Database Info

[q] rescue mode

Hi guys,
I'm in a trouble....
I own a TL10 phone..
flashed international system and recovery and fastboot..
after rebooting..
now is in rescue mode
"error:
func NO: 10 (func_boot_recovery)
ERROR NO 2"
tried to connect to hisuite tool but it doesn't recognise the device...
tried a restore holding power + vol+ + vol-
but it fails..
any help?

Did you tried 3buttons method? If now working, you must find the way to flash the stock recovery (correct one) trough adb commands (provided that your PC recognise the HAM7 via USB).
Sent from my S5+ using XDA Free mobile app

Or try connect.to HiSuite?

Simona Simmy said:
Or try connect.to HiSuite?
Click to expand...
Click to collapse
Hisuite doesn't recognize the ham7!
tuddu said:
Did you tried 3buttons method? If now working, you must find the way to flash the stock recovery (correct one) trough adb commands (provided that your PC recognise the HAM7 via USB).
Sent from my S5+ using XDA Free mobile app
Click to expand...
Click to collapse
3 buttons starts the update but it stops after a couple of minutes..
adb i don't think it will work..
this is the situation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did u check that link what is on your screen faq user guide how to ? You might read out something from there..
Do you have stock recovery flashed ? Or you have CWM flashed currently ?

Rescue
Same problem, Solution: Download the last firmware on the huawei site support e load it on microsd card (with folder). Insert sd card e then press 3 button to upgrade/restore firmware from microsd card

Simona Simmy said:
Did u check that link what is on your screen faq user guide how to ? You might read out something from there..
Do you have stock recovery flashed ? Or you have CWM flashed currently ?
Click to expand...
Click to collapse
spyuz85 said:
Same problem, Solution: Download the last firmware on the huawei site support e load it on microsd card (with folder). Insert sd card e then press 3 button to upgrade/restore firmware from microsd card
Click to expand...
Click to collapse
tried but nothing happen with 3 buttons procedure..
start the upgrade then stops..

tufoz said:
tried but nothing happen with 3 buttons procedure..
start the upgrade then stops..
Click to expand...
Click to collapse
maybe i had the cmw recovery.... actually i don't remember..

3buttons procedure works with stock recovery only. Download your ROM (right one) from the official website, extract the RECOVERY trough the proper software (search in this forum for it) and glash the stock recovery in place via adb commands.

tuddu said:
3buttons procedure works with stock recovery only. Download your ROM (right one) from the official website, extract the RECOVERY trough the proper software (search in this forum for it) and glash the stock recovery in place via adb commands.
Click to expand...
Click to collapse
adb device .. no device in my list..
so it's bricked!

Try reinstalling the usb driver. Try another pc windows. When "adb device" is shown, you're done.

Hello, I just bricked my phone yesterday, i have just figured out how to enter fastboot mode while its bricked!
Just do this;
connect your phone and see bricked rescue mode screen,
while the phone is connected to pc, press and hold: Volume Down + Power buttons.
but i still cant repair the rescue mode...

EzerchE said:
Hello, I just bricked my phone yesterday, i have just figured out how to enter fastboot mode while its bricked!
Just do this;
connect your phone and see bricked rescue mode screen,
while the phone is connected to pc, press and hold: Volume Down + Power buttons.
but i still cant repair the rescue mode...
Click to expand...
Click to collapse
Hi, did you manage to repair your phone, i have the same problem.

omarbas said:
Hi, did you manage to repair your phone, i have the same problem.
Click to expand...
Click to collapse
Sadly no. I dont think there is a solution for that at least for now, because the missing files or modules cannot be flashed via fastboot i think.
I flashed all img files I can, but it didnt work. May be a custom rom with zip file can work, but there is no custom rom with android-info.txt for Mate 7.

