Related
So I updated to 5.0 lollipop via ADB flash a couple days ago, and I realized that without xposed + root, I really cannot stand this phone... I need the simplicity that xposed gives me to make using my phone much easier.
So now, I want to downgrade back to 4.4.4 KitKat. Has anyone here tried? What I tried was downloading the 4.4.4 factory images, extracted it, and edited the flash-all.bat file and removed the "-w" command to save my data. It flashes fine, but then the phone is stuck in the boot animation and doesnt get past that.
Has anyone here successfully DOWNGRADED and KEPT THEIR DATA intact? Would appreciate it a lot!
blackdragon12 said:
So I updated to 5.0 lollipop via ADB flash a couple days ago, and I realized that without xposed + root, I really cannot stand this phone... I need the simplicity that xposed gives me to make using my phone much easier.
So now, I want to downgrade back to 4.4.4 KitKat. Has anyone here tried? What I tried was downloading the 4.4.4 factory images, extracted it, and edited the flash-all.bat file and removed the "-w" command to save my data. It flashes fine, but then the phone is stuck in the boot animation and doesnt get past that.
Has anyone here successfully DOWNGRADED and KEPT THEIR DATA intact? Would appreciate it a lot!
Click to expand...
Click to collapse
I personally haven't tried that. But 5.0 does have roottt and hopefully eventually xposed
blackdragon12 said:
So I updated to 5.0 lollipop via ADB flash a couple days ago, and I realized that without xposed + root, I really cannot stand this phone... I need the simplicity that xposed gives me to make using my phone much easier.
So now, I want to downgrade back to 4.4.4 KitKat. Has anyone here tried? What I tried was downloading the 4.4.4 factory images, extracted it, and edited the flash-all.bat file and removed the "-w" command to save my data. It flashes fine, but then the phone is stuck in the boot animation and doesnt get past that.
Has anyone here successfully DOWNGRADED and KEPT THEIR DATA intact? Would appreciate it a lot!
Click to expand...
Click to collapse
You would need to wipe cache and Dalvik for sure. System apps may need data wipes, too. Play by ear.
cgibbons51 said:
I personally haven't tried that. But 5.0 does have roottt and hopefully eventually xposed
Click to expand...
Click to collapse
yes. I did root it and it worked well. However, one of my company apps that I have to use on my phone detects my phone is rooted and won't open.... Xposed had a module (root cloak) to hide the fact that I had root for that app so it worked
Aerowinder said:
You would need to wipe cache and Dalvik for sure. System apps may need data wipes, too. Play by ear.
Click to expand...
Click to collapse
Are there any side effects to wiping cache and Dalvik? If I get stuck on a bootloop again would I have issue flashing 5.0 back if I wipe that?
Sent from my Nexus 5 using XDA Free mobile app
Just flash factory images. You'll be in for some hair pulling if you try to boot your saved data. Why do people try to do these crazy moves..
beekay201 said:
Just flash factory images. You'll be in for some hair pulling if you try to boot your saved data. Why do people try to do these crazy moves..
Click to expand...
Click to collapse
That isn't a solution to my problem. I know I can just wipe everything and flash the images again, but the point here is I want to save my data and apps and not have to setup my phone again (thus the topic title, I want to keep my data)
Sent from my Nexus 5 using XDA Free mobile app
Did you take a nandroid before flashing? You can use TiBU to extract the apps and data from that.
krs360 said:
Did you take a nandroid before flashing? You can use TiBU to extract the apps and data from that.
Click to expand...
Click to collapse
Biggest mistake, no I didnt
Worst case I am stuck with 5.0 lollipop until there is a version of Xposed for ART... or if I can figure out how to use the company app on a rooted device.
I sincerely doubt your phone settings for 5.0 will be compatible with 4.4.x
You will have to wipe. If you're rooted, you can at least restore user apps and data but the android settings, you'll have to do yourself.
blackdragon12 said:
Biggest mistake, no I didnt
Worst case I am stuck with 5.0 lollipop until there is a version of Xposed for ART... or if I can figure out how to use the company app on a rooted device.
Click to expand...
Click to collapse
Seeing as you can't use Xposed, what do you need root for?
rootSU said:
I sincerely doubt your phone settings for 5.0 will be compatible with 4.4.x
You will have to wipe. If you're rooted, you can at least restore user apps and data but the android settings, you'll have to do yourself.
