(26/09/21) Note.- This tool is primarily for realme 6Pro on RUI2.0, and is expected to work on it without issues. However deep-test apks sometimes work for other devices too... If it's working on yours then good, if not then there's nothing that can be done except find the correct one for your device [c.realme.com]. These tools have in-built checks and I have no idea which parameters it considers, if I had to guess I'd say a certain fw version requirement and the model of chipset. So if you have any device other than RMX2061/3 and this tool didn't work, I'm sorry.
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ADB and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Thank you
key combinations for fastboot mode not working
dks4deepak said:
key combinations for fastboot mode not working
Click to expand...
Click to collapse
Use adb reboot-bootloader.
debdeep98 said:
Use adb reboot-bootloader.
Click to expand...
Click to collapse
when stuck at boot /recovery destroyed screen. there is no adb.
dks4deepak said:
when stuck at boot /recovery destroyed screen. there is no adb.
Click to expand...
Click to collapse
Locked on custom partitions?
Motherboard change is the only option now.
Good morning,
i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out
"Failed to submit application. - This phone model does not support deep testing."
what can I do?
freder_ said:
Good morning,
i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out
"Failed to submit application. - This phone model does not support deep testing."
what can I do?
Click to expand...
Click to collapse
Wait for realme to allow bl unlocks on 8 5G.
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11
DeSmanAryPotter said:
Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11
Click to expand...
Click to collapse
Yeah it's for the 6Pro. When realme allows unlocks on 7i it'll work.
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
I can not install the app, how can I do?
Facux3 said:
I can not install the app, how can I do?
Click to expand...
Click to collapse
Device and Android version.
nice work
the adb folder is not opening , what to do ? im using windows 10
What do you mean? Access denied? Try downloading platform tools again.
p.pc said:
the adb folder is not opening , what to do ? im using windows 10
Click to expand...
Click to collapse
How about Realme X7 Pro?
lfnisme said:
How about Realme X7 Pro?
Click to expand...
Click to collapse
You can try. See if it works.
App not installed on realme X2 Pro
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?
My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?
Related
Warning: The whole procedure is fully Experimental, this tool can brick your device, I will not responsible if you brick your device, try it with your own risk.
I have not tried the method yet, this tool performs so many function with NOKIA 6 too, but I didn't use the UNLOCK BOOT LOADER option yet, I want a tester who has already unlocked the bootloader and want to re-lock it, try it and give a feedback if it works
I would like to share a tool with you guys, this tool can perform many functions
Note: turn off your antivirus first then proceed
Download the tool from here
https://mega.nz/#!9Up1XJ5a!1nhxdqtIljdItjgPers9qM0ry8d4Dhc8HOX5pJ2mEQI
This tool is patched already so you do not need to crack it or use any BOX for it.
This tool works without box or modem
You only need to see if your PC is up to date and all drivers and frameworks are up to date or not
Now open you tool
REMEMBER: Turn off your Anti virus application before launching the app
Now an UI will appear, select "MIRACLE CRACK 2.27A" from there.
Now connect your device to your PC. Make sure your on DEVELOPER MODE
Then a new UI will appear, select on "ANDROID" Then "HOME ADB"
After that if you want to unlock your BOOTLOADER, reboot your device into download mode then select unclock bootloader from the options
Or RE-LOCK option is also available
Finally click start button
Done
Hit thanks button if you find this useful
happy flashing
Ok. I will test and report to you.
My data is too much I will weigh.
taicracker said:
Ok. I will test and report to you.
My data is too much I will weigh.
Click to expand...
Click to collapse
Okay sure, thank you, also try if custom recovery could be install by this tool or not...
May this tool will help many users in future.. :fingers-crossed:
Does the Nokia device have exclusive system keys such as Sony (DRM key) devices? Unlocking loses those keys. Can you tell me. And I will test this tool soon.
taicracker said:
Does the Nokia device have exclusive system keys such as Sony (DRM key) devices? Unlocking loses those keys. Can you tell me. And I will test this tool soon.