EzerchE said:
Sadly no. I dont think there is a solution for that at least for now, because the missing files or modules cannot be flashed via fastboot i think.
I flashed all img files I can, but it didnt work. May be a custom rom with zip file can work, but there is no custom rom with android-info.txt for Mate 7.
Click to expand...
Click to collapse
Hi,
I found this custom roms might work, if it work with you please let me know.
http://huaweinews.com/2015/03/mate-7-custom-rom/
http://www.needrom.com/download/ascend-mate-7-mt7-ul00-miui/
http://www.romzj.com/rom/26138.htm#rom-des-title
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=74

omarbas said:
Hi,
I found this custom roms might work, if it work with you please let me know.
http://huaweinews.com/2015/03/mate-7-custom-rom/
http://www.needrom.com/download/ascend-mate-7-mt7-ul00-miui/
http://www.romzj.com/rom/26138.htm#rom-des-title
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=74
Click to expand...
Click to collapse
I dont have the bricked device anymore, I returned it to seller.

EzerchE said:
I dont have the bricked device anymore, I returned it to seller.
Click to expand...
Click to collapse
Hi all,
I had the same problem after flashing the wrong recovery.img.
I was on CWM.
What I did was simply download the right CWM image, and flash it using flashify, after exiting the rescue mode through power and volume down...

dekraan said:
Hi all,
I had the same problem after flashing the wrong recovery.img.
I was on CWM.
What I did was simply download the right CWM image, and flash it using flashify, after exiting the rescue mode through power and volume down...
Click to expand...
Click to collapse
If we can't get the phone to boot then we can't use flashify

I have same problem is there any one fix it

Hi did you try one-key recovery via Hisuite i think this will resolve you problem
Download the chinese version of hisuite (4.0 i think), in the welcome panel there is a button called one-key recovery this will flash the rom of your device.
you have to put your device in fastboot mode
hope this will help you

[RECOVERY][TWRP]TWRP 3.0.2-0 for HUAWEI TAG-L01 (P8 lite smart/GR3/Enjoy 5S)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi everyone, i've started developing for this device, don't worry about his name(he has different name in different country), if your device model numer is "HUAWEI TAG-L01" you can use this recovery
You can also if you have TAG-Lxx but if you install a zip that check device it will found a TAG-L01
Remember, first you have to unlock the bootloader or it won't boot!! see this thread
DOWNLOAD
INSTALL INSTRUCTIONS
-reboot into bootloader(you can using "adb reboot bootloader" or by pressing volume down and power and selecting fastboot mode)
-type "fastboot flash recovery recoveryimage" (i suggest to drag and drop your image to the console so you don't have to worry about folders)
-presso volume up and power for some seconds and select recovery mode, allow twrp to write system(to prevent stock rom to re-flash stock recovery)
Thanks to:
androidlover5842 for his help
SOURCES
device tree
vendor tree

V2
deleted boot partition from wipe menu(no need)
Changed device name to the real one(HWTAG-L6753)
Download is in the first post

twrp now root is must easy

can you port twrp for phicomm e653 4g

here your thing
View attachment build.zip

mac12m99 said:
Hi everyone, i've started developing for this device, don't worry about his name(he has different name in different country), if your device model numer is "HUAWEI TAG-L01" you can use this recovery
You can also if you have TAG-Lxx but if you install a zip that check device it will found a TAG-L01
Remember, first you have to unlock the bootloader or it won't boot!! see this thread
DOWNLOAD
INSTALL INSTRUCTIONS
-reboot into bootloader(you can using "adb reboot bootloader" or by pressing volume down and power and selecting fastboot mode)
-type "fastboot flash recovery recoveryimage" (i suggest to drag and drop your image to the console so you don't have to worry about folders)
-presso volume up and power for some seconds and select recovery mode, allow twrp to write system(to prevent stock rom to re-flash stock recovery)
Thanks to:
androidlover5842 for his help
SOURCES
device tree
vendor tree
Click to expand...
Click to collapse
Works excellent on Huawei GR3 TAG-L23

Hello guys dose this support GR 3 2017 model number PAR-LA1 ?