Click to expand...
Click to collapse
I can easily root the device again. What do you mean if I am rooted in can restore user apps and data? How would I back those up and restore? Are you referring to using something like titanium backup?
Thanks.
Sent from my Nexus 5 using XDA Free mobile app
blackdragon12 said:
I can easily root the device again. What do you mean if I am rooted in can restore user apps and data? How would I back those up and restore? Are you referring to using something like titanium backup?
Thanks.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yes. Not "like". Exactly that.
You can use Helium as well (which doesn't require root)
rootSU said:
Yes. Not "like". Exactly that.
Click to expand...
Click to collapse
Okay. Will look into it.
EddyOS said:
You can use Helium as well (which doesn't require root)
Click to expand...
Click to collapse
Thanks. Rooting isn't an issue so I don't mind titanium since it's more comprehensive I think.
I still want to see if there's an easier way to flash back...
Sent from my Nexus 5 using XDA Free mobile app
blackdragon12 said:
Okay. Will look into it.
Thanks. Rooting isn't an issue so I don't mind titanium since it's more comprehensive I think.
I still want to see if there's an easier way to flash back...
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
There's not. Wipe, flash factory images, restore apps + user data. That's your only option.
_MetalHead_ said:
There's not. Wipe, flash factory images, restore apps + user data. That's your only option.
Click to expand...
Click to collapse
Ah... guess ill do it at some point this week then..
_MetalHead_ said:
There's not. Wipe, flash factory images, restore apps + user data. That's your only option.
Click to expand...
Click to collapse
Just wanted to update everyone.
I used titanium backup to save all my apps+appdata and then flashed 4.4.4 via ADB. Then flashed TWRP and used CF-Auto-Root to root my phone.
Everything is right in my world of android again. 4.4.4, rooted, and no restrictions. Thanks all!
blackdragon12 said:
Just wanted to update everyone.
I used titanium backup to save all my apps+appdata and then flashed 4.4.4 via ADB. Then flashed TWRP and used CF-Auto-Root to root my phone.
Everything is right in my world of android again. 4.4.4, rooted, and no restrictions. Thanks all!
Click to expand...
Click to collapse
Any fix for the pesky OTA System Update notification?
I'm dying for 4.4.4 but cant stand that annoying update notification.
And I can't get rid of it without wakelocks.
Funny enough I haven't gotten the notification for Ota update yet... Maybe because I used cf auto root to root the phone and it modifies the kernel I think.
Sent from my Nexus 5 using XDA Free mobile app
justiiin said:
Any fix for the pesky OTA System Update notification?
I'm dying for 4.4.4 but cant stand that annoying update notification.
And I can't get rid of it without wakelocks.
Click to expand...
Click to collapse
I too am staying with kitkat. I disabled notification in "Google Play Services". Where do I go to see if I'm getting wakelocks?
News :
Starting today, i'll just upload the firmware if it has a change in it.
So you know there's no need to update the firmware if there's no change in it, save the hassle.
Tips :
* I've added checksum file for each firmware-only files in google drive, so you guys can see what's changed on every firmware-only release.
* If you experience sim card not detected after flashing firmware, don't worry, it's normal. do this, plug out and plug in your sim card tray, and restart your device.
[FIRMWARE-ONLY]
Recommended : 9.2.21
Latest : 9.2.21
https://drive.google.com/drive/folders/1PGmzEcmgG0XhRB7110CDDTgMwmw4N3MM
[ROMS - CHINA]
http://www.miui.com/download-323.html
[ROMS - GLOBAL]
http://en.miui.com/download-317.html
yep i believe the Miui10 is in Alpha and currently being tested by a closed group of users. we should see public Beta releases towards the end of June.
Im just curious if there is any difference in battery consumption to previous version of MIUI.
I've tried it a couple of days ago. There are some visual changes like new notifications panel UI, recents UI, In-call UI etc. A bit more IOS-ish as some say.
First of all, if you consider flashing it;
- You need the Raupe/Blunden twrp to flash it, other recoveries end up with error 7.
- After flashing this build; twrp will ask for a decrypt password and no password will be correct. So your internal storage won't be mounted on twrp no way to fix it at the moment.
- Magisk 16.4 is able to root it, don't know about previous ones.
