Related
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
rrhutch said:
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
Click to expand...
Click to collapse
i have the same problm :crying:
Need more info than that.
For example... Are you rooted or stock?
If rooted, there are a couple of reasons off hand I can think of you could be having a problem.
If you're stock, well... All I can think of is wave your hands in the air, and wave them like you just don't care. Pretty sure that won't fix the problem though, but if it does, report back! xD
I'm rooted.
Sent from my DROID RAZR using xda app-developers app
exactly the same problem
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
I'm in the same situation.
I'm going to try http://forum.xda-developers.com/showthread.php?t=1849994
when I get home tonight to see if this fixes it.
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
ytdong said:
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
Click to expand...
Click to collapse
you should've sync your snote data with drive or dropbox!!! any firmware update 101 is to back up all your data
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Thank you! but I've been on stock recovery so I never flashed cwm or made a cwm backup. How can I restore to a backup after I flash the cwm recovery?
Nefariouss said:
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Click to expand...
Click to collapse
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
khanh1289 said:
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Click to expand...
Click to collapse
ytdong said:
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
Click to expand...
Click to collapse
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
This worked for me as well. Thanks a lot, Vincent9756!:good:
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Worked for me. Thanks!
rrhutch said:
Worked for me. Thanks!
Click to expand...
Click to collapse
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Kikoshi said:
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Click to expand...
Click to collapse
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Z a p i x said:
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Click to expand...
Click to collapse
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Kikoshi said:
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Click to expand...
Click to collapse
Yeah, there will most certainly be kernel and recovery uploads.
the only issue you might run into is CWM not sticking. If it doesn't reflash CWM in ODIN with reboot unchecked. Then after you flash it, boot into CWM. When you select reboot, it should offer to prevent stock recovery from replacing it.
and you're welcome, glad to help
Guys u might think this is a dumb question but how do i flash stock recovery with odin like were do insert the file i know how tp put in dl mode and get my comp to see my tab in odin and i did flash the prerooted injected stock uealgb recovery to get root i just dont know were to put the files in odin some help would be greatly appreciated, cause i need to flash this first before i do the ota update correct ? If not i will bootloop ? So rootkeeper alows me to keep root acess after ota? Thanks guys
Sent from my GT-N8013 using xda app-developers app / jelly powered samsung infuse 4g
I have a samsung galaxy tab 2 10.1 gt-p5113
I tried to root it before, but got as far as flashing the recovery software ( can't find the thread I used to do this but I think it involved odin)
anyways when I flashed the recovery software the tab got stuck at the boot screen and I though it was bricked but after reflashing and restarting it a few times it worked again....needless to say I didn't have the balls to try rooting it after that.....
now when I search for software updates it says my device has been modified and cannot update ( it still is NOT rooted )
Is this because of the recovery software?...which as far as I can tell hasn't been properly installed cause I can't find any evidence of it on my tab, even when i hold down the power and volume button and the recovery software is supposed to show up.
and how do i undo it so that I can get updates? I just want the stock software back. will a factory reset do the trick?
No, the instant you attempted to install CWM, a bootloader data value changed that made your device always read as modified. There are three ways to get to Jelly Bean from where you are.
1. Root and run TriangleAway. This app will reset the bootloader counter, so you should be able to upgrade normally.
2. Install CWM via ODIN and install a custom JB-based ROM. You will need to root first if you want to keep your data via Titanium Backup.
3. ODIN a JB-based ROM for your carrier/region. Same deal as above with rooting and keeping your data.
Posted from my Fascinate using XDA Premium
MultipleMonomials said:
No, the instant you attempted to install CWM, a bootloader data value changed that made your device always read as modified. There are three ways to get to Jelly Bean from where you are.
1. Root and run TriangleAway. This app will reset the bootloader counter, so you should be able to upgrade normally.
2. Install CWM via ODIN and install a custom JB-based ROM. You will need to root first if you want to keep your data via Titanium Backup.
3. ODIN a JB-based ROM for your carrier/region. Same deal as above with rooting and keeping your data.
Posted from my Fascinate using XDA Premium
Click to expand...
Click to collapse
I have this same exact problem. I have tried to un-root but nothing happned. I have tried to update via Kies and nothing happened. Should I try to root again? I just want to get the 4.2.2 update.
If you want your device's status to read "official",
1. Root your device (I prefer Chainfire autoroot)
2.a) Run triangle away, reset your bin (flash) counter. Now your bootloader will say 0 counts.
