Related
I think this is a bug.
Sorry if posting in the wrong spot. I wasn't clear from the dev instructions if the idea was to post there only if you ARE a dev/working on dev, or if it just meant dev-related. Anyhoo...
I upgraded my OPO to the newest Lineage 16 ROM, and for the most part, quite pleased. I think the NFC does not work though.
I use Google Pay, and I made sure by loading my Lineage 15.1 TWRP backup and tested--works fine (Root disabled from the settings necessary).
When I upgraded, I cleared caches, etc..., installed Lineage 16, then flashed the open gapps, then flashed Magisk. I installed the Magisk Manager app, then proceeded to try adding my cards back to Google Pay.
At first, despite SafetyNet passing, it did not work. However, after setting Magisk to Core Only mode, I was able to add my cards back in.
However, if I try to actually hold the phone up to a pay terminal, nothing happens, not even a denial...no vibration--nothing. I think, since I was able to add the cards successfully, and because it works in Lineage 15.1, that there's a problem with the new ROM and NFC in general. If it gave me the red !, I'd suspect root/Magisk, but it did nothing.
NFC should be fixed since today's build. Try updating your OS.
Has the NFC been fixed? Can't seem to find an answer. Don't want to update from 15 till it is.
HD8 2018 6.3.1.5 (and 6.3.1.4) issues
HD8 2018 OS continues to present never ending issues (seems like a poorly supported product compared to the earlier Fires ...)
I flashed 6.3.1.5 (6.3.1.4) on top of 6.3.1.2 via TWRP (+Magisk/systemless Xposed), and, ended up with a weird WiFi crashloop that took a few tries to understand. Essentially, the moment it connects to a WiFi network, it reboots. If I set WiFi to off, it's stable (have to do it quick before it connects after a reboot!). If I disable Xposed module, it's stable. Neither Xposed 89.3 or 90beta work correctly.
On 6.3.1.2 Xposed worked more or less OK.
I tried to downgrade back to OS 6.3.1.2 or 6.3.0.1, but apparently the settings are not compatible once you load 6.3.1.4 on it. It never reaches the launcher, and keeps sitting at Fire screen. I could not even boot 6.3.1.2 or 6.3.0.1 without Magisk. Doing a factory reset was not in my plan yet. So I had to go to 6.3.1.4 again where it booted fine. I now run 6.3.1.4 with Xposed disabled.
Anybody has 6.3.1.4 with Xposed & WiFi working properly out there? I wonder if this is also a similar issue with Fire 7 2019 (mustang) - @Michajin
HD10 2017 40.6.5.0_user_650601220 issues
Well, what do you know ... I finally took the plunge to do the unlock and install TWRP on my Kingoroot rooted HD10 2017 (thanks @k4y0z !). I backed up all the apps via Titanium Backup, and then backed up the internal sdcard via Total Commander to a zip, which later nicely restores things back with the proper timestamps (yay!). It's very difficult to restore timestamps, but Total Commander with root can do it.
In my optimism, after getting TWRP, I immediately installed the latest FireOS, 40.6.5.0_user_650601220, with Magisk, and Xposed installed into system (xposed-v89-sdk22-arm64.zip). And, just like HD8 2018, the moment I activated Xposed modules, the tablet started rebooting when WiFi was on. If I managed to hit WiFi off button before it did so, it seemed stable. So both HD10 2017 and HD8 2018 appear to have the same Xposed bug in the latest FireOS versions!!! I wonder if it's related to the fix of MTK-SU issue.
