Related
I have a Sony Xperia Z3 model D6653 with Android 4.4.4 build 23.0.1.A.1.49, I tried to unlock the boot loader at the Sony website, It went al right till the part when I need to run cmd at the platform-tools folder (from sdk bundle), when I write "fastboot devices" the cmd don't respond me with anything, it just appears another line to enter a command again
- Installed the Google USB Driver, Android 4.4W.2 and Android 4.4.2 SDKs (don't know why there is not for 4.4.4)
- USB Debugging Mode: ON
- Fastboot mode (blue led at the phone corner) successful
I think that this normally happens when the PC dont detect the device
I'm stuck at this phase, please someone help me, thanks!
docs.google
.com/file/d/0B31eiZiEHpNFMGgwVnBMWXBQVjQ/edit?pli=1
xda didn't allow me for posting a photo url so I put it separated
Use the minimal adb and fastboot set up, that's a lot easier
http://d-h.st/zwu
If nothing here works, get the flashtool drivers for the z3. Works like a charm. Also, you should probably TA backup, if you haven't already.
I think it didn't worked for me,the thing is that I need to unlock bootloader to put root in the device
http://forum.xda-developers.com/z3/development/root-stock-kernel-twrp-v01-test-28-09-t2889794
https://drive.google.com/open?id=0B31eiZiEHpNFSnhzdGs1TU5pc00&authuser=0
dan_729 said:
I think it didn't worked for me,the thing is that I need to unlock bootloader to put root in the device
http://forum.xda-developers.com/z3/development/root-stock-kernel-twrp-v01-test-28-09-t2889794
https://drive.google.com/open?id=0B31eiZiEHpNFSnhzdGs1TU5pc00&authuser=0
Click to expand...
Click to collapse
You can root without unlocking.
Search XDA.
If you try to use the bootloader unlocker apk from Nokia and your Nokia 8 has an android version that's past a certain version, the apk will flat out fail with a "Device not support." error message. And chances are, your Nokia 8 will be at an incompatible android version. So to unlock the bootloader, you will need to downgrade your phone to a legitimate version of android 8.1.0 so the apk will not error out and get you a verification code. This guide will show you how. NOTE THAT THIS METHOD WILL ERASE ALL INTERNAL DATA ON YOUR PHONE.
-
This update zip is what you need for the TA-1004: https://android.googleapis.com/pack.../f9cb380bd9c2bf1b6ddebcab9dcf389843eb2d39.zip
It may be different for the TA-1012, but according to that earlier post, it does not seem to be the case. Nevertheless, just to be safe, here's the zip for the TA-1012: https://android.googleapis.com/pack.../139c94fd08f52fbd3b852ab4ef5c6515fffb784e.zip (I don't have a TA-1012 so I wasn't able to test this particular zip.)
So basically, to make sure there's no problems, make sure in the Developer's options on the phone that OEM unlocking is enabled, then put your SD card into the phone. Plug the phone into your computer. Copy the update zip that you need somewhere onto the SD card. Disconnect the USB cable. Shut down the phone. Then, while holding down the Volume Up button, reconnect the USB cable. You should see a sad android with "No command" displayed. Now release the Volume Up button. Then hold down the power button and then JUST PRESS once on the Volume Up button. You should be at a recovery menu. Using the volume keys, scroll down to the 'Apply update on SD card' option and select it. Select the zip that you copied over to the SD card earlier and then let it install for a while. It will probably pop up with a 'timestamp too old' error, but just ignore this. The update will install anyway. Then once it's done, do a factory reset on the phone and then shut down. MAKE SURE THERE'S NO SIM CARD IN THE PHONE.
Now that's out of the way, boot the phone up again and just click through the first-time setup screens but DO NOT ENABLE WI-FI or any kind of internet connection. We don't want the phone to update itself back to Android 9. Now plug the phone in again. Copy the bootloaderunlocker apk from Nokia's website onto the phone. Install it. Put in the email address you want the unlock key emailed to. Then voila! You'll get the verification code. Put it into the form on Nokia's website and you'll be emailed an unlock.key file. From there, the site will tell you how to proceed.
