So today I rooted my phone (A50) with Magisk and TWRP, but whenever I install audio related things like A.R.I.S.E or Viper4Android FX, when I boot again and unlock, the phone just Re-Locks itself! And I dunno what's going on. I didn't do anything special, on some Modules like BusyBox I had no problems, for now only audio related things. Help?
Related
I've basically been trying to root this phone for over a week now - first of all I had problems with the ADB drivers and such, but now I can actually flash stuff onto the phone.
I then also managed to flash SuperSU and XPosed and now herein lies the problem. I want to play PokémonGO.
Now, after doing a lot of reading up on the subject, it seems P-GO now uses Google's SafetyNet API in order to block Root, Xposed, etc users from playing the game.
So, I did a complete reset and tried flashing a different rom. I used the ''Stock Android 6.0 ROM'' from this thread: https://forum.xda-developers.com/android/general/leagoo-shark-1-development-support-t3415599
HOWEVER, flashing that ROM seems to wipe the recovery partition (even if you untick recovery in sp flash tool) and you end up with some chinese 4G logo banner, before it boots into the OS.
So, back to square 1. I found and re-flashed the stock Leagoo OS ROM and then tried using Magisk (because supposedly Magisk can hide itself and allow me to play P-GO).
No digs...
So, after many hours of flashing many different ROMs, performing countless resets and wipes on my phone, I think I may have found the issue.
After reading through the support forum of Magisk, it was recommended trying to go back to 0 (un-rooting, re-wiping partitions, re-flashing stock rom, etc) and seeing if my phone would then pass SafetyNet Check - It doesn't.
Purely stock ROM, does not pass SafetyNET, which I reckon is because the phone's bootloader is unlocked from the get-go.
Now, weirdly, the stock rom CAN play PokémonGo without a hitch, but installing root then mucks it up.
Seeing as Leagoo isn't exactly a common brand, I cannot install LineageOS with it's custom kernel which hides the bootloader settings....
what can I do if I want to have a rooted phone, but also want to play PokemonGo?
Hello! I have had my One plus 7 pro international running for months now, rooted, following this guide https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-bootloader-unlock-twrp-install-t3940368. I had the OTA update notification for quite some time now, but I ignored it because I was lazy. A few weeks ago my phone must have auto updated however, as I started noticing banner ads again that adaway usually blocked, and I have had a few other minor issues like GPS taking longer to connect or find where I am, wifi disconnects, and google not understanding what it usually does. Phone still works just fine, just minor issues I didn't really experience before.
I would like to completely reset the phone to clean it up, and re root and setup TWRP again, but im not sure how to safely do that since my phone was updated improperly (automatically). I have magisk still installed, but the modules dont seem to be working properly. Rebooting to recovery will reboot me to one plus recovery instead of twrp. When I restart is still says my boot loader is unlocked, and some apps (like chase mobile app) still say my phone is rooted. Oxygen updater says im up to date on OxygenOS 10.0.3.gm21aa.
What would be the best option for me to clean everything up, get my root modules working again, and have the phone fully up to date and stable? Any information would be greatly appreciated.
follow the same steps you followed first time. Boot to TWRP flash magisk, No need to factory reset. Flash twrp again if you want and reboot to system
Hi,
ive tried to root my Galaxy S10 via Magisk. Everything worked just fine, i patched the AP file thrue Magisk, istalled via ODIN and started the device like mentioned in the manuals. When i started the device the Magisk App appeared after some seconds, i pressed install and it installed. Now comes the strange thing. When i start the app it still seems like there is no root whatsoever. It doesnt ask me for anything else and it looks just like the same as before.
Does anyone know what to do?
thanks for your help in adcance
Don't nail me but I believe one must patch recovery and boot into recovery mode all the time. I know there was NEMESIS kernel that could boot straight into Magisk. also on github for the S10e issues there are some replies from dev to patch boot.img, which is contradictory to Magisk installation guide, so I don't know for sure.
Hi all
Sorry if I've missed something while searching, but is there any way to increase the bluetooth and/or headphone volume without installing something like viper? I have seen some magisk modules for OP6 and OP7 but nothing specific to this device. Unlocked BL, magisk rooted, Android 11.
TIA
Hi,
kinda new to custom ROMs and running into my first real problems.
I installed TWRP, LineageOS 20.0, BitGApps Basic and Magisk 26.1 on my Samsung Galaxy S10e Exynos.
After setup everything works extremely well and fast. I installed Universal SafetyNet Fix, Viper4Android (programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer. (github.com)) and Universal GMS Doze (gloeyisk/universal-gms-doze: Patches Google Play services app and its background processes to be able using battery optimization (github.com)). The phone still works fine and Viper4Android works too. SafetyNet also passes.
Now the problems arise. A few hours later and some reboots later, the phone won't boot anymore (maybe 20 reboots). I didn't even change any settings before the reboots. The boot animation plays and the phone is getting reset by a watchdog maybe. Also cannot use ADB during boot and the safe mode button combination doesn't work. I'm not experienced enough to understand the log files correctly. I already flashed the phone twice and the same problem occurred.
I attached some logs I could get from TWRP, but the main data partition is encrypted.
Full log files are here: logs.zip
Otherwise I'm extremely impressed with Lineage and would love to use it as my daily.
Thanks a lot for helping.
loriZyy said:
Hi,
kinda new to custom ROMs and running into my first real problems.
I installed TWRP, LineageOS 20.0, BitGApps Basic and Magisk 26.1 on my Samsung Galaxy S10e Exynos.
After setup everything works extremely well and fast. I installed Universal SafetyNet Fix, Viper4Android (programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer. (github.com)) and Universal GMS Doze (gloeyisk/universal-gms-doze: Patches Google Play services app and its background processes to be able using battery optimization (github.com)). The phone still works fine and Viper4Android works too. SafetyNet also passes.
Now the problems arise. A few hours later and some reboots later, the phone won't boot anymore (maybe 20 reboots). I didn't even change any settings before the reboots. The boot animation plays and the phone is getting reset by a watchdog maybe. Also cannot use ADB during boot and the safe mode button combination doesn't work. I'm not experienced enough to understand the log files correctly. I already flashed the phone twice and the same problem occurred.
I attached some logs I could get from TWRP, but the main data partition is encrypted.
Full log files are here: logs.zip
Otherwise I'm extremely impressed with Lineage and would love to use it as my daily.
Thanks a lot for helping.
Click to expand...
Click to collapse
If it is an issue with the ROM itself, you will need to post your issue in the ROM thread where you got your ROM and see if there is something in the ROM that the developer of the ROM needs to fix in the ROM itself.
Hi, kinda new to custom ROMs and tried out Lineage and later Crdroid on my Galaxy S10e Exynos.
The OS works fine but after a few restarts the phone randomly bootloops and I can't find any way to fix it.
Currently installed is Crdroid recovery, Crdroid latest (the same problem happens with Lineage) with Android 13, MindTheGapps, Magisk 25.2
Magisk modules are Zygisk, Viper4Android and Universal SafetyNet Fix.
I attached some logs but I'm too inexperienced too read them correctly. It looks like the file
Code:
/data/misc_de/0/apexdata/com.android.permission/runtime-permissions.xml
is corrupted after a few restarts?? The bootlogo just repeats and nothing is happening. The logs say that the zygote process has crashed.
Does anyone know what to do? Thanks a lot!
Logs: log.txt
This used to happen on my Galaxy A50 on another ROM too, and since it's not an S10e problem it's probably a Magisk module