I also ran into Google Play & battery drain issues. Tired of several attempts of troubleshooting, I actually ended up backtracking all the way to 40.6.2.6_user_626533320, which is the version I started with. Once Google Play went south after my 1st restore, I could not fix it over multiple tries, and I had to do a Factory reset again and restore apps via Titanium Backup a bit more carefully, starting with the latest versions of Google Play apps without data (rather than just all at once). Now everything appears to be working as before, with TWRP, and the same old FireOS version that I already had
The battery drain issue was an interesting one, apparently, Vanced Youtube helper app, microg_YouTube_Vanced_0.2.6.17455, creates a lot of battery drain via needless Wakelocks, which can be fixed by running the following commands:
Code:
adb shell
su
pm disable com.mgoogle.android.gms/org.microg.gms.people.ContactSyncService
P.S. A week ago I unlocked HD8 2017 (OS version 50.6.3.6_user_636558520), and successfully cloned HD8 2016 to this 2017 via TiBa & Total Commander. That attempt went without a glitch, and that's why I thought I could also do HD10 in no time, but HD10 gave me all kinds of issues.
bibikalka said:
HD8 2018 OS continues to present never ending issues (seems like a poorly supported product compared to the earlier Fires ...)
I flashed 6.3.1.4 on top of 6.3.1.2 via TWRP (+Magisk/systemless Xposed), and, ended up with a weird WiFi crashloop that took a few tries to understand. Essentially, the moment it connects to a WiFi network, it reboots. If I set WiFi to off, it's stable (have to do it quick before it connects after a reboot!). If I disable Xposed module, it's stable. Neither Xposed 89.3 or 90beta work correctly.
On 6.3.1.2 Xposed worked more or less OK.
I tried to downgrade back to OS 6.3.1.2 or 6.3.0.1, but apparently the settings are not compatible once you load 6.3.1.4 on it. It never reaches the launcher, and keeps sitting at Fire screen. I could not even boot 6.3.1.2 or 6.3.0.1 without Magisk. Doing a factory reset was not in my plan yet. So I had to go to 6.3.1.4 again where it booted fine. I now run 6.3.1.4 with Xposed disabled.
Anybody has 6.3.1.4 with Xposed & WiFi working properly out there? I wonder if this is also a similar issue with Fire 7 2019 (mustang) - @Michajin
Click to expand...
Click to collapse
you will have to refresh me where i had on the mustang. I am using los 16.0 on the hd8, dont really have a need for xposed. Seems like i had this on the mustang right after root when on stock? i will look into it and try and refresh myself if you cant point me into the thread...
Michajin said:
you will have to refresh me where i had on the mustang. I am using los 16.0 on the hd8, dont really have a need for xposed. Seems like i had this on the mustang right after root when on stock? i will look into it and try and refresh myself if you cant point me into the thread...
Click to expand...
Click to collapse
It was here :
https://forum.xda-developers.com/showpost.php?p=79841222&postcount=21
bibikalka said:
It was here :
https://forum.xda-developers.com/showpost.php?p=79841222&postcount=21
Click to expand...
Click to collapse
I am trying to remember but it seems i had to flash full xposed from TWRP. I think i had issues with the systemless version from magisk. I didn't know people would chose to run FIRE-OS once anything else was available (no offense) with 14.1 and 16, both being decent... lol
Michajin said:
I am trying to remember but it seems i had to flash full xposed from TWRP. I think i had issues with the systemless version from magisk. I didn't know people would chose to run FIRE-OS once anything else was available (no offense) with 14.1 and 16, both being decent... lol
Click to expand...
Click to collapse
You have a point here regarding LoS I thought I was gaining stability by sticking to FireOS, but this version has been anything but stable!
I need Skype to work - is the camera working in either LoS 14.1 or 16? The issue is that some of these ROMs seem to be in eternal beta, once the low hanging fruit is done, the polish is not applied further.
bibikalka said:
You have a point here regarding LoS I thought I was gaining stability by sticking to FireOS, but this version has been anything but stable!
I need Skype to work - is the camera working in either LoS 14.1 or 16? The issue is that some of these ROMs seem to be in eternal beta, once the low hanging fruit is done, the polish is not applied further.
Click to expand...
Click to collapse
The camera works on both 16.0 and 14.1. But 14.1 is by far more stable at this time. Bluetooth and headphones (plus more- see thread) issues on 16.0. The only issue on 14.1 is the headphone jack doesn't work (but i think someone has found a fix for it but it hasnt been updated in the rom). Backup in TWRP and install 14.1 and give it a shot, i am on 16.0. 14.1 was working really smooth. I have not tested skype on either. 14.1 seemed smoother and less buggy than fireOS right at Beta.
bibikalka said:
You have a point here regarding LoS I thought I was gaining stability by sticking to FireOS, but this version has been anything but stable!