2.b) As for the device status (in about device), there's a button just under "reset" in triangle away application, tap it and reboot. Your device status will now be "official"
3. (Optional) Go to your Superuser application, tap cleanup and unroot (if available)
Now you're unrooted, and running official firmware. You can use OTA anytime.
So i did something stupid right after rooting my Relay. I deleted basic stock files that are necessary for the phone to function properly. I was able to copy them from my current phone (rooted T-Mobile G2/Desire Z) onto an SD card and in turn push them back onto my Relay. My problem is that I still get error messages constantly after boot up and the simplest tasks can take hours (not to mention I can't use phone, contacts, messaging). I have seen all over the web (and XDA) about unrooting the phone and retuning it to stock. I was thinking that I could unroot, then reroot my Relay and that will solve my problem.
I was all set to unroot when I encountered yet another issue. Samsung-updates.com and sammobile both direct you to download the firmware files from hotfile. Hotfile has been shut down due to copyright infringement. Where I can find the stock firmware files now that hotfile has been shut down?
Please help me as I anxiously await using my new phone without the extra bloatware!
Thank you,
RockinRita
RockinRita said:
I was all set to unroot when I encountered yet another issue. Samsung-updates.com and sammobile both direct you to download the firmware files from hotfile. Hotfile has been shut down due to copyright infringement. Where I can find the stock firmware files now that hotfile has been shut down?
Click to expand...
Click to collapse
Would Samsung's Kies software be able to restore it to stock, or is it too far gone for Kies to work?
Bobby Tables said:
Would Samsung's Kies software be able to restore it to stock, or is it too far gone for Kies to work?
Click to expand...
Click to collapse
Without the stock files wouldn't Kies be pointless?
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Pushing on a Relay
RockinRita said:
So i did something stupid right after rooting my Relay. I deleted basic stock files that are necessary for the phone to function properly. I was able to copy them from my current phone (rooted T-Mobile G2/Desire Z) onto an SD card and in turn push them back onto my Relay.
Click to expand...
Click to collapse
I did a very similar thing to my Relay and I can only get it boot off of the SD card. I am curious how you performed the push. I assumed that you
used adb push, but how?
Thanks,
Lou
scopedial said:
I did a very similar thing to my Relay and I can only get it boot off of the SD card. I am curious how you performed the push. I assumed that you used adb push, but how?
Thanks,
Lou
Click to expand...
Click to collapse
I copied the files from my rooted HTC Desire Z/ T-Mobile G2 to a spare SD card I have and then I inserted that card into my Relay and started it up. It took me a few hours to get passed all the error messages that constantly pop up. And then I went into my files, external SD and moved the files over to the system folder on the Relay. After several reboots, the error messages still are coming up which I why I need to unroot it and reroot it.
Magamo said:
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Click to expand...
Click to collapse
You may have just saved me, Magamo! Thank you for saving them to Drive! Once I get on my old slow Dell laptop (i'm on my Chromebook now- which unfortunately doesn't support most things) I'll try to flash your files and update you here since I cannot comment on your post as I have not posted enough myself.
Stock ROM Restore Method I Used
Magamo said:
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Click to expand...
Click to collapse
You could also use Odin to flash a md5 sum of T699UVBMC5_HOME using the download mode of the Relay. Place in PDA, and tick off the Auto Reboot and F. Reset Time and hit start. Make sure you have the drivers required to do this. I think they're included with Kies. In my case, I used CWM to format /system, then I used download mode. However, I had to reset my device. AND CWM (plus root access) was erased after the stock restore. I didn't miss an important detail, did I?
furboom1240 said:
You could also use Odin to flash a md5 sum of T699UVBMC5_HOME using the download mode of the Relay. Place in PDA, and tick off the Auto Reboot and F. Reset Time and hit start. Make sure you have the drivers required to do this. I think they're included with Kies. In my case, I used CWM to format /system, then I used download mode. However, I had to reset my device. AND CWM (plus root access) was erased after the stock restore. I didn't miss an important detail, did I?
Click to expand...
Click to collapse
I'll be honest, you've got me on this one. I've never used ODIN, and am not well versed in its use. But yes, this is sounds like a more technical way of doing it without the CWM flashables I've mentioned. -- Impossible in some situations. For example, my fiancee's phone's USB port has died for all purposes other than charging, So if I'm to send it in for a warranty repair, I'll have to use the method I posted.