A HUGE thanks to: THMSP and frankoid
They did all the work. <3
why another topic ?!
foxbatul said:
why another topic ?!
Click to expand...
Click to collapse
Because I don't expect people to dig around in all the Nokia 8 Guide threads to find the exact and, to my knowledge, only way to unlock the bootloader. Furthermore, I found this solution in a sort of unrelated thread, which would make the solution even harder to find for the average user.
S5Guy said:
Because I don't expect people to dig around in all the Nokia 8 Guide threads to find the exact and, to my knowledge, only way to unlock the bootloader. Furthermore, I found this solution in a sort of unrelated thread, which would make the solution even harder to find for the average user.
Click to expand...
Click to collapse
I understant but not.
Here it's not the place for lazy ones. Or for apple boys.
Unlock, modding, ROMs are for people with other approach. So this kind of topics make more noise instead to help.
Just my 2 cents.
BTW - thank you posting "downgrade to oreo" procedure.
it s the offline one ( my choice was to use "register to beta" and" unregister").
no need SD card or something, just a good wifi connection and patience.
Thanks for this. I just noticed that the "OEM unlocking" is disabled and greyed out on my TA-1012 device. Will it still work?
I cant get into the Phone without establishing an Internet connection, any tips?
Thank you so much OP this method worked perfectly I finally was able to unlock the bootloader
There seems no way for me to get past the Wifi selection page, how did all of you got into the system?
Ok solved this one, had to Update to P remove the Google Account linked to the Device and downgrade again.
It's Part of the Factory Reset Protection that you cant skip the Wifi and Update Screens.
Thank you for posting this guide, it got me to unlocking the bootloader on my TA-1004 after I received the described "Device not support" error.
I enabled "OEM unlocking" before downgrading my firmware and the option was grayed out for me afterwards. However the bootloader unlock still worked correctly other than being forced to us a Mac as none of my windows machines would show the device in fastboot mode.
ma401 said:
Thank you for posting this guide, it got me to unlocking the bootloader on my TA-1004 after I received the described "Device not support" error.
I enabled "OEM unlocking" before downgrading my firmware and the option was grayed out for me afterwards. However the bootloader unlock still worked correctly other than being forced to us a Mac as none of my windows machines would show the device in fastboot mode.
Click to expand...
Click to collapse
If only Nokia 8 had support for custom roms. Im stuck on the december security patch of Pie because it has a prerooted boot img posted somewhere on this forum. Ot would be fun to play around with a google-free custom rom like lineageOS. But sadly devs dont seem to give a damn about the phone
MDV106 said:
If only Nokia 8 had support for custom roms. Im stuck on the december security patch of Pie because it has a prerooted boot img posted somewhere on this forum. Ot would be fun to play around with a google-free custom rom like lineageOS. But sadly devs dont seem to give a damn about the phone
Click to expand...
Click to collapse
I think we can thank HMD for that by making unlocking the bootloader so difficult. I only ended up buying the Nokia 8 because I got it for such a good deal ($220 CAD) and needed a temporary phone to tide me over until I can get something better. I feel sorry for anyone who paid full price for this phone and I don't blame developers for moving to something more accessible.
S5Guy said:
If you try to use the bootloader unlocker apk from Nokia and your Nokia 8 has an android version that's past a certain version, the apk will flat out fail with a "Device not support." error message. And chances are, your Nokia 8 will be at an incompatible android version. So to unlock the bootloader, you will need to downgrade your phone to a legitimate version of android 8.1.0 so the apk will not error out and get you a verification code. This guide will show you how. NOTE THAT THIS METHOD WILL ERASE ALL INTERNAL DATA ON YOUR PHONE.