Click to expand...
Click to collapse
I don't know buddy about that, i didn't had any sony device in tha past.
Sorry...
I won't force you to test this tool my dear friend
Its up to you :good:
Tell me about this, if this work
Hope for the best :fingers-crossed:
Ok I will test
taicracker said:
Ok I will test
Click to expand...
Click to collapse
Sure
sltushar said:
Sure
Click to expand...
Click to collapse
Could not connect to phone. Do you have any solutions?
Log:
Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Check Authentication...
Check the new version.
Abort by User
Fuzzy Logic Method is very safe and reliable !
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
Timeout. Please Check Pinouts or ReDo
Abort by User
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
>>Timeout. Please Check Pinouts or ReDo
taicracker said:
Could not connect to phone. Do you have any solutions?
Log:
Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Check Authentication...
Check the new version.
Abort by User
Fuzzy Logic Method is very safe and reliable !
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
Timeout. Please Check Pinouts or ReDo
Abort by User
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
>>Timeout. Please Check Pinouts or ReDo
Click to expand...
Click to collapse
Do your computer has all driver and framework installed properly?
And do your phone is developer mode on, also make sure in developer mode allow oem unlock option is turned on.
Because my phone is working fine with it, just not ready right now for any brick, damaged, dead cause to device, because this is only the source right now i have.
Try rebooting to fastboot from ADB option on the tool, if it works then it might unlock the bootloader too, check the drivers..
Finger crossed :fingers-crossed:
sltushar said:
Do your computer has all driver and framework installed properly?
And do your phone is developer mode on, also make sure in developer mode allow oem unlock option is turned on.
Because my phone is working fine with it, just not ready right now for any brick, damaged, dead cause to device, because this is only the source right now i have.
Try rebooting to fastboot from ADB option on the tool, if it works then it might unlock the bootloader too, check the drivers..
Finger crossed :fingers-crossed:
Click to expand...
Click to collapse
The ADB system works well, maybe ROOT is.
But fastboot mode does not work. I also try to put the phone on fastboot mode with OST (edit fone information)
But Miracle Box does not work with fastboot of Nokia 6. (Wait for developer update)
You cracked the picture as old version, maybe it Nokia 6 not support )
taicracker said:
The ADB system works well, maybe ROOT is.
But fastboot mode does not work. I also try to put the phone on fastboot mode with OST (edit fone information)
But Miracle Box does not work with fastboot of Nokia 6. (Wait for developer update)
You cracked the picture as old version, maybe it Nokia 6 not support )
Click to expand...
Click to collapse
Well, i think i need to try it on my device, i will, but not now, later on
I just reconsider and can not Root with this tool always
taicracker said:
I just reconsider and can not Root with this tool always
Click to expand...
Click to collapse
Fine, can you try one more thing, see if it can flash recovery with this tool.
sltushar said:
Fine, can you try one more thing, see if it can flash recovery with this tool.
Click to expand...
Click to collapse
Are not! The fastboot (Flash) and ADB modes do not work, just see the phone's information. I tried the tool buttons but it does not work even ROOT.
taicracker said:
Are not! The fastboot (Flash) and ADB modes do not work, just see the phone's information. I tried the tool buttons but it does not work even ROOT.
Click to expand...
Click to collapse
Well, for me both worked, but i didn't tried tha bootloader option
I will try once i get professional job, since this is only the source right now
May be you're already rooted or custom recovery installed so its not working or may be driver problem, because my system is detecting in both adb and fastboot mode..
sltushar said:
Well, for me both worked, but i didn't tried tha bootloader option
I will try once i get professional job, since this is only the source right now
May be you're already rooted or custom recovery installed so its not working or may be driver problem, because my system is detecting in both adb and fastboot mode..
Click to expand...
Click to collapse
I flashed the software through OST and tried ROOT but failed. I tried the other options but failed. ^^. It's possible to share your gadget with your Nokia 6, and my TA-1000.
taicracker said:
I flashed the software through OST and tried ROOT but failed. I tried the other options but failed. ^^. It's possible to share your gadget with your Nokia 6, and my TA-1000.