I need Skype to work - is the camera working in either LoS 14.1 or 16? The issue is that some of these ROMs seem to be in eternal beta, once the low hanging fruit is done, the polish is not applied further.
Click to expand...
Click to collapse
Observation regarding custom ROMs is one reason I typically hang with 'stock' and tune to my liking. LOS 14.1 for this device/gen (and a few others) is an exception; worth considering. LOS 16.1 is less refined ATM with no meaningful advantage over 14.1.
bibikalka said:
You have a point here regarding LoS I thought I was gaining stability by sticking to FireOS, but this version has been anything but stable!
I need Skype to work - is the camera working in either LoS 14.1 or 16? The issue is that some of these ROMs seem to be in eternal beta, once the low hanging fruit is done, the polish is not applied further.
Click to expand...
Click to collapse
I needed to have headphones working, so I didn't try LOS 14 until recently. I'm extremely happy with it. It's so much snappier than stock for me, and videos load so much faster, like in Netflix, for example. I'm also using Magisk and Xposed with no issues.
I didn't realize the new build is up with fixes... Going back to 14.1, I think he is working on 17.0 (Kaijones23) 17.0 was updated last night....
https://github.com/mt8163/android_device_amazon_karnak/branches
Noob question - how do you flash lineage-16 or cm-14.1 onto the device? I downloaded the zip files from the link above, but they are way to small to be a complete rom. Is there a different location where I can download the roms?
xantiux said:
Noob question - how do you flash lineage-16 or cm-14.1 onto the device? I downloaded the zip files from the link above, but they are way to small to be a complete rom. Is there a different location where I can download the roms?
Click to expand...
Click to collapse
Have you unlocked the bootloader (prerequisite):
https://forum.xda-developers.com/hd...nlock-fire-hd-8-2018-karnak-amonet-3-t3963496
I have unlocked the bootloader, for which I had to open the tablet up in order to short a pin. I was able to load the FireOS 6.0.0.0 and 6.0.0.1, and was looking if there is a way to load 6.0.1.2 or 6.0.1.4, when I came upon this thread, and saw that it may be possible to load lineage or cm, but I don't know how to get my hands on the ROMs. The downloads from the links above are way too small.
xantiux said:
I have unlocked the bootloader, for which I had to open the tablet up in order to short a pin. I was able to load the FireOS 6.0.0.0 and 6.0.0.1, and was looking if there is a way to load 6.0.1.2 or 6.0.1.4, when I came upon this thread, and saw that it may be possible to load lineage or cm, but I don't know how to get my hands on the ROMs. The downloads from the links above are way too small.
Click to expand...
Click to collapse
This help?
https://forum.xda-developers.com/hd8-hd10/general/lineageos-14-1-fire-hd8-2018-t3936242
https://forum.xda-developers.com/hd8-hd10/orig-development/rom-lineage-16-0-t3981685
This is great, thank you!
Somewhat related question - is it hard to get a zip of fireOS 6.3.1.2, so it can be flashed via TWRP?
xantiux said:
This is great, thank you!
Somewhat related question - is it hard to get a zip of fireOS 6.3.1.2, so it can be flashed via TWRP?
Click to expand...
Click to collapse
Supposedly renaming .bin to .zip allows flashing from twrp. I'd be wary of other partitions such as recovery and aboot which could trigger a bad day.
Headphone fix for LOS 14 has been applied in the latest version of the ROM. If you don't feel like reflashing entire ROM, there is a flashable zip containing only the headphone fix (module). I don't have the links handy but it's all available on this forum.
Updated post #1 and described HD10 '17 Xposed WiFi crashloop as well.
Updated with the same HD8 2018 6.3.1.5 WiFi/Xposed issue.
bibikalka said:
Updated with the same HD8 2018 6.3.1.5 WiFi/Xposed issue.
Click to expand...
Click to collapse
Welcome back!