- If you consider flashing other roms, you have to do factory reset(format data) to get your internal be able to mount on twrp again.
- It doesn't have google apps as it's China specific, so you need to install google apps manually by Google installer apk or there are zip files for miui 10 ported gapps which give force closes randomly.
- Can be a daily driver since all is working.
- Xposed won't work.
Other than these hick ups, it's good initial build. Fast and smooth, can't tell about battery life since I haven't used it for a long time. There are secondary releases(8.6.5) for some devices so can be around for Mix too. Cheers.
Sent from my Xiaomi Mi Mix using XDA Labs
Konstantine34 said:
I've tried it a couple of days ago. There are some visual changes like new notifications panel UI, recents UI, In-call UI etc. A bit more IOS-ish as some say.
First of all, if you consider flashing it;
- You need the Raupe/Blunden twrp to flash it, other recoveries end up with error 7.
- After flashing this build; twrp will ask for a decrypt password and no password will be correct. So your internal storage won't be mounted on twrp no way to fix it at the moment.
- Magisk 16.4 is able to root it, don't know about previous ones.
- If you consider flashing other roms, you have to do factory reset(format data) to get your internal be able to mount on twrp again.
- It doesn't have google apps as it's China specific, so you need to install google apps manually by Google installer apk or there are zip files for miui 10 ported gapps which give force closes randomly.
- Can be a daily driver since all is working.
- Xposed won't work.
Other than these hick ups, it's good initial build. Fast and smooth, can't tell about battery life since I haven't used it for a long time. There are secondary releases(8.6.5) for some devices so can be around for Mix too. Cheers.
Click to expand...
Click to collapse
I'm willing to give this a shot, thanks for the input ??
Ok trying it now and everything seems to be working good. A little laggy at the moment so I'm just letting it set in. I was hoping the camera would've gotten updated but same old crappy camera software from previous MIUI firmware. Hopefully when they do release the final version we'll get a updated camera but all in all this is a keeper till we get updated version on here, hopefully...
juggaknot77 said:
Ok trying it now and everything seems to be working good. A little laggy at the moment so I'm just letting it set in. I was hoping the camera would've gotten updated but same old crappy camera software from previous MIUI firmware. Hopefully when they do release the final version we'll get a updated camera but all in all this is a keeper till we get updated version on here, hopefully...
Click to expand...
Click to collapse
Have face unlock maybe?
zrzatore said:
Have face unlock maybe?
Click to expand...
Click to collapse
Haven't tried that but I'll look into it today and report back.
---------- Post added at 04:27 PM ---------- Previous post was at 03:36 PM ----------
Ok going through settings and as far as I can tell I don't see face unlock feature. I highly doubt the mix will get seeing as how old it is now, I never use it anyway on other devices so it's not a big deal to me. Everything is running very smooth and fast, I'm liking the Android P style look a lot, more than how it looks on the pixel but that's just me.
How did you go past decrypt after flashing via TWRP?
Wmateria said:
How did you go past decrypt after flashing via TWRP?
Click to expand...
Click to collapse
You just cancel it and internal storage will be unable to use on twrp. If you flash other things, you need to do it by an OTG.
Sent from my Xiaomi Mi Mix using XDA Labs
Konstantine34 said:
You just cancel it and internal storage will be unable to use on twrp. If you flash other things, you need to do it by an OTG.
Click to expand...
Click to collapse
Oh yes yes, I always use OTG just in case. Thanks for the info.
I installed it, but I keep loosing the recovery, when I reboot it goes to the Miui recovery.
Is there a way to disable the factory recovery overwriting the twrp.
Appreciate any help.
Thanks.
Konstantine34 said:
You just cancel it and internal storage will be unable to use on twrp. If you flash other things, you need to do it by an OTG.
Sent from my Xiaomi Mi Mix using XDA Labs
Click to expand...
Click to collapse
doesn't it will be solved just by formatting data?
fatouraee said:
I installed it, but I keep loosing the recovery, when I reboot it goes to the Miui recovery.
Is there a way to disable the factory recovery overwriting the twrp.
Appreciate any help.
Thanks.
Click to expand...
Click to collapse
i think you should flash this file in twrp :
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
after that the recovery shouldn't get replaced anymore.
That's weird I don't have any issues seeing my storage in TWRP, everything works.
juggaknot77 said:
That's weird I don't have any issues seeing my storage in TWRP, everything works.