Confused here
Magamo said:
The easiest way I've found to completely revert to stock, is to get a CWM flashable version of the unmodified stock rom (From the straight system image, not an update.zip reformated image) and a CWM flashable version of the stock recovery. Flash those in. If you want to reset your flash counter, make certain to also flash a su binary of some form (I personally prefer SuperSU, since it's so easy to clear out, run triangle away, then uninstall your su app properly.
http://forum.xda-developers.com/showpost.php?p=48581775&postcount=6
I've just put up recovery and system flashables of Stock JB.
Click to expand...
Click to collapse
Magamo,
I'm sorry, but I'm still totally confused here. Not sure how to flash the files in. I downloaded Kies and both of the zip files from your post. Successfully updated the firmware and my error messages are gone, but I don't have CWM on it. I extracted your files, but now what? I'm not very technologically inclined so this is all Greek to me.
furboom1240 said:
You could also use Odin to flash a md5 sum of T699UVBMC5_HOME using the download mode of the Relay. Place in PDA, and tick off the Auto Reboot and F. Reset Time and hit start. Make sure you have the drivers required to do this. I think they're included with Kies. In my case, I used CWM to format /system, then I used download mode. However, I had to reset my device. AND CWM (plus root access) was erased after the stock restore. I didn't miss an important detail, did I?
Click to expand...
Click to collapse
furboom,
What is T699UVBMC5_HOME? How do I get the md5 sum of it? How do I use CWM to format /system? How do I get to stock restore? Again, I'm sorry for asking so many questions, i just have no clue what I'm doing here.
Thanks,
Rockin Rita
RockinRita said:
Magamo,
I'm sorry, but I'm still totally confused here. Not sure how to flash the files in. I downloaded Kies and both of the zip files from your post. Successfully updated the firmware and my error messages are gone, but I don't have CWM on it. I extracted your files, but now what? I'm not very technologically inclined so this is all Greek to me.
furboom,
What is T699UVBMC5_HOME? How do I get the md5 sum of it? How do I use CWM to format /system? How do I get to stock restore? Again, I'm sorry for asking so many questions, i just have no clue what I'm doing here.
Thanks,
Rockin Rita
Click to expand...
Click to collapse
If you don't have CWM, or some other custom recovery running on this, how did you get root in the first place? The easiest way to get root is to use heimdall or ODIN to flash CWM or another custom recovery, then flash Superuser or SuperSU using your new custom recovery.
The .zip files I linked are only meant to be flashed through recovery. Not Kies, not ODIN, not any other method.
Got it!!
With the help of this site (http://www.celldekho.com/how-to-unroot-samsung-galaxy-s-relay-4g/) and the file it linked to on rapidshare, along with your tip Magamo, I was able to unroot my Relay successfully. I'll reroot it later when I have the time and make sure not to delete important files LOL Thanks so much for the help!
Hello All,
First, I apologize for the fact that I am a long time (years) lurker and this is my first ever post. I have prior experience with rooting and installing custom roms on my samsung moment, moto droid (original), HTC droid incredible, moto droid X, samsung fascinate, samsung galaxy nexus, and samsung galaxy s4. All were successful with minimal issues. Here's my current issue...
I have had my S5 for several months and finally decided to root it. My first attempt was to leave it on the stock 4.4.4 OTA that I had and attempt to Odin CF-Auto Root. This resulted in a "FAIL" during the flash at the cache.img.ext4 phase. Subsequently I tried every version of Philz and TWRP I could find with the same failure.
Then I did an Odin of full ANK that I found on SamMobile's site. This was successful. So I tried ALL of those recoveries on top of that flash. All failed. I tried reflashing the whole tar ball in between and I tried several recoveries back to back without the tar ball in between. I tried it both ways.
Then I flashed the new NKD build that is out there. This was successful. Then I tried every single on of those recoveries (including CF-Autoroot) on top of that an all failed. In between EVERY one, I have tried flashing back the full NKD tar ball.
I even tried the packages that someone put out which include the firmware and either Philz or TWRP. I tried both. Both FAIL in the same way on Odin.
Now when I try to go back to the ANK tar ball, it hangs in a boot loop on first boot. I don't care, I don't want ANK, I am just sharing the facts. It's back on the NKD leak now.
Every flash is done on my macbook pro running windows 7 in WM ware fusion. It's always done by entering download mode from a battery pull.
I have also tried repartitioning during some of these flashes with a PIT file I downloaded. NONE of this helped. My phone runs with the NKD leak on it, but I want root and I want a custom recovery.
