I am not sure whether my mobile is Bricked or it has nothing installed in it.It is in boot loop and there is showing a triangle wit exclamatory mark in it,I think it has no recovery installed.
Mobile:-Micromax A62
I tried following idea.
1.Tried using fastboot but fastboot don't detect my phone(drivers are installed).
2.Using DownloadManager,It does not proceed after "Checking Baudrate".
3.Sp tool also don't detect it .
Please Please answer my question .
mayur42 said:
I am not sure whether my mobile is Bricked or it has nothing installed in it.It is in boot loop and there is showing a triangle wit exclamatory mark in it,I think it has no recovery installed.
Mobile:-Micromax A62
I tried following idea.
1.Tried using fastboot but fastboot don't detect my phone(drivers are installed).
2.Using DownloadManager,It does not proceed after "Checking Baudrate".
3.Sp tool also don't detect it .
Please Please answer my question .
Click to expand...
Click to collapse
you can download driver manually from this link: https://www.hard-reset.in/micromax-a62-hard-reset.html
I have drivers
There is no problem with drivers .Even though I installed drivers my phone is not detecting in fastboot devices,So i am unable to flash any recovery from fastboot or sp tool .
Hello,
I tried to flash my Alcatel ideal 4060a with custom rom following by the instructions in Thread. I got Install successful screen
but it is still booting in to TWRP recovery. when i try to reboot with bootloader option it is hanging at logo only for 30+ minutes. can anyone please help me out in this ? Thanks in advance
[email protected] said:
Hello,
I tried to flash my Alcatel ideal 4060a with custom rom following by the instructions in Thread. I got Install successful screen
but it is still booting in to TWRP recovery. when i try to reboot with bootloader option it is hanging at logo only for 30+ minutes. can anyone please help me out in this ? Thanks in advance
Click to expand...
Click to collapse
I realize this is a very old post, but in hopes that the information will be helpful to any current device owners, I'll address the question:
The AT&T Alcatel IDEAL (4060a) ships with a fully.unlocked bootloader. As such, installing TWRP custom recovery is simple to do once root of the stock OS is attained. NOTE: fastboot mode has been disabled on the 4060a by Alcatel (TCL). Trying to boot to bootloader mode from recovery or using the command
adb reboot recovery
from a terminal or command prompt will only reboot the device. Without fastboot mode, recovering a bricked device is very problematic unless the device will boot into TWRP recovery mode. From TWRP, a stock Android 5.1.1 ROM can be installed which will recover your device to its stock factory state. In the unfortunate event your device is hard bricked (unable to boot into either the OS or TWRP recovery mode), your only option is to push stock firmware to the device using a firehose programmer via Qualcomm HS-USB QDLoader (9008 mode), also known as Emergency Download Mode (EDL).
Please !!!, where do I find the "firehose programmer file" for the AT & T ALCATEL 406
AeonFlux1603 said:
I realize this is a very old post, but in hopes that the information will be helpful to any current device owners, I'll address the question:
The AT&T Alcatel IDEAL (4060a) ships with a fully.unlocked bootloader. As such, installing TWRP custom recovery is simple to do once root of the stock OS is attained. NOTE: fastboot mode has been disabled on the 4060a by Alcatel (TCL). Trying to boot to bootloader mode from recovery or using the command
adb reboot recovery
from a terminal or command prompt will only reboot the device. Without fastboot mode, recovering a bricked device is very problematic unless the device will boot into TWRP recovery mode. From TWRP, a stock Android 5.1.1 ROM can be installed which will recover your device to its stock factory state. In the unfortunate event your device is hard bricked (unable to boot into either the OS or TWRP recovery mode), your only option is to push stock firmware to the device using a firehose programmer via Qualcomm HS-USB QDLoader (9008 mode), also known as Emergency Download Mode (EDL).
Click to expand...
Click to collapse
Please !!!, where do I find the "firehose programmer file" for the AT&T ALCATEL 4060a? My Phone is hard Bricked.