Aaron Turkman said:
Hello guys dose this support GR 3 2017 model number PAR-LA1 ?
Click to expand...
Click to collapse
No, it has a different cpu

mac12m99 said:
No, it has a different cpu
Click to expand...
Click to collapse
So bro where I can find a thread for my device I search XDA without result

Aaron Turkman said:
So bro where I can find a thread for my device I search XDA without result
Click to expand...
Click to collapse
Sorry but don't exist, no developer has created one

mac12m99 said:
Sorry but don't exist, no developer has created one
Click to expand...
Click to collapse
Thanks bro

Help!
Some recovery for the TAG-L13? The one in this post does not work for me on my device. Any suggestions?

EnriqueGlezMata said:
Some recovery for the TAG-L13? The one in this post does not work for me on my device. Any suggestions?
Click to expand...
Click to collapse
Have you unlocked bootloader first?

please help me
my phone p8 lite tag-L01 is dead total
my pc detect MTK USB PORT

mac12m99 said:
No, it has a different cpu
Click to expand...
Click to collapse
Hello guys dose this support GR 3 model number TAG-L32 ?

Diskiedinya said:
Hello guys dose this support GR 3 model number TAG-L32 ?
Click to expand...
Click to collapse
Yes, is the same phone.
Please tell me if not

mac12m99 said:
Yes, is the same phone.
Please tell me if not
Click to expand...
Click to collapse
can you tell me how to get into fastboot mode huawei gr3 tag-l32 ? pleaseee

I am having a problem and cannot find the source.
I have the L22 and have the correct code for unlocking and the phone reports "Unlock pass", factory resets and then reboots.
When I boot back into the bootloader and type "fastboot oem get-bootinfo", it reports "(bootloader) unlocked, not unlocked:yes. Once booted, developer options reports it is still unlocked.
I have attempted to flash a couple of versions of TWRP, they copy and all is reported fine, yet the phone remains on stock recovery.
Any ideas?
Thanks for any help, I'm stumped.
Found a solution: Do not reboot the phone via adb/fastboot, instead after flashing, hold down the power button to restart. Then you may enter TWRP/recovery in the normal manner. For some reason when you reboot via fastboot it does not work.

Hi ..sorry for late question..is this work for tag AL00??

Does it work on Huawei gr3 tag-l21

Honor 8 bricked Tried everything

So I was trying to flash this roll back package to MM on my honor 8 FRD-L19
And boom I was stuck in a boot loop , no battery charging
No dload method working , nor the recovery.
So here's the deal
Frp- locked
Bootloader- locked
I can only get to the fastboot and rescue mode but then I can't flash anything , not even oem unlock
Every command execution gives an error : Failed ( remote command not allowed)
Please somebody help !

No, just the roll back ! After that I was at the bootloop and couldn't do anything about it.

Rommco05 said:
U flash both rollback mad Marshmallow, right? Both was successful done?
Click to expand...
Click to collapse
Rommco05 said:
Put to dload full firmware of Marshmallow from official site, or u try already?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
U use right rollback packages, it seems like no
Click to expand...
Click to collapse
The dload isn't happening, I'm not sure what went wrong. I can't access dload , only fastboot and rescue mode and then can't flash anything. Shows an error Failed ( remote command not allowed)

How much is the rollback package if it was about 77 mb ,
It locks the phone, you have to flash the another firmware (offical one).
Dload to it .
Make sure ur phone is power off and do 3 button trick. Not worked then follow below
If there is no charge then make sure your phone is power odf and hold the both volumes and connect the usb cable to pc and it will update.

Rommco05 said:
I can unlock bootloader via fastboot, hopefully will unlocked frp too after flash twrp
Click to expand...
Click to collapse
After rollback of small update.app the frp and phone is locked ,we can again unlock it , i did it just a hour ago.

