hi,
i have a note 10.1 and i love it. i love it so much that i havent rooted it because i get the samungs updates ota when available and so on.
since 4.0 i have 4.1 and now i have 4.1.2 running on it. the stock version, not rooted to mention it once more.
but no matter which version, the volume was always very low epecially when you have it outdoors and want to watch something i hardly can hear anything.
for music its acceptable but following a audiobook or movie makes it almost impossibile (but for sure unenjoyable) to watch a movie.
now i have read that you can install apps (didnt work for me)
root your device and replace some files (i really dont want to do that)
or
use some or secret codes from the dialpad. READ here...http://forum.xda-developers.com/showthread.php?t=1069015
where it says on the bottom of the first post
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
but this code doesnt work for me. it should open a service menu, doesnt work.
can anybody please help me and tell me what is possible to higher up the volume on my device??
http://forum.xda-developers.com/showthread.php?t=2111763
Sorry I see you not rooted.. Use this but lift eq knobs to your likings...
http://forum.xda-developers.com/showthread.php?t=2146846
Sent From Samsung Galaxy Note 10.1 [N8013]
txtmikhail said:
http://forum.xda-developers.com/showthread.php?t=2111763
Sorry I see you not rooted.. Use this but lift eq knobs to your likings...
http://forum.xda-developers.com/showthread.php?t=2146846
Sent From Samsung Galaxy Note 10.1 [N8013]
Click to expand...
Click to collapse
great thanks, looks like a solution.
but i cant install this software, i would require the apk file.
the zip which i downloaded doesnt contain a apk
also i wasnt able to find this app on play store.
last but not least i am too green to post in the other forum, that is why i gotta reply here.
You need to install a custom recovery to flash this.
http://forum.xda-developers.com/showthread.php?t=2102677
You must not have read the 2nd thread because I post a apk in it..
http://forum.xda-developers.com/showthread.php?p=39324441
Sent From Samsung Galaxy Note 10.1 [N8013]
Hello, you can add sound to unlock the particle effect? In going to dump European system / media / audio / ui ... you will find the sound file .... how can I apply them?
nplnpl said:
Hello, you can add sound to unlock the particle effect? In going to dump European system / media / audio / ui ... you will find the sound file .... how can I apply them?
Click to expand...
Click to collapse
The problem is on configuration of the new effect, you can't add the sound i think because is configured to use the first sound effect, the ripple. But is possible too that it read the first because don't find the third... So, you can make a try pushing the same original S5 file on the same folder on S4 then reboot. If it don't work, if you don't think about it you can replace the first (ripple) with the new one, however i please you to upload here the new sound effects! Let we know
http://forum.xda-developers.com/showthread.php?p=51607211
Can anyone direct me here.
Used to change the 'mixer' file on Ultra to great effect.
There's no such file on the P8.
Thanks
I use this one on my P8max, it works great.
http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Hello guys and girls! This tutorial is for those who thinks the P2 has insufficient audio while wearing headphones. Note that I'm not responsible for any damage to your phone or your hearing. Just backup the files and you should be good if you accidentally manage to screw up!
[1] First step is to download a root browser (I used Solid Explorer).
[2] Navigate to /system/etc
[3] Find the file called Mixer_Paths_MTP.xml
[4] Backup the Mixer_Paths_MTP.xml so if you screw up it's just restoring the old file.
[5] Open the file using a xml editor (I used Solid Explorer's own xml editor, this is because Quickedit wouldn't let the values stay after rebooting).
[6] Navigate in the xml document and find the following values= "HPHL Volume", "HPHR Volume", "RX1 Digital Volume", "RX2 Digital Volume", "EAR PA GAIN" (The one without the 1P5 in it) and "RX3 Digital Volume" and increase the values to your liking.
[7] Reboot and enjoy your boosted volume
Optional; Do the same procedure to the file called Mixer_Paths.xml if it doesn't work solely editing Mixer_Paths_MTP.xml
thanks, will let you know once I've tried it. Its on the way currently!
Do you know which control should I modify for a microphone volume boost?
picofish said:
Do you know which control should I modify for a microphone volume boost?
Click to expand...
Click to collapse
Sry pal I actually don't know which values are modifying the mic :/
Or just install V4A or Dolby Atmos?? You need root for this of course.
911-Future_Maker said:
Or just install V4A or Dolby Atmos?? You need root for this of course.
Click to expand...
Click to collapse
I made a thread earlier about Viper4Android being insufficient in boosting the volume. Hence this guide allows you to boost your sound even further. ?
Thanks for the info.
Or just install Kodi and play your media through that,it has a built in software amplifier
Indigoeyes said:
Hello guys and girls! This tutorial is for those who thinks the P2 has insufficient audio while wearing headphones. Note that I'm not responsible for any damage to your phone or your hearing. Just backup the files and you should be good if you accidentally manage to screw up!
[1] First step is to download a root browser (I used Solid Explorer).
[2] Navigate to /system/etc
[3] Find the file called Mixer_Paths_MTP.xml
[4] Backup the Mixer_Paths_MTP.xml so if you screw up it's just restoring the old file.
[5] Open the file using a xml editor (I used Solid Explorer's own xml editor, this is because Quickedit wouldn't let the values stay after rebooting).
[6] Navigate in the xml document and find the following values= "HPHL Volume", "HPHR Volume", "RX1 Digital Volume", "RX2 Digital Volume", "EAR PA GAIN" (The one without the 1P5 in it) and "RX3 Digital Volume" and increase the values to your liking.
[7] Reboot and enjoy your boosted volume
Optional; Do the same procedure to the file called Mixer_Paths.xml if it doesn't work solely editing Mixer_Paths_MTP.xml
Click to expand...
