery?
If no,how fo u suggest to root my phone?
Thanks
Sory for the longggg story and everything
And sorry for my english cuz idk if its good I livve in a non english speaking country and im only 14.
Custom roms are already rooted.
CM roms have root access options in the developer settings.
You can flash supersu if you want, but I recommend the stable version.
Also, clockworkmod is an outdated recovery. TWRP is recommended for newer roms 5.0+
GDReaper said:
Custom roms are already rooted.
CM roms have root access options in the developer settings.
You can flash supersu if you want, but I recommend the stable version.
Also, clockworkmod is an outdated recovery. TWRP is recommended for newer roms 5.0+
Click to expand...
Click to collapse
Thank you u made my day now that im thinking i came across the root option when i turned off animations and other stuffs for better speed but I didnt payed attention lol
Now the problem I had on Lollipop is gone?
So that means I can flash the TWRP?
r3i-al said:
Thank you u made my day now that im thinking i came across the root option when i turned off animations and other stuffs for better speed but I didnt payed attention lol
Now the problem I had on Lollipop is gone?
So that means I can flash the TWRP?
Click to expand...
Click to collapse
If TWRP doesn't work you can always return to clockworkmod.
GDReaper said:
If TWRP doesn't work you can always return to clockworkmod.
Click to expand...
Click to collapse
So hello again, I backed up my recovery (clockworkmod) in case something bad happened but it all went good I now have TWRP and everything is great.Thanks I really appreciate your help.

Categories

Resources