Click to expand...
Click to collapse
May be, mine is TA-1021, May be both having different bootloader
Why dont you flash MENA firmware and try one more time, may be this work
Because it works on stock android, and your one is Chinese varient
sltushar said:
May be, mine is TA-1021, May be both having different bootloader
Why dont you flash MENA firmware and try one more time, may be this work
Because it works on stock android, and your one is Chinese varient
Click to expand...
Click to collapse
Ok. I will flash my TA-1025 firmware to my phone and try unlocking the bootloader again. Or wait for the updated Android 8.0 Oreo sure Unlock the bootloader (I think so) Because Nokia 8 can Unlock bootloader already.
taicracker said:
Ok. I will flash my TA-1025 firmware to my phone and try unlocking the bootloader again. Or wait for the updated Android 8.0 Oreo sure Unlock the bootloader (I think so) Because Nokia 8 can Unlock bootloader already.
Click to expand...
Click to collapse
Sure brother, i have somany tools, let see which one can unlock it
:fingers-crossed:
sltushar said:
Sure brother, i have somany tools, let see which one can unlock it
:fingers-crossed:
Click to expand...
Click to collapse
I tried flashing fw (nb0) of TA-1025 into my TA-1000 and tried ROOT with unlock bootloader but this tool is really not working.
Log:
http://forum.gsmhosting.com/vbb/12807875-post1.html
Miracle ViVo Tool 2.02 (New) 5th Jan 2018
http://forum.gsmhosting.com/vbb/12885172-post1.html
How to Use Miracle Video Tutor
http://video.amiraclebox.com
______________________________
www.dealer.amiraclebox.com
Buy 1 year Support Activation
Buy Huawei Activation Pack
________[Social Site]_________
https://facebook.com/amiracleteam
https://twitter.com/amiracleteam
______________________________
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
Abort by User
Connecting to Phone,Wait..
Connecting to Phone,Wait..ok
checking info...
Model:TA-1025
Android Ver:7.1.1
Rooting...
ROOT Fail!
Hi
Is their a root solution for Sony 3223
Hi, through the official Sony Xperia website, follow their instructions and get an unlock code to unlock your bootloader. Then follow instructions at twrp.me on how to boot TWRP in order to flash stuff. Magisk works.
I will make a comprehensive root guide.
Basically you need to check your device eligibility, and get the code when it's eligible.
Backup your data
Enable USB debugging and allow your host computer.
Make sure OEM Unlocking enabled
Install Sony Companion for drivers.
Download TWRP in development section
Turn the phone off.
Take memory card out and copy the latest Magisk
Press volume up when connecting to host computer, and the phone should show blue light
Check Device Manager. If you see unknown device, pick the driver and user Sony soXXXX (XXXX is the number)
Open command prompt and go to where ADB is.
Enter fastboot devices
If the model showed up, enter the command shown on Sony developer site along with code given
Let the phone boots like new and finish the initial setup.
Turn the phone off
Press volume up when connecting to host computer
Enter fastboot boot and press space once, and drag-and-drop the TWRP into the command prompt and press enter.
Install TWRP and reboot
Thanks for reply I through H3223 was not root able in Oreo?
mchlbenner said:
Thanks for reply I through H3223 was not root able in Oreo?
Click to expand...
Click to collapse
I just bought a new H3223 XA2 Ultra, and it updated all the way to the December 2018 security update. I just enabled developer options, enabled OEM unlock, and got an unlock code from Sony.
I then ran the service menu check on the phone, and it stated that the phone CAN be unlocked.
I haven't done it yet, but yes, you can unlock and root this phone.
I have found a way to unlock bootloader again! (if the normal fastboot command does not work for you!)
I had mine bootloader re-locked for some stupid reason. And my phone stayed at Lenovo logo, So no booting or flashing custom roms again. I had giving up the hope. But after searching on some Chinese website. I found a way and it WORKED! I have now again a unlocked bootloader.
