No recovery - A white Exclamation mark
No fastboot mode (I think)
I had installed all USB drivers for Win_7 x32.
Phone is detected in Research Download tool, but it is stuck on waiting and checking baudrate forever.
I have the official firmware in .pac format downloaded from http://support.moulnisky.com/index.php?dir=Micromax/00_A%20Serie/A34/.
Phone is always restarting when i try to power ON it.
I think I can access ADB commands with Android Multi Tools v1.02 , but cant access fastboot commands.
Will anyone please help me out..??
Feeling screwed now..
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Hello,
I tried to flash my Alcatel ideal 4060a with custom rom following by the instructions in Thread. I got Install successful screen
but it is still booting in to TWRP recovery. when i try to reboot with bootloader option it is hanging at logo only for 30+ minutes. can anyone please help me out in this ? Thanks in advance
[email protected] said:
Hello,
I tried to flash my Alcatel ideal 4060a with custom rom following by the instructions in Thread. I got Install successful screen
but it is still booting in to TWRP recovery. when i try to reboot with bootloader option it is hanging at logo only for 30+ minutes. can anyone please help me out in this ? Thanks in advance
Click to expand...
Click to collapse
I realize this is a very old post, but in hopes that the information will be helpful to any current device owners, I'll address the question:
The AT&T Alcatel IDEAL (4060a) ships with a fully.unlocked bootloader. As such, installing TWRP custom recovery is simple to do once root of the stock OS is attained. NOTE: fastboot mode has been disabled on the 4060a by Alcatel (TCL). Trying to boot to bootloader mode from recovery or using the command
adb reboot recovery
from a terminal or command prompt will only reboot the device. Without fastboot mode, recovering a bricked device is very problematic unless the device will boot into TWRP recovery mode. From TWRP, a stock Android 5.1.1 ROM can be installed which will recover your device to its stock factory state. In the unfortunate event your device is hard bricked (unable to boot into either the OS or TWRP recovery mode), your only option is to push stock firmware to the device using a firehose programmer via Qualcomm HS-USB QDLoader (9008 mode), also known as Emergency Download Mode (EDL).
Please !!!, where do I find the "firehose programmer file" for the AT & T ALCATEL 406
AeonFlux1603 said:
I realize this is a very old post, but in hopes that the information will be helpful to any current device owners, I'll address the question:
The AT&T Alcatel IDEAL (4060a) ships with a fully.unlocked bootloader. As such, installing TWRP custom recovery is simple to do once root of the stock OS is attained. NOTE: fastboot mode has been disabled on the 4060a by Alcatel (TCL). Trying to boot to bootloader mode from recovery or using the command
adb reboot recovery
from a terminal or command prompt will only reboot the device. Without fastboot mode, recovering a bricked device is very problematic unless the device will boot into TWRP recovery mode. From TWRP, a stock Android 5.1.1 ROM can be installed which will recover your device to its stock factory state. In the unfortunate event your device is hard bricked (unable to boot into either the OS or TWRP recovery mode), your only option is to push stock firmware to the device using a firehose programmer via Qualcomm HS-USB QDLoader (9008 mode), also known as Emergency Download Mode (EDL).
Click to expand...
Click to collapse
Please !!!, where do I find the "firehose programmer file" for the AT&T ALCATEL 4060a? My Phone is hard Bricked.
Hi guys
Title explains everything really.. I get the no device with id... error when trying to flash device using newflasher. I have installed all the drivers and everything and shows perfectly fine in device manager (Android fastboot interface) forgot exact name as not near my PC rn
When using fastboot devices or fastboot reboot it works perfectly.. I can have fastboot and newflasher loaded at the same time and only fastboot.exe will recognise my phone and be functioning in fastboot mode.
I have tried to use the program on the same machine but with a different windows installation... I will try on another machine when I get home but I'm really hoping this isn't a device issue...
I have suspicion because I tried to update to latest pie version without wiping data and deleted files like fota_reset.ta and userdata.sin from the firmware folder but this actually corrupted the phone looool.. So now I'm on oreo (from a very old TWRP backup) and there's no way I can update FW or use newflasher..
avi312singh said:
Hi guys
Title explains everything really.. I get the no device with id... error when trying to flash device using newflasher. I have installed all the drivers and everything and shows perfectly fine in device manager (Android fastboot interface) forgot exact name as not near my PC rn
When using fastboot devices or fastboot reboot it works perfectly.. I can have fastboot and newflasher loaded at the same time and only fastboot.exe will recognise my phone and be functioning in fastboot mode.
I have tried to use the program on the same machine but with a different windows installation... I will try on another machine when I get home but I'm really hoping this isn't a device issue...
I have suspicion because I tried to update to latest pie version without wiping data and deleted files like fota_reset.ta and userdata.sin from the firmware folder but this actually corrupted the phone looool.. So now I'm on oreo (from a very old TWRP backup) and there's no way I can update FW or use newflasher..
Click to expand...
Click to collapse
You need FLASH MODE for Newsflasher.
Volume Down when plugging in USB
Omg lol ???
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
1st link miracle box is not working plz correct it bro
can you share download links from other providers? mega asks for premium account.
thank you.
Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.
same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith
this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot
Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.
When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?
hi community
i hope someone is still active in this nubia x section, because i hope for some help.
i flashed twrp to my nubia x with using Minimal ADB and Fastboot.
with twrp i flashed the new rom 3.21.
as i tried also to flash gaps i got in the "your device is corrupt. it can't be trusted and will not boot g.com/abh" error.
but because i still was able to flash files with Minimal ADB and Fastboot i flashed all the *.img files i found in the NX616J-update.zip to the phone.
so i was able to boot the recovery mode and flashed the original rom 3.21 with otg from usb stick.
then the nubia x booted normal to the original rom, but because the playstore wasn't working, i flashed again twrp with Minimal ADB and Fastboot.
in twrp i used all swipe and format functions because i thinked i want clean what i can to start from the beginning.
sorry i dont remeber exactly all the steps i did.
and now my problem is the phone only boot to the fastboot menu.
Minimal ADB and Fastboot seems to still work normal, i can unlock the device and flash twrp.
but after reboot i am still in the fastboot menu.
only boot do edload don't boot to fastboot, and if i boot edload i can connect the phone to my pc and with the qfil-tool i see connect:
"Qualcomm HS-USB QDLoader 9008 (COM4)
But to use qfil to flash i think i need a "MetaBuild Configuration (contents.xml)", and i can't find this file for nubia x.
i hope someone has an idea how i get my phone out of this fastboot-loop and share it here.
thanks and kind regards
hoitschau
i found the solution, thanks to rcsj.
https://forum.xda-developers.com/nubia-x/help/install-rom-stock-3-18-gapps-support-t4108715
flashing the file vbmetaDISABLED.img from the google drive with fastboot was my rescue.