Database Info

[How-To] Update your K10000 to Android 6.0

Hello guys since the android 6.0 update is out for this phone and many seemed to have issues upgrading it, i wrote down a guide on how to update it . Firstly there are two ways you can update your phone.
1) Via the wireless update app
2) Manually flashing the firmware
Steps:
1) Find the wireless update app on your phone and press check
2) You will be prompted to download the update file
3) Download.Install.Done.
If for some reason the first method does NOT work you can try this
1) Download the firmware file from here https://mega.nz/#!PQVWDaLZ!2ituEPLWpcAkbz9dR6dNk3E3rnl2z8YNELQ7xcYi7t0
2) Download the flash tool from here https://mega.nz/#!7AcjGCLY!5LtavmoUaz8N_GzRwJqhD9tWwRDapplAKu7TMmON7F4
3) Now open the flash tool by double clicking the SPMultiPortFlashDownloadProject.exe file
4) File -> Open Download Agent File and open this file MTK_AllInOne_DA.bin from this folder MDT_V1620_ForUpgrade
5) Click the button Scatter File and select the file MT6735M_Android_scatter which is located in
OUKITEL_K10000_V8.0_20160620 folder
6) Click Scan
7) Long press volume (+) key on your device (phone in power off state) and connect it to your PC. When green bar shows, scan successfully disconnect your phone.
8) Click Stop All and then Start All, when the small window finishes connect again your phone to the PC and the update will start automatically.
9) When the first line goes grey (COM 4 + COM 3) it means its completed.
Voila!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Please let me know if i am allowed to post the download links, if not i will upload them as attachments here!
Thank you.

Bypass Google Account Problem with K10000
Hi
After auto-update my Oukitel K10000 asks for google account I do not have (I have tried every known to me email but nothing happend). I have read all internet, have seen a lot of films - nothing.
1.I cannot enter the developer option (to enable USB) because tapping the build number does not work - ANY sugestions? or step-by-step method
2.I cannot install Quick Shortcut Maker Apk in any mode.
PLEASE help

Flash tool is down.
Edit:
Found alternatives here http://spmdttool.com/category/download
v5 is buggy.

[WIN][TOOL]KisMth - A Tool for Android generic device

/*
* Your Warranty is already voided.
* I am not responsible for anything wrong
* you do! However you can contact me
* for any help!
*/
Click to expand...
Click to collapse
KisMth is a part of ADK which you can found it here. It is not standalone Tool.
Click to expand...
Click to collapse
Information
KisMth is a Tool which will help you to typically solve your Android Adb Problems. It is a part of ADK that means you cannot download and run it as standalone (It is an addon plugin for ADK itself).
KisMth (in hindi) means luck, i.e it depends on your device if your device is supported by KisMth. KisMth allows you to extract your partition details, fix FastBoot vendor ID problems, IMEI backup/restore, create Firmware backup, create scatter file (for mtk device), unlocks your device, and much more stuffs…
Click to expand...
Click to collapse
Snappies
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Features
Get Basic/Advance device Information
Find your IMEI number
See your Device Partition details/address (total 5 types)
Reboot Device into
Bootloader (FastBoot)
Recovery
Soft Reboot
Boot into safemode
Boot from Fastboot to Android
Extract device info (which also includes "dev" path, vendor ID, etc.)
Backup/Restore
IMEI information (NVRAM, NVDATA)
SDCard, Apps+Data, Contacts, Messages, Call logs, etc.
Generate a Flashable ROM Backup
Backup whole firmware
Replace SuperSU, Kingroot with Magisk
Flash Boot and Recovery images (with or without custom recovery)
Flash Images (without custom recovery)
Fix TWRP force encrypt error (due to this bug your Internal Storage or Memory card shows 0 bytes in TWRP)
Edit Build prop
Modify boot image (so when you flash this image with SP Tool, etc you can easily unlock your screen lock without root)
Create Fastboot Flashable zip
Create Odin flashable zip (for samsung devices)
Create Scatter file for any MTK device
Click to expand...
Click to collapse
Discussions, Bugs, Reports, Enhancements
User feedback is one of the most important stuff for any application to proceed. I kindly lookup on each of users feedback and try to improve the functionality of ADK. If users have to report any bugs or request any feature request, just create a regular topic in ADK Forums with proper category. You can also that forum (apart from XDA) for discussion on general topics (No sign in or registration is required, just fill your email address and start writing)
Click to expand...
Click to collapse
Download, Install and Guides
As told earlier, KisMth is a part of ADK. So first you need to install ADK which can be found here and then install this plugin.
Install this Plugin for ADK
Forum (for discussion and query)
Click to expand...
Click to collapse
XDA:DevDB Information
KisMth, Tool/Utility for all devices (see above for details)
Contributors
[email protected]
Version Information
Status: Stable
Current Stable Version: 1.0.0.0
Stable Release Date: 2018-04-19
Created 2018-06-13
Last Updated 2018-06-13