Click to expand...
Click to collapse
really? can you show us the screenshot of the storage in twrp? what twrp version did you use? what other procedure did you perform in order not to encrypt storage? thanks
Thanks. That seems to have worked.
fatouraee said:
I installed it, but I keep loosing the recovery, when I reboot it goes to the Miui recovery.
Is there a way to disable the factory recovery overwriting the twrp.
Appreciate any help.
Thanks.
Click to expand...
Click to collapse
You need to delete
- system/etc/recovery-resource.dat
- system/bin/install-recovery.sh
- system/recovery-from-boot.p
rhong said:
really? can you show us the screenshot of the storage in twrp? what twrp version did you use? what other procedure did you perform in order not to encrypt storage? thanks
Click to expand...
Click to collapse
Honestly I didn't do anything different, followed the instructions on the 1st post, everything works on my end.
juggaknot77 said:
Honestly I didn't do anything different, followed the instructions on the 1st post, everything works on my end.
Click to expand...
Click to collapse
i think he should need to format his Data and Internal Storage.
i can't remember the detail, but i once encountered this too, and i read that something about F2FS not supported or whatsoever.
heindrix said:
i think he should need to format his Data and Internal Storage.
i can't remember the detail, but i once encountered this too, and i read that something about F2FS not supported or whatsoever.
Click to expand...
Click to collapse
It's weird I didn't format anything, just updated twrp, backed up my rom, wiped everything, installed new miui 10, installed magisk, wiped cache and dalvik and everything works perfectly...
I am having an issue work my car stereo connecting to "media audio" on my phone. The phone always connects and media audio works fine with all other Bluetooth devices except my car. I can get it to work after the stereo says no connection I toggle media audio and then it connects. It used to auto connect no problem. Any help would be appreciated.
Stereo: Standard 2015 Mitsubishi Outlander Sport
ROM: OOS 10 Stable
Phone Mods: FDE.AI, rooted, bootloader unlock
Magisk modules: Oxytweaker, Google dialer framework, YouTube vanced
I had a similar issue suddenly appear. The first saved Bluetooth device auto connected. None of the others would. Couldn't figure out what to do. In the end I rebooted to TWRP and restored.
RogerNZ said:
I had a similar issue suddenly appear. The first saved Bluetooth device auto connected. None of the others would. Couldn't figure out what to do. In the end I rebooted to TWRP and restored.
Click to expand...
Click to collapse
Were you on 10?
jac0b said:
Were you on 10?
Click to expand...
Click to collapse
Yes, 10.0 with xxxNoLimits
To get the Bluetooth to work right will I need to downgrade back to 9.5.11
RogerNZ said:
Yes, 10.0 with xxxNoLimits
Click to expand...
Click to collapse
What are you running now the same 10.0
10.0.1 with xxxNoLimts
RogerNZ said:
10.0.1 with xxxNoLimts
Click to expand...
Click to collapse
I have updated to 10.0.1 and same issue could you know I am doing wrong i don't use xXx or custom kernel but would like to use 10
SirFronts said:
could you know what I am doing wrong
Click to expand...
Click to collapse
No sorry, I wish I could. But I am not clever with phones.
I restored system. That did not fix it.
I restored vendor. That did not fix it.
I restored data. That fixed it.
It doesn't make sense to me. But that is what I did.
I hope someone else more knowledgeable than you or I can chip into the conversation here.
RogerNZ said:
No sorry, I wish I could. But I am not clever with phones.
I restored system. That did not fix it.
I restored vendor. That did not fix it.
I restored data. That fixed it.
It doesn't make sense to me. But that is what I did.
I hope someone else more knowledgeable than you or I can chip into the conversation here.
Click to expand...
Click to collapse
How do you just restore data I may try that after work today
Thank you not a lot of people will even give me new ideas other then reinstall it or going thru and resetting my Bluetooth, WiFi and mobile data
Or deleting cache and storage under the Bluetooth app
SirFronts said:
How do you just restore data
Click to expand...
Click to collapse
TWRP > Restore > Data
Of course, if you have not previously backed up Data in TWRP, then it will not be possible.
With regards to all those other suggestions you mentioned, none of them worked for me. But if you have not yet tried them, I would still suggest you do.
Good luck!