FRD-L09 bootloop after downgrade to B131
Hey folks!
I have similar problem with my FRD-L09. I succesfully downgraded to MM via the 73mb rollback package and the B131 ROM. The phone worked prerfectly. After that I plugged the phone to the charger. When i wanted to grab it noticed the phone keeps restarting and stucked in bootloop. I cant even turn it off
I tryed to get in the recovery menu with the volume up+pwr button combo, but it doesnt work, the phone restarts and shows the boot logo again. If i try to restart and go into the update menu with the 3 buttons method the screen goes black, after a several minutes the phone reboots...
Do you have any idea how can i fix my phone?
Thanks in advance,
Mark

venugopalu007 said:
How much is the rollback package if it was about 77 mb ,
It locks the phone, you have to flash the another firmware (offical one).
Dload to it .
Make sure ur phone is power off and do 3 button trick. Not worked then follow below
If there is no charge then make sure your phone is power odf and hold the both volumes and connect the usb cable to pc and it will update.
Click to expand...
Click to collapse
Yes it was about 77 mb
I'm trying to flash one via dload but it's not happening
I'm gonna try the further and I shall let you know what happens then

Rommco05 said:
When phone start rebooting hold vol up, if u boot to recovery make factory reset
Click to expand...
Click to collapse
Yep, i tried that. I cant get into the recovery. As i wrote, it didnt work because of the phone rings and restarts itself.

Quick question: where can I get the official Honor 8 FRD-L04 firmware (USA version)? I have a phone I'm trying to put stock MM firmware on, I'm able to get into fastboot mode. I just want the firmware that is suitable for that phone version. I need a flashing method that will give me zero errors, as in if I flash something like "SYSTEM.img" I won't get uploading errors.
Status:
Bootloader: locked
FRP: unlocked

Rommco05 said:
You can find it in development section and thread is named all stock firmwares or something like that, here is the for you. Is good frp unlocked
Click to expand...
Click to collapse
Ok, but I need a guide that actually works. I have the official firmware, I just need to flash it with no problems. I've tried many tutorials from youtube but none of them have worked. The "Vol - Vol + Power" button method doesn't work for me. I have also tried Huawei Multi-tool and all I get by using the unbrick function is "FAILED(partition error, or sparse write failure). I can go into erecovery mode, but everytime I try to restore it says "getting package info failed".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

amansaini said:
Yes it was about 77 mb
I'm trying to flash one via dload but it's not happening
I'm gonna try the further and I shall let you know what happens then
Click to expand...
Click to collapse
Then after do a big dload of official firmware , your phone will be unbricked.

Rommco05 said:
Ok, your last firmware was Nougat and you have successfully installed rollback packages?
Click to expand...
Click to collapse
I haven't been able to install any kind of stock firmware, that's the issue. From the image I uploaded I'm having trouble flashing the 2 stock files "CUST.img" and "SYSTEM.img". They simply don't go through.

Rommco05 said:
You have FRP unlocked what is really good. U can unlock bootloader and flash twrp after via twrp install firmware, what u think about this?
Click to expand...
Click to collapse
That's good, and I just installed TWRP. Is there a .zip file to be able to flash the official firmware? I have Update.app but its not in .zip, can I rename the extension and try flashing as update.zip?

Rommco05 said:
Which twrp excatly u have installed, is a important. No u cant I send u zip but need to know twrp version
Click to expand...
Click to collapse
TWRP 3.1.1

venugopalu007 said:
Then after do a big dload of official firmware , your phone will be unbricked.
Click to expand...
Click to collapse
sir , its not happening , Dload is not working , i am also trying two buttons while attaching to usb, still nothing ,again it got to the honor screen and stuck in bootloop and then restart.
when i dload , it just shows the red charge bolt sign and then the led flashes 4-5 times and then off

Rommco05 said:
Ok, last question. Your model is FRD-L04C567, right? If yes download this two zips :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v72309/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...09/f1/full/hw/usa/update_data_full_hw_usa.zip
Flash first region zip and after update zip. After instalation go to reboot and make reboot recovery. Now u will be in stock recovery and tap factory reset, after reboot, probably now you boot to rom
Click to expand...
Click to collapse
Thank you so much for this guide and for providing the files to flash the stock ROM. It worked! Can I relock the bootloader after as well? To get rid of that message saying "this phone can't be trusted".