My goal is to have a custom recovery and full root so I can go back to flashing custom roms. Yes I have already tripped my knox counter, and no, I don't mind. Can anyone help me get this thing rooted with a custom recovery on it?
Thanks in advance!
Use heimdall for mac or find a real Windows pc if you want to use odin.
That's right, I forgot to mention, I tried Heimdall to flash just the recovery and that fails too!
Since we've had a couple new firmwares and lots of other stuff going on in the last several weeks, I've probably used Odin 30 or 40 times so I'm thinking a cable or try a different pc.
And by the way, when I run the command as follows:
heimdall flash --recovery recovery.img --cache cache.img
I get the following:
Downloading device's PIT file...
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
I HAVE tried another cable, but not another computer. No idea why it would flash full tar balls fine, but not work with just a recovery... EVER.
In terms of Odin, I should also mention that I have tried 3.07, 3.09 and 3.10. I tried to troubleshoot everything that I thought could be the culprit.
I understand that you're pc won't work with all tars & that a different pc may not be an option. If you are somehow able to flash ne5, you can follow the steps below without using computer the rest of the process to get root & custom recovery. I've done this method on 3 S5s so it's a sure thing & takes less than 5 mins after your on the ne5 bootloader.
1. flash ne5 full tar with odin
2. download towel root, install and run to gain root (Make it rain)
3. Install supersu from play store
4. Install flashify from play store, grant root access
5. Download recovery IMG (Make sure it's IMG and not tar or zip) twrp here >> http://techerrata.com/browse/twrp2/klte
6. Open flashify for root users and select recovery image, navigate to twrp or philz custom recovery you downloaded and flash within the app
7. Open supersu and follow steps to update binaries, phone will boot to recovery and complete the update then reboot automatically
8. Enjoy your rooted device and flash away!
This is awesome and worked perfectly. I had thought about trying to do something of this nature, but could not have pieced it together so flawlessly. How do I send a donation your way?
The last issue is now I am on NE5 baseband. Is there any way to get to ANK or later?
syntheticreality said:
This is awesome and worked perfectly. I had thought about trying to do something of this nature, but could not have pieced it together so flawlessly. How do I send a donation your way?
The last issue is now I am on NE5 baseband. Is there any way to get to ANK or later?
Click to expand...
Click to collapse
I'm no dev so I don't have a donation link set up. I do have a PayPal account I'll pm to you. I'm glad I was able to help get you up and running, I know what it's like. I have a Mac myself and no pc but was always afraid to try running a vm. Good to know that it's an option now
Sounds good. I figure I ought to buy to you a beer for the help!
I like beer ?
Glad you solved you problem. Its shows like you was downloading from rwilco12 site. All are bad.
Also if you want to try Philz, these is the real link.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/klte/
Sent from my SM-G900P
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
try these roms.
rocketfans14 said:
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
Click to expand...
Click to collapse
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Zte blade l said:
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Click to expand...
Click to collapse
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Not much difference.
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
rocketfans14 said:
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Click to expand...
Click to collapse
it is not necessary to unloack bootloader for tab 2 as it comes with a unlocked bootloader from stock.
Zte blade l said:
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
Click to expand...
Click to collapse
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
rocketfans14 said:
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
Click to expand...
Click to collapse
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...?
Tab 2 has got marshmallow.
Zte blade l said:
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...��
Tab 2 has got marshmallow.
Click to expand...
Click to collapse
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
billysam said:
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
Click to expand...
Click to collapse
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
rocketfans14 said:
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
Click to expand...
Click to collapse
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
Did you clear dalvik cache in recovery before flashing rom?
Zte blade l said:
Did you clear dalvik cache in recovery before flashing rom?
Click to expand...
Click to collapse
Yes, I cleared the top four options in recovery, and formatted data before flashing.
billysam said:
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
Click to expand...
Click to collapse
That's what I did. Let me just briefly summarize what I have done:
used odin with twrp
booted into recovery and made back up
cleared dalvik, cache, system, and data, formatted data
flashed update supersu, booted into system and checked root with root checker
rebooted into recovery, cleared dalvik, cache, system, and data, formatted data again
flashed cm12.1 and gapps, rebooted but ran into bootloop at splash screen
rebooted into recovery and restored back up
So I'm rooted and on stock 4.2.2 currently.
champ1919 said:
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Click to expand...
Click to collapse
I did.
Try flashing blisspop or slimLP.