Hey there... I was trying to get my OnePlus 7 -That I just bought - to a rooted Android 10, updating was the easy part but while trying to "fastboot flash boot twrp.img" I think I somehow got myself stuck making the bootloader (aka fastboot mode ) as my main thing the phone load into and now when I turn on the phone it goes straight to fastboot mode I go and try to "fastboot flash boot twrp.img" it says OKAY twice but I can't load into recovery it takws me back to the fast boot again.... Idk what to do... Help
More into:
I got to the twrp before once during the process and idk why dumb me rebooted when I couldn't access my phone files from pc I wanted to put the image of OOS on a flash drive and via OTG but once I restarted by mistake after that whatever choice I make on the fastboot screen will quickly restart and get back to the same screen, so I can do "fastboot flash boot twrp.img" successfully but I can't load to it I hit reboot to recover or Start or Reboot Bootloader nothing takes me to twrp,
Also when I try "fastboot flash recovery twrp.img"
It says sending recovery okay, writing recovery failed, (remote: (recovery_b) no such partition)
I hope to get any help and I'm sorry if it's an obvious thing I couldn't notice, I'm not the sharpest between my brothers. Momma says. ? with me. I'll appreciate it I promise.
Have you tried this Fastboot ROMS?
Use this:
https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240
After that just put offical Rom zip for your region on internal memory and after that install update. voila
Unbrick tool also available for OxygenOS pie https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325 :good:
Help
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
sourabhone said:
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
Click to expand...
Click to collapse
"sahara server" problem : disable driver signature / update drivers
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Qualcomm dr: https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
First of all twrp.img is a recovery image. You would normally use fastboot flash recovery twrp.img.
Secondly, you aren't supposed to flash twrp.img but use fastboot boot twrp.img and then boot to twrp and flash the twrp installer. If you can boot into fastboot, type fastboot boot twrp.img(twrp.70 for android q) and then flash twrp installer and oos. And if you can't boot into recovery you will have to use the msm tool.
daitalos said:
"sahara server" problem : disable driver signature / update drivers
Qualcomm dr:
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
Click to expand...
Click to collapse
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
sourabhone said:
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
Click to expand...
Click to collapse
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Thanks
daitalos said:
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : h t tp s: // forum . xda-developers . com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Click to expand...
Click to collapse
Thank you so much daitalos.
At last i was able to recover my phone from being a paperweight.Used my other laptop and it worked perfectly first time.Maybe my 1st laptop was having some issues.
Hi guys, I rooted my Tecno Y2 device in October last year. I then tried to create more space on the device by deleting some system applications including mediatek.res-apk foolishly. To cut the long story short the device got stuck in
Boot loop. It is still on stock recovery. When i connect it to a pc it displays as unknown device in device manager even after i have installed all the necessary drivers: adb & fastboot drivers, usb drivers and vcom drivers all to no avail. ADB & FASTBOOT does not detect it and so does Mtk Droid Tools. Please help me guys to restore my phone back to me. Thanks in advance.
My device - lenovo tb-7104f running on 8.1.0 oreo and mtk8167 chipset
Bootloader unlocked
My problem - i cant access recovery and not even fastboot and os is not installed on my device i can only access is preloader
Problem 2 - i dont have pc and not even my friend's have
How this happend - i got a ported twrp it worked but has touch bugs and one more bug that is whenever i boot into recovery my os automatically uninstall because my device was encrypted
So i thought to remove twrp so i rebooted into bootloader and did 'fastboot erase recovery' and after that did reboot but forgot that i dont have os and not even recovery
After that my device is just botting for 5 second showing preloader and then reboot
How u can help - please tell me any solution for this without pc or with any another android device
I also heard about that sp flash tool can work in preloader but i already said i dont have pc so is there is not any tool that works from android to android and can flash firmware through preloader?
Thanks in advance