venugopalu007 said:
Then after do a big dload of official firmware , your phone will be unbricked.
Click to expand...
Click to collapse
Rommco05 said:
Youre welcome, no problem yes sure you now can relock >> fastboot eom relock yourunlockcode
---------- Post added at 08:11 ---------- Previous post was at 08:09 ----------
Leave him fully discharged if this dont help I think u need to go service. How this happened? You can use your warranty?
Click to expand...
Click to collapse
i can't go to the Customer care since i'm in India and only USA cc can attend to it.
I'm trying after fully discharge too. the most i get is a green charging circle which says 6% and then it reboots or i think try to boot further automatically then it goes to boot loop again and we are at square one

One last question: after the stock 7.0 installation, I wanted to install the B385 update of EMUI 5.0, I tried the automatic method but the message I get is "Failed to check update package". Is there a solution towards this that can enable this update to install?

Rommco05 said:
Can u post screenshots which exactly u want install? Basically if u want manually install some firmware must be labelled with -PV on end name of firmware
Click to expand...
Click to collapse

Rommco05 said:
Try this one which I select
Click to expand...
Click to collapse
Where can I get the firmware? And the installation method? I don't have Firmware Finder.

Going back to stock rom.

Hello
I used RROS but the phone is heating up to 48 degree
I used to Lineages OS but the camera really bad
I used Carbon ROM. Not liked it.
I want to back stock rom again. But how?

Rommco05 said:
Which model?
Click to expand...
Click to collapse
bklal20
I did it. now using stock rom. thanks.

I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675

ozergul said:
bklal20
I did it. now using stock rom. thanks.
Click to expand...
Click to collapse
yashrathi9 said:
I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675
Click to expand...
Click to collapse
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img

ozergul said:
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img
Click to expand...
Click to collapse
its bricked now :/

Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yashrathi9 said:
its bricked now :/
Click to expand...
Click to collapse
Bootloop? Flash kernel also and repeat these steps

Arrandale said:
Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
Click to expand...
Click to collapse
Ramdisk and recovery_ramdisk

ozergul said:
Bootloop? Flash kernel also and repeat these steps
Click to expand...
Click to collapse
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?

yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution

ozergul said:
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution
Click to expand...
Click to collapse
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?

yashrathi9 said:
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?
Click to expand...
Click to collapse
What's the phone model you have?
Did you flash correct files i hope.

ozergul said:
What's the phone model you have?
Did you flash correct files i hope.
Click to expand...
Click to collapse
i have bkl-l09 c675 but no files were available for c675 so i tried flashing the global version ie bkl-l09 c432.

yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?

FreebleMined_FR said:
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?
Click to expand...
Click to collapse
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.

yashrathi9 said:
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.
Click to expand...
Click to collapse
Try to use this method
https://forum.xda-developers.com/8-lite/how-to/guide-unbrick-huawei-p8-lite-2017-honor-t3766652
If your router does not allow you to do that, use DC-Phoenix or Funkyhuawei, but it's a last resort

I think you did something wrong. I used this method 2 times.

recovery for infinix hot 9

Home
Twrp infinix hot 9
Model : X655C
Device Info : Dynamic partition arm 64 ab.{system+vendor+product
= super.img}
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
Not try custom / gsi rom install twrp (fastboot to custom rom install)
INSTALLATION:
1. Download Recovery.zip from below. Copy to adb folder.
commands.
2. adb reboot bootloader
3. fastboot flash vbmeta vbmeta.img
4. fastboot flash recovery twrp.img
5. fastboot reboot recovery. wait twrp boot now. twrp open.
6. wipe option ->format data->yes typing then enter and back
7. Reboot options -> recovery click wait reboot to recovery
8. Install options ->sdcard to Magisk.zip flash
9.reboot-system
10. phone on
11. success Twrp and root
# Twrp recovery download link:
X655C-H6211ABKG-Q-OP: twrp_x655c_H6211ABKG-Q-OP
Twrp version: 3.5.2_10
Update:5/august/2022
DEVICE TREE: x655c_h6211abkg-q-op
**WORKING
• BackUp and Rename img to flash
•System, vendor, product img flash work
**BUGS
• data unable to mount( format data - yes to used)
•system-prodact - vendor writre not work
• android 12 does not work
Twrp build By Parvej0099

why does it take so long to booting to twrp?