RogerNZ said:
TWRP > Restore > Data
Of course, if you have not previously backed up Data in TWRP, then it will not be possible.
With regards to all those other suggestions you mentioned, none of them worked for me. But if you have not yet tried them, I would still suggest you do.
Good luck!
Click to expand...
Click to collapse
Bet so I should do a back up of my 9.5.11 and the update to 10.0.1 keep root and then use twrp hit restore and just restore the data right
SirFronts said:
Bet so I should do a back up of my 9.5.11 and the update to 10.0.1 keep root and then use twrp hit restore and just restore the data right
Click to expand...
Click to collapse
There is no point in restoring Data unless your backup was done prior to the issue arising.
If you already have 9.5.11 System, Vendor and Data backed up, and you know at the time of back up there were no Bluetooth issues - then yes restore that. But I don't know the process to downgrade like that. If you are successful in that, then you should be able to upgrade from there afterward. Hopefully without further Bluetooth error.
But I need to remind you. I am not good with phones and can't be sure restoring Data is what actually worked. It doesn't make sense to me that it would.
RogerNZ said:
There is no point in restoring Data unless your backup was done prior to the issue arising.
If you already have 9.5.11 System, Vendor and Data backed up, and you know at the time of back up there were no Bluetooth issues - then yes restore that. But I don't know the process to downgrade like that. If you are successful in that, then you should be able to upgrade from there afterward. Hopefully without further Bluetooth error.
But I need to remind you. I am not good with phones and can't be sure restoring Data is what actually worked. It doesn't make sense to me that it would.
Click to expand...
Click to collapse
No I understand I've already downgraded and upgraded and downgraded the software a few times so I think I got that under control but yeah I'll try restoring data after I update because Bluetooth works on the 9.5.11 update no problem
Thank you again
RogerNZ said:
There is no point in restoring Data unless your backup was done prior to the issue arising.
If you already have 9.5.11 System, Vendor and Data backed up, and you know at the time of back up there were no Bluetooth issues - then yes restore that. But I don't know the process to downgrade like that. If you are successful in that, then you should be able to upgrade from there afterward. Hopefully without further Bluetooth error.
But I need to remind you. I am not good with phones and can't be sure restoring Data is what actually worked. It doesn't make sense to me that it would.
Click to expand...
Click to collapse
Just wanted to update restoring my data put me in a bootloop it's cool IDK what it could be
I don't have this issue... I'm on OSS 10.0.1 stock
SirFronts said:
in a bootloop
Click to expand...
Click to collapse
Sorry to hear that
spinoza23 said:
I don't have this issue... I'm on OSS 10.0.1 stock
Click to expand...
Click to collapse
I'm running 10.0.1
Do you think if I install a new kernel it might start working again that's the only thing I have not tried
RogerNZ said:
Sorry to hear that
Click to expand...
Click to collapse
It happens lol but thanks for the looking out I rather try something then nothing kinda out look just thank God for the MSM Tool lmao ?
SirFronts said:
I'm running 10.0.1
Do you think if I install a new kernel it might start working again that's the only thing I have not tried
Click to expand...
Click to collapse
I don't know, but you have the same model like me...
I'm in completely stock ROM no root, no magisk, no bootloader unlocked.
My car SUV Renault Koleos 2019... Aptx, Aptx-HD works great
When I set up a new phone, usually I get a prompt to sign into google account and restore apps and data.
But in colour OS, I didn't get that.
However is there any way to manually get that ?
( I lost my previous phone (moto g4 plus) and I am hoping there is someway which will help me restore as much data as possible into this new phone (realme 5 pro) )
Settings>Other accounts>Google>Add>Sync now.
I can do this without issue. I'm from Hungary btw.
greenys' said:
Settings>Other accounts>Google>Add>Sync now.
I can do this without issue. I'm from Hungary btw.
Click to expand...
Click to collapse
Hi.
I can add the google account, but when we set up a new phone that has an experience close to the google's android, we get prompted with an option to restore the data that was backed up on our old phone.
Here I am unable to do that.
eat-food said:
Hi.
I can add the google account, but when we set up a new phone that has an experience close to the google's android, we get prompted with an option to restore the data that was backed up on our old phone.
Here I am unable to do that.
Click to expand...