Reserved

I'll post video guides soon

Will this enable usb debuggin on a locked phone?

latest firmware for CUBOT X19 upgrade 2020-04-21

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
upgrade 2020-04-21
​The ROM: _X19_9021C_1_V12_20191219 android 9.0
The Tool : SP_Flash_Tool_v5.2112_Win
Driver : WIN7-WIN8 _EXE_v5.1453.03 .rar or Mediatek Driver Auto Installer v1.1352 ( How To Install Mediatek Driver Auto Installer )
Flash Instruction
Cubot X19 System Upgrade: from android 8 to android 9
youtube
If your phone uses the Android 8. You must adhere to the explanation in the video
​
Caution : If your phone already uses Android 9, you must adhere to the following changes :
Click to expand...
Click to collapse
​
We do not recommend you to flash the preloader.bin file using the Flash Tool as it may brick the device. Therefore, always untick the preloader.bin option before starting the flashing process.
Select mode Download Only If you only want to flash images
Click to expand...
Click to collapse
NEXT
[GUIDE] CUBOT X19​

While I flashed the firmware there was no progress. The bootloader was unlocked. Can you please tell me the reason why?

chartek1 said:
While I flashed the firmware there was no progress. The bootloader was unlocked. Can you please tell me the reason why?
Click to expand...
Click to collapse
Instructions to Install​Charge the device battery up to 50%​
Make sure you follow and download all the required files and flash tools on your PC.
Open the flash tool exe file to open the SP Flash Tool User Interface
Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
Once you load the file, click the Download button
To start the upgrade process of stock ROM on your Cubot X19, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
When the phone connects, your device will start upgrading the stock firmware
Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
That’s it! You can reboot your Cubot X19

Hello guys;
On the official website they indicate using the "firmware upgrade" option instead to "download only" and update the preloader.bin file. How should I proceed? another question: this process unlocks the bootloader and accesses the root?

[TOOL] Eclipse Flash Tool v1.6

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
WARNING: I am not responsible for any bricked devices, bricked windows installations or a thermonuclear war!
Click to expand...
Click to collapse
What is Eclipse Flash Tool?​
Eclipse Flash Tool (EFT) is a portable program for flashing Android devices
How to use​
Open the program as Administrator
When you first open the tool you will get this popup window:
You should click YES if you dont't have the following drivers installed:
MediaTek USB drivers
ADB USB driver
Samsung USB driver
If you have all of these drivers installed click NO
If you are finished with the driver installation you should see these two windows:
A CLI interface
A UI interface
In the UI interface you should see these things:
A device list and a refresh button for it
A file selection menu
A flashing type input
A flashing mode selection
A Recovery, a Flash and a Fastboot button
Two toggles at the bottom
Info: You dont necessarly need to select your device in the device list if you are using the SP Flashtool flashing mode
When you are trying to flash your device make sure its turned ON and USB Debugging is enabled
Using the flashing type​
Fastboot​Enter the partition you want to flash on (eg.: recovery)
Odin​
Select the wanted files using the "Select" button
You can use the following options for Odin if you are using an old version:
b for bootloader filea for APc for CPs for CSCu for UMS
SP Flashtool​
You can use the following options for SP Flashtool:
formatdownloadformat-downloadfirmware-upgradecert-downloadefusedram-repair
Updates​v1.1
Added ADB and Fastboot terminal support (click the checkbox in the bottom-right corner to toggle)
v1.2
New UI look
Fixed some bugs
v1.3
Added ADB quick buttons (Power Off, Volume Up, Volume Down, Screenshot, Logcat), click the checkbox in the bottom-right corner to toggle
v1.4
Added more ADB quick buttons (Lock / Unlock device, Back Button, Home Button, App Switcher Button, ScreenMirror+RemoteControl[BETA])
Added APK installer and file copy field (Check both checkboxes to toggle)
v1.5
Added multiple file support for odin flash mode
Added Samsung FRP bypass option
Fixed some bugs
v1.6
Added a Toolbar
Program now displays infromation of your computer in the console
Added Reset buttor for Odin files
Fixed some bugs
TODO​
Add more FRP bypasses
If you have any good ideas feel free to tell me them
Download​
If I got you interested in my tool you can download it here:
Download v1.0
Download v1.1
Download v1.2
Download v1.3
Download v1.4
Download v1.5
Download v1.6
Official Website