Hello! I have had my One plus 7 pro international running for months now, rooted, following this guide https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-bootloader-unlock-twrp-install-t3940368. I had the OTA update notification for quite some time now, but I ignored it because I was lazy. A few weeks ago my phone must have auto updated however, as I started noticing banner ads again that adaway usually blocked, and I have had a few other minor issues like GPS taking longer to connect or find where I am, wifi disconnects, and google not understanding what it usually does. Phone still works just fine, just minor issues I didn't really experience before.
I would like to completely reset the phone to clean it up, and re root and setup TWRP again, but im not sure how to safely do that since my phone was updated improperly (automatically). I have magisk still installed, but the modules dont seem to be working properly. Rebooting to recovery will reboot me to one plus recovery instead of twrp. When I restart is still says my boot loader is unlocked, and some apps (like chase mobile app) still say my phone is rooted. Oxygen updater says im up to date on OxygenOS 10.0.3.gm21aa.
What would be the best option for me to clean everything up, get my root modules working again, and have the phone fully up to date and stable? Any information would be greatly appreciated.
follow the same steps you followed first time. Boot to TWRP flash magisk, No need to factory reset. Flash twrp again if you want and reboot to system
Hello everyone. Long time since I had an android device and I'm cutting the chains of my iPhone wanting to be de-Googled and de-Appled. I was running Lineage 17.1 from Microg and thought I had everything working on it until I started updating some software on my phone over the air. I rebooted and it went to bootloop. Since then I re-installed 17.1 and got things working again. I just upgraded to 18.1 and want to make sure it's all set up properly and won't have any errors.
Magisk says SafetyNet has an "SafetyNet API Error." "Basicintegrity, ctsProfile, evalType N/A." all in red when I check if it's working. I've done some digging, but want to make sure I do this right. I need to get the boot.img file from the original firmware. Should I get this from the oneplus website, or should I be looking for something else since I have Lineage? Can anyone provide the raw boot.img file for the OnePlus 7 Pro that I should use? I'm a little overwhelmed with all of the steps to extract it from the original firmware. Please and thanks for any help getting this phone set up the way I need it to work!
That error show when safety net API download was incomplete/corrupt, you can try to erase data from magisk manager and check safetynet again but with a better internet connection or use another magisk version like canary
And if you end in a bootloop for any magisk module just turn off your device and in your computer in a CMD/powershell/terminal window enter this command
adb wait-for-device shell magisk --remove-modules
Then connect and turn on your phone and automatically your phone will reboot with all your magisk modules disabled
Use magisk canary bro,,,
I sideloaded Canary and still get the red SafetyNet API error screen after opening it. Can someone direct me to a full tutorial on how Magisk works and what the modules do? I'm thinking I might need to do a full uninstall of Magisk and start over. If I do this will I lose all the data on the phone and have to start from scratch? Thanks for your help so far!
Well I've spent several hours researching tutorials and typing in codes via Terminal on my Mac and have gotten the phone restocked twice and working normal on stock OS, but after putting TWRP on it and then installing Lineage 18.1 it goes into a Lineage logo boot loop. What am I missing here?
It seems to me that TWRP is not compatible with Lineage. Sometimes when I rebooted the phone and was playing with the Recovery.IMG I saw the Lineage Recovery, then other times the TWRP would flash on and off in a boot loop. I have been careful about using the command " ./fastboot boot TWRP.img " and not "flash" TWRP, as would be the case for non a/b storage devices. On a couple occasions I could reboot with the Lineage Recovery.IMG and it would boot to startup, but if I rebooted to Recovery from the home screen, it would get stuck on TWRP.
I'm probably just missing something simple, but what might I be doing wrong? Is it the timing of installing TWRP and then installing Lineage in the same TWRP session?
This all stemmed from me wanting to get TWRP with Lineage 18.1 and getting Magisk and Microg working correctly for a "de-googled" phone with working apps. I'm frustrated, but will keep trying if I can get some direction. Thanks for your input.