Click to collapse
In step 3 which of the following values do I need to increase?
Thanks
abhayruparel said:
In step 3 which of the following values do I need to increase?
Thanks
Click to expand...
Click to collapse
RX1 Digital Volume, RX2 Digital Volume, RX3 Digital Volume all which I believe are set to 83 from the beginning and EAR PA GAIN which I believe is set to POS_6_DB from the beginning My personal setting is set to RX1, RX2, RX3 = 93 and POS_15_DB
Does this work even when one uses headphone in conversation to hear the other person? I mean using an headset with headphones and microphone.
is this working after resetting the phone ?
or u should do it again ?
Well, for me it acutally doesn't work at all @Stock deodexed ROM (s244). Changing any values the aforementioned XML causes the phone to not give me any sound at all - even after rebooting.
Changing the values back doesn't help either, the only way to reset the problem is to reflash or to replace the file with the backed up version. Seems rather strange, but well.
Phone has to be rooted in order so make changes in the .xml file, right?
Yes, because you can't edit the file without root access. You can open and read it, but editing is impossible.
hi man，How to increase Ringtone volume（Speaker volume）？
my phone is China Mobile N2，cpu is Qualcomm 625，
/etc/mixer_paths.xml,
mixer_paths_mtp.xml,
mixer_paths_qrd_sku3(h,hf,i,m,n).xml,
mixer_paths_skuk.xml,
mixer_paths_wcd9306(9326,9330,9335).xml
Which file should I modify?
and What data to modify?
Please give me some guidance if you have time，thanks
OK, so one thing I did notice while testing the volume boost (which works fine on Lineage OS) is that the noise floor rises significantly when boosting the volume.
Listening with bigger headphones like my DT880s is possible then, yes, but you notice that the sound lacks body and depth, the amp in the P2 just isn't powerful enough to drive them adequately. I'm usually not someone who believes in audio voodoo, but it is really noticeable here.
And then, In-ears just sound awful because the noisefloor is constantly hearable.
So, in the end I reverted back to the normal state because I listen to In ears way more and the disadvantages outweigh the advantages here IMHO.
It seems nothing comes without a price
Easy way
Flash @Wonder Wicked Witch sound mod
Go to the viper app
Then extra gain enable and do max gain to max
EZ PZ LEMON SQUEEZEE
Need the mixer_paths_mtp.xml file
Well after trying all you said it stop giving sound at all! So because I am fool I didn't back it up and now I need someone to give me a copy of it's possible! And I will be very grateful!
---------- Post added at 10:37 PM ---------- Previous post was at 10:06 PM ----------
THM01 said:
Well, for me it acutally doesn't work at all @Stock deodexed ROM (s244). Changing any values the aforementioned XML causes the phone to not give me any sound at all - even after rebooting.
Changing the values back doesn't help either, the only way to reset the problem is to reflash or to replace the file with the backed up version. Seems rather strange, but well.
Click to expand...
Click to collapse
Could you please send me the file mixer_paths_mtp.xml because I didn't back it up (I know I am fool) and now don't have sound at all... If you do this I own you!
There you go : https://drive.google.com/file/d/1GwSEvJ4yq2pEb1gQWMj0iUoyHXjcsTbm/view?usp=sharing
It's from viper OS (7.1.2) so I hope nothing changed, but I hope it works for you
MIUI 10 Sounds ChangerAt the MIUI 10 launch event Xiaomi said that MIUI 10 is all about sounds. But after using MIUI 10 for some days I think that most of the UI sounds of MIUI 10 (charger connect/disconnect, lock/unlock, etc.) are unpleasant and they were way better in MIUI 9. I personally hate the delete sound from MIUI 10.
So I made this Magisk module that changes the unpleasant MIUI 10 UI sounds to the great MIUI 9 sounds systemlessly.
Changes Made :-
Lock/Unlock sound sounds are changed to MIUI 9 default.
Charger connect/disconnect sounds are different now, but they are from MIUI 10.
SMS delivered sound is shorter and more easy on the ear when you send one SMS after another.
Low battery sound is changed to a pleasant one.
Delete sound is changed to Windows 10's empty recycle bin sound.
Requirements:-
I have tested this module on Redmi Note 5 Pro Indian version Running MIUI 10 Global 8.6.14 Beta (8.1.0 Oreo), but it should work on other MIUI 10 ROM's too. You just need to flash this .zip via Magisk directly.
Future Updates:-
Interested persons can test this module and tell me if it works in their device/ROM or not.
I will update this module if I come across any more annoying sounds in MIUI 10.
Suggestions are appreciated for changing any UI sounds to anything else or if you don't like my choise of new sounds (everyone definitely has their own taste of sounds). Tell me which sound you hate or need me to change and I will try to change that and update the module if you guys want.
I will upload this module to Magisk Repo whenever I get time.
You can also change the sounds yourself by unpacking the module.zip file using any app like WinRAR/WinZip and changing the existing audio file for specific sounds from the directory system/media/audio/ui/ to what you desire. You can even change the sounds which I haven't changed by placing the audio file you want to change in the system/media/audio/ui/ directory.
You just need to remember that the new audio file's name should be same as the one you want to replace from that directory.
The audio files should only be in .ogg format.
You have to repack the files as they are after replacing/adding files without any compression and flash it from magisk.
Hit the thanks button if you appreciate my work.
rock solid on my mi 6x with miui 10 :-bd
in case, you (or anybody else) would like the "muted delete" version;
I've attached mine (actually I just replaced the "Delete.ogg" file)
oh, if you find my mod version is disturbing your thread...
just let me know, I'll remove my modded version