The website is in Chinese but don't worry people you just need to fill in some small data.
1: go to the website : https://www.zui.com/iunlock
fill box 1 your IMEI 1
fill box 2 your SERIAL key (the key that you get when you connect to fastboot and use the command 'Fastboot Devices')
fill box 3 your email
fill box 4 the security code that you see to the right of it ( Four numbers )
check the last box, as accepting the rules for warranty blabla. And click the BLUE BIG button
Now wait and have patience! After a while you will get a email with a file in it. Download that file and put it in your adb folder.
now check your device first if its connected and that you see the serial.
- > Fastboot devices <-
If YES than continue...
Use the command :
Fastboot flash unlock (name_of_the_file).img
after that use command:
fastboot oem unlock-go
And your bootloader is UNLOCKED AGAIN !!! :highfive::good::laugh:
Phone is back to life
Disclaimer: sharing your imei is not safe, other people can easily duplicate it on other phones. Google: ''why you shouldn't share your imei''.
Use this as your last resort if your phone doesn't boot or is bricked. Use a fake imei, follow the process and once or phone is unlocked, update the imei using the link @sth0r created on xda to fix imei for the lenovo z5
xperia_bird said:
I have found a way to unlock bootloader again! (if the normal fastboot command does not work for you!)
I had mine bootloader re-locked for some stupid reason. And my phone stayed at Lenovo logo, So no booting or flashing custom roms again. I had giving up the hope. But after searching on some Chinese website. I found a way and it WORKED! I have now again a unlocked bootloader.
The website is in Chinese but don't worry people you just need to fill in some small data.
1: go to the website : https://www.zui.com/iunlock
fill box 1 your IMEI 1
fill box 2 your SERIAL key (the key that you get when you connect to fastboot and use the command 'Fastboot Devices')
fill box 3 your email
fill box 4 the security code that you see to the right of it ( Four numbers )
check the last box, as accepting the rules for warranty blabla. And click the BLUE BIG button
Now wait and have patience! After a while you will get a email with a file in it. Download that file and put it in your adb folder.
now check your device first if its connected and that you see the serial.
- > Fastboot devices <-
If YES than continue...
Use the command :
Fastboot flash unlock (name_of_the_file).img
after that use command:
fastboot oem unlock-go
And your bootloader is UNLOCKED AGAIN !!! :highfive::good::laugh:
Phone is back to life
Disclaimer: sharing your imei is not safe, other people can easily duplicate it on other phones. Google: ''why you shouldn't share your imei''.
Use this as your last resort if your phone doesn't boot or is bricked. Use a fake imei, follow the process and once or phone is unlocked, update the imei using the link @sth0r created on xda to fix imei for the lenovo z5
Click to expand...
Click to collapse
hi i tried to follow this guide to unlock bootloader but on the lenovo website it is asking for an 8 digit serial number but my lenovo z5 only has 7 digit serial number can you please help
karanzxhao said:
hi i tried to follow this guide to unlock bootloader but on the lenovo website it is asking for an 8 digits but my lenovo z5 only has 7 digits
Click to expand...
Click to collapse
In this case the fastboot command is wrong.
You want to boot the phone up to the landing screen and enter ADB devices in your command prompt. Enter That.
You can also get the correct serial by opening the dialer app and entering *#06# in your touch phone pop-up keypad
Hope that helps!
This was helpful, It worked for me. Thanks.
Guide outdated - this worked for me now
Phone: ZUK Z2 Plus (Z2131)
After having tried many times following this tutorial and never receiving any E-Mail, I found a rather simple solution that worked:
I didn't really expect it to work, so this is from memory, wordings may differ a bit.
First: make backup of your data!
Make sure you have updated ZUI to the latest available version.
Enable developer options ( From your device go to " About -> ZUI version" , scroll down and click " build number " continuously until you see "You are now a developer")
Go to developer Options and look for the toggle "Allow OEM Unlock" (or similar) and set it to enable. Confirm.