Click to collapse
Hm. Yes. I remember now. I don't think we can do that on this device. I'm sure though it almost does the same that I described. Although I'd not be looking for that new device setup prompt for in China Google services isn't available. I'd say we're lucky that play store is pre-installed for devices outside China. Sorry but I don't think I can help. I'm still trying to get used to Color OS.
have you try reset to factory setting? because in my case, the first time i boot the phone, there is the option to restore data backed up on google. I dont use that tho, so i can't tell if it work or not.
but there is an option to backup or restore right above reset to factory setting, so maybe that is what you are looking for..
FireXMan said:
in my case, the first time i boot the phone, there is the option to restore data backed up on google.
Click to expand...
Click to collapse
I didn't get that option at all.
It just gives me an option to use realme's app to transfer data.
eat-food said:
I didn't get that option at all.
It just gives me an option to use realme's app to transfer data.
Click to expand...
Click to collapse
Go to Setting>additional setting>backup and reset> there is google backup option right there, i never used that tho, maybe you can restore from that
HTML:
FireXMan said:
Go to Setting>additional setting>backup and reset> there is google backup option right there, i never used that tho, maybe you can restore from that
Click to expand...
Click to collapse
No.
It only allows to back up from this phone
but doesn't restore the data from a different phone.
Hi everyone,
I have a Poco X3 Pro which currently runs Xiaomi.eu 12.5.7 and I was wondering if there was any point in updating to Xiaomi.eu 13.
First I've read that there is no recovery that actually supports Android 12, therefore I was wondering if it would be troublesome for some things, and if so, for what. And which recovery should I install, I'm currently running Orangefox which I really like.
Moreover, it seems that it runs slower than Xiaomi.eu 12.5.
Finally I always have trouble migrating to a new rom because of the factory reset needed, and I don't know any viable solution to backup my data properly. I've always lost my data, and all I was managing to save was my apps (without their data's), my contacts and sms (which sometimes didn't work properly) and my photos (ish) .
I was wondering if anyone knew of a solution to backup everything needed such as apps+datas, sms+contacts+mms, pictures and videos.
I'd like to mention that I run Xiaomi.eu mainly for the mobile data tracking features, which I couldn't find in any other non-MIUI rom, and the ui and the new control center since MIUI 12.
Thanks in advance
Ti64CLi++ said:
Hi everyone,
I have a Poco X3 Pro which currently runs Xiaomi.eu 12.5.7 and I was wondering if there was any point in updating to Xiaomi.eu 13.
First I've read that there is no recovery that actually supports Android 12, therefore I was wondering if it would be troublesome for some things, and if so, for what. And which recovery should I install, I'm currently running Orangefox which I really like.
Moreover, it seems that it runs slower than Xiaomi.eu 12.5.
Finally I always have trouble migrating to a new rom because of the factory reset needed, and I don't know any viable solution to backup my data properly. I've always lost my data, and all I was managing to save was my apps (without their data's), my contacts and sms (which sometimes didn't work properly) and my photos (ish) .
I was wondering if anyone knew of a solution to backup everything needed such as apps+datas, sms+contacts+mms, pictures and videos.
I'd like to mention that I run Xiaomi.eu mainly for the mobile data tracking features, which I couldn't find in any other non-MIUI rom, and the ui and the new control center since MIUI 12.
Thanks in advance
Click to expand...
Click to collapse
If you have a Poco x3 pro(VAYU) and use 12.5.7 Xiaomi Eu rom(custom rom not EEA stock) you can update to 13 without losing the data because now you can flash the rom with fastboot command and you can choose between 2 scripts:
"windows_fastboot_first_install_with_data_format.bat"or
"windows_fastboot_update_rom.bat"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.
https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Method/ Pc mandatory:
Download rom
open and extract rom with 7.zip or other
Phone in fastboot mode
Execute command according your Pc.(Windows,linux,Mac).
NOSS8 said:
If you have a Poco x3 pro(VAYU) and use 12.5.7 Xiaomi Eu rom(custom rom not EEA stock) you can update to 13 without losing the data because now you can flash the rom with fastboot command and you can choose between 2 scripts:
"windows_fastboot_first_install_with_data_format.bat"or
"windows_fastboot_update_rom.bat"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.
https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Method/ Pc mandatory:
Download rom
open and extract rom with 7.zip or other
Phone in fastboot mode
Execute command according your Pc.(Windows,linux,Mac).