[DEV] Thor Flash Utility - The new Samsung flash tool

Thor Flash Utility​This is a flash utility for Samsung devices, made from scratch in C#.
To run this, you must have .NET 7 runtime installed on your computer.
Latest release can be found on GitHub - https://github.com/Samsung-Loki/Thor
This tool was tested and works flawlessly, I'm open for any bug reports.
List of platforms​1) Linux (USB DevFS method)
2) Windows (not implemented)
3) Mac OS (not implemented)
How's it different from Heimdall?​Fun fact: Official Odin for Linux works using DevFS, and people report it working when Heimdall didn't.
1) Is able to do NAND Erase All (aka erase userdata) and erase any partition, given the length.
2) Ability to shutdown and reboot into Odin mode (not supported on every device)
3) Not using a USB transfer library and doing it natively for best results
4) Extended the PIT parser with new information being discovered
5) Can flash directly from an Odin .tar / .tar.md5 archive
6) Works with .lz4 files directly without manual extraction
7) Implemented EFS Clear and Bootloader Update options in Odin
8) Is able to change the sales code of the device
Support me​If you would like to support me and my team, donate here.
We're a team of teens (at age of 14-15) making random projects for fun.
Current list of commands​The up-to-date list of commands can be found here.
Usage guide​A comprehensive usage guide can be found here.
What devices were tested?​1) SM-M205FN/DS from 2019 0x00030000 (Unknown1: 0, Unknown2: 0, Version: 3)
2) SM-G355H/DS from 2014 0x00020000 (Unknown1: 0, Unknown2: 0, Version: 2)
Frequently Asked Questions​1) A fatal error occurred. The required library something could not be found.
This is a Linux Package Mixup, use this as reference.
2) What happened to original Thor (or Hreidmar)
This is a rewrite of Thor written from scratch, so I could implement the native USB communication.
Also, the old codebase was severely flawed in my opinion. I archived it here.
Credits​TheAirBlow for Thor Flash Utility
Benjamin-Dobell for documenting much of the Odin protocol

[reserved]

real

Bro finally revived good old Thor/Hreidmar

@TheAirBlow Thx.
Didn't test it yet but just a hint:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link leeds to wrong version acc to your post #1, or doesn't it?

bmwdroid said:
@TheAirBlow Thx.
Didn't test it yet but just a hint:
View attachment 5938745
Link leeds to wrong version acc to your post #1, or doesn't it?
Click to expand...
Click to collapse
Yeah, that was an accident. It is indeed .NET 7

hello, please help me flash and revive the Samsung a12 (125FN) device.
the fact is that I don 't have a pc (
I only have an arm7 phone )
Heimdall-frontend does not work in Linux Deploy in my device, it cannot flash the super partition.. tell me what else can be done in my situation!??)

ilshatiko1988 said:
hello, please help me flash and revive the Samsung a12 (125FN) device.
the fact is that I don 't have a pc (
I only have an arm7 phone )
Heimdall-frontend does not work in Linux Deploy in my device, it cannot flash the super partition.. tell me what else can be done in my situation!??)
Click to expand...
Click to collapse
This tool could probably be used in Termux or in a root shell if you somehow could install .NET 7 Runtime. But, it does require the phone to be rooted for Thor to be able to access the USB devices connected. And additionally, you need a (first phones USB) to (second phone's USB) cable to connect, or have some adapter to make it work.