Database Info

[6.0.1][M3D91] GM 5 Plus Fastboot Stock Rom

[6.0.1][M3D91] GM 5 PLUS FASTBOOT STOCK ROM
General Mobile 5 PLUS
Android One 3rd Generation STOCK ROM
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install M3D91 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
M3D91 (July Update)
M3D62B (June Update)
M3D32 (May Update)
Original Thread: http://forum.turkdevs.com/showthread.php?tid=9767
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_M3D91" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reserve

reserve2

RealSchule said:
[6.0.1][M3D32] GM 5 PLUS FASTBOOT STOCK ROM
General Mobile 5 PLUS
Android One 3rd Generation STOCK ROM
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install M3D32 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK : https://drive.google.com/file/d/0B065LdNGqJLGU0U2bFhwSlpod1E/view?pref=2&pli=1
Original Thread: http://forum.turkdevs.com/konu-6-0-1-m3d32-gm-5-plus-fastboot-stock-rom.html
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_M3D32" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
ScreenShots
Click to expand...
Click to collapse
why is system.img damaged. Its in sparse format when I am trying to convert to ext4 its failing due to its damaged
Written CR2 is not matched with Calculated CR2.

HostZero said:
why is system.img damaged. Its in sparse format when I am trying to convert to ext4 its failing due to its damaged
Written CR2 is not matched with Calculated CR2.
Click to expand...
Click to collapse
Hi, file system of gm 5 plus is squashfs, you can use simg2img for converting sparsed squashfs image to unsparsed squashfs image.

RealSchule said:
Hi, file system of gm 5 plus is squashfs, you can use simg2img for converting sparsed squashfs image to unsparsed squashfs image.
Click to expand...
Click to collapse
I have tried.
Its sparse
While converting. It converts to SquashFS.
Then Unpacking using the squash-tools doset work! So I have received a TWRP backup Anyways, Need to download that.

M3D62B(June update) version added.

M3D91(July update) version added.

I can't get the new update via OTA. What's the difference between this ROM and OTA version?

M3E26 update version Is it be added? please

Thanks

Hi!Need a help please,after i flashed a fastboot stock rom or twrp aroma stock rom i'm confronted a bootloop ??

Hi all!
i need link please, all of the 3 link is down!!
tanks in advance

Thanks

OTA update is not installed

I am offered a new OTA Rom from the updater - I download it and then in the Recover I am supposed to enter my password for the Encryption as my drive is encrypted from the factory.
Phone boots into recovery and after 1 second it boots back to normal. The message for entering the password does not appear
Who can help me?
Thanks Gordon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you replaced your stock recovery with TWRP recovery?

Sathelp said:
Have you replaced your stock recovery with TWRP recovery?
Click to expand...
Click to collapse
No - its the original stock rom. i got the handy as christmas gift. which twrp ist the newest and is there an install documentation?

I take it that it is the original EU ROM? If it's stock Chinese, then ignore this post, stock recovery works ok but I know some sellers put on a copy of EU ROM before selling it, so please check your ROM details first.
There is a newer twrp but the one have been using is the original that says it's a mi 10 pro but it works fine. Here is a link to a word doc that wrote about installing ROMs for the ultra. https://mega.nz/file/6UAhXCxZ#Np2KwhMnl8obmOvp4b-2R9ajo0zrtz3vwefy-Ya3PLs
Just use the section on twrp installation through a PCs fastboot app, then reboot system and use the OTA or flash direct from twrp. Links are in the doc for twrp or use http://mifirm.net. Apparently the latest twrp works ok too but I have not installed it yet or put a link in the doc but here is a direct link from my mega folder https://mega.nz/file/TUh0mLAZ#0jYRCIeAiCJEMW1eIvWzPSWG2MuKJMG5V-wgxtWT80M
If you are on A11, you may need to disable your lock screen password before update but twrp will let you know.
Hope it helps.