Click to expand...
Click to collapse
Oh thanks a lot for the fast and detailed answer.
I just have one last question then, what about the recovery?
Ti64CLi++ said:
Oh thanks a lot for the fast and detailed answer.
I just have one last question then, what about the recovery?
Click to expand...
Click to collapse
Until there is one that will work the roms will flash in fastboot mode.
NOSS8 said:
Until there is one that will work the roms will flash in fastboot mode.
Click to expand...
Click to collapse
But the one I have installed will stay installed right? And there will be no other issue than the failing decryption?
Ti64CLi++ said:
But the one I have installed will stay installed right? And there will be no other issue than the failing decryption?
Click to expand...
Click to collapse
no,your rom is in android 11 not 12.
Remove security from the lock screen before flashing the rom (additional precaution) and save your data just in case.
NOSS8 said:
no,your rom is in android 11 not 12.
Remove security from the lock screen before flashing the rom (additional precaution) and save your data just in case.
Click to expand...
Click to collapse
Okay, thanks a lot for all your answers, I'll try that later tonight
Well, it worked all right.
The only downside I have found for now is a bug with mobile datas. Sometimes it turns off by itself and it is impossible to turn it back on without rebooting
Ti64CLi++ said:
Okay, thanks a lot for all your answers, I'll try that later tonight
Click to expand...
Click to collapse
Ti64CLi++ said:
Well, it worked all right.
The only downside I have found for now is a bug with mobile datas. Sometimes it turns off by itself and it is impossible to turn it back on without rebooting
Click to expand...
Click to collapse
What script did you use?
NOSS8 said:
What script did you use?
Click to expand...
Click to collapse
I used the update one for Windows, since I have Windows 11
Ti64CLi++ said:
I used the update one for Windows, since I have Windows 11
Click to expand...
Click to collapse
reset the phone.
NOSS8 said:
reset the phone.
Click to expand...
Click to collapse
Is it the only solution?
Ti64CLi++ said:
Is it the only solution?
Click to expand...
Click to collapse
This is the solution to be sure that it does not come from the update.
Post#2
"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.#
NOSS8 said:
This is the solution to be sure that it does not come from the update.
Post#2
"
For the first install,it is better to format data but update work.
Backup your data with Miphone assistant,Micloud,Google.#
Click to expand...
Click to collapse
OK thanks, I'll wait and see if it does appear again before actually formatting data
Ti64CLi++ said:
OK thanks, I'll wait and see if it does appear again before actually formatting data
Click to expand...
Click to collapse
Before formatting you can try to reset Wifi, mobile networks and bluetooth.
Settings/connect and share
Thanks I may try that, but for now I haven't had the bug again.
Also, do you know of any way to change the boot animation? I tried replacing the bootanimation.zip on my own but I can't it is read only, and even with an app such as boot animation on play store (I am rooted) it doesn't work.
I tried flashing some animation as Magisk module that I found on the Internet but nothing works
Ti64CLi++ said:
Thanks I may try that, but for now I haven't had the bug again.
Also, do you know of any way to change the boot animation? I tried replacing the bootanimation.zip on my own but I can't it is read only, and even with an app such as boot animation on play store (I am rooted) it doesn't work.
I tried flashing some animation as Magisk module that I found on the Internet but nothing works
Click to expand...
Click to collapse
Just download a theme with a boot animation, rename the theme to zip and modify the boot animation or replace it with your own.
NOSS8 said:
Just download a theme with a boot animation, rename the theme to zip and modify the boot animation or replace it with your own.
Click to expand...
Click to collapse
And where do I find a theme with boot animation? Can't I download the zip of my current theme? (which is the default one)
Ti64CLi++ said:
And where do I find a theme with boot animation? Can't I download the zip of my current theme? (which is the default one)
Click to expand...
Click to collapse
Either you look in the Miui store and you retrieve it on the phone or a google search.
Or here to modify if necessary:
https://xiaomi.eu/community/threads/custom-bootanimation.62056/#post-617545
NOSS8 said:
Either you look in the Miui store and you retrieve it on the phone or a google search.
Or here to modify if necessary:
https://xiaomi.eu/community/threads/custom-bootanimation.62056/#post-617545
Click to expand...
Click to collapse
Thanks a lot it worked alright!