-L
Lear31pilot said:
Well I've spent several hours researching tutorials and typing in codes via Terminal on my Mac and have gotten the phone restocked twice and working normal on stock OS, but after putting TWRP on it and then installing Lineage 18.1 it goes into a Lineage logo boot loop. What am I missing here?
It seems to me that TWRP is not compatible with Lineage. Sometimes when I rebooted the phone and was playing with the Recovery.IMG I saw the Lineage Recovery, then other times the TWRP would flash on and off in a boot loop. I have been careful about using the command " ./fastboot boot TWRP.img " and not "flash" TWRP, as would be the case for non a/b storage devices. On a couple occasions I could reboot with the Lineage Recovery.IMG and it would boot to startup, but if I rebooted to Recovery from the home screen, it would get stuck on TWRP.
I'm probably just missing something simple, but what might I be doing wrong? Is it the timing of installing TWRP and then installing Lineage in the same TWRP session?
This all stemmed from me wanting to get TWRP with Lineage 18.1 and getting Magisk and Microg working correctly for a "de-googled" phone with working apps. I'm frustrated, but will keep trying if I can get some direction. Thanks for your input.
-L
Click to expand...
Click to collapse
TWRP is not working for OOS11 or A11 ROMs using Oos11 blobs.
Lossyx said:
TWRP is not working for OOS11 or A11 ROMs using Oos11 blobs.
Click to expand...
Click to collapse
Got it! I'll go back to 17.1 Thanks!
Bump
Still trying to find a solution. I get fairly far into flashing the ROM, getting TWRP working and then end up stuck at Microg not letting me open the location menu. If only there were a guide with start to finish Lineage 17.1 or 18.1 with Microg and Magisk for my OnePlus 7 Pro. I find some guides, but there isn't one that encompasses everything that actually works. I'm going to try Lineage 18.1 with Microg built in and then flash Magisk.
Lear31pilot said:
Bump
Still trying to find a solution. I get fairly far into flashing the ROM, getting TWRP working and then end up stuck at Microg not letting me open the location menu. If only there were a guide with start to finish Lineage 17.1 or 18.1 with Microg and Magisk for my OnePlus 7 Pro. I find some guides, but there isn't one that encompasses everything that actually works. I'm going to try Lineage 18.1 with Microg built in and then flash Magisk.
Click to expand...
Click to collapse
I never installed lineage but i guess you can flash the ROM, change slots, then format data(this will erase all your stuff) and flash magisk then reboot into system
And for the safety net error yesterday was released a "fix" for that so try again
RokCruz said:
I never installed lineage but i guess you can flash the ROM, change slots, then format data(this will erase all your stuff) and flash magisk then reboot into system
And for the safety net error yesterday was released a "fix" for that so try again
Click to expand...
Click to collapse
Thank you. I'll have to address this at some point. I got the phone restocked, and flashed 18.1 Lineage on it again. Got all my apps and accounts back up on it. I'm just debating running Magisk again knowing that I'll likely have to start from scratch again. I wasn't able to get TWRP working correctly, so I left Lineage Recovery on, so it will be some time before I try going through this again. I'm going to do some research on what exactly is happening when I put recoveries and ROMs on different slots. Same goes for the Magisk. It's all quite new to me with the "slots" and what information has to go on which slot. I also need to find out how to backup my apps so if I re-flash a ROM, it's not so painful to get my data back on the phone.
At least I have a working phone without a Google login and most of the apps I want work. I'm only missing Lyft and my bank app. Again, thanks for the reply, and I'll look into this when I have some time to play with the phone again.
Lear31pilot said:
Thank you. I'll have to address this at some point. I got the phone restocked, and flashed 18.1 Lineage on it again. Got all my apps and accounts back up on it. I'm just debating running Magisk again knowing that I'll likely have to start from scratch again. I wasn't able to get TWRP working correctly, so I left Lineage Recovery on, so it will be some time before I try going through this again. I'm going to do some research on what exactly is happening when I put recoveries and ROMs on different slots. Same goes for the Magisk. It's all quite new to me with the "slots" and what information has to go on which slot. I also need to find out how to backup my apps so if I re-flash a ROM, it's not so painful to get my data back on the phone.