lordlucifer666 said:
why does it take so long to booting to twrp?
Click to expand...
Click to collapse
astboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery twrpname.img
fastboot reboot recovery
THIS WILL NOT BOOT IN SYSTEM! get the logs while in TWRP
adb pull /tmp/recovery.log
adb logcat -d > logcat.txt
then send her. Tarp boot

lordlucifer666 said:
why does it take so long to booting to twrp?
Click to expand...
Click to collapse
Bro new twrp download .
Twrp booted

Hello I want to comment on a problem I have to know if you can guide me to know if the problem is related to the software or not. I have an Infinix hot 9 x655c and the problem is that it restarts infinitely without any reason. the cell receives normal charge and pemite flashing firmaware without any problem. In addition to the phone reboot also restarts when entering the recovery mode. I have tried to install the latest version of the firmaware and also with other previous versions of firmware and in all cases the same problem. thank you in advance.

Sifcae said:
Hello I want to comment on a problem I have to know if you can guide me to know if the problem is related to the software or not. I have an Infinix hot 9 x655c and the problem is that it restarts infinitely without any reason. the cell receives normal charge and pemite flashing firmaware without any problem. In addition to the phone reboot also restarts when entering the recovery mode. I have tried to install the latest version of the firmaware and also with other previous versions of firmware and in all cases the same problem. thank you in advance.
Click to expand...
Click to collapse
First tell me how poblem happened ?

Sifcae said:
Hello I want to comment on a problem I have to know if you can guide me to know if the problem is related to the software or not. I have an Infinix hot 9 x655c and the problem is that it restarts infinitely without any reason. the cell receives normal charge and pemite flashing firmaware without any problem. In addition to the phone reboot also restarts when entering the recovery mode. I have tried to install the latest version of the firmaware and also with other previous versions of firmware and in all cases the same problem. thank you in advance.
Click to expand...
Click to collapse
Trying
Full format+ flashing

Parvej789 said:
Trying
Full format+ flashing
Click to expand...
Click to collapse
Try Format All + Download with SP Flash Tool. But failed with the following image error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now my phone won’t turn on.

Sifcae said:
Try Format All + Download with SP Flash Tool. But failed with the following image errorView attachment 5703303
Now my phone won’t turn on.
Click to expand...
Click to collapse
Please visit and vew . problem fixt.
Visit

Sifcae said:
Try Format All + Download with SP Flash Tool. But failed with the following image errorView attachment 5703303
Now my phone won’t turn on.
Click to expand...
Click to collapse
Fast mtk bypas tool to bypass
2nd ful format.
3rd mtk tool to bypas
4th flash .( Tkv , trnsf file uncheck and download)

Parvej789 said:
Please visit and vew . problem fixt.
Visit
Click to expand...
Click to collapse
I run!! download the firmware again thanks to your guide. but it keeps restarting only repeatedly.
I would like to try a custom rom. But I couldn’t find one for this brand and model of infinix.

Hey, the recovery just stuck at the TWRP logo screen.

I can not upload the logcat file

FadyMems said:
Hey, the recovery just stuck at the TWRP logo screen.
Click to expand...
Click to collapse
Boro Wait twrp recovery fixt tomorrow

Parvej789 said:
Boro Wait twrp recovery fixt tomorrow
Click to expand...
Click to collapse
No updates bro?

FadyMems said:
No updates bro?
Click to expand...
Click to collapse
Sorry wait some time

Parvej789 said:
Sorry wait some time
Click to expand...
Click to collapse
What should I learn to help you or to develop such software??

FadyMems said:
What should I learn to help you or to develop such software??
Click to expand...
Click to collapse
Wait some time

FadyMems said:
What should I learn to help you or to develop such software??
Click to expand...
Click to collapse
Bro twrp update.
Please feedback

Parvej789 said:
Bro twrp update.
Please feedback
Click to expand...
Click to collapse
Still the same bro stuck at the twrp logo screen