Reboot.
The phone automatically performs a factory reset (All Data lost!).
Now you can continue with flashing custom recovery (TWRP) and ROM.
For example use Lineage OS. Instructions: (Sorry, can't post the link)
Finally I can enjoy the phone with custom ROM and up-to-date Android 10.
Is this why I can't see my device when it is in fast boot mode or boot loader mode?
a9REhdDp5V said:
Guide outdated - this worked for me now
Phone: ZUK Z2 Plus (Z2131)
After having tried many times following this tutorial and never receiving any E-Mail, I found a rather simple solution that worked:
I didn't really expect it to work, so this is from memory, wordings may differ a bit.
First: make backup of your data!
Make sure you have updated ZUI to the latest available version.
Enable developer options ( From your device go to " About -> ZUI version" , scroll down and click " build number " continuously until you see "You are now a developer")
Go to developer Options and look for the toggle "Allow OEM Unlock" (or similar) and set it to enable. Confirm.
Reboot.
The phone automatically performs a factory reset (All Data lost!).
Now you can continue with flashing custom recovery (TWRP) and ROM.
For example use Lineage OS. Instructions: (Sorry, can't post the link)
Finally I can enjoy the phone with custom ROM and up-to-date Android 10.
Click to expand...
Click to collapse
You are liar.
This solution will not work, because bootloader still will be locked at this state
Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.
TotallyNotInUse said:
Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.
Click to expand...
Click to collapse
I asked DC_Unlocker Support if they could Unlock my Bootloader on my P10Lite with android 8 ! And they told me after Android 8, and Emui 5+ the P10Lite Devices aren't Supported now.
If their would be a Way or if anyone has an other Idea... DLoad, Flashing Roms Rollback didn't worked for me.
But i would really like to try other Ways if their would be a Chance for a Working Way to Rollback on Android 7. Couse than DC-Unlocker would Work and could Unlock the Bootloader and Root the Phone, Flash TWRP and Doing much other things.
Sent from my [device_name] using XDA-Developers Legacy app
I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.
ElChe said:
I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.
Click to expand...
Click to collapse
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!
TotallyNotInUse said:
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!
Click to expand...
Click to collapse
Wow thanks! I'll get on that this weekend!
My Xiaomi Redmi Note 8 Pro isn't booting anymore.
I'm stuck in the fastboot screen, I don't even reach the redmi logo in the boot, I need to recover the data on the phone but I have no idea about how to do that.
Any suggestions?
(Already tried going to recovery with power down + volume up, isn't working)
I'm stuck in the fastboot screen
Click to expand...
Click to collapse
I'm assuming you have Fastboot.
Was USB Debugging ON before the device got bricked? If yes then:
> Download TWRP Recovery for Redmi Note 8 Pro from twrp website. Rename the file to: twrp.img
> Download latest Xiaomi USB Drivers for PC from Internet.
> Download 15-Seconds-ADB-Installer for PC from Internet.
> After Installation is over, Restart PC > Windows Explorer > This PC/ My Computer > ADB Folder > Press SHIFT+Right Click Mouse+Open Powershell Window Here > New window opens
> Transfer the twrp.img file to ADB folder.
> Now you can try connecting the XRN8Pro to the PC (while the Fastboot screen is on)
> On the Powershell window you can type one by one:
1) fastboot devices
2) fastboot boot twrp.img
> Your XRN8Pro phone should boot to TWRP Custom Recovery.
> On PC open another Windows Explorer tab and check if your phones Internal Storage is displayed. If yes you can try to copy your phone data to PC.
> After that in TWRP recovery Press Reboot to Bootloader option, It will show Fastboot screen.
> Download XRN8Pro Stock Firmware/Fastboot ROM from Internet to Desktop only.
> Download Mi Flash Tool for XRN8Pro. Double Click on XiaoMiFlash.exe file.
> Connect XRN8Pro to PC (while fastboot screen is on)
> Then on MiFlash window click on folder to link to firmware file on desktop & click on refresh button, then click on Flash. It takes about 17 minutes (for RN8 devices) to flash MIUI ROM.