At least I have a working phone without a Google login and most of the apps I want work. I'm only missing Lyft and my bank app. Again, thanks for the reply, and I'll look into this when I have some time to play with the phone again.
Click to expand...
Click to collapse
TWRP can't boot in devices with OOS 11 blobs and encrypted data, for Magisk the only way I can imagine is using a patched boot.img.
Make a backup of your current boot.img(lineage) with apps like Franco kernel, then Patch it with magisk, then flash it in fastboot (fastboot flash boot boot.img)
if something woes wrong you can restore the backup from Franco kernel
RokCruz said:
TWRP can't boot in devices with OOS 11 blobs and encrypted data, for Magisk the only way I can imagine is using a patched boot.img.
Make a backup of your current boot.img(lineage) with apps like Franco kernel, then Patch it with magisk, then flash it in fastboot (fastboot flash boot boot.img)
if something woes wrong you can restore the backup from Franco kernel
Click to expand...
Click to collapse
Thanks RokCruz,
I'm going to get 18.1 back on with the LOS Recovery again. I'll try the boot patch method with the LOS boot.img from 18.1 for Magisk. I haven't tried the Franco kernel as I just now found out about it. I don't really need to do anything else fancy with the phone in terms of overclocking or underclocking. Does that kernel facilitate easier backups? I'm still learning a LOT about how Android works. It's been a steep learning curve. Fortunately, I can get myself out of any binds with a restock and fastboot!
Lear31pilot said:
Thanks RokCruz,
I'm going to get 18.1 back on with the LOS Recovery again. I'll try the boot patch method with the LOS boot.img from 18.1 for Magisk. I haven't tried the Franco kernel as I just now found out about it. I don't really need to do anything else fancy with the phone in terms of overclocking or underclocking. Does that kernel facilitate easier backups? I'm still learning a LOT about how Android works. It's been a steep learning curve. Fortunately, I can get myself out of any binds with a restock and fastboot!
Click to expand...
Click to collapse
Yes only for boot backups, I always made a backup of my boot.img of every OB just in case something goes wrong but i have never experienced that.
I personally prefer OOS, just install custom kernel and some mods like Cyberpunk 2077 theme, Riru Lsposed and a adbloker and that's all I need
RokCruz said:
Yes only for boot backups, I always made a backup of my boot.img of every OB just in case something goes wrong but i have never experienced that.
I personally prefer OOS, just install custom kernel and some mods like Cyberpunk 2077 theme, Riru Lsposed and a adbloker and that's all I need
Click to expand...
Click to collapse
I'm trying to de-google. Can I de-google on OOS? Most stock ROMs require a google login.
Lear31pilot said:
I'm trying to de-google. Can I de-google on OOS? Most stock ROMs require a google login.
Click to expand...
Click to collapse
I guess you can, just use a debloater
But it's better to install HydrogenOS just disable Chinese apps, install micro g and it's complements and you can run any Google dependant app, safety net passes without problems too.
I installed hydrogen and it runs smoothly but Cyberpunk isn't available for it so I reinstalled OOS
RokCruz said:
I guess you can, just use a debloater
But it's better to install HydrogenOS just disable Chinese apps, install micro g and it's complements and you can run any Google dependant app, safety net passes without problems too.
I installed hydrogen and it runs smoothly but Cyberpunk isn't available for it so I reinstalled OOS
Click to expand...
Click to collapse
Thanks for the tip about Hydrogen. I'll do some research on that. And thanks for getting back so quickly. The Android community really has some great people. Happy to be apart of it!
So
Lear31pilot said:
Thanks for the tip about Hydrogen. I'll do some research on that. And thanks for getting back so quickly. The Android community really has some great people. Happy to be apart of it!
Click to expand...
Click to collapse
So at the end of the day, I ended up with HydrogenOS 11 and have F-Droid and Aurora Store installed and working fine. I didn't/don't need Magisk or MicroG since HOS apparently is OK'd by google and all of my apps work.