-
This update zip is what you need for the TA-1004: https://android.googleapis.com/pack.../f9cb380bd9c2bf1b6ddebcab9dcf389843eb2d39.zip
It may be different for the TA-1012, but according to that earlier post, it does not seem to be the case. Nevertheless, just to be safe, here's the zip for the TA-1012: https://android.googleapis.com/pack.../139c94fd08f52fbd3b852ab4ef5c6515fffb784e.zip (I don't have a TA-1012 so I wasn't able to test this particular zip.)
So basically, to make sure there's no problems, make sure in the Developer's options on the phone that OEM unlocking is enabled, then put your SD card into the phone. Plug the phone into your computer. Copy the update zip that you need somewhere onto the SD card. Disconnect the USB cable. Shut down the phone. Then, while holding down the Volume Up button, reconnect the USB cable. You should see a sad android with "No command" displayed. Now release the Volume Up button. Then hold down the power button and then JUST PRESS once on the Volume Up button. You should be at a recovery menu. Using the volume keys, scroll down to the 'Apply update on SD card' option and select it. Select the zip that you copied over to the SD card earlier and then let it install for a while. It will probably pop up with a 'timestamp too old' error, but just ignore this. The update will install anyway. Then once it's done, do a factory reset on the phone and then shut down. MAKE SURE THERE'S NO SIM CARD IN THE PHONE.
Now that's out of the way, boot the phone up again and just click through the first-time setup screens but DO NOT ENABLE WI-FI or any kind of internet connection. We don't want the phone to update itself back to Android 9. Now plug the phone in again. Copy the bootloaderunlocker apk from Nokia's website onto the phone. Install it. Put in the email address you want the unlock key emailed to. Then voila! You'll get the verification code. Put it into the form on Nokia's website and you'll be emailed an unlock.key file. From there, the site will tell you how to proceed.
A HUGE thanks to: THMSP and frankoid
They did all the work. <3
Click to expand...
Click to collapse
Hello i too tried unlocking my nokia 8 but the laptop doesnt recognise my phone in fastboot Mode.i need help i installed all drivers but the same problem arises
shivaji namburu said:
Hello i too tried unlocking my nokia 8 but the laptop doesnt recognise my phone in fastboot Mode.i need help i installed all drivers but the same problem arises
Click to expand...
Click to collapse
try fastboot -i 0x2e04 [Your_Command]
sumitinhome said:
try fastboot -i 0x2e04 [Your_Command]
Click to expand...
Click to collapse
Actually even pc doesnt detect the device and it doesn't show in my pc section
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
sumitinhome said:
try fastboot -i 0x2e04 [Your_Command]
Click to expand...
Click to collapse
What is that i didn't get it will it work.....?
If possible put the command clearly ....to understand
shivaji namburu said:
Actually even pc doesnt detect the device and it doesn't show in my pc section
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
What is that i didn't get it will it work.....?
If possible put the command clearly ....to understand
Click to expand...
Click to collapse
If pc is not detecting the phone the its driver problem. try to install proper drivers.
sumitinhome said:
If pc is not detecting the phone the its driver problem. try to install proper drivers.
Click to expand...
Click to collapse
I mean it detects when the phone is in nornal mode but when mobile is booted into fastboot mode it doesn't detect
shivaji namburu said:
I mean it detects when the phone is in nornal mode but when mobile is booted into fastboot mode it doesn't detect
Click to expand...
Click to collapse
Yes i understood, make sure you are using latest adb drivers.
More on it. Make sure you have USB debugging on from Developers options. Also make sure oem unlocking option is on.
1 - Connect your phone to pc while powered on.
2 - From adb folder open command prompt and type adb devices (If your device is detected in adb mode while powered on)
2.1 - if not detected in adb devices.. then go to developer settings and revoke USB debugging authorizations. then again repeat the above process in point no. 2.
3 - if detected now then type adb reboot bootloader, let it reboot in download mode.
4. then type 'fastboot flash unlock [your unlock key]' if this doesnt work then try 'fastboot -i 0x2e04 flash unlock [unlock key]'
5. after that either 'fastboot oem unlock' or 'fastboot -i 0x2e04 oem unlock'
See if this works.