OldNoobOne said:
I'm assuming you have Fastboot.
Was USB Debugging ON before the device got bricked? If yes then:
> Download TWRP Recovery for Redmi Note 8 Pro from twrp website. Rename the file to: twrp.img
> Download latest Xiaomi USB Drivers for PC from Internet.
> Download 15-Seconds-ADB-Installer for PC from Internet.
> After Installation is over, Restart PC > Windows Explorer > This PC/ My Computer > ADB Folder > Press SHIFT+Right Click Mouse+Open Powershell Window Here > New window opens
> Transfer the twrp.img file to ADB folder.
> Now you can try connecting the XRN8Pro to the PC (while the Fastboot screen is on)
> On the Powershell window you can type one by one:
1) fastboot devices
2) fastboot boot twrp.img
> Your XRN8Pro phone should boot to TWRP Custom Recovery.
> On PC open another Windows Explorer tab and check if your phones Internal Storage is displayed. If yes you can try to copy your phone data to PC.
> After that in TWRP recovery Press Reboot to Bootloader option, It will show Fastboot screen.
> Download XRN8Pro Stock Firmware/Fastboot ROM from Internet to Desktop only.
> Download Mi Flash Tool for XRN8Pro. Double Click on XiaoMiFlash.exe file.
> Connect XRN8Pro to PC (while fastboot screen is on)
> Then on MiFlash window click on folder to link to firmware file on desktop & click on refresh button, then click on Flash. It takes about 17 minutes (for RN8 devices) to flash MIUI ROM.
Click to expand...
Click to collapse
Thanks for the reply, this game me some hope, but I don't think USB Debugging was enabled.
I've never rooted or changed rom, I just rebooted the phone and apparently I triggered the rm -rf / command.
BrickedXiaomi said:
Thanks for the reply, this game me some hope, but I don't think USB Debugging was enabled.
I've never rooted or changed rom, I just rebooted the phone and apparently I triggered the rm -rf / command.
Click to expand...
Click to collapse
No problem, even then TWRP should allow MTP file transfer to PC, so follow all the steps and tell me what happens ok
OldNoobOne said:
No problem, even then TWRP should allow MTP file transfer to PC, so follow all the steps and tell me what happens ok
Click to expand...
Click to collapse
I'll try tomorrow, thanks for all the precious details btw!
Just a question, shouldn't I unlock the phone with mi unlocker before that?
BrickedXiaomi said:
Just a question, shouldn't I unlock the phone with mi unlocker before that?
Click to expand...
Click to collapse
You hadn't already? OMG! Sorry. Yup probably would need bootloader unlocking but you can try to lookup steps for Fastboot commands to unlock bootloader on the internet. But it shouldn't trigger a wipe of any sort or you might lose the data inside. Also, no harm in trying to load TWRP using Fastboot i think, just in case TWRP loads.
OldNoobOne said:
You hadn't already? OMG! Sorry. Yup probably would need bootloader unlocking but you can try to lookup steps for Fastboot commands to unlock bootloader on the internet. But it shouldn't trigger a wipe of any sort or you might lose the data inside. Also, no harm in trying to load TWRP using Fastboot i think, just in case TWRP loads.
Click to expand...
Click to collapse
As said, I never modified this phone, is basically as if it was brand new, OS side.
Maybe I can use https://forum.xda-developers.com/t/unlock-bootloader-without-losing-data.3864667/ to unlock the bootloader without loosing data?
BrickedXiaomi said:
Maybe I can use https://forum.xda-developers.com/t/unlock-bootloader-without-losing-data.3864667/ to unlock the bootloader without loosing data?
Click to expand...
Click to collapse
Wow thats great link, I hope it works so you don't lose data.
The link is fresh so you can also ask there. All the Best
Update: I've tried to contact Xiaomi about the issue.
They said they should be able to help me out with this stuff, and that I shouldn't flash my phone because it's really easy to brick.