Sathelp said:
I take it that it is the original EU ROM? If it's stock Chinese, then ignore this post, stock recovery works ok but I know some sellers put on a copy of EU ROM before selling it, so please check your ROM details first.
There is a newer twrp but the one have been using is the original that says it's a mi 10 pro but it works fine. Here is a link to a word doc that wrote about installing ROMs for the ultra. https://mega.nz/file/6UAhXCxZ#Np2KwhMnl8obmOvp4b-2R9ajo0zrtz3vwefy-Ya3PLs
Just use the section on twrp installation through a PCs fastboot app, then reboot system and use the OTA or flash direct from twrp. Links are in the doc for twrp or use http://mifirm.net. Apparently the latest twrp works ok too but I have not installed it yet or put a link in the doc but here is a direct link from my mega folder https://mega.nz/file/TUh0mLAZ#0jYRCIeAiCJEMW1eIvWzPSWG2MuKJMG5V-wgxtWT80M
If you are on A11, you may need to disable your lock screen password before update but twrp will let you know.
Hope it helps.
Click to expand...
Click to collapse
thank you ... will test it

Stock Boot Image and Full ROM OTA Build Number 00WW_5_16A

Here is the stock boot image of the latest and the last update for Nokia 8 extracted from stock ROM. It can be downloaded from attachments (Boot_5_16A.rar). Simply extract the downloaded file to have the image. It should be about 52 MB in size. It is perfectly compatible with the latest TWRP and easily rootable by magisk. In the case of bootloop caused by flashing improper image to boot partition (like not compatible recovery image) flash it to the corrupted slot.
Also full OTA (for build number 00WW_5_150) is provided here. This is a maintenance release (MR) update and is flashable by stock recovery, won't factory reset your phone, and is usable for all variants of Nokia 8. I have been using it for a week or so. No problem is seen, though it's hard to point out any significant improvement.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Arashone said:
Here is the stock boot image of the latest and the last update for Nokia 8 extracted from stock ROM. It can be downloaded from attachments (Boot_5_16A.rar). Simply extract the downloaded file to have the image. It should be about 52 MB in size. It is perfectly compatible with the latest TWRP and easily rootable by magisk. In the case of bootloop caused by flashing improper image to boot partition (like not compatible recovery image) flash it to the corrupted slot.
Also full OTA (for build number 00WW_5_150) is provided here. This is a maintenance release (MR) update and is flashable by stock recovery, won't factory reset your phone, and is usable for all variants of Nokia 8. I have been using it for a week or so. No problem is seen, though it's hard to point out any significant improvement.
View attachment 5201721
Click to expand...
Click to collapse
Thank you so much.
It works very well

Hi @Arashone,
Could you compare against 5.15G to see what changed?
Cheers

madb1lly said:
Hi @Arashone,
Could you compare against 5.15G to see what changed?
Cheers
Click to expand...
Click to collapse
Actually, I see no change. Nokia didn't publish changelog or something like that either. So as of now, just using!

Arashone said:
Actually, I see no change. Nokia didn't publish changelog or something like that either. So as of now, just using!
Click to expand...
Click to collapse
Ah, I thought you had compared the files and checksums between versions for some reason. Can someone do that? Or if someone can tell me where the full images are for these two versions and how to unzip them then I'll so it.
Cheers

Infinix Note 8i Root and Stock Firmware

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've an infinix note 8i with following build number :
X683-H694EFGHIJUW-Q-OP-210831V351
I've unlocked the bootloader. But I can't find the firmware that matches my phones build number. The latest firmware that I found was :
Infinix_Note_8i_X683_MT6768_V332_210305
So obviously the build numbers are not the same. So I need solutions on what to do? Should I use this unmatched build version firmware to root my device? Or maybe I can extract my stock firmware somehow? And also another thing, some were saying I needed to flash empty vbmeta file before flashing patched boot image. So where would I get the empty vbmeta file?
Thanks In Advance.