Struck on Nokia Logo
S5Guy said:
If you try to use the bootloader unlocker apk from Nokia and your Nokia 8 has an android version that's past a certain version, the apk will flat out fail with a "Device not support." error message. And chances are, your Nokia 8 will be at an incompatible android version. So to unlock the bootloader, you will need to downgrade your phone to a legitimate version of android 8.1.0 so the apk will not error out and get you a verification code. This guide will show you how. NOTE THAT THIS METHOD WILL ERASE ALL INTERNAL DATA ON YOUR PHONE.
-
This update zip is what you need for the TA-1004: https://android.googleapis.com/pack.../f9cb380bd9c2bf1b6ddebcab9dcf389843eb2d39.zip
It may be different for the TA-1012, but according to that earlier post, it does not seem to be the case. Nevertheless, just to be safe, here's the zip for the TA-1012: https://android.googleapis.com/pack.../139c94fd08f52fbd3b852ab4ef5c6515fffb784e.zip (I don't have a TA-1012 so I wasn't able to test this particular zip.)
So basically, to make sure there's no problems, make sure in the Developer's options on the phone that OEM unlocking is enabled, then put your SD card into the phone. Plug the phone into your computer. Copy the update zip that you need somewhere onto the SD card. Disconnect the USB cable. Shut down the phone. Then, while holding down the Volume Up button, reconnect the USB cable. You should see a sad android with "No command" displayed. Now release the Volume Up button. Then hold down the power button and then JUST PRESS once on the Volume Up button. You should be at a recovery menu. Using the volume keys, scroll down to the 'Apply update on SD card' option and select it. Select the zip that you copied over to the SD card earlier and then let it install for a while. It will probably pop up with a 'timestamp too old' error, but just ignore this. The update will install anyway. Then once it's done, do a factory reset on the phone and then shut down. MAKE SURE THERE'S NO SIM CARD IN THE PHONE.
Now that's out of the way, boot the phone up again and just click through the first-time setup screens but DO NOT ENABLE WI-FI or any kind of internet connection. We don't want the phone to update itself back to Android 9. Now plug the phone in again. Copy the bootloaderunlocker apk from Nokia's website onto the phone. Install it. Put in the email address you want the unlock key emailed to. Then voila! You'll get the verification code. Put it into the form on Nokia's website and you'll be emailed an unlock.key file. From there, the site will tell you how to proceed.
A HUGE thanks to: THMSP and frankoid
They did all the work. <3
Click to expand...
Click to collapse
after this my phone struck on nokia logo, please help,,,,
i'm training to recovery mode \ download mode but not working both
gvreddy said:
after this my phone struck on nokia logo, please help,,,,
i'm training to recovery mode \ download mode but not working both
Click to expand...
Click to collapse
Factory reset by wiping cache and data via recovery. Start over and try again.
I have found a way to unlock bootloader again! (if the normal fastboot command does not work for you!)
I had mine bootloader re-locked for some stupid reason. And my phone stayed at Lenovo logo, So no booting or flashing custom roms again. I had giving up the hope. But after searching on some Chinese website. I found a way and it WORKED! I have now again a unlocked bootloader.
The website is in Chinese but don't worry people you just need to fill in some small data.
1: go to the website : https://www.zui.com/iunlock
fill box 1 your IMEI 1
fill box 2 your SERIAL key (the key that you get when you connect to fastboot and use the command 'Fastboot Devices')
fill box 3 your email
fill box 4 the security code that you see to the right of it ( Four numbers )
check the last box, as accepting the rules for warranty blabla. And click the BLUE BIG button
Now wait and have patience! After a while you will get a email with a file in it. Download that file and put it in your adb folder.
now check your device first if its connected and that you see the serial.
- > Fastboot devices <-
If YES than continue...