I understand that it's the usual support recommendation, but it is possible that they know how to fix this issue?
What should I do, go for their way or go for myself?
BrickedXiaomi said:
Update: I've tried to contact Xiaomi about the issue.
They said they should be able to help me out with this stuff, and that I shouldn't flash my phone because it's really easy to brick.
I understand that it's the usual support recommendation, but it is possible that they know how to fix this issue?
What should I do, go for their way or go for myself?
Click to expand...
Click to collapse
Is your phone In-Warranty? If yes or no i would suggest go your own way, once purchased an used any device, don't connect with OEM servers ever again for any OTA update coz lots of recent cases about OEM(Original Equipment Manufatureres) killing devices with OTA updates and after that the phone doesnt boot, no recovery no fastboot too, so careful with contacting/updating through OEMs if out -of-warranty specially. Once out-of-warranty always use ROM channels to upgrade to new handroid versions instead of direct OTA upgrade/update, that way you may still be able to roll back the OS to previous version in case you don't like the new handroid version, lots of people don't like handroid 12 but they cant roll back to handroid 11 .
> recent cases about OEM(Original Equipment Manufatureres) killing devices with OTA updates
This is considered highly illegal in Europe, I could sue Xiaomi for that, in case, and would be an easy win.
Btw, I'm the one who bought this phone first, it's just out of warranty since I've bought it in nov-19.
After this data recovery I'll be out of the Android world forever, I just care about my data, currently.
BrickedXiaomi said:
> recent cases about OEM(Original Equipment Manufatureres) killing devices with OTA updates
This is considered highly illegal in Europe, I could sue Xiaomi for that, in case, and would be an easy win.
Btw, I'm the one who bought this phone first, it's just out of warranty since I've bought it in nov-19.
After this data recovery I'll be out of the Android world forever, I just care about my data, currently.
Click to expand...
Click to collapse
Yes they might not try doing that with uropean customers but they might try in other countries where there no proper legal system for things like these, also they wont do it with everyone in a particular country to avoid suspicion, theyre smart enough to know what theyre doing, but unofficially speaking many retailers have told me about such a thing (OTA Kill Device) happening in Weaker-Law-N-Order countries, so just saying precaution is always good.
BTW i've put my Retmi Noat 10 up for sale, its still in warranty & I havent used it in the last 10 months, no sim card, unused totally, just once I loaded Gcam to check how the camera is, shamshung is always better than chyneez phones mainly coz better build and component-life, chyneez devices only look shiny from outside but it doesnt last beyond 3-5 yrs, not built to last, just use-n-throw devices u knw. Such devices are only made for mass-surveillance in mind not with customers-focus. This A/B partition thing and super partition thing is adding more bad than good.
I don't think that trick will work. even if it would be possible to cheat that easy, encryption key is bonded* to bootloader lock state. so if you somehow magically managed to unlock bootloader without triggering factory reset, your data could no longer decrypted from android OS and is therefore lost.
Xiaomi support answered they can fix your phone, but they didn't say they can safe your data on it, right!? So try to get a full backup off your device in preloader mode (SLA/DAA bypass and VCOM drivers needed)
After that important step you can unlock bootloader with mtkclient, install TWRP and *proof me wrong (xiaomi devices are hackable/have weak security implementations). In any case do not perform factory reset, your backup is always only backup of android OS and therefore incomplete (there are several OS on every device)
btw fastboot doesn't require usb-debugging (that's adb, not fastboot)
Do you have a tutorial about it?
aIecxs said:
I don't think that trick will work. even if it would be possible to cheat that easy, encryption key is bonded to bootloader lock state. so if you somehow magically managed to unlock bootloader without triggering factory reset, your data could no longer decrypted from android OS and is therefore lost.
Xiaomi support answered they can fix your phone, but they didn't say they can safe your data on it, right!? So try to get a full backup of your device in EDL mode (patched firehose programmer and deep flash cable needed)
Click to expand...
Click to collapse