With regards to vbmeta.img:
It doesn't matter what kind of vbmeta is used, because fastboot only changes 2 bytes on a specfic address in it which are parsed by the botloader. But the vmeta must have at least a size of 4KB.
Have attached a blank vbmeta.

jwoegerbauer said:
With regards to vbmeta.img:
It doesn't matter what kind of vbmeta is used, because fastboot only changes 2 bytes on a specfic address in it which are parsed by the botloader. But the vmeta must have at least a size of 4KB.
Have attached a blank vbmeta.
Click to expand...
Click to collapse
Thanks A Lot, Just finished rooting my device finally, though I experienced one bootloop but fixed it via SP Flash Tool. Guess I would post a detailed thread of how I did it cause there isn't much help on the internet about this model.

sharifrafid said:
Thanks A Lot, Just finished rooting my device finally, though I experienced one bootloop but fixed it via SP Flash Tool. Guess I would post a detailed thread of how I did it cause there isn't much help on the internet about this model.
Click to expand...
Click to collapse
Did you manage to root it with this build number or did you downgrade?

anthonymatar1 said:
Did you manage to root it with this build number or did you downgrade?
Click to expand...
Click to collapse
Well, first I tried with this build number and root was successful but then my Bluetooth and Wifi was not working at all. So then I had to downgrade to v332 and then root again. Now things are running perfectly.

sharifrafid said:
Well, first I tried with this build number and root was successful but then my Bluetooth and Wifi was not working at all. So then I had to downgrade to v332 and then root again. Now things are running perfectly.
Click to expand...
Click to collapse
Did you try to update your device after rooting it?

@anthonymatar1 Nope, but I think there's a high chance that updating your device will result in a brick or something. I wouldn't suggest it.

INFINIX NOTE 8i UNOFFICIAL TWRP X683
DOWNLOAD
Just Follow the Guide

mastersenpai05 said:
INFINIX NOTE 8i UNOFFICIAL TWRP X683
DOWNLOAD
Just Follow the Guide
Click to expand...
Click to collapse
Will it work for this build number X683-H694EFGHIJUW-Q-OP-220318V387

LGROMUP 1.0 - Flash LG KDZ and some helpful functions

LGROMUP 1.0 - Flash LG KDZ and some helpful functions
This is a small tool that helps you Flash KDZ easily
Base on the LGUP_Cmd tool, LGROMUP make it more easily without type command in CMD, without finding an exact COM port
Automatic select the correct port
Save KDZ history for next time flash faster
Customize the DLL file if you want
Please note: Flash KDZ by LGROMUP will make a hard reset after. Make sure to save your user data and Remove the Google account or remember it to unlock after booting up
Click to expand...
Click to collapse
And some other helpful functions:
Read phone information from Normal mode (Modem port - without adb)
Read phone information from Download mode
Automatic check phone IMEI from server to detect the exact model code and region. Get exact KDZ and download link
Reboot to System, Download mode, Power Off From Normal mode, or Download mode
Open Browser for FRP phone (Same the method of Samsung FRP bypass tool)
How to Flash KDZ:
Boot your phone to Download Mode (Hold Volume up button and connect cable)
Install LG Driver below if you are not installed it before
Open the LGROMUP tool.
Select Serial Port, DLL, KDZ file
Click Flash and wait to finish
Todo for next update:
Read information from ADB mode
Reboot from ADB, Fastboot mode
Flash KDZ keep user data
Required:
Lastest LG Driver
Microsoft .Net 4.7.2 up
Tool information:
Author: Tungtata
Language: C# .Net
Version: 1.1
Release date: Dec 19, 2021
MD5: 63e1869e0761815f8dd86dab063e0d01
Download:
Google Drive: https://drive.google.com/file/d/1kihnJtSXK7qNWP6WVTPPlZep_G2Fubb1/view?usp=sharing
Android File Host: https://www.androidfilehost.com/?fid=17825722713688253207
Changelog:
Version 1.1
Fix detect Flash error.
Fix crash bug with Ports list.
Fix wrong android version read.
Add Check information before Flash.
Add button disable drive sign. (For MTP FRP Remove)
Add Factory reset from Normal mode (Thank for unlocktool).
Click to expand...
Click to collapse
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source: https://lgrom.com/blog/lgromup
Click to expand...
Click to collapse
Please note this source post link if you post it somewhere!!
Click to expand...
Click to collapse

Any ideea why it's appearing as a trojan?

The tool has a script that read information from download mode (lg.exe) it made from python may make wrong detect by some antivirus program. You can add to except or turn off antivirus. Or do not use if you do not trust it
dumitrudan608 said:
Any ideea why it's appearing as a trojan? View attachment 5731791
Click to expand...
Click to collapse