Use the command :
Fastboot flash unlock (name_of_the_file).img
after that use command:
fastboot oem unlock-go
And your bootloader is UNLOCKED AGAIN !!! :highfive::good::laugh:
Phone is back to life
Disclaimer: sharing your imei is not safe, other people can easily duplicate it on other phones. Google: ''why you shouldn't share your imei''.
Use this as your last resort if your phone doesn't boot or is bricked. Use a fake imei, follow the process and once or phone is unlocked, update the imei using the link @sth0r created on xda to fix imei for the lenovo z5
xperia_bird said:
I have found a way to unlock bootloader again! (if the normal fastboot command does not work for you!)
I had mine bootloader re-locked for some stupid reason. And my phone stayed at Lenovo logo, So no booting or flashing custom roms again. I had giving up the hope. But after searching on some Chinese website. I found a way and it WORKED! I have now again a unlocked bootloader.
The website is in Chinese but don't worry people you just need to fill in some small data.
1: go to the website : https://www.zui.com/iunlock
fill box 1 your IMEI 1
fill box 2 your SERIAL key (the key that you get when you connect to fastboot and use the command 'Fastboot Devices')
fill box 3 your email
fill box 4 the security code that you see to the right of it ( Four numbers )
check the last box, as accepting the rules for warranty blabla. And click the BLUE BIG button
Now wait and have patience! After a while you will get a email with a file in it. Download that file and put it in your adb folder.
now check your device first if its connected and that you see the serial.
- > Fastboot devices <-
If YES than continue...
Use the command :
Fastboot flash unlock (name_of_the_file).img
after that use command:
fastboot oem unlock-go
And your bootloader is UNLOCKED AGAIN !!! :highfive::good::laugh:
Phone is back to life
Disclaimer: sharing your imei is not safe, other people can easily duplicate it on other phones. Google: ''why you shouldn't share your imei''.
Use this as your last resort if your phone doesn't boot or is bricked. Use a fake imei, follow the process and once or phone is unlocked, update the imei using the link @sth0r created on xda to fix imei for the lenovo z5
Click to expand...
Click to collapse
hi i tried to follow this guide to unlock bootloader but on the lenovo website it is asking for an 8 digit serial number but my lenovo z5 only has 7 digit serial number can you please help
karanzxhao said:
hi i tried to follow this guide to unlock bootloader but on the lenovo website it is asking for an 8 digits but my lenovo z5 only has 7 digits
Click to expand...
Click to collapse
In this case the fastboot command is wrong.
You want to boot the phone up to the landing screen and enter ADB devices in your command prompt. Enter That.
You can also get the correct serial by opening the dialer app and entering *#06# in your touch phone pop-up keypad
Hope that helps!
This was helpful, It worked for me. Thanks.
Guide outdated - this worked for me now
Phone: ZUK Z2 Plus (Z2131)
After having tried many times following this tutorial and never receiving any E-Mail, I found a rather simple solution that worked:
I didn't really expect it to work, so this is from memory, wordings may differ a bit.
First: make backup of your data!
Make sure you have updated ZUI to the latest available version.
Enable developer options ( From your device go to " About -> ZUI version" , scroll down and click " build number " continuously until you see "You are now a developer")
Go to developer Options and look for the toggle "Allow OEM Unlock" (or similar) and set it to enable. Confirm.
Reboot.
The phone automatically performs a factory reset (All Data lost!).
Now you can continue with flashing custom recovery (TWRP) and ROM.
For example use Lineage OS. Instructions: (Sorry, can't post the link)
Finally I can enjoy the phone with custom ROM and up-to-date Android 10.
Is this why I can't see my device when it is in fast boot mode or boot loader mode?
a9REhdDp5V said:
Guide outdated - this worked for me now
Phone: ZUK Z2 Plus (Z2131)
After having tried many times following this tutorial and never receiving any E-Mail, I found a rather simple solution that worked:
I didn't really expect it to work, so this is from memory, wordings may differ a bit.
First: make backup of your data!