So this worked perfectly for me. I have a fully functional OS and no Google sign-in needed. I did as you said and just deleted the Chinese bloat apps. I can't manage to get rid of the "Market" app though.
Lyft works and all of my location requiring apps like Waze work as well. Thanks for pointing me in the right direction.
Question: Will OxygenOS work the same without a google login? If so, what would be the advantage of HOS vs OOS? HOS 11 has an entire section devoted to a Google login for different services. I left it blank, but just wondering what the difference would be on OOS.
Lear31pilot said:
So
So at the end of the day, I ended up with HydrogenOS 11 and have F-Droid and Aurora Store installed and working fine. I didn't/don't need Magisk or MicroG since HOS apparently is OK'd by google and all of my apps work.
So this worked perfectly for me. I have a fully functional OS and no Google sign-in needed. I did as you said and just deleted the Chinese bloat apps. I can't manage to get rid of the "Market" app though.
Lyft works and all of my location requiring apps like Waze work as well. Thanks for pointing me in the right direction.
Question: Will OxygenOS work the same without a google login? If so, what would be the advantage of HOS vs OOS? HOS 11 has an entire section devoted to a Google login for different services. I left it blank, but just wondering what the difference would be on OOS.
Click to expand...
Click to collapse
Market can be disabled if my mind serve me right, OOS could end in a bootloop if we remove all Google apps so it's better not to do that.
I never see that section, I only installed OB1 and OB2 and never see that.
And remember you need to install magisk in order to pass safetynet.
RokCruz said:
Market can be disabled if my mind serve me right, OOS could end in a bootloop if we remove all Google apps so it's better not to do that.
I never see that section, I only installed OB1 and OB2 and never see that.
Click to expand...
Click to collapse
Looks like I'm denied the ability to disable the Market App.
Photo's attached for the Google settings I have available on HOS 11.
Also unable to make the microphone work in the keyboard for voice to text, but I have a feeling I won't be able to make that work without logging in to Google. Currently looking for some workarounds.
What will passing Safetynet allow me to do that I'm not already able to do now? Use banking apps and "tap to pay" type apps? I haven't found my bank app on the Aurora Store just yet. "US Bank" if it makes a difference.
I'll continue to play with this OS, but so far, it seems the easiest to get working right from the get-go.
Preamble / RamblingHello dear xda-community,
I am a little desperate right now. After hours of searching for solutions I am sadly out of luck and afraid I might destroy the system if I try to solve this issue any further by my own. :/
By no means I am an expert in flashing / rooting mobile devices, so please forgive me if I did something stupid.
But with that out of the way I hope you can help me. Thank you already for your efforts.
Have a great day,
TheAverageUser
The ProblemWhen trying to connect to a WiFi the connection disrupts and apparently the entire network management component (?) crashes and restarts.
I suspect it of crashing because the connection to the internet via my SIM card is disconnected as well for a short period of time after the WiFi tries to connect to a base station.
How I got here
Upgraded from LOS 17.1 to 18.1 like so
Installed TWRP as described here
Installed Magisk as described in the "Custom Recovery" section of this guide
Additional Information
After upgrading to LOS 18.1 I noticed that Magisk did not work anymore, so I tried to find a way to re-root my device.
A long search later I decided that I needed TWRP in order to root the device as many guides I found required this to be the case. Sadly I can't remember how I rooted the device the first time.
The mentioned method for installing Magisk seemed to be the only one working for me. (I did not find anything better.)
I would love to fix my current OS without having to start over, because setting it up again is very tedious.
Previous Setup (Before Upgrade)
OnePlus 6 (obviously ^^)
Lineage OS 17.1
Magisk
Lineage Recovery
Updates:
#1 Okay. Now I am even more confused. The phone just connected to my WiFi and it seems to work. I didn't do anything as of yet. I am going to investigate further to find out when exactly the connections fail. Honestly I don't like a 50:50 chance of it working ^^ (Just to be clear. My problem is not fixed as of yet.)
#2 For some reason the WiFi is now working. The only thing that I can think of which might have solve the issue is that I have uninstalled and reinstalled the "F-Droid Privilgeded Extension" for Magisk.