Make sure you have updated ZUI to the latest available version.
Enable developer options ( From your device go to " About -> ZUI version" , scroll down and click " build number " continuously until you see "You are now a developer")
Go to developer Options and look for the toggle "Allow OEM Unlock" (or similar) and set it to enable. Confirm.
Reboot.
The phone automatically performs a factory reset (All Data lost!).
Now you can continue with flashing custom recovery (TWRP) and ROM.
For example use Lineage OS. Instructions: (Sorry, can't post the link)
Finally I can enjoy the phone with custom ROM and up-to-date Android 10.
Click to expand...
Click to collapse
You are liar.
This solution will not work, because bootloader still will be locked at this state
Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.
TotallyNotInUse said:
Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.
Click to expand...
Click to collapse
I asked DC_Unlocker Support if they could Unlock my Bootloader on my P10Lite with android 8 ! And they told me after Android 8, and Emui 5+ the P10Lite Devices aren't Supported now.
If their would be a Way or if anyone has an other Idea... DLoad, Flashing Roms Rollback didn't worked for me.
But i would really like to try other Ways if their would be a Chance for a Working Way to Rollback on Android 7. Couse than DC-Unlocker would Work and could Unlock the Bootloader and Root the Phone, Flash TWRP and Doing much other things.
Sent from my [device_name] using XDA-Developers Legacy app
I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.
ElChe said:
I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.
Click to expand...
Click to collapse
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!
TotallyNotInUse said:
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!
Click to expand...
Click to collapse
Wow thanks! I'll get on that this weekend!
(26/09/21) Note.- This tool is primarily for realme 6Pro on RUI2.0, and is expected to work on it without issues. However deep-test apks sometimes work for other devices too... If it's working on yours then good, if not then there's nothing that can be done except find the correct one for your device [c.realme.com]. These tools have in-built checks and I have no idea which parameters it considers, if I had to guess I'd say a certain fw version requirement and the model of chipset. So if you have any device other than RMX2061/3 and this tool didn't work, I'm sorry.
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ADB and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Thank you
key combinations for fastboot mode not working
dks4deepak said:
key combinations for fastboot mode not working
Click to expand...
Click to collapse
Use adb reboot-bootloader.
debdeep98 said:
Use adb reboot-bootloader.
Click to expand...
Click to collapse
when stuck at boot /recovery destroyed screen. there is no adb.
dks4deepak said:
when stuck at boot /recovery destroyed screen. there is no adb.
Click to expand...
Click to collapse
Locked on custom partitions?
Motherboard change is the only option now.
Good morning,
i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out
"Failed to submit application. - This phone model does not support deep testing."
what can I do?
freder_ said:
Good morning,
i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out
"Failed to submit application. - This phone model does not support deep testing."
what can I do?
Click to expand...
Click to collapse
Wait for realme to allow bl unlocks on 8 5G.
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11
DeSmanAryPotter said:
Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11
Click to expand...
Click to collapse
Yeah it's for the 6Pro. When realme allows unlocks on 7i it'll work.
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
I can not install the app, how can I do?
Facux3 said:
I can not install the app, how can I do?
Click to expand...
Click to collapse
Device and Android version.
nice work
the adb folder is not opening , what to do ? im using windows 10
What do you mean? Access denied? Try downloading platform tools again.
p.pc said:
the adb folder is not opening , what to do ? im using windows 10
Click to expand...
Click to collapse
How about Realme X7 Pro?
lfnisme said:
How about Realme X7 Pro?
Click to expand...
Click to collapse
You can try. See if it works.
App not installed on realme X2 Pro
debdeep98 said:
If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.
Your warranty may now be void.Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*
Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.
Steps for Unlock:-
Backup your data.
Install deeptesting.apk.
Open the app and click start applying.
Wait for application to be summited and processed.
Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.
Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.
Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.
Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).
Use volume and power button to select unlock the bootloader.
Phone will format and reboot.
*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*
Click to expand...
Click to collapse
My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?
My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?