TheAverageUser said:
Preamble / RamblingHello dear xda-community,
I am a little desperate right now. After hours of searching for solutions I am sadly out of luck and afraid I might destroy the system if I try to solve this issue any further by my own. :/
By no means I am an expert in flashing / rooting mobile devices, so please forgive me if I did something stupid.
But with that out of the way I hope you can help me. Thank you already for your efforts.
Have a great day,
TheAverageUser
The ProblemWhen trying to connect to a WiFi the connection disrupts and apparently the entire network management component (?) crashes and restarts.
I suspect it of crashing because the connection to the internet via my SIM card is disconnected as well for a short period of time after the WiFi tries to connect to a base station.
How I got here
Upgraded from LOS 17.1 to 18.1 like so
Installed TWRP as described here
Installed Magisk as described in the "Custom Recovery" section of this guide
Additional Information
After upgrading to LOS 18.1 I noticed that Magisk did not work anymore, so I tried to find a way to re-root my device.
A long search later I decided that I needed TWRP in order to root the device as many guides I found required this to be the case. Sadly I can't remember how I rooted the device the first time.
The mentioned method for installing Magisk seemed to be the only one working for me. (I did not find anything better.)
I would love to fix my current OS without having to start over, because setting it up again is very tedious.
Previous Setup (Before Upgrade)
OnePlus 6 (obviously ^^)
Lineage OS 17.1
Magisk
Lineage Recovery
Updates:
#1 Okay. Now I am even more confused. The phone just connected to my WiFi and it seems to work. I didn't do anything as of yet. I am going to investigate further to find out when exactly the connections fail. Honestly I don't like a 50:50 chance of it working ^^ (Just to be clear. My problem is not fixed as of yet.)
Click to expand...
Click to collapse
Is it not because of your base OOS version?
Just do this and you are 100% okay.
1. Use MSM Tool here (it is like a full factory reset with a clean install - you have to unlock your bootloader again!!!)
2. Download latest OOS Full Update here, latest TWRP here, NikGapps here (Magisk if you like) and copy them into Device
3. Flash OOS, TWRP & Reboot to Recovery
4. Flash OOS, TWRP & Reboot to Recovery
5. Flash LOS-ROM, TWRP & Reboot to Recovery
6. Flash NikGapps (and Magisk) & get back to Menu
7. Select Wipe and just swipe to wipe data
8. Reboot to system
9. Done
Hello @tiga016 and @Pundy,
so here is an update on my situation:
For some reason the WiFi is now working. The only thing that I can think of which might have solve the issue is that I have uninstalled and reinstalled the "F-Droid Privilgeded Extension" for Magisk.
@Pundy
Thank you very much for this guide. For now I will continue to use my device in its current state, but as soon as I try to do a major update I will come back to your guide in order to install everything in a clean manner.
@tiga016
Thank you for your interest in my issue. For now I will consider this problem to be solved.
Pundy said:
Just do this and you are 100% okay.
1. Use MSM Tool here (it is like a full factory reset with a clean install - you have to unlock your bootloader again!!!)
2. Download latest OOS Full Update here, latest TWRP here, NikGapps here (Magisk if you like) and copy them into Device
3. Flash OOS, TWRP & Reboot to Recovery
4. Flash OOS, TWRP & Reboot to Recovery
5. Flash LOS-ROM, TWRP & Reboot to Recovery
6. Flash NikGapps (and Magisk) & get back to Menu
7. Select Wipe and just swipe to wipe data
8. Reboot to system
9. Done
Click to expand...
Click to collapse
Hello Pundy,
I have updated from LOS 17.1 to 18.1 (clean install) sadly wifi was not working with 17.1 and also not with 18.1. Therefore I have installed OOS (without TWRP) one of the latest version and made an update via wifi to the current version. So wifi is ok. Following the LOS howto, I was successful in installing the latest LOS BUT again wifi is not working...
Sadly also using the MSM Tool is not working. The MSM Tool does not connect with the OP6 (Sahara problem). I have tried it many times...
Any alternative?
BR Martin